N. , Timber structure-structural timber and glued laminated timber. determination of some physical and mechanical properties, 2012.

, Abaqus analysis user's manual: Volume iv: Elements, ABAQUS, 2004.

S. Aicher and G. Dill-langer, Basic considerations to rolling shear modulus in wooden boards, Otto-Graf-Journal, vol.11, p.157, 2000.

H. G. Allen, Analysis and Design of Structural Sandwich Panels: The Commonwealth and International Library: Structures and Solid Body Mechanics Division, 2013.

S. Ambartsumian, Analysis of two-layer orthotropic shells. Investiia Akad Nauk SSSR, Ot Tekh Nauk, vol.7, pp.93-106, 1957.

S. Ambartsumian, Two analysis method for two-layer orthotropic shells, Izv. An. Arm. SSR Seiya Fiz-Matem nauk, vol.10, issue.2, 1957.

S. Ambartsumian, Theory of Anisotropic plates: strength, stability, vibration, 1970.

M. Arcan, Z. Hashin, and A. Voloshin, A method to produce uniform plane-stress states with applications to fiber-reinforced materials, Experimental mechanics, vol.18, issue.4, pp.141-146, 1978.

A. and D. , Standard methods of testing small clear specimens of timber. Philadelphia (PA), 1981.

W. Ayrton and J. Perry, On struts. The engineer 62, p.464, 1886.

S. Bardet and J. Gril, Modelling the transverse viscoelasticity of green wood using a combination of two parabolic elements, Comptes rendus mécanique, vol.330, issue.8, pp.549-556, 2002.
URL : https://hal.archives-ouvertes.fr/hal-01180629

Z. Bibliography-ba?ant and L. Cedolin, Stability of structures, ASME Appl. Mech. Rev, 1991.

T. Bogensperger, T. Moosbrugger, and G. Silly, Verification of clt-plates under loads in plane, 11th World Conference on Timber Engineering (WCTE2010), 2010.

G. Buffon, Experiences sur la force du bois. second memoire. Memoire de l'Academie Royale des Sciences.â ? A ? TParis, pp.292-334, 1741.

J. Cabrero, C. Blanco, K. Gebremedhin, and A. Martin-meizoso, Assessment of phenomenological failure criteria for wood, European Journal of Wood and Wood Products, vol.70, issue.6, pp.871-882, 2012.

J. Cariou, Caractérisation d'un matériau viscoélastique anisotrope: le bois, 1987.

E. Carrera, Historical review of zig-zag theories for multilayered plates and shells, Applied mechanics reviews, vol.56, issue.3, pp.287-308, 2003.

T. Chow, On the propagation of flexural waves in an orthotropic laminated plate and its response to an impulsive load, Journal of Composite Materials, vol.5, issue.3, pp.306-319, 1971.

P. Ciarlet, Theory of Plates. Studies in Mathematics and its Applications, vol.II, 1997.
URL : https://hal.archives-ouvertes.fr/hal-01803526

P. G. Ciarlet and P. Destuynder, Justification of the 2-dimensional linear plate model, Journal de Mécanique, vol.18, issue.2, pp.315-344, 1979.

F. Colling, Creep behavior of cross laminated timber in service class 2, 2014.

D. and A. , Standard test method for structural panels in planar shear, 2003.

K. B. Dahl and K. Malo, Linear shear properties of spruce softwood, Wood science and technology, vol.43, issue.5-6, pp.499-525, 2009.

K. B. Dahl and K. Malo, Nonlinear shear properties of spruce softwood: experimental results, Wood science and technology, vol.43, issue.7-8, p.539, 2009.

R. Davidson, The influence of temperature on creep in wood, Forest Prod J, vol.12, pp.377-381, 1962.

J. Dumail, K. Olofsson, and L. Salmén, An analysis of rolling shear of spruce wood by the iosipescu method, Holzforschung, vol.54, issue.4, pp.420-426, 2000.

T. Ehrhart, R. Brandner, G. Schickhofer, and A. Frangi, Rolling shear properties of some european timber species with focus on cross laminated timber (clt): test configuration and parameter study, 2015.

C. European-committee-for-standardisation, Eurocode 5-design of timber structures, 1993.

C. European-committee-for-standardisation, Working draft of design of clt in a revised eurocode, pp.5-6

L. Franzoni, A. Lebée, F. Lyon, and G. Foret, Bending behavior of regularly spaced clt panels, Proceeding of the 14th World Conference on Timber Engineering, pp.22-25, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01691273

L. Franzoni, A. Lebée, F. Lyon, and G. Foret, Influence of orientation and number of layers on the elastic response and failure modes on clt floors: modeling and parameter studies, European Journal of Wood and Wood Products, vol.74, issue.5, pp.671-684, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01306593

L. Franzoni, A. Lebée, F. Lyon, and G. Forêt, Elastic behavior of cross laminated timber and timber panels with regular gaps: Thick-plate modeling and experimental validation, Engineering Structures, vol.141, pp.402-416, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01691125

L. Franzoni, A. Lebée, and F. T. Lyon, Closed-form solutions for predicting the thick elastic plate behavior of clt panels with gaps, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01978742

M. French, Vienna plans world's tallest wooden skyscraper, 2015.

C. C. Gerhards, Effect of moisture content and temperature on the mechanical properties of wood: an analysis of immediate effects, Wood and Fiber Science, vol.14, issue.1, pp.4-36, 2007.

V. Goldsmith and P. Grossman, Effect of frequency of vibration on viscoelastic properties of wood, Journal of the Institute of Wood Science, issue.18, p.44, 1967.

R. Görlacher, Ein verfahren zur ermittlung des rollschubmoduls von holz, European Journal of Wood and Wood Products, vol.60, issue.5, pp.317-322, 2002.

P. Gressel, Prediction of long-term deformation-behavior from short-term creep experiments, Holz Als Roh-und Werkstoff, vol.42, issue.8, pp.293-301, 1984.

P. Grossman and R. Kingston, Creep and stress relaxation in wood during bending, Aust. J. Appl. Sci, vol.5, pp.403-417, 1954.

W. Guggenberger and T. Moosbrugger, Mechanics of cross-laminated timber plates under uniaxial bending, WCTE 2006-9th International Conference on Timber Engineering, 2006.

K. Hayashi, B. Felix, and C. Le-govic, Wood viscoelastic compliance determination with special attention to measurement problems, Materials and Structures, vol.26, issue.6, pp.370-376, 1993.

H. Hencky, Über die berücksichtigung der schubverzerrung in ebenen platten, Ingenieur-Archiv, vol.16, issue.1, pp.72-76, 1947.

K. Hibbett and . Sorensen, ABAQUS/standard: User's Manual, Part IV : Elements, vol.1, 1998.

S. Holzer, J. Loferski, and D. Dillard, A review of creep in wood: Concepts relevant to develop long-term behavior predictions for wood structures, Wood and Fiber Science, vol.21, issue.4, pp.376-392, 2007.

N. Iosipescu, New accurate procedure for single shear testing of metals, J MATER, vol.2, issue.3, pp.537-566, 1967.

A. Jakobs, Zur berechnung von brettlagenholz mit starrem und nachgiebigem verbund unter plattenartiger belastung mit besonderer berücksichtigung des rollschubes und der drillweichheit, 2005.

F. F. Kollman and W. A. Côté, Principles of wood science and technology: solid wood, 1968.

H. Kreuzinger, Platten, scheiben und schalen: Ein berechnungsmodell für gängige statikprogramme, vol.1, pp.34-39, 1999.

L. Govic, C. Hadjhamou, A. Rouger, F. Felix, and B. , Modélisation du fluage du bois sur la base dâ ? A ´ Zune équivalence temps-température, Actes du 2e colloque Sciences et Industries du bois, ARBOLOR, pp.349-356, 1988.

A. Lebée and K. Sab, A bending-gradient model for thick plates. part i: Theory, International Journal of Solids and Structures, vol.48, issue.20, pp.2878-2888, 2011.

A. Lebée and K. Sab, A bending-gradient model for thick plates. part ii: Closedform solutions for cylindrical bending of laminates, International Journal of Solids and Structures, vol.48, issue.20, pp.2889-2901, 2011.

A. Lebée and K. Sab, Homogenization of cellular sandwich panels, Comptes Rendus Mécanique, vol.340, issue.4-5, pp.320-337, 2012.

A. Lebée and K. Sab, Justification of the bending-gradient theory through asymptotic expansions, Generalized Continua as Models for Materials, pp.217-236, 2013.

A. Lebée and K. Sab, On the generalization of reissner plate theory to laminated plates: Comparison with the bending-gradient theory, 2015.

A. Lebée and K. Sab, On the generalization of reissner plate theory to laminated plates: Theory. submitted, 2015.

A. W. Leissa, . Ohio, . State, . Research, and . Columbus, Buckling of laminated composite plates and shell panels, 1985.

S. Lekhnitskii, Strength calculation of composite beams, Vestnik inzhen i tekhnikov, vol.9, pp.137-148, 1935.

M. Levinson, An accurate, simple theory of the statics and dynamics of elastic plates, Mechanics Research Communications, vol.7, issue.6, pp.343-350, 1980.

Y. Li, Duration-of-load and size effects on the rolling shear strength of cross laminated timber, 2015.

J. Y. Liu, D. D. Flach, R. J. Ross, and G. J. Lichtenberg, An improved shear test fixture using the losipescu specimen, ASME APPLIED MECHANICS DIVISIONPUBLICATIONS-AMD, vol.231, pp.139-148, 1998.

I. Bibliography-lomhlt, Stadthaus london: Murray grove building, 2015.

A. E. Love, The small free vibrations and deformation of a thin elastic shell, Philosophical Transactions of the Royal Society of London. A, pp.491-546, 1888.
DOI : 10.1098/rsta.1888.0016
URL : http://rsta.royalsocietypublishing.org/content/179/491.full.pdf

J. Mairs, Anders berensson proposes wooden skyscraper with decorative facade for stockholm, 2016.

A. Mårtensson, Mechano-sorptive effects in wooden material, Wood Science and Technology, vol.28, issue.6, pp.437-449, 1994.

A. Matar, The mechano sorptive creep of softwood in bending, 2003.

K. Medlock, Construction of world's tallest building is underway in vancouver, 2016.

P. Mestek, Punktgestützte Flächentragwerke aus Brettsperrholz (BSP): Schubbemessung unter Berücksichtigung von Schubverstärkungen. na, 2011.

R. Mindlin, Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates, Journal of Applied Mechanics, vol.18, pp.31-38, 1951.

C. Montero, Caractérisation du comportement viscoélastique asymptotique du bois, 2010.

T. Moosbrugger, W. Guggenberger, and T. Bogensperger, Cross-laminated timber wall segments under homogeneous shear with and without openings, Proceedings of the 9th World Conference on Timber Engineering, 2006.

D. M. Moses and H. G. Prion, Anisotropic plasticity and the notched wood shear block, Forest products journal, vol.52, issue.6, p.43, 2002.

T. Nakai and P. Grossman, Deflection of wood under intermittent loading, Wood Science and Technology, vol.17, issue.1, pp.55-67, 1983.

P. Navi and F. Heger, Comportement thermo-hydromécanique du bois: Applications technologiques et dans les structures, 2005.

L. F. Nielsen, Power law creep as related to relaxation, elasticity, damping, rheological spectra and creep recoveryâ ? A ? Twith special reference to wood, IUFROEngineering Group Conference, pp.181-204, 1984.

A. K. Noor, Mixed finite-difference scheme for analysis of simply supported thick plates, Computers & Structures, vol.3, issue.5, pp.967-982, 1973.

A. K. Noor, Stability of multilayered composite plates, Fibre Science and Technology, vol.8, issue.2, pp.81-89, 1975.

N. Pagano, Exact solutions for composite laminates in cylindrical bending, Journal of composite materials, vol.3, issue.3, pp.398-411, 1969.

O. Perret, C. Douthe, A. Lebãl'e, and K. Sab, Determination of the equivalentlayer shear stiffness of clt: Closed-form bounds, 2017.

O. Perret, C. Douthe, A. Lebãl'e, and K. Sab, Determination of the equivalentlayer shear stiffness of clt: four-point bending of cfrp sandwich beams, 2017.

O. Perret, A. Lebée, C. Douthe, and K. Sab, The bending-gradient theory for the linear buckling of thick plates: Application to cross laminated timber panels, International Journal of Solids and Structures, vol.87, pp.139-152, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01712204

N. Phan and J. Reddy, Analysis of laminated composite plates using a higher-order shear deformation theory, International Journal for Numerical Methods in Engineering, vol.21, issue.12, pp.2201-2219, 1985.

C. Pirvu and E. Karacabeyli, Time-dependent behaviour of clt, World Conference on Timber Engineering, 2014.

J. Reddy, A refined nonlinear theory of plates with transverse shear deformation, International Journal of solids and structures, vol.20, issue.9, pp.881-896, 1984.

E. Reissner, The effect of transverse shear deformation on the bending of elastic plates, Journal of Applied Mechanics, 1945.

E. Reissner, On transverse bending of plates, including the effect of transverse shear deformation, International Journal of Solids and Structures, vol.11, issue.5, pp.569-573, 1975.

E. Reissner, On a certain mixed variationnal theory and a proposed application, International Journal for Numerical Methods in Engineering, vol.20, pp.1366-1368, 1984.

J. Ren, Bending theory of laminated plate, Composites science and technology, vol.27, issue.3, pp.225-248, 1986.

J. Ren, A new theory of laminated plate, Composites Science and Technology, vol.26, issue.3, pp.225-239, 1986.

J. Ren and D. Owen, Vibration and buckling of laminated plates, International Journal of Solids and Structures, vol.25, issue.2, pp.95-106, 1989.

K. Sab, A. ;. Lebée, R. Brandner, and H. Bauer, Homogenization of heterogeneous thin and thick plates, vol.153, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01266702

, Cross Laminated Timber-A competitive wood product for visionary and fire safe buildings, p.9

A. Schniewind and J. Barrett, Wood as a linear orthotropic viscoelastic material, Wood Science and Technology, vol.6, issue.1, pp.43-57, 1972.

V. Sebera, L. Muszy´nskimuszy´nski, J. Tippner, M. Noyel, T. Pisaneschi et al., Fe analysis of clt panel subjected to torsion and verified by dic, Materials and Structures, vol.48, issue.1-2, pp.451-459, 2015.

N. Shiro, M. Atsushi, S. Tatsuya, A. Yasuhiro, Y. Nobuyoshi et al., Creep and duration of load characteristics of cross laminated timber, Proceedings of the 13th World Conference on Timber Engineering, 2014.

G. Silly, Numerical study on in-plane shear and torsional stiffness of clt, 2010.

C. Stora-enso, Document technique d'application 3/13-750 : Panneaux bois Ã? a usage structurel. AgrÃl'ment Technique EuropÃl'en, 2014.

R. Stürzenbecher, K. Hofstetter, and J. Eberhardsteiner, Structural design of cross laminated timber (clt) by advanced plate theories, Composites Science and Technology, vol.70, issue.9, pp.1368-1379, 2010.

R. Stürzenbecher, K. Hofstetter, and J. Eberhardsteiner, Introduction to cross laminated timber, Wood Design Focus, vol.22, issue.2, p.12, 2012.

A. Thiel, Uls and sls design of clt and its implementation in the cltdesigner, Focus solid timber solutionsâ ? A ? TEuropean conference on cross laminated timber, 2013.

A. Thiel and H. Krenn, Buckling lods for cross-laminated timber elements under uniaxial in-plane compression, Proceedings of the 14th World Conference on Timber Engineering (WCTE 2016), 2016.

A. Thiel and G. Schickhofer, Cltdesigner-a software tool for designing crosslaminated-timber elements: 1d-plate-design, In: World conference on timber engineering, 2010.

S. Timoshenko and J. Gere, Theory of elastic stability, 1961.

M. Touratier, An efficient standard plate theory, International journal of engineering science, vol.29, issue.8, pp.901-916, 1991.

J. Whitney, The effect of transverse shear deformation on the bending of laminated plates, Journal of Composite Materials, vol.3, issue.3, pp.534-547, 1969.

J. Whitney, Stress analysis of thick laminated composite and sandwich plates, Journal of Composite Materials, vol.6, issue.4, pp.426-440, 1972.

J. Whitney and N. Pagano, Shear deformation in heterogeneous anisotropic plates, Journal of Applied Mechanics, vol.37, issue.4, pp.1031-1036, 1970.

P. Yang, C. Norris, and Y. Stavsky, Elastic wave propagation in heterogeneous plates, International Journal of Solids and Structures, vol.2, issue.4, pp.665-684, 1966.

H. Yoshihara and T. Furushima, Shear strengths of wood measured by various short beam shear test methods, Wood science and technology, vol.37, issue.3-4, pp.189-197, 2003.

H. Yoshihara and Y. Kubojima, Measurement of the shear modulus of wood by asymmetric four-point bending tests, Journal of wood science, vol.48, issue.1, pp.14-19, 2002.

H. Yoshihara, Y. Kubojima, K. Nagaoka, and M. Ohta, Measurement of the shear modulus of wood by static bending tests, Journal of wood science, vol.44, issue.1, pp.15-20, 1998.

R. Youngs, The perpendicular-to-grain mechanical properties of red oak related to temperature, moisture content and time, 1957.

Q. Zhou, M. Gong, Y. H. Chui, and M. Mohammad, Measurement of rolling shear modulus and strength of cross laminated timber fabricated with black spruce, Construction and Building Materials, vol.64, pp.379-386, 2014.