, Recommandations pour l'emploi de la méthode convergence-confinement, Tunnels et Ouvrages Souterrains, vol.170, pp.79-89, 2002.

, In-situ compressive stress within solid unit masonry estimated using flat-jack measurements, ASTM, pp.1196-91, 1991.

Ö. Aydan, T. Akagi, and T. Kawamoto, The squeezing potential of rocks around tunnels; theory and prediction. Rock mechanics and rock engineering, vol.26, pp.137-163, 1993.

Ö. Aydan, T. Akagi, and T. Kawamoto, The squeezing potential of rock around tunnels: theory and prediction with examples taken from Japan. Rock mechanics and rock engineering, vol.29, pp.125-143, 1996.

G. Barla and P. P. Rossi, Stress measurements in tunnel linings, 1983.

G. Barla, Squeezing rocks in tunnels, ISRM News journal, pp.44-49, 1995.

G. Barla, Tunnelling under squeezing rock conditions. Euro-summer-School in Tunnel Mechanics, pp.169-268, 2001.

G. Barla, M. Bonini, and D. (. Debernardi, Modelling of tunnels in squeezing rock, ECCOMAS Thematic Conference on Computational Methods. Tunnelling, 2007.

G. Barla, M. Bonini, and D. Debernardi, Time Dependent Deformations in Squeezing Tunnels, 12th International Conference of International Association for Computer Methods and Advances in Geomechanics (IACMAG), 2008.

G. Barla, M. Bonini, and D. Debernardi, Time Dependent Deformations in Squeezing Tunnels, International Journal of Geoengineering Case Histories, vol.2, issue.1, pp.40-65, 2010.

G. Barla, D. Debernardi, and D. Sterpi, Time-dependent modeling of tunnels in squeezing conditions, International Journal of Geomechanics ASCE, pp.697-710, 2011.

G. Barla, M. Barla, D. Debernardi, and M. Bonini, Guidelines for TBM tunnelling in squeezing conditions -a case study, Géotechnique Letters, vol.4, pp.83-87, 2014.

G. Barla, Full-face excavation of large tunnels in difficult conditions, Journal of Rock Mechanics and Geotechnical Engineering, vol.8, issue.3, pp.294-303, 2016.

N. Barton, R. Lien, and J. Lunde, Engineering classification of rock masses for the design of tunnel support, Rock mechanics, vol.6, issue.4, pp.189-236, 1974.

J. Beau, J. Cabanius, G. Courtecuisse, D. Fourmaintraux, P. Gesta et al.,

G. Vouille, Tunnel du Fréjus: les mesures géotechniques effectuées sur le chantier français et leur application pour la détermination et l'adaptation du soutènement provisoire, Revue Française de Géotechnique, vol.12, pp.57-82, 1980.

K. Bergmeister, Brenner base tunnel: link between Munich and Verona, Tunnel, vol.1, pp.9-20, 2007.

D. Bernaud and G. Rousset, La « nouvelle méthode implicite » pour l'étude du dimensionnement des tunnels, Revue française de Géotechnique, vol.60, pp.5-26, 1992.

D. Bernaud, I. Benamar, and G. Rousset, La « nouvelle méthode implicite » pour le calcul des tunnels dans les milieux élastoplastiques et viscoplastiques. Revue française de Géotechnique, vol.68, pp.3-19, 1994.

Z. T. Bieniawski, Engineering classification of jointed rock masses, Civil Engineer in South Africa, issue.12, p.15, 1973.

Z. T. Bieniawski, Engineering rock mass classifications: a complete manual for engineers and geologists in mining, civil, and petroleum engineering, 1989.

D. Billaux and P. Cundall, Simulation des géomatériaux par la méthode des éléments Lagrangiens. Revue française de Géotechnique, pp.9-21, 1993.

E. Boidy, Modélisation numérique du comportement différé des cavités souterraines (Doctoral dissertation, 2002.

M. Bonini and G. Barla, The Saint Martin La Porte access adit (Lyon-Turin Base Tunnel) revisited. Tunnelling and Underground Space Technology Incorporating Trenchless Technology Research, vol.30, pp.38-54, 2012.

L. Cantieni and G. Anagnostou, The effect of the stress path on squeezing behavior in tunneling. Rock mechanics and rock engineering, vol.42, pp.289-318, 2009.

L. Cantieni, G. Anagnostou, and R. Hug, Interpretation of core extrusion measurements when tunnelling through squeezing ground. Rock mechanics and rock engineering, vol.44, p.641, 2011.

S. A. Cartney, The Ubiquitous Joint Method. Cavern Design at Dinorwic Power Station, Tunnels & Tunneling, vol.9, pp.54-57, 1977.

F. Corbetta, D. Bernaud, and D. Nguyen-minh, Contribution à la méthode convergenceconfinement par le principe de la similitude. Revue française de géotechnique, vol.54, pp.5-11, 1991.

S. Dalg?ç, Tunneling in squeezing rock, the Bolu tunnel, Anatolian Motorway, Turkey. Engineering Geology, vol.67, issue.1-2, pp.73-96, 2002.

D. Deere, The rock quality designation (RQD) index in practice. In Rock classification systems for engineering purposes, 1988.

G. C. De-labriolle, Amélioration des méthodes analytiques basées sur des concepts, simples pour le dimensionnement des tunnels superficiels et profonds en sol meuble, Revue Française de Géotechnique, vol.151, issue.2, 2017.

M. De-la-fuente, J. Sulem, R. Taherzadeh, and D. Subrin, Traitement et rétro-analyse des auscultations réalisées dans le tunnel routier du Fréjus et sa galerie de sécurité lors de leurs constructions respectives, Congrès International AFTES 2017, vol.155, 2017.

M. De-la-fuente, R. Tahezadeh, J. Sulem, and D. Subrin, Analysis and comparison of the measurements of Fréjus road tunnel and of its safety gallery, Eurock symposium, pp.2-1143, 2018.

H. H. Einstein, Underground Structures Design and Instrumentation Developments in Geotechnical Engineering, pp.202-262, 1989.

Z. Eisenstein and P. Branco, Convergence-Confinement method in shallow tunnels. Tunnelling and underground space technology, vol.6, pp.343-346, 1991.
DOI : 10.1016/0886-7798(91)90146-u

, Design of concrete structures, Eurocode, vol.2, 2005.

W. Flügge, Stresses in shells, Google scholar, p.449, 1960.

G. Gioda, On the non-linear 'squeezing'effects around circular tunnels, International Journal for Numerical and Analytical Methods in Geomechanics, vol.6, issue.1, pp.21-46, 1982.
DOI : 10.1002/nag.1610060104

R. K. Goel, J. L. Jethwa, and A. G. Paithakan, Tunnelling through the young Himalayas -a case history of the Maneri-Uttarkashi power tunnel, Engineering Geology, vol.39, issue.1-2, pp.31-44, 1995.

C. Gonzalez-nicieza, A. E. Alvarez-vigil, A. Menendez-diaz, and C. Gonzalez-palacio, Influence of the depth and shape of a tunnel in the application of the convergence-confinement method, Tunnelling and Underground Space Technology, vol.21, issue.1, pp.25-37, 2008.

E. Grimstad and N. Barton, Updating of the Q-system for NMT, Proceedings of the International Symposium on Sprayed Concrete. Modern Use of Wet Mix Sprayed Concrete for Underground Support, 1993.

E. Grimstad, K. Kankes, R. Bhasin, A. W. Magnussen, and A. Kaynia, Rock mass quality Q used in designing reinforced ribs of sprayed concrete and energy absorption, 2002.

L. M. Guayacán-carrillo, J. Sulem, D. M. Seyedi, S. Ghabezloo, A. Noiret et al., Analysis of Long-Term Anisotropic Convergence in Drifts Excavated in Callovo-Oxfordian Claystone, Rock Mechanics and Rock Engineering, vol.49, issue.1, pp.97-114, 2016.

E. A. Hanafy and . Emery, Advancing face simulation of tunnel excavation and lining. Placement, Underground Rock Engineering, 13th Canadian Rock Mechanics Symposium, pp.119-125, 1980.

R. Hasanpour, Advance numerical simulation of tunneling by using a double shield TBM, Computers and Geotechnics, vol.57, pp.37-52, 2014.

R. Hasanpour, J. Rostami, and B. Ünver, 3D finite difference model for simulation of double shield TBM tunneling in squeezing grounds, Tunnelling and Underground Space Technology, vol.40, pp.109-126, 2014.

R. Hasanpour, J. Rostami, and G. Barla, Impact of Advance Rate on Entrapment Risk of a DoubleShielded TBM in Squeezing Ground, Rock Mechanics and Rock Engineering, vol.48, issue.3, pp.1115-1130, 2015.

E. Hoek and E. T. Brown, Empirical strength criterion for rock masses, Journal of Geotechnical and Geoenvironmental Engineering, vol.106, issue.GT9, pp.1013-1035, 1980.

E. Hoek, Strength of rock and rock masses, ISRM News Journal, vol.2, issue.2, pp.4-16, 1994.

E. Hoek, P. Marinos, and M. Benissi, Applicability of the Geological Strength Index (GSI) classification for very weak and sheared rock masses. The case of the Athens Schist Formation, Bulletin of Engineering Geology and the Environment, vol.57, issue.2, pp.151-160, 1998.

E. Hoek and P. Marinos, Predicting tunnel squeezing problems in weak heterogeneous rock masses. Tunnels and Tunnelling International, 45-51: part one, pp.33-36, 2000.

E. Hoek, Big tunnels in bad rock, Journal of Geotechnical and Geoenvironmental Engineering, vol.127, issue.9, pp.726-740, 2001.
DOI : 10.1061/(asce)1090-0241(2001)127:9(726)

E. Hoek, C. Carranza-torres, and B. Corkum, Hoek-Brown failure criterion-2002 edition, Proceedings of NARMS-Tac, vol.1, pp.267-273, 2002.

E. Hoek, Practical rock engineering, 2007.

E. Hoek and R. Guevara, Overcoming squeezing in the Yacambú-Quibor tunnel, Venezuela. Rock Mechanics and Rock Engineering, vol.42, pp.389-418, 2009.

, Fast Lagrangian analysis of continua (FLAC3D), ITASCA, 2011.

J. L. Jethwa and B. Singh, Estimation of ultimate rock pressure for tunnel linings under squeezing rock conditions -a new approach. Design and Performance of Underground Excavations, ISRM Symposium, pp.231-238, 1984.

J. L. Jethwa and B. B. Dhar, Tunnelling under Squeezing Ground Condition, Proc. Recent Advances in Tunnelling Technology, pp.209-214, 1996.

V. N. Kazakidis and M. S. Diederichs, Tehnical Note: Understanding Jointed Rock Mass Behavior Using a Ubiquitous Joint Approach, International Journal of Rock Mechanics and Mining Science, pp.163-172, 1993.

K. Kovári, C. Amstad, and H. Koppel, New developments in the instrumentation of underground openings, Proceedings of the 4th Rapid Excavation and Tunnelling Conference, pp.817-837, 1979.

K. Kovari, Rock deformation problems when using full-facing cutting equipment in rock, pp.289-298, 1986.

K. Kovári, The two base tunnels of the Alptransit project: Lötschberg and Gotthard, Weltneuheiten im Tunnelbau= Worldwide Innovations in Tunnelling= Innovations mondiale dans la Construction de Tunnel: Vorträge World Tunnel Congress/STUVA-TAGUNG'95 in, vol.36, pp.23-29, 1995.

K. Kovari, Tunnelling in squeezing rock, Tunnel, vol.5, pp.12-31, 1998.

S. W. Lee, J. W. Jung, S. W. Nam, and I. M. Lee, The influence of seepage forces on ground reaction curve of circular opening. Tunnelling and Underground Space Technology, vol.22, pp.28-38, 2007.

M. Levy, G. Courtecuisse, and J. P. Barral, Les travaux du tunnel routier du Fréjus. Annales de l'ITBTP, 400 (TRAV PUBLICS-19), 1981.

G. Li, H. Li, H. Kato, and Y. Mizuta, Application of ubiquitous joint model in numerical modeling of Hilltop Mines in Japan, Chines Journal of Rock Mechanics and Engineering, vol.22, issue.6, pp.951-956, 2003.

P. Lunardi and . Partie, REV FR GEOTECH, issue.12, 1980.

P. Lunardi, R. Bindi, and A. Focaracci, Technical and financial planning of underground works: the ADECO-RS method, VI Forum Europeo di Ingegneria EconomicaUniversità Bocconi-Milano, pp.13-14, 1993.

S. Maiolino, Fonction de charge générale en géomécanique: application aux travaux souterrains (Doctoral dissertation, 2006.

V. Marinos, P. Fortsakis, and G. Prountzopoulos, Estimation of geotechnical properties and classification of geotechnical behaviour in tunnelling for flysch rock masses, Proceedings of the 15th European Conference on Soil Mechanics and Geotechnical Engineering, vol.1, 2011.

V. Marinos, Tunnel behaviour and support associated with the weak rock masses of flysch, Journal of Rock Mechanics and Geotechnical Engineering, vol.6, issue.3, pp.227-239, 2014.

F. Mezger, G. Anagnostou, and H. J. Ziegler, The excavation-induced convergences in the Sedrun section of the Gotthard Base Tunnel. Tunnelling and underground space technology, vol.38, pp.447-463, 2013.

A. M. Muirwood, Tunnels for road and motorways, Q. J. Eng. Geol, vol.5, p.120, 1972.

R. Nakano, Geotechnical properties of mudstone of neogene tertiary in Japan, International Symposium of Rock Mechanics, vol.1, pp.75-92, 1979.

, Norwegian Geotechnical Institute) 2015. Using the Q-system

D. Nguyen-minh and C. Guo, Recent progress in convergence-confinement method, Eurock', vol.96, pp.855-860, 1996.
URL : https://hal.archives-ouvertes.fr/hal-00116415

X. S. Nguyen, Evaluation des performances d'un tunnelier, 2018.

P. Oreste, The Convergence-Confinement Method: Roles and Limits in Modern Geomechanical Tunnel Design, American Journal of Applied Sciences, vol.6, issue.4, pp.757-771, 2009.

O. Td, Guidelines for tunnel lining design, 1984.

M. Panet and P. Guellec, Contribution à l'étude du soutènement d'un tunnel à l'arrière du front de taille. Progrès en mécanique des roches comptes rendus du 3eme congrès de la société internationale de mécanique des roches, 1974.

M. Panet and A. Guenot, Analysis of convergence behind the face of a tunnel. Tunnelling 82, proceeding of the 3rd international symposium, pp.197-204, 1983.

M. Panet, Le calcul des tunnels par la méthode convergence-confinement, Presses de l'Ecole Nationale des ponts et chaussées, 1995.

M. Panet, Two case histories of tunnels through squeezing rocks. Rock mechanics and rock engineering, vol.29, pp.155-164, 1996.

F. Pellet, Contact between a tunnel lining and a damage-susceptible viscoplastic medium, Comput Model Eng Sci, vol.52, issue.3, pp.279-295, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01267644

D. Plana, C. López, C. J. Muñoz, and P. , Numerical Analysis of a Tunnel in an Anisotropy Rock Mass. Envalira Tunnel (Principality of Andorra). Engineering Geology for Infrastructure Planning in Europe, pp.153-161, 2004.

M. Ramoni and G. Anagnostou, On the feasibility of TBM drives in squeezing ground, Tunnelling and Underground Space Technology, vol.21, issue.3, pp.262-262, 2006.

M. Ramoni and G. Anagnostou, TBM drives in squeezing ground-Shield-Rock interaction. Building underground for the future, pp.163-172, 2008.

M. Ramoni and G. Anagnostou, Thrust force requirements for TBMs in squeezing ground, Tunnelling and Underground Space Technology, vol.25, issue.4, pp.433-455, 2010.

M. Ramoni and G. Anagnostou, The Interaction Between Shield, Ground and Tunnel Support in TBM Tunnelling Through Squeezing Ground, Rock Mechanics Rock Engineering, vol.44, pp.37-61, 2011.

M. Ramoni, N. Lavdas, and G. Anagnostou, Squeezing loading of segmental linings and the effect of backfilling, Tunneling and Underground Space technology, vol.26, issue.6, pp.692-717, 2011.

P. Richard, F. Pogu, and M. Augereau, Tunnel de base du Lötschberg: 28 km d'excavation pour le lot de Mitholz, Travaux, vol.834, pp.26-31, 2006.

G. Russo, L. Repetto, J. Piraud, and R. Laviguerie, Back-analysis of the extreme squeezing conditions in the exploratory adit to the Lyon-Turin base tunnel, pp.9-14, 2009.

W. Schubert and P. Schubert, Tunnels in squeezing rock: Failure phenomena and counteractions. Assessment and prevention of failure phenomena in rock engineering, International Symposium Instabul, pp.479-484, 1993.

R. Schürch and G. (. Anagnostou, The applicability of the ground response curve to tunnelling problems that violate rotational symmetry, Rock mechanics and Rock Engineering, vol.45, issue.1, pp.1-10, 2012.

B. Singh, J. L. Jethwa, A. K. Dube, and B. Singh, Correlation between observed support pressure and rock mass quality, Tunnelling and Underground Space Technology, vol.7, pp.59-74, 1992.

B. Sing and G. Rk, Rock mass classification: a practical approach in Civil Engineering, 1999.

, SITAF (1982) Traforo autostradale del Fréjus

. Steinerw, Tunnelling in squeezing rocks: case histories. Rock Mechanics and Rock Engineering, vol.29, pp.211-246, 1996.

P. Steiner and R. Yeatman, New instruments improve site characterization with time based measurements, ISRM Regional Symposium-EUROCK 2009. International Society for Rock Mechanics, 2009.

M. Sharifzadeh, A. Tarifard, . Moridi, and . Ma, Time-dependent behavior of tunnel lining in weak rock mass based on displacement back analysis method. Tunnelling and Underground Space Technology, vol.38, pp.348-356, 2013.

J. Sulem, Comportement différé des tunnels profonds, Ecole Nationale des Ponts et Chaussées, 1983.

J. Sulem, M. Panet, and A. Guenot, An analytical solution for time-dependent displacements in a circular tunnel. International journal of rock mechanics and mining sciences & geomechanics abstracts, vol.24, pp.155-164, 1987.

J. Sulem, M. Panet, and A. Guenot, Closure Analysis in Deep Tunnels, International journal of rock mechanics and mining sciences & geomechanics abstracts, vol.24, issue.3, pp.145-154, 1987.

J. Sulem, Analytical methods for the study of tunnel deformation during excavation, Proceedings of the 5 th ciclo di conferenze di Mecanica e Ingegneria delle Rocce, 1994.

J. Sulem, Tunnel du Fréjus: Mesures géotechniques et interprétation, 2013.

K. Terzaghi, Rock defects and loads on tunnel supports, 1946.

T. Manh and H. , Comportement des tunnels en terrain poussant, 2014.
URL : https://hal.archives-ouvertes.fr/tel-01135356

H. Tran-manh, J. Sulem, D. Subrin, and D. Billaux, Anisotropic Time-Dependent Modeling of Tunnel Excavation in Squeezing Ground, Rock Mechanics and Rock Engineering, vol.48, issue.6, pp.2301-2317, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01254615

H. Tran-manh, J. Sulem, and D. Subrin, A Closed-Form Solution for Tunnels with Arbitrary Cross Section Excavated in Elastic Anisotropic Ground. Rock Mechanics and Rock Engineering, vol.48, pp.277-288, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01123936

H. Tran-manh, J. Sulem, and D. Subrin, Progressive degradation of rock properties and time dependent behavior of deep tunnels, Acta Geotecnica, vol.11, issue.3, pp.693-711, 2016.

A. Vinnac, Rétro-analyse du creusement au tunnelier de la galerie de sécurité du tunnel routier du Fréjus. Mémoire de mastère spécialisé 'Tunnels et Ouvrages souterrains, ENTPE, 2012.

N. Vlachopoulos and M. S. Diederichs, Improved longitudinal displacement profiles for convergence confinement analysis of deep tunnels, Rock Mechanics and Rock Engineering, vol.42, issue.2, pp.131-146, 2009.

N. Vlachopoulos and M. S. Diederichs, Appropriate uses and practical limitations of 2D numerical analysis of tunnels and tunnel support response, Geotechnical and Geological Engineering, vol.32, issue.2, pp.469-488, 2014.

T. M. Vu, J. Sulem, D. Subrin, N. Monin, and J. Lascols, Anisotropic Closure in Squeezing Rocks: The Example of Saint-Martin-la-Porte Access Gallery, Rock Mechanics and Rock Engineering, vol.46, issue.2, pp.231-246, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00789566

L. ?. Vydrová, comparison of tunneling methods NATM and ADECO-RS, 2015.

T. T. Wang and T. H. Huang, A constitutive model for the deformation of a rock mass containing sets of ubiquitous joints, International Journal of Rock Mechanics and Mining Sciences, vol.46, issue.3, pp.521-530, 2009.

T. T. Wang and T. H. Huang, Anisotropic Deformation of a Circular Tunnel Excavated in a Rock Mass Containing Sets of Ubiquitous Joints: Theory Analysis and Numerical Modeling, Rock Mechanics and Rock Engineering, vol.47, issue.2, pp.643-657, 2013.

H. Wong, D. Subrin, and D. Dias, Convergence confinement analysis of a bolt-supported tunnel using the homogenization method, Canadian geotechnical journal, vol.43, issue.5, pp.462-483, 2006.

K. Zhao, M. Janutolo, and G. Barla, A completely 3D model for the simulation of mechanized tunnel excavation, Rock Mech Rock Eng, vol.45, issue.4, pp.475-497, 2012.

K. Zhao, M. Bonini, D. Debernardi, M. Janutolo, G. Barla et al., Computational modelling of the mechanised excavation of deep tunnels in weak rock, Computers and Geotechnics, vol.66, p.158, 2015.

. Appendix-c--, Total set of results of the comparison of oe(?) * between the different approaches