Mechanical Properties of Nanocrystalline Metals, Encyclopedia of Nanotechnology, 2012. ,
Propriétés mécaniques des matériaux nanostructurés, p.4029, 2010. ,
Advances in ultrafine-grained materials, Materials Today, vol.16, pp.85-93, 2013. ,
Performance and applications of nanostructured materials produced by severe plastic deformation, Scripta Materialia, vol.51, pp.825-830, 2004. ,
Materials processing by simple shear, Materials Science and Engineering: A, vol.197, pp.157-164, 1995. ,
Principles of equal-channel angular pressing as a processing tool for grain refinement, Progress in Materials Science, vol.51, pp.881-981, 2006. ,
Principle of equal-channel angular pressing for the processing of ultra-fine grained materials, Scripta Materialia, vol.35, pp.143-146, 1996. ,
An upper bound solution of ECAE process with outer curved corner, Journal of Materials Processing Technology, vol.182, pp.555-563, 2007. ,
Mechanical behavior of an aluminium alloy subjected to severe plastic deformation, 2000. ,
Analysis of the billet deformation behaviour in equal channel angular extrusion, Materials Science and Engineering A, vol.287, pp.87-99, 2000. ,
Direct observation of shear deformation during equal channel angular pressing of pure aluminum, Scripta Materialia, vol.41, issue.4, pp.353-357, 1999. ,
Effect of die channel angle, friction and back pressure in the equal channel angular pressing using 3D finite element simulation, Materials Science and Engineering A, vol.527, issue.4-5, pp.1230-1235, 2010. ,
The potential for scaling ECAP: Effect of sample size on grain refinement and mechanical properties, Materials Science and Engineering A, vol.318, issue.1-2, pp.34-41, 2001. ,
Damage evolution under severe plastic deformation, International Journal of Fracture, vol.115, pp.159-172, 2002. ,
Effect of backpressure on structure and properties of AA5083 alloy processed by ECAP, Journal of Alloys and Compounds, vol.378, issue.1-2, pp.233-236, 2004. ,
Investigation of Strain Behavior in the Modified Equal Channel Angular Pressing Die by 3D Finite Element Method, Journal of Applied Sciences, vol.10, issue.20, pp.2411-2418, 2010. ,
Ductile fracture of aluminum 2024-T351 under proportional and non-proportional multi-axial loading: Bao-Wierzbicki results revisited, International Journal of Solids and Structures, pp.459-474, 2015. ,
URL : https://hal.archives-ouvertes.fr/hal-01227222
A dislocation model for the minimum grain size obtainable by milling, Acta Materialia, vol.51, pp.4107-4119, 2003. ,
Effect of Mg content on the minimum grain size of Al-Mg alloys obtained by friction stir processing, Scripta Materialia, vol.64, pp.355-358, 2011. ,
Influence of dislocation -solute atom interactions and stacking fault energy on grain size of single-phase alloys after severe plastic deformation using high-pressure torsion, Acta Materialia, vol.69, pp.1359-6454, 2014. ,
Microstructures and mechanical properties of equal channel angular pressed 5083 Al alloy, Materials Transactions, vol.42, pp.1074-1080, 2001. ,
Evolution of microstructure and texture in an ultrafine-grained Al6082 alloy during severe plastic deformation, Materials Science and Engineering A, vol.490, pp.335-342, 2008. ,
Effect of pressing temperature on fine-grained structure formation in 7475 aluminum alloy during ECAP, Materials Science and Engineering A, vol.381, pp.121-128, 2004. ,
Effect of the velocity of equal-channel angular pressing on the formation of the structure of pure aluminum, Physics of Metals and Metallography, vol.106, issue.4, pp.411-417, 2008. ,
Influence of pressing speed on microstructural development in equal-channel angular pressing, Metallurgical and Materials Transactions A, vol.30, pp.1989-1997, 1999. ,
Failure modes during equal channel angular extrusion of aluminum alloy 2024, Metallurgical and Materials Transactions A, vol.32, pp.1869-1871, 2001. ,
Effect of the deformation path on the ductility of a hypoeutectic AlSi casting alloy subjected to equal-channel angular pressing by routes A, Scripta Materialia, vol.58, issue.2, pp.138-141, 2008. ,
An investigation of microstructural evolution during equal-channel angular pressing, Acta Materialia, vol.45, issue.11, pp.4733-4741, 1997. ,
The process of grain refinement in equal-channel angular pressing, Acta Materialia, vol.46, issue.9, pp.3317-3331, 1998. ,
Influence of ECAP routes on the microstructure and properties of pure Ti, Materials Science and Engineering: A, vol.299, issue.1-2, pp.59-67, 2001. ,
The principles of grain refinement in equal-channel angular pressing, Materials Science and Engineering: A, vol.462, issue.1-2, pp.3-11, 2007. ,
Avoiding cracks and inhomogeneities in billets processed by ECAP, Journal of Materials Science, vol.45, issue.17, pp.4561-4570, 2010. ,
Enhanced tensile ductility of an ultra-fine-grained aluminum alloy, Scripta Materialia, vol.58, pp.163-166, 2008. ,
The effect of strain rate on the deformation mechanisms and the strain rate sensitivity of an ultra-finegrained Al alloy, Scripta Materialia, vol.61, issue.2, pp.181-184, 2009. ,
Theory of the tensile test, Acta metallurgica, vol.15, 1967. ,
Grain-boundary sliding and separation in polycrystalline metals: Application to nanocrystalline fcc metals, Journal of the Mechanics and Physics of Solids, vol.52, issue.11, pp.2587-2616, 2004. ,
Strength and tension / compression asymmetry in nanostructured and ultrafine-grain metals, Acta Materialia, vol.51, pp.4505-4518, 2003. ,
On the failure of pressure sensitive plastic materials. Part II : Comparisns with experiments on ultra-fine grained Fe-10% Cu alloys, Scripta Materialia, vol.36, issue.6, pp.727-732, 1997. ,
Mechanical Properties of An Ultrafine-Grained Al-7 . 5 Pct Mg Alloy, Metallurgical and Materials Transactions A, vol.34, 2003. ,
Mechanical properties of submicron-grained aluminum, Scripta Materialia, vol.52, pp.359-363, 2005. ,
Mechanical Properties of Iron Processed by Severe Plastic Deformation, Metallurgical and Materials Transactions A, vol.34, issue.1, pp.71-83, 2003. ,
Molecular dynamics simulations of tension-compression asymmetry in nanocrystalline copper, Physics Letters A, vol.381, issue.13, pp.1163-1168, 2017. ,
On tension-compression asymmetry in ultrafinegrained and nanocrystalline metals, Computational Materials Science, vol.50, issue.2, pp.639-644, 2010. ,
Origin of tension-compression asymmetry in ultrafine-grained fcc metals, Phys. Rev. Materials, vol.1, pp.33-604, 2017. ,
Flow stress anisotropy and Bauschinger effect in ultrafine grained copper, Acta Materialia, vol.54, pp.5477-5488, 2006. ,
Residual stress distribution of a 6061-T6 aluminum alloy under shear deformation, Materials Science & Engineering A, vol.670, pp.227-232, 2016. ,
Neutron diffraction and finite element analysis of the residual stress distribution of copper processed by equal-channel angular pressing, Materials Science & Engineering A, vol.682, pp.691-697, 2017. ,
Transition from strengthening to softening by grain boundaries in ultrafine-grained Cu, Acta Materialia, vol.52, issue.17, pp.5009-5018, 2004. ,
High strain rate behavior of ultrafine-grained Al-1.5 Mg, Materials Science and Engineering A, vol.496, issue.1-2, pp.308-315, 2008. ,
Cyclic Deformation Behavior of Ultra-Fine Grained Copper Produced by Equal Channel Angular Pressing, Materials Transactions, vol.50, issue.1, pp.70-75, 2009. ,
Cyclic deformation and fatigue properties of very fine-grained metals and alloys, International Journal of Fatigue, vol.32, pp.1413-1427, 2010. ,
Fatigue properties and crack behavior of ultra-fine and nanocrystalline pure metals, International Journal of Fatigue, vol.31, pp.1476-1489, 2009. ,
Fatigue behaviour of light alloys with ultrafine grain structure produced by severe plastic deformation : An overview, International Journal of Fatigue, vol.32, pp.898-907, 2010. ,
On the fatigue crack growth-microstructure relationship in ultrafine-grained interstitialfree steel, Journal of Materials Science, vol.45, issue.17, pp.4813-4821, 2010. ,
The grain boundary geometry for optimum resistance to growth of short fatigue cracks in high strength Al-alloys, International Journal of Fatigue, vol.27, issue.10-12, pp.1202-1209, 2005. ,
Modelling of the scatter in short fatigue cracks growth kinetics in relation with the polycrystalline microstructure, International Journal of Fatigue, vol.27, pp.471-480, 2005. ,
URL : https://hal.archives-ouvertes.fr/hal-01820130
The non-uniform flow of polycrystals by grainboundary sliding accommodated by power-law creep, Acta Metallurgica, vol.23, pp.425-440, 1975. ,
Diffusion-accommodated flow and superplasticity, Acta Metallurgica, vol.21, 1973. ,
On grain boundary sliding and diffusional creep, Metallurgical Transactions, vol.2, issue.4, pp.1113-1127, 1971. ,
GrainBoundary Sliding in AZ31 Magnesium Alloys at Room Temperature to 523 K, Materials Transactions, vol.44, issue.4, pp.445-451, 2003. ,
First Direct In Situ Observation of Grain Boundary Sliding in Ultra fi ne Grained Noble Metal, Advanced Engineering Materials, vol.16, issue.5, pp.517-521, 2014. ,
Estimation of grain boundary sliding during ambienttemperature creep in hexagonal close-packed metals using atomic force microscope, Scanning Probe Microscopy, 2012. ,
Analysis of high-temperature creep deformation in a polycrystalline nickelbase superalloy, Materials Science & Engineering A, vol.511, pp.301-306, 2009. ,
URL : https://hal.archives-ouvertes.fr/hal-00446944
An investigation of grain boundary sliding during creep, Journal of Materials Science, vol.2, 1967. ,
The dependence of grain boundary sliding on shear stress, Journal of Materials Science, vol.3, pp.306-313, 1968. ,
The contribution of grain boundary sliding to the overall strain of a polycrystal, Transactions of the metallurgical society of aime, vol.239, 1967. ,
Investigation of grain boundary sliding during superplastic deformation of a fine-grained alumina by atomic force microscopy, Ceramics International, vol.25, pp.389-394, 1999. ,
Quantitative Measurements of Grain Boundary Sliding in an Ultrafine-Grained Al Alloy by Atomic Force Microscopy, Metallurgical and Materials Transactions A, vol.42, pp.3969-3978, 2011. ,
Tensile behavior and deformation mechanisms of ultrafine-grained aluminum processed using equal-channel angular pressing, Materials Science and Engineering A, vol.606, pp.313-321, 2014. ,
High-strain-rate superplasticity in bulk cryomilled ultra-fine-grained 5083 Al, Metallurgical and Materials Transactions A, vol.37, issue.9, pp.2715-2725, 2006. ,
Transition from plastic shear into rotation deformation mode in nanocrystalline metals and ceramics, Reviews on Advanced Materials Science, vol.19, pp.103-113, 2009. ,
Variation of the deformation mechanisms in a nanocrystalline Pd -10 at .% Au alloy at room and cryogenic temperatures, International Journal of Plasticity, vol.60, pp.40-57, 2014. ,
Grain rotations in ultra fi ne-grained aluminum fi lms studied using in situ TEM straining with automated crystal orientation mapping, Materials and design, vol.113, pp.186-194, 2017. ,
, situ Investigations of deformation in nanocrystalline Fe73.5Cu1Nb3Si13.5B9 alloy, vol.92, pp.421-425, 2001.
In situ studies of deformation and fracture in nanophase materials, Nanostructured Materials, vol.2, issue.3, pp.267-276, 1993. ,
Quantitative grain growth and rotation probed by in-situ TEM straining and orientation mapping in small grained Al thin films, Scripta Materialia, vol.99, pp.5-8, 2015. ,
URL : https://hal.archives-ouvertes.fr/hal-01729245
Tensile deformation of an ultrafine-grained aluminium alloy : Micro shear banding and grain boundary sliding, Acta Materialia, vol.56, pp.2223-2230, 2008. ,
Strain Mapping of Al -Mg Alloy with Multi-scale Grain Structure using Digital Image Correlation Method, Experimental Mechanics, vol.50, pp.117-123, 2010. ,
The effect of microstructure heterogeneity on the microscale deformation of ultrafine-grained aluminum, Journal of Materials Research, vol.29, 2014. ,
Dynamic Micro-strain Analysis of Ultrafine-grained Aluminum Magnesium alloy using Digital Image Correlation, Metallurgical and Materials Transactions A, vol.44, issue.6, pp.1-23, 2013. ,
The microstructure length scale of strain rate sensitivity in ultrafine-grained aluminum, Journal of Materials Research, vol.30, issue.7, pp.981-992, 2015. ,
Effects of annealing temperature on the mechanical properties and sensitization of 5083-H116 aluminum alloy, Journal of Materials Design and Applications, vol.229, issue.4, pp.339-346, 2015. ,
Analysis of Structure and Mechanical Properties of Aa 5083 Aluminium Alloy Processed By Ecae, Reviews on Advanced Materials Science, vol.10, pp.473-478, 2005. ,
Structural and mechanical properties in AA 5083 processed by ECAE, Materials Science and Technology, vol.16, issue.11-12, pp.1256-1258, 2000. ,
Synthesis and mechanical behavior of nanostructured materials via cryomilling, Progress in Materials Science, vol.51, issue.1, pp.1-60, 2006. ,
Thermal stability of ultrafine-grained aluminum in the presence of Mg and Zr additions, Materials Science & Engineering A, vol.265, pp.188-196, 1999. ,
Hall-Petch relationship in friction stir welds of equal channel angular-pressed aluminium alloys, Materials Science and Engineering A, vol.354, pp.298-305, 2003. ,
Strengthening mechanisms in an Al-Mg alloy, Materials Science and Engineering A, vol.527, issue.6, pp.1292-1298, 2010. ,
Influence of grain size on tensile properties of AlMg alloys, Materials Science and Technology, vol.19, issue.10, pp.1349-1354, 2003. ,
Microstructure and high temperature deformation of an ECAE processed 5083 Al alloy, Materials Science Forum, pp.437-442, 2001. ,
Spatiotemporal aspects of jerky flow in Al-Mg alloys, in relation with the Mg content, Scripta Materialia, vol.54, issue.12, pp.2113-2118, 2006. ,
URL : https://hal.archives-ouvertes.fr/hal-00119271
Three types of Portevin -Le Chatelier effects : Experiment and modelling, Acta Materialia, vol.55, pp.2219-2228, 2007. ,
Effect of deformation geometry on the intermittent plastic flow associated with the Portevin -Le Chatelier effect, Acta Materialia, vol.56, issue.19, pp.5565-5572, 2008. ,
Crossover from continuous to discontinuous propagation in the Portevin-Le Chatelier effect, Acta Materialia, vol.58, issue.4, pp.1342-1349, 2010. ,
Effect of short-term annealing on the microstructures and fl ow properties of an Al -1 % Mg alloy processed by high-pressure torsion, Materials Science & Engineering A, vol.615, pp.231-239, 2014. ,
Effect of equal channel angular pressing on the Portevin -Le Chatelier effect in an Al3Mg alloy, Materials Science & Engineering A, vol.615, pp.7-13, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01503719
Mechanical behaviour of dilute Al -Mg alloy processed by equal channel angular pressing, Scripta Materialia, vol.48, pp.213-218, 2003. ,
Effect of Grain Refinement on Jerky Flow in an Al-Mg-Sc Alloy, Metallurgical and Materials Transactions A, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01515202
Serration behavior and shear band characteristics during tensile deformation of an ultrafine-grained 5024 Al alloy Materials Science & Engineering A Serration behavior and shear band characteristics during tensile deformation of an ultra fi ne-grained 5024 Al alloy, Materials Science & Engineering A, vol.616, pp.189-195, 2014. ,
On the Occurrence of Portevin -Le Châtelier Instabilities in Ultrafine-Grained 5083 Aluminum Alloys, pp.207-218, 2009. ,
Fabrication and Characterization of Supersaturated Al-Mg Alloys by Severe Plastic Deformation and Their Mechanical Properties, Materials Transactions, vol.50, issue.1, pp.76-81, 2009. ,
Deformation and reconstruction mechanisms in coarse-grained superplastic Al -Mg alloys, Acta Materialia, vol.54, pp.3827-3833, 2006. ,
Grain refinement and superplasticity in 5083 Al, Materials Science & Engineering A, vol.191, pp.143-150, 1995. ,
Superplastic deformation behavior of ultra-fine-grained 5083 Al alloy using load-relaxation tests, Materials Science and Engineering A, pp.756-760, 2007. ,
Creep behavior in near-nanostructured Al 5083 alloy, Materials Science and Engineering A, pp.24-27, 2005. ,
Low-Cycle Fatigue of Ultra-FineGrained Cryomilled 5083 Aluminum Alloy, Metallurgical and Materials Transactions A, vol.40, 2009. ,
High cycle fatigue behaviour of Ultrafine grained Al 5083 alloy, Materials Science and Technology, vol.000, 2014. ,
Identification of Dispersoids in AI-Mg Alloys Containing Mn, Metallurgical Transactions A, vol.18, pp.1353-1357, 1987. ,
Transmission electron microscopic investigations of grain boundary beta phase precipitation in Al 5083 aged at 373 K (100 C), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol.44, issue.3, pp.1279-1289, 2013. ,
Microstructure evolution of a modified AA5083 aluminum alloy during a multistage homogenization treatment, Materials Characterization, vol.65, pp.16-27, 2012. ,
Écrouissage d'alliages d'aluminium, 1999. ,
Preferred orientation in extruded aluminum alloy rod, Scripta metallurgica, vol.17, pp.339-342, 1983. ,
Mechanical behavior of an aluminium alloy subjected to severe plastic deformation, 2000. ,
Heterogeneity of deformation texture in equal channel angular extrusion of copper, Acta Materialia, vol.52, issue.16, pp.4859-4875, 2004. ,
Microtexture and microstructure evolution during processing of pure aluminum by repetitive ECAP, Materials Science and Engineering A, vol.429, pp.137-148, 2006. ,
Effect of deformation geometry on the intermittent plastic flow associated with the Portevin -Le Chatelier effect, Acta Materialia, vol.56, issue.19, pp.5565-5572, 2008. ,
Atomicscale analysis of the segregation and precipitation mechanisms in a severely deformed Al-Mg alloy, Acta Materialia, vol.72, pp.125-136, 2014. ,
Developement in the use of ECAP processing for grain refinement, Reviews on Advanced Materials Science, vol.13, pp.15-26, 2006. ,
Influence of the extreme grain size reduction on plastic deformation instability in an AlMg and AlMgScZr alloys, 2018. ,
URL : https://hal.archives-ouvertes.fr/tel-02141620
Effect of equal channel angular pressing on the Portevin -Le Chatelier effect in an Al3Mg alloy, Materials Science & Engineering A, vol.615, pp.7-13, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01503719
Room Temperature Dynamic Strain Aging in Ultrafine-Grained Titanium, Metallurgical and Materials Transactions A, vol.46, issue.10, pp.4468-4477, 2015. ,
Deformation behavior of an ultrafine-grained Al-Mg alloy produced by equal-channel angular pressing, Acta Materialia, vol.55, issue.16, pp.5408-5418, 2007. ,
Crossover from continuous to discontinuous propagation in the Portevin-Le Chatelier effect, Acta Materialia, vol.58, issue.4, pp.1342-1349, 2010. ,
Stress Relaxation and Mechanical Behavior of Metals, Metallurgical Transactions, vol.2, pp.1245-1248, 1971. ,
Development of equations for strain rate sensitivity of UFG aluminum as a function of strain rate, International Journal of Plasticity, vol.90, pp.167-176, 2017. ,
Activation volume and deviation from Cottrell-Stokes law at small grain size, International Journal of Plasticity, vol.26, issue.5, pp.747-757, 2010. ,
URL : https://hal.archives-ouvertes.fr/hal-00528025
Superplastic deformation behavior of ultra-fine-grained 5083 Al alloy using load-relaxation tests, Materials Science and Engineering A, pp.756-760, 2007. ,
The effect of strain rate on the deformation mechanisms and the strain rate sensitivity of an ultra-finegrained Al alloy, Scripta Materialia, vol.61, issue.2, pp.181-184, 2009. ,
A generalised criterion of plastic instabilities and its application to creep damage and superplastic flow, Acta Metallurgica, vol.43, issue.11, pp.4093-4100, 1995. ,
Diffusion-accommodated flow and superplasticity, Acta Metallurgica, vol.21, 1973. ,
Creep and microstructure in ultrafine-grained 5083 Al, Journal of Materials Science, vol.48, pp.3294-3303, 2013. ,
Deformation behavior of a modified 5083 aluminum alloy, Materials Science & Engineering A, vol.392, pp.373-379, 2005. ,
High-temperature deformation of 6061 Al, Acta Metallurgica, vol.42, issue.3, 1994. ,
Fabrication of micro-scale speckle pattern and its applications for deformation measurement, Measurement Science and Technology, vol.23, 2012. ,
Development of patterns for nanoscale strain measurements : I. Fabrication of imprinted Au webs for polymeric, Nanotechnology, vol.15, 2004. ,
Development of a pattern to measure multiscale deformation and strain distribution via in situ FE-SEM, Nanotechnology, vol.22, 2011. ,
Dynamic Micro-strain Analysis of Ultrafine-grained Aluminum Magnesium alloy using Digital Image Correlation, Metallurgical and Materials Transactions A, vol.44, issue.6, pp.1-23, 2013. ,
Vapor-Assisted Remodeling of Thin Gold Films, Chemistry of Materials, vol.17, issue.20, pp.5014-5023, 2005. ,
Development of Patterns for Digital Image Correlation Measurements at Reduced Length Scales, Experimental Mechanics, vol.47, pp.63-77, 2007. ,
Plastic Strain Mapping with Sub-micron Resolution Using Digital Image Correlation, Experimental Mechanics, vol.53, pp.743-754, 2013. ,
Small-scale patterning methods for digital image correlation under scanning electron microscopy, Measurement Science and Technology, vol.22, 2011. ,
Multiscale experimental investigation of crystal plasticity and grain boundary sliding in synthetic halite using digital image correlation, Journal of Geophysical Research: Solid Earth, vol.118, issue.2, pp.511-526, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-00866959
Solid-State Dewetting of Thin Films, Annual Review of Materials Research, vol.42, 2012. ,
Assessment of digital image correlation measurement errors: Methodology and results, Experimental Mechanics, vol.49, issue.3, pp.353-370, 2009. ,
URL : https://hal.archives-ouvertes.fr/hal-00881043
Microextensométrie locale par corrélation d ' images numériques. Application aux études micromécaniques par microscopie électronique à balayage, 2000. ,
Rotational diffusion and grain size dependent shear instability in nanostructured materials, Acta Materialia, vol.56, pp.282-291, 2008. ,
Quantitative Measurements of Grain Boundary Sliding in an Ultrafine-Grained Al Alloy by Atomic Force Microscopy, Metallurgical and Materials Transactions A, vol.42, pp.3969-3978, 2011. ,
Experimental validation of two-dimensional finite element method for simulating constitutive response of polycrystals during high temperature plastic deformation, Journal of Materials Engineering and Performance, vol.16, pp.170-178, 2007. ,
Tensile behavior and deformation mechanisms of ultrafine-grained aluminum processed using equal-channel angular pressing, Materials Science and Engineering A, vol.606, pp.313-321, 2014. ,
The microstructure length scale of strain rate sensitivity in ultrafine-grained aluminum, Journal of Materials Research, vol.30, issue.7, pp.981-992, 2015. ,
Fatigue Crack Growth in UltrafineGrained Copper Obtained by ECAP, Advanced Materials Research, pp.1099-1104, 2014. ,
On the fatigue crack growth-microstructure relationship in ultrafine-grained interstitialfree steel, Journal of Materials Science, vol.45, issue.17, pp.4813-4821, 2010. ,
Glissement {110}<110> dans les metaux de structure cubique a faces centrees, Acta Metallurgica, vol.21, 1973. ,
Glide of dislocations in non-octahedral planes of fcc metals: A review, International Journal of Materials Research, vol.100, pp.1403-1410, 2009. ,
Effect of Mg content on the minimum grain size of Al-Mg alloys obtained by friction stir processing, Scripta Materialia, vol.64, pp.355-358, 2011. ,
On grain boundary sliding and diffusional creep, Metallurgical Transactions, vol.2, issue.4, pp.1113-1127, 1971. ,
Diffusion-accommodated flow and superplasticity, Acta Metallurgica, vol.21, 1973. ,
The non-uniform flow of polycrystals by grainboundary sliding accommodated by power-law creep, Acta Metallurgica, vol.23, pp.425-440, 1975. ,
Effect of grain boundary sliding on creep constrained diffusive cavitation, Journal of the Mechanics and Physics of Solids, vol.33, issue.5, pp.447-469, 1985. ,
Mechanical models of the effect of grain boundary sliding on creep and creep rupture, Rev. Phys. Appl. Rev. Phys. Appl, vol.23, pp.595-604, 1988. ,
URL : https://hal.archives-ouvertes.fr/jpa-00245807
Effects of grain boundary sliding on creep-constrained boundary cavitation and creep deformation, Mechanics of Materials, vol.11, issue.1, pp.43-62, 1991. ,
Influence of microstructural variations of steady state creep and facet stresses in 2-D Freely sliding polycrytals, International Journal of Solids and Structures, vol.34, issue.6, pp.703-726, 1997. ,
A two-dimensional finite element method for simulating the constitutive response and microstructure of polycrystals during high temperature plastic deformation, Journal of the Mechanics and Physics of Solids, vol.52, issue.6, pp.1289-1317, 2004. ,
Experimental validation of two-dimensional finite element method for simulating constitutive response of polycrystals during high temperature plastic deformation, Journal of Materials Engineering and Performance, vol.16, pp.170-178, 2007. ,
The influence of a threshold stress for grain boundary sliding on constitutive response of polycrystalline Al during high temperature deformation, Materials Science and Engineering A, vol.494, pp.86-91, 2008. ,
The effect of stress state on high-temperature deformation of fine-grained aluminum -magnesium alloy AA5083 sheet, Acta Materialia, vol.57, pp.2812-2822, 2009. ,
Activation volume and deviation from Cottrell-Stokes law at small grain size, International Journal of Plasticity, vol.26, issue.5, pp.747-757, 2010. ,
URL : https://hal.archives-ouvertes.fr/hal-00528025
Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials, Scripta Materialia, vol.63, issue.5, pp.477-479, 2010. ,
URL : https://hal.archives-ouvertes.fr/hal-00509787
Mechanisms of grain boundary softening and strain-rate sensitivity in deformation of ultrafine-grained metals at high temperatures, Acta Materialia, vol.59, issue.11, pp.4323-4334, 2011. ,
Coupled grain boundary motion in aluminium : the effect of structural multiplicity, pp.1-11, 2016. ,
Slip-induced intergranular stress redistribution in nanocrystalline Ni, Acta Materialia, vol.60, issue.20, pp.7001-7010, 2012. ,
Grain size, grain boundary sliding, and grain boundary interaction effects on nanocrystalline behavior, Materials Science and Engineering A, vol.520, issue.1-2, pp.121-133, 2009. ,
Molecular dynamics simulations of grain boundary sliding: The effect of stress and boundary misorientation, Acta Materialia, vol.55, issue.5, pp.1555-1563, 2007. ,
The effect of solute atoms on aluminum grain boundary sliding at elevated temperature, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol.42, issue.3, pp.651-659, 2011. ,
Atomistic based continuum investigation of plastic deformation in nanocrystalline copper, International Journal of Plasticity, vol.22, issue.4, pp.754-774, 2006. ,
A generalized self-consistent polycrystal model for the yield strength of nanocrystalline materials, Journal of the Mechanics and Physics of Solids, vol.52, issue.5, pp.1125-1149, 2004. ,
Mechanical properties and multi-scale modeling of nanocrystalline materials, Acta Materialia, vol.55, issue.10, pp.3563-3572, 2007. ,
Self-consistent scale transition with imperfect interfaces: Application to nanocrystalline materials, Acta Materialia, vol.56, issue.7, pp.1546-1554, 2008. ,
A bimodal bulk ultra-fine-grained nickel: Experimental and micromechanical investigations, Mechanics of Materials, vol.42, issue.5, pp.522-536, 2010. ,
Simulation of inter-and transgranular crack propagation in polycrystalline aggregates due to stress corrosion cracking, Acta Materialia, vol.57, issue.13, pp.3840-3855, 2009. ,
URL : https://hal.archives-ouvertes.fr/hal-00413658
Grain-boundary sliding and separation in polycrystalline metals: Application to nanocrystalline fcc metals, Journal of the Mechanics and Physics of Solids, vol.52, issue.11, pp.2587-2616, 2004. ,
A meshless grain element for micromechanical analysis with crystal plasticity, International Journal for Numerical Methods in Engineering, vol.67, issue.1, pp.17-65, 2006. ,
A three-dimensional cohesive-frictional grainboundary micromechanical model for intergranular degradation and failure in polycrystalline materials, Computer Methods in Applied Mechanics and Engineering, vol.265, pp.36-62, 2013. ,
A grain boundary formulation for crystal plasticity, International Journal of Plasticity, vol.83, pp.202-224, 2016. ,
Modeling grain boundaries in polycrystals using cohesive elements: Qualitative and quantitative analysis, Nuclear Engineering and Design, vol.261, pp.371-381, 2013. ,
Numerical Homogenization of Elastic Behavior of Fractured Rock Masses and Micro-cracked Materials by FEM, The 12th international conference of IACMAG, pp.1-6, 2008. ,
Bridging time-scales: Grain boundary sliding constitutive law from atomistics, Computational Materials Science, vol.104, pp.200-204, 2015. ,
Atomicscale analysis of the segregation and precipitation mechanisms in a severely deformed Al-Mg alloy, Acta Materialia, vol.72, pp.125-136, 2014. ,
Deformation behavior of an ultrafine-grained Al-Mg alloy produced by equal-channel angular pressing, Acta Materialia, vol.55, issue.16, pp.5408-5418, 2007. ,
Superplastic deformation behavior of ultra-fine-grained 5083 Al alloy using load-relaxation tests, Materials Science and Engineering A, pp.756-760, 2007. ,
Mechanics of solid materials, 1994. ,
Dislocation dynamics during plastic deformation, Springer series in Materials Science, vol.129, 2010. ,
Dislocation arrangements during cyclic hardening and softening in Al crystals, Acta metallurgica, vol.11, 1963. ,
Ultrafine versus coarse grained al 5083 alloys: From low-cycle to very-high-cycle fatigue, International Journal of Fatigue, vol.121, pp.84-97, 2019. ,
URL : https://hal.archives-ouvertes.fr/hal-01969200
A comprehensive evaluation of parameters governing the cyclic stability of ultrafine-grained fcc alloys, Materials Science and Engineering: A, vol.528, issue.21, pp.6345-6355, 2011. ,
Atomic force microscopic study on surface morphology of ultra-fine grained materials after tensile testing, vol.321, pp.862-866, 2001. ,
Cyclic behavior and microstructural stability of ultrafine-grained aa6060 under strain-controlled fatigue, Procedia Engineering, vol.2, issue.1, pp.2199-2208, 2010. ,
Influence of the ecap processing parameters on the cyclic deformation behavior on ultrafine-grained cubic face centered metals, Advanced Engineering Materials, vol.14, 2012. ,
Low-Cycle Fatigue of Ultra-FineGrained Cryomilled 5083 Aluminum Alloy, Metallurgical and Materials Transactions A, vol.40, 2009. ,
Fatigue properties and crack behavior of ultra-fine and nanocrystalline pure metals, International Journal of Fatigue, vol.31, pp.1476-1489, 2009. ,
On the fatigue crack growth-microstructure relationship in ultrafine-grained interstitialfree steel, Journal of Materials Science, vol.45, issue.17, pp.4813-4821, 2010. ,
Fatigue Crack Growth in UltrafineGrained Copper Obtained by ECAP, Advanced Materials Research, pp.1099-1104, 2014. ,