, Pour les deux conditions (1000 rpm, ? = 1.6, ? = 375 mm) et (2000 rpm, ? = 1.6, ? = 300 mm), la réduction propre du débit de fuite peut atteindre l'annulation de l'´ ecoulement de retour E ? ? 100%, voire, Modélisation numérique Débit de fuite : La figure 4.25 montre l'´ evolution du gain en débit de fuite. Des réductions considérables sont obtenues, vol.4

. Bibliographie,

B. Lakshminarayana, Fluid dynamics and heat transfer of turbomachinery, 1995.

R. Rey and F. Bakir, Machines centrifuges et helico centrifuges, Cours, 2008.

G. Alain, Bruit des ventilateurs. partie 1. Techniques de l'ingénieur. Génie mécanique, pp.4177-4178, 2002.

J. Mérigoux, Ventilateurs. compresseurs. notions fondamentales. dimensionnement. Techniques de l'ingénieur. Génie mécanique, pp.4500-4501, 1999.

N. A. Cumpsty and E. M. Greitzer, Ideas and methods of turbomachinery aerodynamics : a historical view, Journal of propulsion and power, vol.20, issue.1, pp.15-26, 2004.

H. B. Squire, The secondary flow in a cascade of airfoils in a nonuniform stream, Journal of the Aeronautical Sciences, vol.18, issue.4, pp.271-277, 1951.

B. Gérard, Turbomachines : calcul desécoulementsdesécoulements incompressibles modélisation, 2008.

F. Kameier and W. Neise, Rotating blade flow instability as a source of noise in axial turbomachines, Journal of Sound and Vibration, vol.203, issue.5, pp.833-853, 1997.

J. Boudet, A. Cahuzac, P. Kausche, and M. Jacob, Zonal large-eddy simulation of a fan tip-clearance flow, with evidence of vortex wandering, Journal of Turbomachinery, vol.137, issue.6, p.61001, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01296933

A. Fischer, J. König, J. Czarske, C. Rakenius, G. Schmid et al., Investigation of the tip leakage flow at turbine rotor blades with squealer cavity, Experiments in fluids, vol.54, issue.2, p.1462, 2013.

S. Moreau, . Sanjosé, M. Magne, and . Henner, Aeroacoustic predictions of a low-subsonic axial fan, Proceedings ISROMAC Conference, vol.2012, 2012.

M. Gad-el-hak, Flow control : Passive, active, and reactive flow management, 2000.

H. Oualli, Influence de la vibration radiale et de la rotation d'un cylindre circulaire sur l'´ evolution du sillage proche, 2006.

. Re-longhouse, Control of tip-vortex noise of axial flow fans by rotating shrouds, Journal of sound and vibration, vol.58, issue.2, pp.201-214, 1978.

A. Pogorelov, M. Meinke, and W. Schröder, Effects of tipgap width on the flow field in an axial fan, International Journal of Heat and Fluid Flow, vol.61, pp.466-481, 2016.

D. You, M. Wang, P. Moin, and R. Mittal, Effects of tip-gap size on the tip-leakage flow in a turbomachinery cascade, Physics of Fluids, vol.18, issue.10, p.105102, 2006.

T. Fukano, Y. Takamatsu, and . Kodama, The effects of tip clearance on the noise of low pressure axial and mixed flow fans, Journal of Sound and Vibration, vol.105, issue.2, pp.291-308, 1986.

T. Fukano and Y. Kodama, Prediction of sound power of the low pressure axial and diagonal flow fans, Fan noise symposium, 1992.

M. Inoue, M. Kuroumaru, and . Fukuhara, Behavior of tip leakage flow behind an axial compressor rotor, Journal of Engineering for Gas Turbines and Power, vol.108, issue.1, pp.7-14, 1986.

F. Kameier and . Neise, Experimental study of tip clearance losses and noise in axial turbomachines and their reduction, Journal of Turbomachinery, vol.119, issue.3, pp.460-471, 1997.

B. Pardowitz, A. Moreau, U. Tapken, and L. Enghardt, Experimental identification of rotating instability of an axial fan with shrouded rotor, Proceedings of the Institution of Mechanical Engineers, Part A : Journal of Power and Energy, vol.229, issue.5, pp.520-528, 2015.

J. Vad, C. Horváth, and J. G. Kovács, Aerodynamic and aero-acoustic improvement of electric motor cooling equipment, Proceedings of the Institution of Mechanical Engineers, Part A : Journal of Power and Energy, vol.228, issue.3, pp.300-316, 2014.

. Martin-g-yapp, R. Robert-v-houten, and . Hickey, Housing with recirculation control for use with banded axial-flow fans, US Patent, vol.5, p.186, 1996.

M. Buisson, P. Ferrand, L. Soulat, S. Aubert, S. Moreau et al., Optimal design of an automotive fan using the turbâopty meta-model, Computers & Fluids, vol.80, pp.207-213, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00931518

A. M. Wallis, A. Denton, and . Demargne, The control of shroud leakage flows to reduce aerodynamic losses in a low aspect ratio, shrouded axial flow turbine, ASME Turbo Expo, pp.1-03, 2000.

S. Nadeau and W. Holmes, Turbomachine with double-faced rotor-shroud seal structure, US Patent, vol.6, p.624, 2003.

S. Nadeau, Integral tip seal in a fan-shroud structure, US Patent, vol.6, p.990, 2005.

I. Steven-r-wellborn, T. Tolchinsky, and . Okiishi, Modeling shrouded stator cavity flows in axial-flow compressors, ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition, pp.1-03, 1999.

V. Nezym, A statistical model for the effect of casing treatment recesses on compressor rotor performance. Experimental thermal and fluid science, vol.31, pp.1165-1176, 2007.

A. Pfau, Loss mechanisms in labyrinth seals of shrouded axial turbines, 2003.

V. Schramm, J. Denecke, S. Kim, and S. Wittig, Shape optimization of a labyrinth seal applying the simulated annealing method, International Journal of Rotating Machinery, vol.10, issue.5, pp.365-371, 2004.

C. Sarraf, H. Nouri, F. Ravelet, and F. Bakir, Experimental study of blade thickness effects on the overall and local performances of a controlled vortex designed axial-flow fan, Experimental Thermal and Fluid Science, vol.35, issue.4, pp.684-693, 2011.

J. Hurault, Métrologie instationnaire embarquée pour la modélisation du bruitàbruit`bruità large bande dans les turbomachines, 2010.

A. Aktürk and C. Camci, Axial flow fan tip leakage flow control using tip platform extensions, Journal of Fluids Engineering, vol.132, issue.5, p.51109, 2010.

A. Corsini, F. Rispoli, and . Sheard, Development of improved blade tip endplate concepts for low-noise operation in industrial fans, Proceedings of the Institution of Mechanical Engineers, Part A : Journal of Power and Energy, vol.221, issue.5, pp.669-681, 2007.

A. Corsini, F. Rispoli, and A. G. Sheard, Shaping of tip end-plate to control leakage vortex swirl in axial flow fans, Journal of Turbomachinery, vol.132, issue.3, p.31005, 2010.

. Thomas-a-auxier, Aerodynamic tip sealing for rotor blades, US Patent, vol.5, p.158, 1995.

M. Hamik and R. Willinger, An innovative passive tip-leakage control method for axial turbines : Basic concept and performance potential, Journal of Thermal Science, vol.16, issue.3, pp.215-222, 2007.

J. Hu, X. Kong, Z. Li, Y. Zhang, and J. Xu, Experimental investigation of aerodynamic interaction between tip leakage flow and spontaneous tip injection flow using 2d-piv, Experimental Thermal and Fluid Science, vol.54, pp.127-135, 2014.

M. Eberlinc, B. Sirok, M. Ho?evar, and M. Dular, Experimental investigation of the interaction of two flows on the axial fan hollow blades by flow visualization and hot-wire anemometry, Experimental Thermal and Fluid Science, vol.33, issue.5, pp.929-937, 2009.

M. Eberlinc, B. Sirok, M. Dular, and M. Ho?evar, Modification of axial fan flow by trailing edge self-induced blowing, Journal of Fluids Engineering, vol.131, issue.11, pp.111-104, 2009.

M. Eberlinc, B. Sirok, M. Ho?evar, and M. Dular, Numerical and experimental investigation of axial fan with trailing edge self-induced blowing, Forschung im Ingenieurwesen, vol.73, issue.3, p.129, 2009.

Y. Wang and L. Zhao, Investigation on the effect of trailing edge ejection on a turbine cascade, Applied Mathematical Modelling, vol.37, issue.9, pp.6254-6265, 2013.

S. Sh-rhee, H. Kim, . Ahn, H. Oh, and . Kim, Analysis of a jet-controlled high-lift hydrofoil with a flap. Ocean engineering, vol.30, pp.2117-2136, 2003.

H. J. Weigl, . Paduano, A. H. Lg-frechette, E. M. Epstein, . Greitzer et al., Active stabilization of rotating stall and surge in a transonic single stage axial compressor, ASME 1997 international gas turbine and aeroengine congress and exhibition, pp.4-15, 1997.

L. Neuhaus and W. Neise, Active flow control to improve the aerodynamic and acoustic performance of axial turbomachines, 1st Flow Control Conference, p.2948, 2002.

L. Neuhaus and . Neise, Active control to improve the aerodynamic performance and reduce the tip clearance noise of axial turbomachines with steady air injection into the tip clearance gap, Active Flow Control, pp.293-306, 2007.

C. Scott, J. Morris, and . Foss, An aerodynamic shroud for automotive cooling fans, Journal of fluids engineering, vol.123, issue.2, pp.287-292, 2001.

D. R. Neal and . Foss, The application of an aerodynamic shroud for axial ventilation fans, Journal of fluids engineering, vol.129, issue.6, pp.764-772, 2007.

M. Niu and S. Zang, Experimental and numerical investigations of tip injection on tip clearance flow in an axial turbine cascade, Experimental Thermal and Fluid Science, vol.35, issue.6, pp.1214-1222, 2011.

R. Rey, Methode generale de determination d'un etage de turbomachine axiale de compression (fluide incompressible), 1981.

F. Bakir, Méthode de dimensionnement et d'analyse des machines de compression hélico-centrifuges en régime incompressible, 1992.

V. P. Sifres, Conception et qualification de ventilateurs de refroidissement par rotomoulage, 2013.

A. Hamidi, Modélisation et simulation du rotomoulage réactif du polyuréthane, 2015.

B. Cann, Conception de qualification de ventilateurs de refroidissement par rotomoulage, 2009.

M. Martinez, Procédé innovant dans la conception de ventilateurs de refroidissement moteur automobile : Amélioration et qualification du process de rotomoulage, 2009.

E. Din, 5801. industrial fans-performance testing using standardized airways, 2011.

B. Standard, Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full, pp.5167-5169, 2003.

S. Groupe,

, Deublin Company. www.deublin.com

J. Fanchon, Guide des sciences et technologies industrielles. Nathan, 2013.

H. Schlichting, Boundary-layer theory, Boundary-layer theory, 1979.

, Ansys Fluent, 2015.

R. Florian, M. Menter, R. Kuntz, and . Langtry, Ten years of industrial experience with the sst turbulence model. Turbulence, heat and mass transfer, vol.4, pp.625-632, 2003.

B. Gourmelen, J. , and L. , Air comprimé dans l'industrie, 1997.