U. M. Abaqus, , 2006.

M. Adamvalli and V. Parameswaran, Dynamic strength of adhesive single lap joints at high temperature, International Journal of Adhesion and Adhesives, vol.28, issue.6, pp.321-327, 2008.

J. Affagard, F. Mathieu, J. Guimard, and F. Hild, Composites : Part A Identification method for the mixed mode interlaminar behavior of a thermoset composite using displacement field measurements and load data, Composites Part A : Applied Science and Manufacturing, vol.91, pp.238-249, 2016.

C. Andrieu, A. Doucet, R. , and C. P. , Computational Advances for and from Bayesian Analysis, Statistical Science, vol.19, issue.1, pp.118-127, 2004.

K. N. Anyfantis, Finite element predictions of composite-to-metal bonded joints with ductile adhesive materials, Composite Structures, vol.94, pp.2632-2639, 2012.

S. Avril, M. Bonnet, A. S. Bretelle, M. Grédiac, F. Hild et al., Overview of identification methods of mechanical parameters based on full-field measurements, Experimental Mechanics, vol.48, issue.4, pp.381-402, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00274639

H. Awaji and S. Sato, Combined Mode Fracture Toughness Measurement by the Disk Test, Journal of Engineering Materials and Technology, vol.100, pp.175-182, 1978.

L. Banks-sills and J. Schwartz, Fracture testing of Brazilian disk sandwich specimens, International Journal of Fracture, vol.118, issue.3, pp.191-209, 2002.

M. Bonnet and A. Constantinescu, Inverse problems in elasticity, Inverse Problems, vol.21, pp.1-50, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00111264

M. Bornert, F. Brémand, P. Doumalin, J. Dupré, M. Fazzini et al., Assessment of digital image correlation measurement errors : methodology and results, Experimental mechanics, vol.49, issue.3, pp.353-370, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00881043

M. K. Budzik and H. M. Jensen, Bonded bimaterial ring under compressive load, Proceedings of the Institution of Mechanical Engineers, Part L : Journal of Materials : Design and Applications, vol.228, issue.2, pp.100-108, 2014.

H. D. Bui, Inverse problems in the mechanics of materials, 1997.
URL : https://hal.archives-ouvertes.fr/hal-00112713

N. Carrere, C. Badulescu, J. Cognard, L. , and D. , 3D models of specimens with a scarf joint to test the adhesive and cohesive multi-axial behavior of adhesives, International Journal of Adhesion and Adhesives, vol.62, pp.154-164, 2015.

G. Challita and R. Othman, Finite-element analysis of SHPB tests on double-lap adhesive joints, International Journal of Adhesion and Adhesives, vol.30, issue.4, pp.236-244, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01006902

G. Challita, R. Othman, P. Casari, and K. Khalil, Experimental investigation of the shear dynamic behavior of double-lap adhesively bonded joints on a wide range of strain rates, International Journal of Adhesion and Adhesives, vol.31, issue.3, pp.146-153, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01006846

W. W. Chen and B. Song, Split Hopkinson (Kolsky) bar : design, testing and applications, 2010.

Z. Chen, R. D. Adams, D. Silva, and L. F. , Prediction of crack initiation and propagation of adhesive lap joints using an energy failure criterion, Engineering Fracture Mechanics, vol.78, issue.6, pp.990-1007, 2011.

J. Y. Cognard, R. Créac'hcadec, L. Sohier, and P. Davies, Analysis of the nonlinear behavior of adhesives in bonded assemblies-Comparison of TAST and Arcan tests, International Journal of Adhesion and Adhesives, vol.28, issue.8, pp.393-404, 2008.

J. Y. Cognard, R. Créac'hcadec, L. Sohier, L. , and D. , Influence of adhesive thickness on the behaviour of bonded assemblies under shear loadings using a modified TAST fixture, International Journal of Adhesion and Adhesives, vol.30, pp.257-266, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00489162

J. Y. Cognard, P. Davies, B. Gineste, and L. Sohier, Development of an improved adhesive test method for composite assembly design, Composites Science and Technology, vol.65, issue.3-4, pp.359-368, 2005.

J. Y. Cognard, H. Devaux, and L. Sohier, Numerical analysis and optimisation of cylindrical adhesive joints under tensile loads, International Journal of Adhesion and Adhesives, vol.30, issue.8, pp.706-719, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00534267

A. Constantinescu and K. Van, A Global Computational Approach in Engineering Problems, Lecture Notes-AMAS, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00112710

A. Constantinescu and N. Tardieu, On the identification of elastoviscoplastic constitutive laws from indentation tests, Inverse Problems in Engineering, vol.9, issue.1, pp.19-44, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00111325

R. Créac'hcadec, L. Sohier, C. Cellard, G. , and B. , A stress concentrationfree bonded arcan tensile compression shear test specimen for the evaluation of adhesive mechanical response, International Journal of Adhesion and Adhesives, vol.61, pp.81-92, 2015.

S. Cukierman, J. Halary, M. , and L. , Molecular analysis of the viscoelastic properties of epoxy networks as deduced from the study of model systems, Journal of Non-Crystalline Solids, pp.898-905, 1991.

L. F. Da-silva, P. J. Das-neves, R. Adams, and J. Spelt, Analytical models of adhesively bonded joints-Part I : Literature survey, International Journal of Adhesion and Adhesives, vol.29, issue.3, pp.319-330, 2009.

S. Dong, Y. Wang, and Y. Xia, Stress intensity factors for central cracked circular disk subjected to compression, Engineering Fracture Mechanics, vol.71, issue.7, pp.1155-1168, 2004.

S. Dong, Y. Wang, and Y. Xia, A finite element analysis for using Brazilian disk in split Hopkinson pressure bar to investigate dynamic fracture behavior of brittle polymer materials, Polymer Testing, vol.25, issue.7, pp.943-952, 2006.

A. Dorogoy, D. Rittel, and A. Godinger, Modification of the Shear-Compression Specimen for Large Strain Testing, Experimental Mechanics, vol.55, pp.1627-1639, 2015.

, Anthony Janin-Ecole Polytechnique-LMS

A. Dorogoy, D. Rittel, and A. Godinger, A Shear-Tension Specimen for Large Strain Testing, Experimental Mechanics, vol.56, pp.437-449, 2016.

G. Gary, Comportement des métauxmétauxà grande vitesse de déformation. Modélisation, 2001.

G. Gary, DAVID instruction manual, LMS, 2005.

A. Gilat, T. E. Schmidt, and A. L. Walker, Full field strain measurement in compression and tensile split Hopkinson bar experiments, Experimental Mechanics, vol.49, pp.291-302, 2009.

L. Goglio, L. Peroni, M. Peroni, R. , and M. , High strain-rate compression and tension behaviour of an epoxy bi-component adhesive, International Journal of Adhesion and Adhesives, vol.28, issue.7, pp.329-339, 2008.

R. Gras, H. Leclerc, F. Hild, S. Roux, and J. Schneider, Identification of a set of macroscopic elastic parameters in a 3D woven composite : Uncertainty analysis and regularization, International Journal of Solids and Structures, vol.55, pp.2-16, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01166765

D. Grégoire, H. Maigre, J. Réthoré, C. , and A. , Dynamic crack propagation under mixed-mode loading-Comparison between experiments and X-FEM simulations, International Journal of Solids and Structures, vol.44, issue.20, pp.6517-6534, 2007.

V. Grolleau, G. Gary, and D. Mohr, Biaxial Testing of Sheet Materials at High Strain Rates Using Viscoelastic Bars, Experimental Mechanics, vol.48, pp.293-306, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00171907

J. Halary and F. Lauprêtre, Mécanique des matériaux polymères, 2015.

F. Hild and S. Roux, Digital Image Correlation : from Displacement Measurement to Identification of Elastic Properties-a Review, Strain, vol.42, pp.69-80, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00013816

A. Janin, A. Constantinescu, D. Weisz-patrault, R. Neviere, M. Stackler et al., An experimental technique for the characterization of adhesive joints under dynamic multiaxial loadings, Procedia Engineering, vol.197, pp.52-59, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01632922

F. Jiang and K. S. Vecchio, Hopkinson Bar Loaded Fracture Experimental Technique : A Critical Review of Dynamic Fracture Toughness Tests, Applied Mechanics Reviews, vol.62, issue.6, p.60802, 2009.

V. Joudon, G. Portemont, F. Lauro, and B. Bennani, Experimental procedure to characterize the mode I dynamic fracture toughness of advanced epoxy resins, Engineering Fracture Mechanics, vol.126, pp.166-177, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01077326

J. Jumel, N. Ben-salem, M. K. Budzik, and M. E. Shanahan, Measurement of interface cohesive stresses and strains evolutions with combined mixed mode crack propagation test and Backface Strain Monitoring measurements, International Journal of Solids and Structures, vol.52, pp.33-44, 2015.

A. J. Kinloch, Adhesion and adhesives : science and technology, 2012.

A. J. Kinloch, M. L. Yuen, and S. D. Jenkins, Thermoplastic-toughened epoxy polymers, Journal of Materials Science, vol.29, issue.14, pp.3781-3790, 1994.

, Anthony Janin-Ecole Polytechnique-LMS

H. Koerber, J. Xavier, C. , and P. , High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation, Mechanics of Materials, vol.42, issue.11, pp.1004-1019, 2010.

H. Kolsky, An investigation of the mechanical properties of materials at very high rates of loading, Proceedings of the Physical Society. Section B, vol.62, issue.11, p.676, 1949.

P. S. Koutsourelakis, A multi-resolution , non-parametric , Bayesian framework for identification of spatially-varying model parameters, Journal of Computational Physics, vol.228, issue.17, pp.6184-6211, 2009.

P. Kuhn, G. Catalanotti, J. Xavier, P. P. Camanho, and H. Koerber, Fracture toughness and crack resistance curves for fi ber compressive failure mode in polymer composites under high rate loading, Composite Structures, vol.182, pp.164-175, 2017.

B. Lecampion and A. Constantinescu, Sensitivity analysis for parameter identification in quasi-static poroelasticity, International Journal for Numerical and Analytical Methods in Geomechanics, vol.29, issue.2, pp.163-185, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00111439

B. Lecampion and J. Gunning, Model selection in fracture mapping from elastostatic data, International Journal of Solids and Structures, vol.44, pp.1391-1408, 2007.

D. Leguillon and E. Sanchez-palencia, Computation of singular solutions in elliptic problems and elasticity, 1987.

J. Lemaitre and J. Chaboche, Mechanics of solid materials, 1994.

L. Liao, T. Sawa, and C. Huang, Experimental and FEM studies on mechanical properties of single-lap adhesive joint with dissimilar adherends subjected to impact tensile loadings, International Journal of Adhesion and Adhesives, vol.44, pp.91-98, 2013.

E. Martin, F. Pavia, A. Ventrella, M. Avalle, E. Lara-curzio et al., A Brazilian Disk Test for the Evaluation of the Shear Strength of Epoxy-Joined Ceramics, International Journal of Applied Ceramic Technology, vol.9, issue.4, pp.808-815, 2012.

F. Mathieu, P. Aimedieu, J. M. Guimard, and F. Hild, Identification of interlaminar fracture properties of a composite laminate using local full-field kinematic measurements and finite element simulations, Composites Part A : Applied Science and Manufacturing, vol.49, pp.203-213, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00848724

D. Morin, G. Haugou, F. Lauro, B. Bennani, and B. Bourel, Elasto-viscoplasticity Behaviour of a Structural Adhesive Under Compression Loadings at Low, Moderate and High Strain Rates, Journal of Dynamic Behavior of Materials, vol.1, issue.2, pp.124-135, 2015.

M. Nakano, K. Kishida, Y. Yamauchi, and Y. Sogabe, Dynamic fracture initiation in brittle materials under combined mode 1/11 loading, Journal de Physique IV, vol.4, pp.4-9, 1994.

J. Neumayer, P. Kuhn, H. Koerber, and R. Hinterhölzl, Experimental Determination of the Tensile and Shear Behaviour of Adhesives Under Impact Loading, Journal of Adhesion, 2015.

, Anthony Janin-Ecole Polytechnique-LMS

T. D. Nguyen and S. Govindjee, Numerical study of geometric constraint and cohesive parameters in steady-state viscoelastic crack growth, International Journal of Fracture, vol.141, issue.1, pp.255-268, 2006.

D. Owen, S. Zhuang, A. Rosakis, R. , and G. , Experimental determination of dynamic crack initiation and propagation fracture toughness in thin aluminum sheets, International Journal of Fracture, vol.90, pp.153-174, 1998.

H. Pang, Mixed mode fracture analysis and toughness of adhesive joints, Engineering Fracture Mechanics, vol.51, issue.4, pp.575-583, 1995.

H. Pang and C. Seetoh, A Compact Mixed Mode (CMM) fracture specimen for adhesive bonded joints, Engineering Fracture Mechanics, vol.57, issue.1, pp.57-65, 1997.

K. Protassov, Analyse statistique de données expérimentales, 2012.

S. L. Raykhere, P. Kumar, R. K. Singh, P. , and V. , Dynamic shear strength of adhesive joints made of metallic and composite adherents, Materials and Design, vol.31, issue.4, pp.2102-2109, 2010.

J. Réthoré, F. Hild, R. , and S. , Extended digital image correlation with crack shape optimization, International Journal for Numerical Methods in Engineering, vol.73, pp.248-272, 2008.

P. Reu, All about Speckles : Aliasing. Experimental Techniques, vol.38, pp.1-3, 2014.

D. Rittel, A hybrid experimental-numerical investigation of dynamic shear fracture, Engineering Fracture Mechanics, vol.72, pp.73-89, 2005.

D. Rittel and H. Maigre, An investigation of dynamic crack initiation in PMMA, Mechanics of Materials, vol.23, pp.229-239, 1996.
URL : https://hal.archives-ouvertes.fr/hal-00111525

C. C. Roth, G. Gary, and D. Mohr, Compact SHPB System for Intermediate and High Strain Rate Plasticity and Fracture Testing of Sheet Metal, Experimental mechanics, vol.55, pp.1803-1811, 2015.

C. C. Roth and D. Mohr, Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets : Experiments and modeling, International Journal of Plasticity, vol.56, pp.19-44, 2014.

S. Roux and F. Hild, Stress intensity factor measurements from digital image correlation : post-processing and integrated approaches, International Journal of Fracture, vol.140, pp.141-157, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00013818

K. Safa and G. Gary, Displacement correction for punching at a dynamically loaded bar end, International Journal of Impact Engineering, vol.37, issue.4, pp.371-384, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00425440

D. Saldanha, C. Canto, L. Da-silva, R. Carbas, F. Chaves et al., Mechanical characterization of a high elongation and high toughness epoxy adhesive, International Journal of Adhesion and Adhesives, vol.47, pp.91-98, 2013.

H. R. Sankar, M. Adamvalli, P. P. Kulkarni, P. , and V. , Dynamic strength of single lap joints with similar and dissimilar adherends, International Journal of Adhesion and Adhesives, vol.56, pp.46-52, 2015.

A. Janin-ecole-polytechnique and -. Bibliographie,

C. Sato and K. Ikegami, Strength of Adhesively-Bonded Butt Joints of Tubes Subjected to Combined High-Rate Loads, The Journal of Adhesion, vol.70, issue.1-2, pp.57-73, 1999.

J. Scales and L. Tenorio, Prior information and uncertainty in inverse problems, Geophysics, vol.66, issue.2, pp.389-397, 2001.
DOI : 10.1190/1.1444930

URL : http://ruelle.mines.edu/~jscales/papers/priorinformation.pdf

J. D. Seidt, V. Kuokkala, J. L. Smith, G. , and A. , Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low , Intermediate and High Strain Rates, Experimental Mechanics, vol.57, issue.2, pp.219-229, 2016.
DOI : 10.1007/s11340-016-0237-z

G. Stamoulis, N. Carrere, J. Cognard, P. Davies, and C. Badulescu, On the experimental mixed-mode failure of adhesively bonded metallic joints, International Journal of Adhesion and Adhesives, vol.51, pp.148-158, 2014.
DOI : 10.1016/j.ijadhadh.2014.03.002

URL : https://hal.archives-ouvertes.fr/hal-01060016

A. Tarantola, Inverse Problem Theory, 2005.

R. Thevamaran and C. Daraio, An Experimental Technique for the Dynamic Characterization of Soft Complex Materials, Experimental Mechanics, vol.54, issue.8, pp.1319-1328, 2014.

D. Tortorelli and P. Michaleris, Design sensitivity analysis : overview and review, Inverse Problems in Engineering, vol.1, issue.1, pp.71-105, 1994.
DOI : 10.1080/174159794088027573

B. Vaì-es, S. Marguet, R. Créac'hcadec, L. Sohier, J. Ferrero et al., , 2017.

, Experimental & numerical study of the Tensile / Compression-Shear Arcan test under dynamic loading, International Journal of Adhesion and Adhesives, vol.78, pp.135-147

J. S. Wang and Z. Suo, Experimental determination of interfacial toughness curves using Brazil-nut-sandwiches, Acta Metallurgica et Materialia, vol.38, issue.7, pp.1279-1290, 1990.

Q. Wang, F. Feng, M. Ni, and X. Gou, Measurement of mode I and mode II rock dynamic fracture toughness with cracked straight through flattened Brazilian disc impacted by split Hopkinson pressure bar, Engineering Fracture Mechanics, vol.78, issue.12, pp.2455-2469, 2011.

S. Xu, J. Huang, P. Wang, C. Zhang, L. Zhou et al., Investigation of rock material under combined compression and shear dynamic loading : An experimental technique, International Journal of Impact Engineering, vol.86, pp.206-222, 2015.

T. Yokoyama, Experimental determination of impact tensile properties of adhesive butt joints with the split Hopkinson bar, The Journal of Strain Analysis for Engineering Design, vol.38, issue.3, pp.233-245, 2003.

Q. B. Zhang and J. Zhao, Quasi-static and dynamic fracture behaviour of rock materials : phenomena and mechanisms, International Journal of Fracture, vol.189, issue.1, pp.1-32, 2014.

H. Zhao, Material behaviour characterisation using SHPB techniques , tests and simulations, Computers and Structures, vol.81, pp.1301-1310, 2003.

H. Zhao and G. Gary, On the use of SHPB techniques to determine the dynamic behavior of materials in the range of small strains, International Journal of Solids and Structures, vol.33, issue.23, pp.3363-3375, 1996.
URL : https://hal.archives-ouvertes.fr/hal-00111561

J. Zhao, W. G. Knauss, R. , and G. , A New Shear-Compression-Specimen for Determining Quasistatic and Dynamic Polymer Properties, Experimental Mechanics, vol.49, issue.3, pp.427-436, 2009.

, Anthony Janin-Ecole Polytechnique-LMS

J. Zhou, Y. Wang, and Y. Xia, Mode-I fracture toughness of PMMA at high loading rates, Journal of Materials Science, vol.41, issue.24, pp.8363-8366, 2006.

, Anthony Janin-Ecole Polytechnique-LMS