C. Atas and O. Sayman, An overall view on impact response of woven fabric composite plates, Compos. Struct, vol.82, pp.336-345, 2008.

M. Karayaka and P. Kurath, Deformation and Failure Behavior of Woven Composite Laminates, J. Eng. Mater. Techology, vol.116, pp.222-232, 1994.

L. Marcin, Modelisation du comportement, de l"endommagement et de la rupture de materiaux compositea renforts tisses pour le dimensionnement robuste de structures, 2010.

P. Boisse, N. Hamila, A. Madeo, G. Hivet, D. Isola et al., The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs : a review, Int. J. Mater. Form, vol.10, issue.4, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01313827

P. Ladeveze and E. L. Dantec, Damage modelling of the elementary ply for laminated composites, Compos. Sci. Technol, vol.43, pp.257-267, 1992.

P. Cazuc, Advancing lightweighting solutions to the industry, 2013.

S. Latieule, Dossier automobile-Les matériaux biosourcés s"imposent en douceur, 2014.

N. Piccirelli and A. Giocosa, Les composites dans l"industrie automobile, 2011.

P. Passebon, Les composites ont rendez-vous avec les hautes cadences, 2015.

L. Fery, Quels composites pour l"automobile de demain?, 2013.

R. N. Yancey, Challenges, Opportunities, and Perspectives on Lightweight Composite Structures: Aerospace Versus Automotive, 2016.

A. M. Abdelhay and M. I. Mubark, ULTRASONIC EVALUATION OF SURFACE ROUGHNESS USING NORMAL INCIDENCE PULSE-ECHO TECHNIQUE, eJournal Nondestruct. Test, vol.9, issue.4, 2004.

S. Gholizadeh, A review of non-destructive testing methods of composite materials, Procedia Structural Integrity, vol.1, pp.50-57, 2016.

E. G. Henneke, W. W. Stinchcomb, and K. L. Reifsnider, Some ultrasonic methods for characterizing response of composite materials, International Sympozium on Ultrasonic materials Characterization, 1980.

F. Maso and J. Mézière, Calcul des propriétés élastiques des tissus utilisés dans les matériaux composites, Rev. l'institut Français du Pétrole, vol.53, issue.1, pp.857-870, 1998.

J. Cunningham, Woven or unwoven fibres?, Materials for Engineering, 2013.

W. Albouy, De la contribution de la visco-élasto-plasticité au comportement en fatigue de composite a matrice thermoplastique et thermodurcissable, INSA Rouen, 2013.

G. Couégnat, Approche multiéchelle du comportement mécanique de matériaux composites à renfort tissé, Alby-Carmaux, 2008.

B. Vieille and L. Taleb, About the influence of temperature and matrix ductility on the behavior of carbon woven-ply PPS or epoxy laminates: Notched and unnotched laminates, Compos. Sci. Technol, vol.71, issue.7, pp.998-1007, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00743445

W. Albouy, B. Vieille, and L. Taleb, Influence of matrix ductility on the hightemperature fatigue behavior of off-axis woven-ply thermoplastic and thermoset laminates, Int. J. Fatigue, vol.63, pp.85-96, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02133005

S. D. Pandita, G. Huysmans, M. Wevers, and I. Verpoest, Tensile fatigue behaviour of glass plain-weave fabric composites in on-and off-axis directions, Compos. Part A Appl. Sci. Manuf, vol.32, issue.10, pp.1533-1539, 2001.

. , Conditioning of Ultramid modlings, 2016.

M. Chanda and S. K. Roy, Plastics Technology Handbook, 2007.

A. Launay, Y. Marco, M. H. Maitournam, and I. Raoult, Modelling the influence of temperature and relative humidity on the time-dependent mechanical behaviour of a short glass fibre reinforced polyamide, Mech. Mater, vol.56, pp.1-10, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00778275



M. F. Arif, F. Meraghni, Y. Chemisky, N. Despringre, and G. Robert, In situ damage mechanisms investigation of PA66/GF30 composite: Effect of relative humidity, Compos. Part B Eng, vol.58, pp.487-495, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01513629

G. W. Ehrenstein and R. P. Theriault, Polymeric materials: structure, properties, applications, 2001.

M. F. Ashby and D. R. Jones, Matériaux 2. microstructure et mise en oeuvre, 1991.

M. F. Herman, Encyclopedia of Polymer Science and Technology, 2013.

V. Miri, O. Persyn, J. Lefebvre, and R. Seguela, Effect of water absorption on the plastic deformation behavior of nylon 6, Eur. Polym. J, vol.45, issue.3, pp.757-762, 2009.

A. Malpot, F. Touchard, and S. Bergamo, Etude du comportement en fatigue d " un composite à matrice thermoplastique tissé de fibres de verre pour application automobile Study of the behaviour of a woven glass-fibre-reinforced composite with a thermoplastic matrix for automotive application, Journées Nationales des Compositees 19, pp.1-9, 2015.

T. Osada, A. Nakai, and H. Hamada, Initial fracture behavior of satin woven fabric composites, Compos. Struct, vol.61, pp.333-339, 2003.

P. Boisse, N. Hamila, E. Vidal-sallé, and F. Dumont, Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile , in-plane shear and bending stiffnesses, Compos. Sci. Technol, vol.71, issue.5, pp.683-692, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00730294

A. Gay, J. Roche, P. Lapeyronnie, and P. Bertrand, Non-destructive inspection of initial defects of PA6. 6-GF50 / aluminum self-piercing riveted joints and damage monitoring under mechanical static loading, Int. J. Damage Mech, vol.26, issue.8, pp.1127-1146, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01461497

J. L. Rose, K. M. Rajana, and M. K. Hansch, Ultrasonic Guided Waves for NDE of Adhesively Bonded Structures, J. Adhes, vol.50, issue.1, pp.71-82, 1995.

P. Cawley and D. Alleyne, The use of Lamb waves for the long range inspection of large structures, Ultrasonics, vol.34, issue.2, pp.287-290, 1996.

Z. Su, L. Ye, and Y. Lu, Guided Lamb waves for identification of damage in composite structures : A review, J. Sound Vib, vol.295, pp.753-780, 2006.

M. Pastor, C. Garnier, and C. Pescay, Comparison of two Non-destructive Tests in Carbon/Epoxy Composites, J. Mater. Sci. Eng, vol.4, issue.10, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00949835

L. Satyanarayan, J. M. Vander-weide, and N. F. Declercq, Ultrasonic polar scan imaging of damaged fiber reinforced composites, Mater. Eval, pp.733-739, 2010.

J. Liu and N. F. Declercq, Ultrasonic geometrical characterization of periodically corrugated surfaces, Ultrasonics, vol.53, pp.853-861, 2013.

Q. Shen, M. Omar, and S. Dongri, Ultrasonic NDE Techniques for Impact Damage Inspection on CFRP Laminates, J. Mater. Sci. Res, vol.1, issue.1, pp.2-16, 2011.

A. Osman, U. Hassler, V. Kaftandjian, and J. Hornegger, An automated data processing method dedicated to 3D ultrasonic non destructive testing of composite pieces, IOP Conference Series Materials Science and Engineering International-Symposium on Ultrasound in the Control of Industrial Processes, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00904901

C. Garnier, M. Pastor, F. Eyma, and B. Lorrain, The detection of aeronautical defects in situ on composite structures using Non Destructive Testing, Compos. Struct, vol.93, issue.5, pp.1328-1336, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01005683

J. Dong, B. Kim, A. Locquet, P. Mckeon, N. F. Declercq et al., Nondestructive evaluation of forced delamination in glass fiber-reinforced composites by terahertz and ultrasonic waves, Compos. Part B Eng, vol.79, pp.667-675, 2015.

S. Cenaero and M. , Comparison and complementary of non-destructive evaluation technologies on composite materials, 2013.

F. Destic and C. Bouvet, Impact damages detection on composites materials by THz imaging, Case Stud. Nondestruct. Test. Eval, vol.6, pp.53-62, 2016.

D. K. Hsu and D. J. Barnard, An exploration of the utilities of terahertz waves for the NDE of composites, 2010.

M. F. Markham, Measurement of the elastic constants of fibre composites by ultrasonics, Composites, vol.1, issue.2, pp.145-149, 1969.

P. Marguères, F. Meraghni, and M. L. Benzeggagh, Comparison of stiffness measurements and damage investigation techniques for a fatigued and post-impact fatigued GFRP composite obtained by RTM process, Compos. Part A Appl. Sci. Manuf, vol.31, pp.151-163, 2000.

P. Marguères and F. Meraghni, Damage induced anisotropy and stiffness reduction evaluation in composite materials using ultrasonic wave transmission, Compos. Part A Appl. Sci. Manuf, vol.45, pp.134-144, 2013.

W. Hufenbach, T. Ritschel, R. Böhm, and A. Langkamp, Ultrasonic determination VIII), p.251

, of anisotropic damage in fibre and textile reinforced composite materials, Conference on Damage in Composite Materials, 2006.

S. Baste and C. Aristégui, Induced anisotropy and crack systems orientations of a ceramic matrix composite under off-principal axis loading, Mech. Mater, vol.29, issue.1, pp.19-41, 1998.

A. Dalmaz, D. Ducret, R. E. Guerjouma, P. Reynaud, P. Franciosi et al., Elastic moduli of a 2.5D C f / SiC composite : experimental and theoretical estimates, Compos. Sci. Technol, vol.60, 2000.

J. L. Rose, J. J. Ditri, Y. Huang, D. P. Dandekar, and S. Chou, One-sided ultrasonic inspection technique for the elastic constant determination of advanced anisotropic materials, J. Nondestruct. Eval, vol.10, issue.4, pp.159-166, 1991.

S. I. Rokhlin and W. Wang, Ultrasonic evaluation of in plane and out of plane elastic properties of composite materials, Rev. Prog. Quant. Nondestruct. Eval, vol.8, issue.B, pp.1489-1496, 1989.

S. I. Rokhlin and W. Wang, Double through transmission bulk wave method for ultrasonic phase velocity measurement and determination of elastic constants of composite materials, J. Acoust. Soc. Am, vol.91, issue.6, pp.3303-3312, 1992.

M. Mah and D. R. Schmitt, Determination of the complete elastic stiffnesses from ultrasonic phase velocity measurements, J. Geophys. reasearch, vol.108, pp.1-11, 2003.

E. Grippon, S. Baste, E. Martin, C. Aristegui, and G. Couégnat, Caractérisation ultrasonore et modélisation multi-échelle de l"endommagement sous charge d"un composite 3D SiC/SiC, Congrés Français de Mécanique, pp.3-8, 2013.

B. Audoin, S. Baste, and B. Castagnede, Estimation de l"intervalle de confiance des constantes d"élasicité identidiées à partir des vitesses de propagation ultrasonore, Compte rendus Acad. des Sci, vol.312, issue.2, pp.676-686, 1991.

M. Kersemans, I. De-baere, J. Degrieck, K. Van-den-abeele, L. Pyl et al., Nondestructive damage assessment in fiber reinforced composites with the pulsed ultrasonic polar scan, Polym. Test, vol.34, pp.85-96, 2014.

N. F. Declercq, J. Degrieck, and O. Leroy, On the influence of fatigue on ultrasonic polar scans of fiber reinforced composites, Ultrasonics, vol.42, issue.1-9, pp.173-177, 2004.

N. F. Declercq, J. Decrieck, and O. Leroy, Ultrasonic polar scans Numerical simulation on generally, Ultrasonics, vol.45, pp.32-39, 2006.

N. F. Declercq, J. Degrieck, and O. Leroy, Simulations of harmonic and pulsed VIII) References 252 ultrasonic polar scans, NDT E Int, vol.39, issue.3, pp.205-216, 2006.

S. W. Herbison and N. F. Declercq, Theoretical and experimental ultrasonic investigation of a thin plate with regions of different periodic double-corrugations, J. Acoust. Soc. Am, vol.123, issue.5, 2008.

S. W. Herbison and N. F. Declercq, Diffraction phenomena associated with a composite plate containing an interior periodically corrugated interface, J. Acoust. Soc. Am, vol.123, issue.5, 2008.

S. W. Herbison, Ultrasonic Diffraction Effects On Periodic Surfaces, 2011.

M. Kersemans, W. Van-paepegem, D. Van-nuffel, G. Luyckx, I. De-baere et al., Polar Scan Technique for Material Characterization and Identification of New Operating Regimes, International Conference on Experimental Mechanics, vol.1, pp.1-12, 2010.

J. L. Rose, Ultrasonic waves in solid media, 1999.

N. and A. H. , Wave propagation in layered anisotropic media, North Holl, 1995.

W. H. Ong, N. Rajic, W. K. Chiu, and C. Rosalie, Determination of the elastic properties of woven composite panels for Lamb wave studies, Compos. Struct, vol.141, pp.24-31, 2016.

E. Moreno, N. Galarza, B. Rubio, and J. A. Otero, Phase Velocity Method for Guided Wave Measurements in Composite Plates, Phys. Procedia, vol.63, pp.54-60, 2015.

W. Gao, C. Glorieux, and J. Thoen, Laser ultrasonic study of Lamb waves : determination of the thickness and velocities of a thin plate, Int. J. Eng. Sci, vol.41, pp.219-228, 2003.

H. J. Shin and S. Song, Observation of Lamb Wave Mode Conversion on an Aluminum Plate, 15th World Conference on Non-Destructive Testing, 2000.

P. Mckeon, S. Yaacoubi, N. F. Declercq, S. Ramadan, and W. K. Yaacoubi, Baseline subtraction technique in the frequency-wavenumber domain for high sensitivity damage detection, Ultrasonics, vol.54, issue.2, pp.592-603, 2014.

D. N. Alleyne and P. Cawley, A 2-dimensional Fourier transform method for the quantitative measurement of Lamb modes, Proc. IEEE Ultrason. Symp, vol.2, pp.1143-1146, 1990.

M. R. Karim and A. K. , Determination of the elastic constants of composites VIII) References 253 through the inversion of Leaky Lamb Waves data, Rev. Prog. Quant. Nondestruct. Eval, vol.9, 1990.

K. Imano and T. Endo, Experimental Study on the Mode Conversion of Lamb Waves in a Metal Plate of Stepped Thickness Using Optical Detection, Int. J. Soc. Mater. Eng. Resour, vol.17, issue.2, pp.201-204, 2010.

W. Li, Y. Cho, J. Lee, and J. D. Achenbach, Assessment of Heat Treated Inconel X750 Alloy by Nonlinear Ultrasonics, Exp. Mech, vol.53, issue.5, pp.775-781, 2013.

J. Jingpin, M. Xiangji, H. Cunfu, and W. Bin, Nonlinear Lamb wave-mixing technique for micro-crack detection in plates, NDT E Int, vol.85, pp.63-71, 2017.

U. Rabe, T. Helfen, M. Weikert, S. Hirsekorn, H. Herrmann et al., Nonlinear ultrasonic testing of carbon fibre reinforced plastics in the very high cycle fatigue regime, Proc. Meet. Acoust, vol.16, pp.1-6, 2012.

G. Ren, J. Kim, and K. Jhang, Relationship between second-and third-order acoustic nonlinear parameters in relative measurement, Ultrasonics, vol.56, pp.539-544, 2015.

U. Dahlen, N. Ryden, and A. Jakobsson, Damage identification in concrete using impact non-linear reverberation spectroscopy, NDT E Int, vol.75, pp.15-25, 2015.

M. Meo, U. Polimeno, and G. Zumpano, Detecting damage in composite material using nonlinear elastic wave spectroscopy methods, Appl. Compos. Mater, vol.15, pp.115-126, 2008.

K. E. Van-den-abeele, A. Sutin, J. Carmeliet, and P. A. Johnson, Micro-damage diagnostics using nonlinear elastic wave spectroscopy (NEWS), NDT E Int, vol.34, pp.239-248, 2001.

L. Ostrovsky and P. A. Johnson, Dynamic nonlinear elasticity in geo materials, Riv. del Nuovo Cim. della Soc. Ital. di Fis, vol.24, issue.7, pp.1-46, 2001.

L. ,

S. N. Ostrovsky, J. N. Gurbatov, and . Didenkulov, Nonlinear Acoustics in Nizhni Novgorod ( A Review ), vol.51, pp.114-127, 2005.

K. Van-den-abeele and J. Visscher, Damage assessment in reinforced concrete using spectral and temporal nonlinear vibration techniques, Cem. Concr. Res, vol.30, issue.9, pp.1453-1464, 2000.

V. Genovés, L. Soriano, M. Borrachero, J. Eiras, and J. Payá, Preliminary study on short-term sulphate attack evaluation by non-linear impact resonance acoustic spectroscopy technique, Constr. Build. Mater, vol.78, pp.295-302, 2015.

K. E. Van-den-abeele, P. Johnson, and A. Sutin, Nonlinear Elastic Wave VIII) References, vol.254

, NEWS) Techniques to Discern Material Damage, Part II: SingleMode Nonlinear Resonance Spectroscopy (NWMS), Res. Nondestruct. Eval, vol.12, issue.1, pp.17-30, 2000.

A. Quiviger, J. Zardan, J. Chaix, C. Payan, V. Garnier et al., Caracterisation Ultrasonore de Fissures dans les Bétons Méthodes Linéaires et Non Linéaires, 2010.

K. E. Van-den-abeele, P. Johnson, and . Sutin, Nonlinear Elastic Wave Spectroscopy (NEWS) Techniques to Discern Material Damage, Part I: Nonlinear Wave Modulation Spectroscopy (NWMS), Res. Nondestruct. Eval, vol.12, issue.1, pp.17-30, 2000.

F. Aymerich and W. J. Staszewski, Experimental Study of Impact-Damage Detection in Composite Laminates using a Cross-Modulation Vibro-Acoustic Technique, Struct. Heal. Monit, vol.9, issue.0, pp.541-553, 2010.

T. B. Helfen, Nichtlinearer Ultraschall zur Charakterisierung von Ermüdungsschäden während der Hochfrequenz-Beanspruchung von C-FaserKunststoffverbunden, 2014.

M. Herraiz and A. F. Espinosa, Coda Waves-A Review, Pageoph, vol.125, issue.4, pp.499-577, 1987.

P. Fröjd and P. Ulriksen, Amplitude and phase measurements of continuous diffuse fields for structural health monitoring of concrete structures, NDT E Int, vol.77, pp.35-41, 2016.

R. Livings, V. Dayal, and D. Barnard, Coda wave interferometry for the measurement of thermally induced ultrasonic velocity variations in CFRP laminates, AIP Conf. Proc, vol.1706, 2016.

R. Livings, V. Dayal, and D. Barnard, Feasibility of detecting fatigue damage in composites with coda waves, AIP Conf. Proc, vol.1650, pp.1130-1139, 2015.

G. Briotti and C. Scarponi, Ultrasonic NDI Detection of Delaminations on, J. Reinf. Plast. Compos, vol.20, issue.1, pp.76-87, 2001.

Z. Liu, J. Huang, and J. Li, Comparison of four techniques for estimating temporal change of seismic velocity with passive image interferometry, Earthq. Sci, vol.23, issue.5, pp.511-518, 2010.

J. E. Michaels and T. E. Michaels, Detection of structural damage from the local temporal coherence of diffuse ultrasonic signals, IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol.52, issue.10, pp.1769-1782, 2005.

Y. Zhang, O. Abraham, V. Tournat, A. L. Duff, B. Lascoup et al., VIII) References, p.255

O. Durand, Validation of a thermal bias control technique for Coda Wave Interferometry (CWI), Ultrasonics, vol.53, issue.3, pp.658-664, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01165123

Y. H. Kim, S. Song, and S. Kwon, Measurement of phase velocity dispersion curves and group velocities in a plate using leaky Lamb waves, Conference and exhibition on Non Destructive Evaluation 2002-ISNT, 2002.

S. Lomov, D. S. Ivanov, I. Verpoest, A. E. Bogdanovich, D. Mungalov et al., Predictive analyses and experimental validations of effective elastic properties of 2D and 3D woven composites, 13th European Conference on Composite Materials (ECCM-13), 2008.

R. E. Guerjouma and S. Baste, Evaluation of anisotropic damage in ceramicceramic (SiC-SiC) composite by ultrasonic method, Ultrasonic international, pp.895-900, 1989.

S. Baste and B. Audoin, On internal variable in anisotropic damage, Eur. J. Mech, vol.10, issue.6, pp.587-606, 1991.

E. ?. Ma?eika and L. Draudvilien?, Influence of the dispersion on measurement of phase and group velocities of Lamb waves, Ultrasound, vol.64, issue.4, pp.18-21, 2009.

L. Draudviliene, H. A. Aider, O. Tumsys, and L. Mazeika, The Lamb waves phase velocity dispersion evaluation using an hybrid measurement technique, Compos. Struct, vol.184, pp.1156-1164, 2017.
DOI : 10.1016/j.compstruct.2017.10.060

URL : https://doi.org/10.1016/j.compstruct.2017.10.060

S. Eckel, F. Meraghni, P. Pomarède, and N. F. Declercq, Investigation of Damage in Composites Using Nondestructive Nonlinear Acoustic Spectroscopy, Exp. Mech, 2016.
DOI : 10.1007/s11340-016-0222-6

URL : https://hal.archives-ouvertes.fr/hal-01415370

, DIN IEC 268-2:1994-08, Elektroakustische Geräte-Tl. 2 Allg. Begr. und Berechnungsverfahren (lEC 268-2 1987 + A1 1991) Dtsch. Fassung HD 483, vol.2, 1993.

, Elektroakustische Geräte-Tl. 3 Verstärker (IEC 60268-32013), Dtsch. Fassung EN, pp.60268-32013

N. Yoder, File Exchange. MATLAB Central, vol.13, 2014.

S. C. Stähler, C. Sens-schönfelder, and E. Niederleithinger, Monitoring stress changes in a concrete bridge with coda wave interferometry, J. Acoust. Soc. Am, vol.129, issue.4, pp.1945-1952, 2011.

Y. Zhang, Contrôle de santé des matériaux et structures par analyse de la coda ultrasonore, 2013.

B. N. Cox and G. Flanagan, Handbook Composites of Analytical Methods for Textile, 1997.

F. Praud, G. Chatzigeorgiou, Y. Chemisky, and F. Meraghni, Modélisation multiéchelle des composites tissés à matrice thermoplastique sous chargements cycliques non proportionnels, JNC 20 : Journées Nationales sur les Composites, 2017.

B. Vieille and W. Albouy, About the applicability of a simple model to predict the fatigue life and behavior of woven-ply thermoplastic laminates at T > T g, Compos. Part B Eng, vol.61, pp.181-190, 2014.

F. A. Myers, Stress-state effects on the viscoelastic response of PPS based thermoplastic composites, Advances in Thermoplastic Matrix Composite Materials, ASTM STP 1, pp.154-162, 1989.

C. Potel, Propagation et Contrôle Non Destructif dans les solides-AC03, Master's degree course From Master Sciences et Technologie Mention "Acoustique et Mécanique

M. Kersemans, N. Lammens, J. Degrieck, K. Van-den-abeele, L. Pyl et al., Extraction of bulk wave characteristics from a pulsed ultrasonic polar scan, Wave Motion, vol.51, issue.7, pp.1071-1081, 2014.

G. Huang, F. Song, and X. Wang, Quantitative modeling of coupled piezoelastodynamic behavior of piezoelectric actuators bonded to an elastic medium for structural health monitoring: A review, Sensors, vol.10, issue.4, pp.3681-3702, 2010.

C. M. Yeum, Lamb Wave Mode Decomposition, 2016.

T. Planès and E. Larose, A review of ultrasonic Coda Wave Interferometry in concrete, Cem. Concr. Res, vol.53, pp.248-255, 2013.

N. Hongkarnjanakul, Modélisation numérique pour la tolérance aux dommages d"impact sur stratifié composite : de l"impact à la résistance résiduelle en compression, 2013.