G. A. Adam and D. Zimmer, Design for additive manufacturing -element transitions and aggregated structures, CIRP Journal of Manufacturing Science and Technology, vol.7, issue.4, pp.20-28, 2014.

P. R. Adhikari and R. Mirshams, Study of knowledge-based system (KBS) and decisionmaking methodologies in materials selection for lightweight aircraft metallic structures, Journal of Applied Science, Engineering and Technology, vol.5, issue.1, pp.1-19, 2017.

. Adriyendi, Multi-attribute decision making using simple additive weighting and weighted product in food choice, International Journal of Information Engineering and Electronic Business, vol.6, pp.8-14, 2015.

B. Ahuja, M. Karg, and M. Schmidt, Additive manufacturing in production: challenges and opportunities, SPIE LASE, International Society for Optics and Photonics, 2015.

J. C. Albinana and C. Vila, A framework for concurrent material and process selection during conceptual product design stages, Materials and Design, vol.41, pp.433-446, 2012.

V. Alfieri, P. Argenio, F. Caiazzo, and V. Sergi, Reduction of surface roughness by means of laser processing over additive manufacturing metal parts, Materials, 2017.

F. Ali, B. V. Chowdary, and J. Maharaj, Influence of some process parameters on build time, material consumption, and surface roughness of FDM processed parts: inferences based on the Taguchi design of experiments, Proceedings of the 2014 IAJC/ISAM Joint International Conference, pp.978-979, 2014.

J. Allen, An investigation into the comparative costs of additive manufacture vs. machine from solid for aero engine parts, Cost Effective Manufacture via Net-Shape Processing, Meeting Proceedings RTO-MP-AVT-139, pp.17-18, 2006.

R. Anitha, S. Arunachalam, and P. Radhakrishnan, Critical parameters influencing the quality of prototypes in fused deposition modelling, Journal of Materials Processing Technology, vol.118, pp.385-388, 2001.

A. Armillotta, Selection of layered manufacturing techniques by an adaptive AHP decision model, Journal of Robotics and Computer-Integrated Manufacturing, vol.24, pp.450-461, 2007.

M. F. Ashby, Multi-objective optimization in material design and selection, Journal of Acta Materialia, vol.48, pp.359-369, 1999.

M. F. Ashby, Materials selection in mechanical design, 3 rd edn. Butterworth-Heinemann Linacre House, pp.0-7506, 2005.

M. F. Ashby, Material and process selection charts. The CES EduPack Resource Booklet 2, © Granta Design, 2010.

M. F. Ashby, D. Cebon, and A. Silva, Teaching engineering materials: CES EduPack. Granta Teaching Resources, © Granta Design, 2012.

A. , Standard terminology for additive manufacturing technologies. Standard F2792-12a, 2012.

A. , Standard test method for compressive properties of rigid plastics, 2015.

A. Armillotta, Assessment of surface quality on textured FDM prototypes, Rapid Prototyping Journal, vol.12, issue.1, pp.35-41, 2006.

E. Atzeni, L. Luliano, P. Minetola, and A. Salmi, Redesign and cost estimation of rapid manufactured plastic parts, Rapid Prototyping Journal, vol.16, issue.5, pp.308-317, 2010.

E. Atzeni and A. Salmi, Economics of additive manufacturing for end-usable metal parts, International Journal of Advanced Manufacturing Technology, vol.62, pp.1147-1155, 2012.

S. Balaji and M. S. Murugaiyan, Waterfall vs V-Model vs Agile: a comparative study on SDLC, International Journal of Information Technology and Business Management, vol.2, issue.1, pp.26-30, 2012.

C. Barlier and A. Bernard, Fabrication Additive: Du Pototypage rapide à l'impression 3D. Dunod, 2016.

M. Baumers, C. Tuck, R. Wildman, I. Ashcroft, E. Rosamond et al., Transparency built-in, Journal of Industrial Ecology, vol.17, issue.3, pp.418-431, 2013.

C. Bellehumeur, L. Li, Q. Sun, and P. Gu, Modeling of bond formation between polymer filaments in the fused deposition modeling process, Journal of Manufacturing Processes, vol.6, issue.2, pp.170-178, 2004.

M. P. Bendsoe and N. Kikuchi, Generating optimal topologies in structural design using a homogenization method, Journal of Computer Methods in Applied Mechanics and Engineering, vol.71, issue.2, pp.197-224, 1988.

M. P. Bendsoe, A. Ben-tal, and J. Zowe, Optimization methods for truss geometry and References 127 topology design, Journal of Structural Optimization, vol.7, issue.3, pp.141-159, 1994.

R. Berger, . Strategy, and . Consultants, Additive manufacturing -a game changer for the manufacturing industry, 2013.

A. F. Berman, G. S. Maltugueva, and A. Y. Yurin, Application of case-based reasoning and multi-criteria decision-making methods for material selection in petrochemistry, Journal of Materials, Design and Applications, vol.0, issue.0, pp.1-9, 2015.

A. Bernard, A. Deglin, and G. Ris, An original approach for the memorisation and the generation of rapid product development processes, Rapid Prototyping Journal, vol.9, issue.2, pp.58-67, 2003.

A. Bernard, N. Perry, J. C. Delplace, and S. Gabriel, Quotation for the value-added assessment during product development and production processes. Proceeding of the, CIRP Design Seminar, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00540011

L. Bechthold, V. Fischer, A. Hainzlmaier, D. Hugenroth, L. Ivanova et al., 3D printing: a qualitative assessment of applications, recent trends and the technology's future potential, p.17, 2015.

K. Boivie, K. Sorby, V. Brotan, and P. Ystgaard, Development of a hybrid manufacturing cell; integration of additive manufacturing with CNC machining. In 22nd annual international solid freeform fabrication symposium-an additive manufacturing conference, pp.153-163, 2011.

H. D. Budiono, G. Kiswanto, and T. P. Soemardi, Method and model development for manufacturing cost estimation during the early design phase related to the complexity of the machining processes, International Journal of Technology, vol.2, pp.183-192, 2014.

H. S. Byun and K. H. Lee, A decision support system for the selection of a rapid prototyping process using the modified TOPSIS method, International Journal of Advanced Manufacturing Technology, vol.26, pp.1338-1347, 2005.

R. I. Campbell and M. R. Bernie, Creating a database of rapid prototyping system capabilities, Journal of Materials Processing Technology, pp.163-167, 1996.

I. Campbell, D. Bourell, and I. Gibson, Additive manufacturing: rapid prototyping comes of age, Rapid Prototyping Journal, vol.18, issue.4, pp.255-258, 2012.

M. Caramia and P. Dell'olmo, Multi-objective management in freight logistics: increasing capacity, service level and safety with optimization algorithm, pp.978-979, 2008.

J. Cerneels, A. Voet, J. Ivens, and J. P. Kruth, Additive manufacturing of thermoplastic composites, Composites week @ Leuven and TexComp-11 Conference, 2013.

M. Chhabra and R. Singh, Obtaining desired surface roughness of castings produced using ZCast direct metal casting process through Taguchi's experimental approach, Rapid Prototyping Journal, vol.18, pp.458-471, 2012.

N. D. Chakladar and S. Chakraborty, A combined TOPSIS-AHP-Method-Based approach for non-traditional machining processes selection, Journal of Engineering Manufacture, vol.222, pp.1613-1623, 2008.

R. W. Chen, D. Navin-chandra, I. Nair, F. Prinz, and I. L. Wadehra, ImSelection -An approach for material selection that integrates mechanical design and lifecycle environment burdens, IEEE International Symposium on Electronics and the Environment, pp.68-74, 1995.

Y. Chen, 3D texture mapping for rapid manufacturing, Computer Aided Design & Applications, vol.4, issue.6, pp.761-771, 2007.

Z. Chen, L. Gao, H. Qiu, and X. Shao, Combining genetic algorithms with optimality criteria method for topology optimization, Proceedings of Bio-Inspired Computing, BICTA'09, pp.1-6, 2009.

K. Chockalingam, N. Jawahar, K. N. Ramanathan, and P. S. Banarjee, Optimization of stereolithography process parameters for part strength using design of experiments, International Journal of Advanced Manufacturing Technology, vol.29, pp.79-88, 2006.

K. Chockalingam, N. Jawahar, U. Chandrasekar, and K. N. Ramanathan, Establishment of process model for part strength in stereolithography, Journal of Materials Processing Technology, 2008.

C. W. Chung, J. Hong, A. Lee, K. Ramani, and M. Tomovic, Methodology for selection of rapid tooling process for manufacturing applications, ASME 2003 International Mechanical Engineering Congress and Exposition, pp.23-30, 2003.

M. Cotteleer, J. Holdowsky, and M. Mahto, The 3D opportunity primer: the basics of additive manufacturing. A Deloitte Series on Additive Manufacturing, 2013.

C. Cozmei and F. Caloian, Additive manufacturing flickering at the beginning of existence, Procedia Economics and Finance, vol.3, pp.457-462, 2012.

G. D'antonio, F. Segonds, J. S. Bedolla, P. Chiabert, and N. Anwer, A proposal of manufacturing execution system integration in design for additive manufacturing, Product Lifecycle Management in the Era of Internet of Things: IFIP Advances in Information and Communication Technology, vol.467, pp.761-770, 2016.

S. Das, M. Wohlert, J. J. Beaman, and D. L. Bourell, Processing of titanium net shapes by SLS, HIP. Materials and Design, vol.20, pp.115-121, 1999.

. Deloitte, Industry 4.0: Challenges and solutions for the digital transformation and use of exponential technologies, The Creative Studio of Deloitte, 2015.

Y. M. Deng and K. L. Edwards, The role of materials identification and selection in engineering design, Journal of Materials and Design, vol.28, pp.131-139, 2007.

S. Desai, B. Bidanda, and M. R. Lovell, Material and process selection in product design using decision making technique (AHP), European Journal of Industrial Engineering, vol.6, issue.3, pp.322-346, 2012.

D. J. Dippenaar and K. Schreve, 3D printing tooling for vacuum-assisted resin transfer moulding, International Journal of Advanced Manufacturing Technology, 2012.

M. Djassemi, Computer-based approach to material and process selection, Journal of Manufacturing Technology Management, vol.20, issue.7, pp.975-988, 2009.

G. Dong, G. Wijaya, Y. Tang, and Y. F. Zhao, Optimizing process parameters of fused deposition modeling by Taguchi method for the fabrication of lattice structures, Journal of Additive Manufacturing, vol.19, pp.62-72, 2018.

W. S. Dorn, R. E. Gomory, and H. J. Greenberg, Automatic Design of Optimal Structures, Journal de Mecanique, vol.3, issue.1, pp.25-52, 1964.

K. Dowsland, W. Dowsland, and J. Bennell, Jostling for position: local improvement for irregular cutting patterns, Journal of the Operational Research Society, pp.647-658, 1998.

F. Dweiri and F. M. Al-oqla, Material selection using analytical hierarchy process, International Journal of Computer Applications in Technology, vol.26, issue.4, pp.182-189, 2006.

J. Egeblad, B. K. Nielsen, and M. Brazil, Translational packing of arbitrary polytopes, Computational Geometry, vol.42, issue.4, pp.269-288, 2009.

A. Emrouznejad and M. Marra, The state of the art development of AHP (1979-2017): a literature review with a social network analysis, International Journal of Production Research, References, vol.130, 2017.

M. M. Farag and E. El-magd, An integrated approach to product design, materials selection and cost estimation, Journal of Material Design, vol.13, pp.323-327, 1992.

M. M. Farag, Quantitative methods of material selection, book: Mechanical Engineers' Handbook: Materials and Mechanical Design, vol.1, pp.466-488, 2002.

M. M. Farag, Materials and process selection for engineering design, pp.978-979, 2014.

O. Fisher, N. Watson, L. Porcu, D. Bacon, M. Rigley et al., Cloud manufacturing as a sustainable process manufacturing route, Journal of Manufacturing Systems, vol.47, pp.53-68, 2018.

L. M. Galantucci, F. Lavecchia, and G. Percoco, Experimental study aiming to enhance the surface finish of fused deposition modeled parts, CIRP Annals -Manufacturing Technology, vol.58, issue.1, pp.189-192, 2009.

M. M. Ghazi, Development of an additive manufacturing decision support system (AMDSS), 2012.

R. E. Giachetti, A decision support system for material and manufacturing process selection, Journal of Intelligent Manufacturing, vol.9, pp.265-276, 1997.

I. Gibson, D. Rosen, and B. Stucker, Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing, pp.978-979, 2015.

B. Gorny, T. Niendorf, J. Lackmann, M. Thoene, T. Troester et al., In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting, Journal of Materials Science and Engineering, vol.528, issue.27, pp.7962-7967, 2011.

J. R. Groza and J. F. Shackelford, Materials processing handbook, 2010.

S. K. Gupta, Y. Chen, S. Feng, and R. Sriram, A system for generating process and material selection advice during embodiment design of mechanical components, Journal of Manufacturing Systems, vol.22, issue.1, pp.28-45, 2003.

S. Gupta, G. S. Dangayach, A. K. Singh, and P. N. Rao, Analytic Hierarchy Process (AHP) model for evaluating sustainable manufacturing practices in Indian electrical panel industries, 2015.

, Procedia -Social and Behavioral Sciences, vol.189, pp.208-216

R. Hague, S. Mansour, and N. Saleh, Design opportunities with rapid manufacturing, Journal of Assembly Automation, vol.23, issue.4, pp.346-356, 2003.

R. Hague, S. Mansour, and N. Saleh, Material and design considerations for rapid manufacturing, International Journal of Production Research, vol.42, issue.22, pp.4691-4708, 2004.

A. Hassan, A. Siadat, J. Y. Dantan, and P. Martin, Conceptual process planning -an improvement approach using QFD, FMEA, and ABC methods, Robotics and ComputerIntegrated Manufacturing, vol.26, issue.4, pp.392-401, 2010.
URL : https://hal.archives-ouvertes.fr/hal-02168374

J. Holmström, M. Holweg, S. H. Khajavi, and J. Partanen, The direct digital manufacturing (r)evolution: definition of a research agenda, Operations Management Research, vol.9, issue.1-2, pp.1-10, 2016.

N. Hopkinson and P. Dickens, Analysis of rapid manufacturing-using layer manufacturing processes for production, Proceedings of the Institution of Mechanical Engineers, vol.217, pp.31-39, 2003.

N. Hopkinson and P. Dickens, Emerging rapid manufacturing processes. In: Rapid Manufacturing-An Industrial Revolution for the Digital Age, pp.55-80, 2006.

T. J. Hsu and W. H. Lai, Manufacturing parts optimization in the three-dimensional printing process by the taguchi method, Journal of the Chinese Institute, vol.33, pp.121-130, 2010.

D. Hu and R. Kovacevic, Sensing, modeling and control for laser-based additive manufacturing, International Journal of Machine Tools & Manufacture, vol.43, pp.51-60, 2003.

S. H. Huang, P. Liu, A. Mokasdar, and L. Hou, Additive manufacturing and its societal impact: a literature review, International Journal of Advanced Manufacturing Technology, vol.67, pp.1191-1203, 2013.

Y. Huang, M. C. Leu, J. Mazumder, and A. Donmez, Additive manufacturing: current state, future potential, gaps and needs, and recommendations, Journal of Manufacturing Science and Engineering, vol.137, pp.14001-14002, 2015.

. Iea, Energy Efficiency Market Report, 2016.

I. Ilyas, C. Taylor, K. Dalgarno, and J. Gosden, Design and manufacture of injection mould tool inserts produced using indirect SLS and machining processes, Rapid Prototyping Journal, vol.16, issue.6, pp.429-440, 2010.

M. Ipek, I. H. Selvi, F. Findik, O. Torkul, and I. H. Cedimoglu, An expert system based References 132 material selection approach to manufacturing, Journal of Materials and Design, vol.47, pp.331-340, 2013.

I. F. Ituarte, E. Coatanea, M. Salmi, J. Tuomi, and J. Partanen, Additive manufacturing in production: a case study applying technical requirements, Physics Procedia, vol.78, pp.357-366, 2015.

A. Jahan, M. Y. Ismail, S. M. Sapuan, and F. Mustapha, Material screening and choosing methods -a review, Journal of Materials and Design, vol.31, pp.696-705, 2010.

A. Jahan, F. Mustapha, and S. M. Sapuan, A framework for weighting of criteria in ranking stage of material selection process, International Journal of Advanced Manufacturing Technology, vol.58, pp.411-420, 2012.

P. K. Jain, P. M. Pandey, and P. V. Rao, Effect of delay time on part strength in selective laser sintering, International Journal of Advanced Manufacturing Technology, 2009.

. Kannan, Design for additive manufacturing, 2013.

O. Kerbrat, P. Mognol, and J. V. Hascoet, A new DFM approach to combine machining and additive manufacturing, Journal of Computers in Industry, vol.62, issue.7, pp.684-692, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00600891

V. I. Kesteren, P. J. Stappers, and J. C. De-bruijn, Materials in product selection: tools for including user-interaction in materials selection, International Journal of Design, vol.1, issue.3, pp.41-55, 2007.

R. S. Khabbaz, B. D. Manshadi, A. Abedian, and R. Mahmudi, A simplified fuzzy logic approach for materials selection in mechanical engineering design, Journal of Materials and Design, vol.30, pp.687-697, 2009.

A. K. Khoda and B. Koc, Functionally heterogeneous porous scaffold design for tissue engineering, CAD Computer Aided Design, vol.45, issue.11, pp.1276-1293, 2013.

N. M. Khorram and F. Nonino, Additive manufacturing management: A review and future research agenda, International Journal of Production Research, vol.55, issue.5, pp.1419-1439, 2017.

N. M. Khorram and F. Nonino, The management of additive manufacturing, Springer Series in Advanced Manufacturing, 2018.

C. Klahn, B. Leutenecker, and M. Meboldt, Design for additive manufacturing -supporting the substitution of components in series products, Procedia CIRP, vol.21, pp.138-143, 2014.

C. Klahn, B. Leutenecker, and M. Meboldt, Design strategies for the process of additive manufacturing, Procedia CIRP, vol.36, pp.230-235, 2015.

J. Kranz, D. Herzog, and C. Emmelmann, Design guidelines for laser additive manufacturing of light-weight structures in TiAl6V4, Journal of Laser Applications, vol.27, pp.14001-14002, 2015.

T. C. Kuo, S. H. Huang, and H. C. Zhang, Design for manufacture and Design for 'X': concepts, applications and perspectives, Journal of Computers and Industrial Engineering, vol.41, pp.241-260, 2001.

P. Kulkarni, A. Marsan, and D. Dutta, A review of process planning techniques in layered manufacturing, Rapid Prototyping Journal, vol.6, issue.1, pp.18-35, 2000.

S. Kumar and R. Singh, An intelligent system for modeling and material selection for progressive die components, Journal of Key Engineering Materials, vol.344, pp.873-880, 2007.

K. S. Lakshmi and G. Arumaikkannu, Influence of process parameters on surface finish in customized bone implant using selective laser sintering, Advanced Materials Research, vol.845, pp.862-867, 2014.

A. Lamikiz, J. A. Sanchez, L. N. Lopez-de-lacalle, and J. L. Arana, Laser polishing of parts built up by selective laser sintering, International Journal of Machine Tools and Manufacture, vol.47, pp.2040-2050, 2007.

H. Lan, Y. Ding, and J. Hong, Decision support system for rapid prototyping process selection through integration of fuzzy synthetic evaluation and an expert system, International Journal of Production Research, vol.43, issue.1, pp.169-194, 2005.

V. T. Le, H. Paris, and G. Mandil, Using additive and subtractive manufacturing technologies in a new re-manufacturing strategy to produce new parts from end-of-life parts, 2015.

B. Lee, J. Abdullah, and Z. Khan, Optimization of rapid prototyping parameters for production of flexible ABS object, Journal of Materials Processing Technology, vol.169, issue.1, pp.54-61, 2005.

K. F. Leong, C. K. Chua, G. S. Chua, and C. H. Tan, Abrasive jet deburring of jewellery models built by Stereolithography apparatus (SLA), Journal of Materials Processing Technology, vol.83, issue.1-3, pp.36-47, 1998.

G. N. Levy, R. Schindel, and J. P. Kruth, Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives, CIRP Annals, Manufacturing Technology, vol.52, issue.2, pp.589-609, 2003.

C. Lindemann, U. Jahnke, M. Moi, and R. Koch, Analyzing product lifecycle costs for a better understanding of cost drivers in additive manufacturing, Annual International References, vol.134, 2012.

, Solid Freeform Fabrication Symposium -An Additive Manufacturing Conference, pp.6-8

. August,

C. Loch and C. Terwiesch, Product development and concurrent engineering, Encyclopedia of Production and Manufacturing Management, vol.16, pp.567-575, 2000.

D. Lukic, M. Milosevic, A. Antic, S. Borojevic, and M. Ficko, Multi-criteria selection of manufacturing processes in the conceptual process planning, Advances in Production Engineering and Management, vol.12, issue.2, pp.151-162, 2017.

M. A. Maleque and S. Dyuti, Materials selection of a bicycle frame using cost per unit property and digital logic methods, International Journal of Mechanical and Materials Engineering, vol.5, issue.1, pp.95-100, 2010.

W. J. Marx, D. N. Mavris, and D. P. Schrage, Integrating design and manufacturing for a high speed civil transport wing, Presented at the 19 th ICAS/AIAA Aircraft Systems Conference, 1994.

S. H. Masood, Intelligent rapid prototyping with fused deposition modeling, Journal of Rapid Prototyping, vol.2, issue.1, pp.24-33, 1996.

C. G. Mancanares, E. S. Zancul, J. C. Silva, and P. A. Miguel, Additive manufacturing process selection based on parts' selection criteria, International Journal of Advanced Manufacturing Technology, 2015.

S. H. Masood and A. Soo, A rule based expert system for rapid prototyping system selection, Robotics and Computer Integrated Manufacturing, vol.18, issue.3, pp.267-274, 2002.

S. Mellor, L. Hao, and D. Zhang, Additive manufacturing: a framework for implementation, International Journal of Production Economics, vol.149, pp.194-201, 2014.

B. Mieritz, O. Jay, B. Holmer, J. Tuomi, L. Vihtonen et al., Norrama -Nordic Network of rapid manufacturing, Nordic Innovation Center, 2008.

A. S. Milani and A. Shanian, A gear material selection with uncertain and incomplete data: material performance indices and decision aid model, International Journal of Mechanics and Materials in Design, vol.3, pp.209-222, 2006.

, Multi-objective optimization and decision making process in engineering design. modeFRONTIER Special Issue, Newsletter EnginSoft, 2008.

O. A. Mohamed, S. H. Masood, and J. L. Bhowmik, Optimization of fused deposition modeling process parameters: a review of current research and future prospects, International Journal of Advanced Manufacturing, 2014.

C. Montgomery, Introduction to statistical quality control, 2001.

M. D. Monzon, Z. Ortega, A. Martinez, and F. Ortega, Standardization in additive manufacturing: activities carried out by international organizations and projects, International Journal of Advanced Manufacturing Technology, vol.76, issue.5-8, pp.1111-1121, 2014.

P. Muller, P. Mognol, and J. Y. Hascoet, Modeling and control of a direct laser powder deposition process for functionally graded materials (FGM) parts manufacturing, Journal of Materials Processing Technology, vol.213, issue.5, pp.685-692, 2013.

J. Munguia, J. De-ciurana, and C. Riba, Pursuing successful rapid manufacturing: a users' best-practices approach, Rapid Prototyping Journal, vol.14, issue.3, pp.173-179, 2008.

S. Nagahanumaiah, K. Ravi, and B. , Computer aided rapid tooling selection and manufacturability evaluation for injection molding development, Computers In Industry, vol.59, issue.2-3, pp.262-276, 2008.

C. D. Naiju, K. Annamalai, S. Karthik, and G. Ramaraj, Fatigue reliability of selective laser sintered (SLS) components using weibull analysis, Applied Mechanics and Materials, vol.232, pp.891-894, 2012.

A. Najafi and M. Rais-rohani, Concurrent process-product design optimization using coupled non-linear finite element simulations. Finite Element Analysis -Applications in Mechanical Engineering, 2012.

S. O. Onuh and K. K. Hon, Optimising build parameters for improved surface finish in stereolithography, International Journal of Machine Tools and Manufacture, vol.38, pp.329-342, 1998.

D. K. Pal and B. Ravi, Rapid tooling route selection and evaluation for sand and investment casting, Virtual and Physical Prototyping Journal, vol.2, issue.4, pp.197-207, 2007.

G. Pahl and W. Beitz, Engineering Design -A Systematic Approach, 1996.

A. Parrot and L. Warshaw, A Deloitte series on Industry 4.0, digital manufacturing enterprises, and digital supply networks, 2017.

G. S. Peace, Taguchi methods, a hands-on approach, 1993.

G. Percoco, F. Lavecchia, and L. M. Galantucci, Compressive properties of FDM rapid prototypes treated with a low cost chemical finishing, Research Journal of Applied Sciences, Engineering and Technology, vol.4, issue.19, pp.3838-3842, 2012.

A. Pilipovic, P. Raos, and M. Sercer, Experimental analysis of properties of materials for rapid prototyping, International Journal of Advanced Manufacturing Technology, vol.40, pp.105-115, 2009.

L. Podshivalov, C. M. Gomes, A. Zocca, J. Guenster, P. Bar-yoseph et al., Design, analysis and additive manufacturing of porous structures for biocompatible microscale scaffolds, Procedia CIRP, vol.5, pp.247-252, 2013.

R. Ponche, O. Kerbrat, P. Mognol, and J. V. Hascoet, Consideration of the manufacturing trajectories in a global design for additive manufacturing methodology, Proceedings of the ASME 2012 11 th Biennial Conference on Engineering Systems Design and Analysis, pp.745-754, 2012.

R. Ponche, O. Kerbrat, P. Mognol, and J. V. Hascoet, A novel methodology of design for additive manufacturing applied to additive laser manufacturing process. Robotics and Computer-Integrated Manufacturing, vol.30, pp.389-398, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01010106

K. K. Prasad, S. V. Mohan, R. S. Rao, B. R. Pati, and P. N. Sarma, Laccase production by Pleurotus ostreatus 1804: optimization of submerged culture conditions by Taguchi DOE methodology, Biochemical Engineering Journal, vol.24, pp.17-26, 2005.

W. Quan and H. Jianmin, A study on collaborative mechanism for product design in distributed concurrent engineering, 2006.

S. Rahmati, J. Akbari, and E. Barati, Dimensional accuracy analysis of wax patterns created by RTV silicone rubber molding using the Taguchi approach, Rapid Prototyping Journal, vol.13, issue.2, pp.115-122, 2007.

S. Z. Ramadan, Binary programming for manufacturing material and manufacturing process selection using Genetic Algorithms, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol.10, pp.243-246, 2016.

S. Rangisetty, The effect of infill patterns and annealing on mechanical properties of additively manufactured thermoplastic composites, Proceedings of the ASME 2017 conference on smart materials, adaptive structures and intelligent systems, 2017.

R. Ranjan, R. Samant, and S. Anand, Design for manufacturability in additive manufacturing using graph based approach, Proceedings of ASME 2015 International Manufacturing Science and Engineering Conference, pp.1-02, 2015.

R. V. Rao, Decision making in the manufacturing environment using graph theory and fuzzy multiple attribute decision making methods, Springer Series in Advanced Manufacturing, 2013.

R. V. Rao and J. P. Davim, A decision-making framework model for material selection using a combined multiple attribute decision making method, International Journal of Advanced Manufacturing Technology, vol.35, pp.751-760, 2008.

L. Ren, L. Zhang, F. Tao, C. Zhao, X. Chai et al., Cloud manufacturing: from concept to practice, Enterprise Information Systems, vol.9, issue.2, pp.186-209, 2015.

D. W. Rosen, Computer-aided design for additive manufacturing of cellular structures, Computer Aided Design and Applications, vol.4, issue.5, pp.585-594, 2007.

L. Roucoules and A. Skander, Manufacturing process selection and integration in product design: analysis and synthesis approaches. Proceeding of the, CIRP Design Seminar, 2003.

R. K. Roy, Design of experiments using the Taguchi approach, pp.0-471, 2001.

R. K. Roy, A primer on the Taguchi method. Society of Manufacturing Engineers, 2010.

W. Royce, Managing the development of large software systems, Proceedings of IEEE WESCON, vol.26, pp.1-9, 1970.

G. I. Rozvany, M. Zhou, and T. Birker, Generalized shape optimization without homogenization, Journal of Structural and Multi-Disciplinary Optimization, vol.4, pp.250-254, 1992.

M. Ruffo, C. Tuck, and R. Hague, Cost estimation for rapid manufacturing -laser sintering production for low to medium volumes, Journal of Engineering Manufacture, vol.220, pp.1417-1427, 2006.

T. L. Saaty, Decision making with analytical hierarchy process, International Journal of Services Sciences, vol.1, pp.83-98, 2008.

N. Sakundarini, Z. Taha, S. H. Rashid, and R. A. Ghazilla, Multi-objective optimization for high recyclability material selection using genetic algorithm, International Journal of References, vol.138, 2013.

, Advanced Manufacturing Technology, vol.68, pp.1441-1451

C. C. Seepersad, T. Govett, K. Kim, M. Lundin, and D. Pinero, A designer's guide for dimensioning and tolerancing SLS Parts. 23rd Annual International Solid Freeform Fabrication Symposium -An Additive Manufacturing Conference, pp.921-931, 2012.

A. Shanian and O. Savadogo, A non-compensatory compromised solution for material selection of bipolar plates for Polymer Electrolyte Membrane Fuel Cell (PEMFC) using ELECTRE IV, Journal of Electrochimica Acta, vol.56, pp.5037-5015, 2006.

A. Shanian, A. S. Milani, C. Carcon, and R. C. Abeyarante, A New Application of ELECTRE III and Revised SIMO's Procedure of Group Material Selection under Weighting Uncertainty, Journal of Knowledge Based Systems, vol.21, pp.709-720, 2008.

F. Sharon, Additive manufacturing technology: potential implications for U.S. manufacturing Competitiveness, Journal of International Commerce and Economics, vol.6, issue.1, pp.41-74, 2014.

H. R. Shercliff and A. M. Lovatt, Selection of manufacturing processes in design and the role of process modelling, Journal of Progress in Materials Science, vol.46, pp.429-459, 2001.

P. Shi, Neural network approach to material selection for injection molded parts. Harbin Gongye Daxue Xuebao, p.37, 2005.

S. Singh, E. U. Olugu, S. N. Musa, A. B. Mahat, and K. Y. Wong, Strategy selection for sustainable manufacturing with integrated AHP-VIKOR method under interval-valued fuzzy environment, International Journal of Advanced Manufacturing Technology, 2015.

A. Skander, L. Roucoules, and J. S. Klein-meyer, Design and manufacturing interface modelling for manufacturing processes selection and knowledge synthesis in design, International Journal of Advanced Manufacturing Technology, vol.37, pp.443-454, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00940085

. Smartech, 3D Printing 2014: A survey of SmarTech's annual findings, 2014.

L. N. Smith, R. M. German, and M. L. Smith, A neural network approach for solution of the inverse problem for selection of powder metallurgy materials, Journal of Material Process Technology, vol.120, pp.419-425, 2002.

A. K. Sood, R. K. Ohdar, and S. S. Mahapatra, Experimental investigation and empirical modelling of FDM process for compressive strength improvement, Journal of Advanced Research, vol.3, issue.1, pp.81-90, 2012.

M. Srivastava and S. Rathee, Optimization of FDM process parameters by Taguchi method for imparting customized properties to components, Virtual and Physical Prototyping, 2018.

R. Sroufe, S. Curkovic, F. Montabon, and S. A. Melnyk, The new product design process and design for environment, International Journal of Operations and Production Management, vol.20, issue.2, pp.267-291, 2000.

R. Stark, S. Kind, and S. Neumeyer, Innovations in digital modelling for next generation manufacturing system design, CIRP Annals -Manufacturing Technology, vol.66, issue.1, pp.169-172, 2017.

S. Stopp, T. Wolff, F. Irlinger, and T. Lueth, A new method for printer calibration and contour accuracy manufacturing with 3D-print technology, Rapid Prototyping Journal, vol.14, issue.3, pp.167-172, 2008.

X. Tang, D. H. Bassir, and W. Zhang, Shape, sizing optimization and material selection based on mixed variables and genetic algorithm, Journal of Optimization Engineering, vol.12, pp.111-128, 2011.

Y. Tang, J. Y. Hascoet, and Y. F. Zhao, Integration of topological and functional optimization in design for additive manufacturing, Proceedings of the ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, pp.1-8, 2014.

C. Telenko and C. C. Seepersad, A comparison of the energy efficiency of selective laser sintering and injection molding of nylon parts, Rapid Prototyping Journal, vol.18, issue.6, pp.472-481, 2012.

A. Thibault, A. Siadat, M. Sadeghi, R. Bigot, and P. Martin, Knowledge formalization for product-process integration applied to forging domain, International Journal for Advanced Manufacturing Technology, vol.44, pp.1116-1132, 2008.

K. Thirmurthulu, P. M. Pandey, and R. N. Venkata, Optimum part deposition orientation in fused deposition modeling, International Journal of Machine Tools and Manufacture, vol.44, issue.6, pp.585-594, 2004.

D. S. Thomas, Economics of the U.S. additive manufacturing industry. National Institute of Standards and Technology (NIST) Special Publication 1163, 2013.

M. K. Thompson, A. Stolfi, and M. Mischkot, Process chain modeling and selection in an additive manufacturing context, CIRP Journal of Manufacturing Science and Technology, vol.12, pp.25-34, 2016.
DOI : 10.1016/j.cirpj.2015.09.005
URL : http://orbit.dtu.dk/en/publications/process-chain-modeling-and-selection-in-an-additive-manufacturing-context(4bb16d5a-c27d-4b0a-ab26-1c0da51923ce).html

M. K. Thompson, G. Moroni, T. Vaneker, G. Fadel, R. I. Campbell et al., Design for additive manufacturing: trends, opportunities, considerations and constraints, CIRP Annals -Manufacturing Technology, vol.65, pp.737-760, 2016.
DOI : 10.1016/j.cirp.2016.05.004
URL : http://dspace.lib.cranfield.ac.uk/bitstream/1826/10133/3/Design_for_additive_manufacturing-2016.pdf

S. Tichkiewitch and M. Veron, Integration of manufacturing processes in design, CIRP Annals, vol.47, issue.1, pp.99-102, 1998.

S. Upcraft and R. Fletcher, The rapid prototyping technologies, Journal of Rapid Prototyping, vol.23, issue.4, pp.318-330, 2003.

M. Vaezi, S. Chianrabutra, and B. Mellor, Multiple material additive manufacturing -Part 1: a review, Journal of Virtual and Physical Prototyping, vol.8, issue.1, pp.19-50, 2012.
DOI : 10.1080/17452759.2013.778175

B. Vayre, F. Vignat, and F. Villeneuve, Metallic additive manufacturing: state-of-the-art review and prospects, Journal of Mechanics & Industry, vol.13, pp.89-96, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00735206

B. Vayre, F. Vignat, and F. Villeneuve, Designing for additive manufacturing, 45th CIRP Conference on Manufacturing Systems, vol.3, pp.632-637, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00733693

H. Wang and D. W. Rosen, Parametric modeling method for truss structures, Proceedings of 2002 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC02/CIE-34495, pp.759-767, 2002.
DOI : 10.1115/detc2002/cie-34495

S. Y. Wang and K. Tai, Structural topology design optimization using genetic algorithms with a bit-Array representation, Computer Methods in Applied Mechanics and Engineering, vol.194, pp.3749-3770, 2005.
DOI : 10.1016/j.cma.2004.09.003

C. C. Wang, T. W. Lin, and S. S. Hu, Optimizing the rapid prototyping process by integrating the Taguchi method with the Gray relational analysis, Rapid Prototyping Journal, vol.13, issue.2, pp.304-315, 2007.

D. E. Whitney, Manufacturing by design, Harvard Business Review, vol.66, issue.4, pp.83-91, 1988.

T. Wohlers and T. Gornet, History of additive manufacturing, Wohlers Report, 2014.

T. Wohlers, Wohlers report 2016: Global reports, Wohlers Associates, 2016.

T. Wohlers, Wohlers report 2014: 3D printing and additive manufacturing state of the industry, 2016.

I. C. Wright, Design methods in engineering and product design, 1998.

Y. Xie and G. P. Steven, A simple evolutionary procedure for structural optimization, Computer & Structures, vol.49, issue.5, pp.885-896, 1993.
DOI : 10.1016/0045-7949(93)90035-c

X. Xu, S. Meteyer, N. Perry, and Y. F. Zhao, Energy consumption model of Binder-jetting additive manufacturing processes, International Journal of Production Research, vol.53, issue.23, pp.7005-7015, 2015.
DOI : 10.1080/00207543.2014.937013
URL : https://hal.archives-ouvertes.fr/hal-01168821

S. Yang and Y. F. Zhao, Additive manufacturing -enabled design theory and methodology: a critical review, International Journal of Advanced Manufacturing Technology, 2015.
DOI : 10.1007/s00170-015-6994-5

A. Yao and Y. Tseng, A robust process optimization for a powder type rapid prototype, Rapid Prototyping Journal, vol.8, issue.3, pp.180-189, 2002.

M. Yazdani and A. Jahan, Analysis in material selection: influence of normalization tools on COPRAS-G, Economic Computation and Economic Cybernetics Studies and Research, vol.51, pp.59-74, 2017.

E. A. Yazdi, J. Gardan, and P. Lafon, Integrated design in additive manufacturing based on design for manufacturing, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol.10, issue.6, pp.1109-1116, 2016.

S. Yim and D. Rosen, Build time and cost models for additive manufacturing process selection, Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE, 2012.

V. Young, O. Querin, G. Steven, and Y. Xie, 3D and multiple load case Bi-directional evolutionary structural optimization (BESO), Journal of Structural and Multi-Disciplinary Optimization, vol.18, issue.2-3, pp.183-192, 1999.

L. A. Zadeh, Fuzzy sets, Information and Control, vol.8, issue.3, pp.338-353, 1965.

U. K. Zaman, A. Siadat, M. Rivette, A. A. Baqai, and L. Qiao, Integrated product-process design to suggest appropriate manufacturing technology: a review, International Journal of Advanced Manufacturing Technology, vol.91, issue.1-4, pp.1409-1430, 2017.

U. K. Zaman, M. Rivette, A. Siadat, and S. M. Mousavi, Integrated product-process design: material and manufacturing process selection for additive manufacturing using multicriteria decision making, Robotics and Computer Integrated Manufacturing, vol.51, pp.169-180, 2018.

U. K. Zaman, M. Rivette, A. Siadat, and A. A. Baqai, Integrated design-oriented References 142 framework for resource selection in additive manufacturing, Procedia CIRP, vol.70, pp.96-101, 2018.

U. K. Zaman, . E. Boesch, A. Siadat, M. Rivette, and A. A. Baqai, Impact of fused deposition modelling (FDM) process parameters on strength of built parts using Taguchi design of experiments, International Journal of Advanced Manufacturing Technology, 2018.

M. H. Zarandi, S. Mansour, S. A. Hosseinijou, and M. Avazbeigi, A material selection methodology and expert system for sustainable product design, International Journal of Advanced Manufacturing Technology, vol.57, pp.885-903, 2011.

X. F. Zha, A web-based advisory system for process and material selection in concurrent product design for a manufacturing environment, International Journal of Advanced Manufacturing Technology, vol.25, pp.233-243, 2005.

Y. Zhang and H. Liu, Application of rapid prototyping technology in die making of diesel engine, Tsinghua Science & amp; Technology, issue.0, pp.127-131, 2009.

J. W. Zhang and A. H. Peng, Process-parameter optimization for fused deposition modelling based on Taguchi method, Advanced Materials Research, vol.538, pp.444-447, 2012.

L. Zhang, Y. Luo, F. Tao, B. H. Li, L. Ren et al., Cloud manufacturing: a new manufacturing paradigm, Enterprise Information Systems, vol.8, issue.2, pp.167-187, 2014.

C. C. Zhou, G. F. Yin, and X. B. Hu, Multi-objective optimization of material selection for sustainable products: artificial neural networks and genetic algorithm approach, Journal of Material Design, vol.30, pp.1209-1215, 2009.