S. Abrate, Impact on composite structures, 1998.

S. Abrate, Modeling of impacts on composite structures, Composite Structures, vol.51, pp.129-138, 2001.

E. Abdallah, ;. Abi, C. ;. Bouvet, . Rivallant, ;. Samuel et al.,

J. Barrau, Experimental analysis of damage creation and permanent indentation on highly oriented plates, Composites Science and Technology, vol.69, pp.1238-1245, 2009.

V. Achard, C. Bouvet, B. Castanié, and C. Chirol, Discrete ply modelling of open hole tensile tests, Composite Structures, vol.113, issue.1, pp.369-381, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01063573

D. Adams and E. Lewis, Experimental Study of Three-and Four-Point Shear Test Specimens, Technology and Research, vol.17, issue.4, pp.341-349, 1995.

M. Xie and D. F. Adams, Study of three-and four-point shear testing of unidirectional composite materials, Composites, vol.26, issue.9, 1995.

, Airbus Industrie Test Method: Fiber Reinforced Plastics Determination of Compression Strength after Impact, 1994.

O. Allix, D. Lévêque, and L. Perret, Identification and forecast of delamination in composite laminates by an interlaminar interface model, Composites Science and Technology, vol.58, pp.671-678, 1998.
URL : https://hal.archives-ouvertes.fr/hal-01745227

O. Allix and J. Deü, Delay-damage modelling for fracture prediction of laminated composites under dynamic loading, Engineering Transactions, vol.45, pp.29-46, 1997.

G. Alfano and M. A. Crisfield, Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues, International journal for numerical methods in engineering, vol.50, pp.1701-1736, 2001.

O. Allix and P. ;-ladevèze, Interlaminar interface modelling for the prediction of delamination, Composite Structures, vol.22, pp.235-242, 1992.
URL : https://hal.archives-ouvertes.fr/hal-01745254

O. Allix and P. Ladevèze, Damage analysis of interlaminar fracture specimens, Comp. Struc, vol.31, pp.61-74, 1995.
URL : https://hal.archives-ouvertes.fr/hal-01745239

Y. ;. Aoki, . Suemasu, ;. Hiroshi, and T. Ishikawa, Damage propagation in CFRP laminates subjected to low velocity impact and static indentation, Advanced Composite Materials, vol.16, pp.924-3046, 2007.

, ASTM standard test method for mode I interlaminar fracture toughness of unidirectional continuous fiber reinforced composite materials, ASTM, pp.5528-94, 1994.

, ASTM D 5766-11, Open-Hole Tensile Strength of Polymer Matrix Composite Laminates, 1995.

, ASTM D 6484-14, Open-Hole Compressive Strength of Polymer Matrix Composite Laminates, 1999.

, ASTM D 6742-12, Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates, 2001.

, ASTM: Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates, ASTM Standards, 2006.

S. Astm, Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates, 2006.

F. Aymerich, F. Dore, and P. Priolo, Simulation of multiple delaminations in impacted cross-ply laminates using a finite element model based on cohesive interface elements, Composites Science and Technology, vol.69, pp.1699-709, 2009.

A. ;. Baker, . Dutton, ;. Stuart, and D. Kelly, Composite Materials for Aircraft Structures, vol.43, p.1563475405, 2004.

K. Bhalla, A. Zehnder, and X. Han, Thermomechanics of slow stable crack growth : closing the loop between experiments and computational modeling, Engineering Fracture Mechanics, vol.70, issue.17, pp.2439-2458, 2003.

P. Bazant and H. B. Oh, Crack band theory for fracture of concrete, Matériaux et Constructions, vol.16, pp.155-77, 1983.

G. I. Barenblatt, Mathematical theory of equilibrium cracks in brittle failure, Advances in Applied Mechanics, vol.7, pp.55-129, 1962.

L. Ballere, P. Viot, J. Lataillade, L. Guillaumat, and S. Cloutet, Damage tolerance of impacted curved panels, International Journal of Impact Engineering, vol.36, issue.2, pp.243-253, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00548164

C. ;. Bouvet, . Castanié, ;. Bruno, M. ;. Bizeul, and J. Barrau, Low velocity impact modelling in laminate composite panels with discrete interface elements, International Journal of Solids and Structures, vol.46, pp.2809-2821, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01851855

P. Beguelin, M. Barbezat, and H. H. Kausch, Mechanical characterization of polymers and composites with a servohydraulic high-speed tensile tester, J. Phys. III, vol.1, issue.12, pp.1867-1880, 1991.
URL : https://hal.archives-ouvertes.fr/jpa-00248708

M. L. Benzeggagh and M. Kenane, Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus, Composites Science and Technology, vol.56, pp.439-449, 1996.

M. H. Belgen, Structural stress measurement with an infrared radiometer, ISA Transactions, vol.6, pp.49-53, 1967.

B. Berthel, Mesures thermographiques de champs de dissipation accompagnant la fatigue à grand nombre de cycle des aciers, 2007.
URL : https://hal.archives-ouvertes.fr/tel-00410074

L. Berger and W. J. Cantwell, Temperature and loading rate effects in the mode II interlaminar fracture behavior of carbon fiber reinforced PEEK, Polym. Comp, vol.22, issue.2, pp.271-281, 2001.

M. Bever, D. Holt, and A. Titchener, The stored energy of cold work, 1973.

C. ;. Bouvet, . Hongkarnjanakul, ;. Natthawat, . Rivallant, ;. Samuel et al., Discrete modelling of inter-and intra-laminar failure for impact in composites, Dynamic Failure of composite and sandwich structures, vol.192, pp.339-392

B. Blackman, J. P. Dear, A. J. Kinloch, H. Macgillivray, Y. Wang et al., The failure of fibre composites and adhesively bonded fibre composites under high rates of test, Part III, J. Mat. Sci, vol.31, pp.4467-4477, 1996.

B. R. Blackman and A. J. Kinloch, Protocol for the Determination of the Mode I Adhesive Fracture Energy, GIC, of Structural Adhesives using the Double Cantilever Beam (DCB) and the Tapered Double Cantilever Beam (TDCB) Specimens. Fracture mechanics testing methods for polymers, 2001.

B. Blackman, A. Kinloch, and M. Paraschi, The determination of the mode II adhesive fracture resistance, G IIC , of structural adhesive joints : an effective crack length approach, Engineering Fracture Mechanics, vol.72, issue.6, pp.877-897, 2005.

J. L. Bluhm, Fracture Arrest, Fracture : an advanced treatise, 1969.

, Boeing: Advanced Composite Compression Tests, 1988.

F. Bordeu, P. A. Boucard, and G. Lubineau, A mesoscale model for damage, cracking and delamination prediction in composite materials, Journal of Science and Engineering of Composite Materials, vol.17, issue.4, pp.271-282, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01696932

A. J. Brunner, B. R. Blackman, and P. Davies, Mode I delamination. Fracture mechanics testing methods for polymers, adhesives and composites, vol.28, pp.277-305, 2001.

A. Brunner, B. Blackman, and P. Davies, A status report on delamination resistance testing of polymer-matrix composites, Engineering Fracture Mechanics, vol.75, issue.9, pp.2779-2794, 2008.

H. Bui, A. Ehrlacher, and Q. Nguyen, Mécanique des solides anélastiques -Étude expérimentale de la dissipation dans la propagation de fissure par thermographie infrarouge, C. R. Acad. Sc, vol.293, pp.1015-1019, 1981.

D. J. Bull, S. M. Spearing, and I. Sinclair, Observations of damage development from compression-after-impact experiments using ex situ micro-focus computed tomography, Composites Science and Technology, vol.97, pp.106-114, 2014.

W. Cantwell and P. Curtis,

J. Morton, Impact and subsequent fatigue damage growth in carbon fibre laminates, International Journal of Fatigue, vol.6, issue.2, pp.113-118, 1984.

W. J. Cantwell and J. Morton, The impact resistance of composite materials-a review, Composites, vol.22, issue.5, pp.347-362, 1991.

W. Cantwell, P. Curtis, and J. , An Assessment of the Impact Performance of CFRP Reinforced with High-strain Carbon Fibres, Composites Science and Technology, vol.25, pp.133-148, 1986.

M. ;. Calomfirescu and H. Hickethier, Damage tolerance of composite structures in aircraft industry Introduction Status quo, 2010.

G. T. Camacho and M. Ortiz, Computational modelling of impact damage in brittle materials, International Journal of Solids and Structures, vol.33, issue.20, pp.2899-2938, 1996.

P. Cavaliere, A. Santis, F. Panella, and A. Squillace, Thermoelasticity and CCD analysis of crack propagation in AA6082 friction stir welded joints, International Journal of Fatigue, vol.31, issue.2, pp.385-392, 2009.

H. Chai, Interlaminar shear fracture of laminated composites, Int. J. Fract, vol.43, pp.117-131, 1990.

C. Choi, H. Y. Jeng, and S. , Study on impact damage in laminated composites, Mechanics of Materials, vol.10, pp.83-95, 1990.

J. Charrier, N. Carrère, F. Laurin, E. Goncalves-novo, and S. Mahdi, Proposition d'une méthode d'analyse dédiée aux structures composites soumises à des sollicitations hors-plan, Comptes rendus des 17èmes Journées Nationales sur les Composites, 2011.

F. K. Chang and K. Y. Chang, Progressive damage model for laminated composites containing stress concentrations, J Compos Mater, vol.21, issue.9, pp.834-55, 1987.

H. Choi and . Yun,

. Chang and . Fu-kuo, A Model for predicting Damage in

, Graphite/epoxy Laminated Composites Resulting from Low-Velocity Point Impact, Journal of Composite Materials, vol.26, issue.14, pp.2134-2169, 1992.

J. Chen, M. Crisfield, A. J. Kinloch, E. P. Busso, F. L. Matthews et al., Predicting progressive delamination of composite material specimens via interface elements, Mechanics of Composite Materials and Structures, vol.6, issue.4, pp.301-317, 1999.

A. Chrysochoos, J. Chezeaux, and H. Et-caumon, Analyse thermomécanique des lois de comportement par thermographie infrarouge, Revue de Physique Appliquée, vol.24, issue.2, pp.215-225, 1989.

A. Chrysochoos and H. Louche, An infrared image processing to analyse the calorific effects accompanying strain localisation, International Journal of Engineering Science, vol.38, issue.16, pp.1759-1788, 2000.

A. Chrysochoos, J. Muracciole, and B. Et-wattrisse, Experimental analysis of strain and damage localization, Symposium on Continuous Damage and Fracture, pp.41-51, 2000.

J. H. Crews and J. R. Reeder, A mixed-mode bending apparatus for delamination testing, 1988.

P. Davies, Protocols for interlaminar fracture testing of composites, 1992.

G. Davies and X. Zhang, Impact damage prediction in carbon composite structures, Int. J. Imp. Eng, vol.16, pp.149-170, 1995.

G. A. Davies and R. Olsson, Impact on composite structures, The Aeronautical Journal, vol.108, pp.541-563, 2004.

M. F. De-moura and A. B. De-morais, Equivalent crack based analyses of ENF and ELS tests, Engineering Fracture Mechanics, vol.75, pp.2584-2596, 2008.

J. Deü, Rupture des composites stratifiés sous chargement dynamique : Apport des méso-modèles avec endommagement retardé, 1997.

E. Demuts, R. S. Whitehead, and R. B. Deo, Assessment of Damage Tolerance in Composites, Compos Struct, vol.4, pp.45-58, 1985.

F. Díaz, Some improvements in the analysis of fatigue cracks using thermoelasticity, International Journal of Fatigue, vol.26, issue.4, pp.365-376, 2004.

W. Döll, An experimental study of the heat generated in the plastic region of a running crack in different polymeric materials, Engineering Fracture Mechanics, vol.5, issue.2, pp.259-268, 1973.

G. Dorey, S. M. Bishop, and P. T. Curtis, On the impact performance of carbon fibre laminates with epoxy and PEEK matrices, Composites Science and Technology, vol.23, issue.3, pp.221-237, 1985.

D. S. Dugdale, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, p.1600225096, 1960.

S. Dumoulin, H. Louche, O. Hopperstad, and T. Børvik, Heat sources, energy storage and dissipation in high-strength steels : Experiments and modelling, European Journal of Mechanics -A/Solids, vol.29, issue.3, pp.461-474, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00453915

A. Faggiani and B. G. Falzon, Predicting low-velocity impact damage on a stiffened composite panel, Composites Part A: Applied Science and Manufacturing, vol.41, issue.6, pp.737-749, 2010.

M. Freitas and . Reis, L: Composite Failure: mechanisms on composite specimens compression after impact to vol, vol.42, pp.365-373, 1998.

K. Friedrich, R. Walter, L. Carlsson, A. Smiley, J. W. Gillespie et al., , 1989.

, Mechanisms for rate effects on interlaminar fracture toughness of carbon/epoxy and carbon/peek composites, Journal of Materials Science, vol.24, issue.9, pp.3387-3398

J. W. Gillepsie, L. A. Carlsson, and A. J. Smiley, Rate-dependent mode I interlaminar crack growth mechanisms in graphite/epoxy and graphite/peek, Comp. Sci. Tech, vol.28, pp.1-15, 1987.

U. G. Goranson, Fatigue issues in aircraft maintenance and repairs, Int J Fatigue, vol.19, pp.3-21, 1997.

A. A. Griffith, The phenomena of rupture and flow in solids, Philosophical Transactions of the Royal Society, vol.221, pp.163-198, 1921.

N. Guillaud, Tolérance aux dommages générés par impact de structures composites épaisses. Application aux réservoirs composites hyperbares, 2015.

R. Haj-ali, B. Wei, S. Johnson, and R. El-hajjar, Thermoelastic and infrared-thermography methods for surface strains in cracked orthotropic composite materials, Engineering Fracture Mechanics, vol.75, issue.1, pp.58-75, 2008.

Z. Hashin, Failure Criteria for Unidirectional Fiber Composites, Journal of Applied Mechanics, vol.47, pp.21-8936, 1980.

S. Hashemi, A. J. Kinloch, and J. G. Williams, The analysis of interlaminar fracture in uniaxial fibre-polymer composites, Proceedings of the Royal Society A : Mathematical, Physical and Engineering Sciences, vol.427, pp.173-199, 1872.

A. Hillerborg, M. Modéer, and P. Petersson, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement and Concrete Research, vol.6, pp.773-782, 1976.

N. Hongkarnjanakul, C. Bouvet, and . Rivallant, S: Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure, 2012.

N. Hongkarnjanakul, C. Bouvet, and S. Rivallant, Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure, Composite Structures, vol.106, pp.549-559, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00858522

N. Hongkarnjanakul, C. Bouvet, and . Rivallant, S: Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure, Composite Structure, vol.106, pp.549-559, 2013.

N. Hongkarnjanakul, Modélisation numérique pour la tolérance aux dommages d'impact sur stratifié composite: De l'impact à la resistance résiduelle en compression, 2013.

N. Hongkarnjanakul, S. Rivallant, C. Bouvet, and A. Miranda, Permanent indentation characterization for low-velocity impact modelling using three-point bending test, Journal of Composite Materials, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01851599

C. Huchette, Sur la complémentarités des approches expérimentales et numériques pour la modélisation des mécanismes d'endommagement des composites stratifiés, 2005.

C. Huchette and F. Guinot, Experimental and numerical analysis on delamination growth in damaged composite material, 13th European Conference on Composite Materials

M. Ilyas, Damage modeling of carbon epoxy laminated composites submitted to impact loading, 2010.

G. R. Irwin and I. Fracture, Handbuch der Physik VI, pp.558-590, 1958.

H. A. Israr, S. Rivallant, and J. J. Barrau, Experimental investigation on mean crushing stress characterization of carbon-epoxy plies under compressive crushing mode, Composite Structures, vol.96, pp.357-364, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00784973

L. M. Kachanov, On creep rupture time, Otd. Tekhn. Nauk.,Mekh. Mashinostr, vol.8, pp.26-31, 1958.

R. Kapoor and S. Nemat-nasser, Determination of temperature rise during high strain rate deformation, Mech. Mater, vol.27, issue.1, pp.1-12, 1998.

A. Kolopp, Impact sur structures sandwiches pour application de blindage aéronautique, 2012.

N. K. Kyokai, Testing Methods for Interlaminar Fracture Toughness of Carbon Fibre Reinforced Plastics, Japanese Standards Association, 1994.

P. Ladevèze, Sur la mécanique de l'endommagement des matériaux composites, p.5, 1986.

P. Ladevèze and E. Et-ledantec, Damage modelling of the elementary ply for laminated composites, Composites Science and Technology, vol.43, issue.3, pp.257-267, 1992.

F. Laurin, Approche multiéchelle des mécansimes de ruine progressive des matériaux stratifiés et analyse de la tenue de structures composites, 2005.

F. Laurin, N. Carrère, and J. Maire, A multiscale progressive failure approach for composite laminates based on thermodynamical viscoelastic and damage models, Composites: Part A, vol.38, pp.198-209, 2007.

C. Leopold and S. Harder, Influence of 90° layer thickness on damage initiation and propagation in CFRP cross ply laminates. European Conference on Composite Materials, 2016.

D. Lévêque, Analyse de la tenue au délaminage des composites stratifiés: identification d'un modèle d'interface interlaminaire, 1998.

N. Li and P. H. Chen, Micro-macro FE modelling of damage evolution in laminated composite plates subjected to low velocity impact, Compos. Struct, 2016.

Z. H. Li and J. Lambros, Strain rate effects on the thermomechanical behavior of polymers, Int. J. Sol. Struc, vol.38, issue.20, pp.3549-3562, 2001.

T. Lisle, C. Bouvet, M. L. Pastor, P. Margueres, and R. P. Corral, Damage analysis and fracture toughness evaluation in a thin woven composite laminate under static tension using infrared thermography, Composites Part A: Applied Science and Manufacturing, vol.53, pp.75-87, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00858882

T. Lisle, Analyse par thermographie infrarouge de l'endommagement des structures composites sous sollicitations quasi-statiques, 2014.

T. Lisle, C. Bouvet, N. Hongkarnjanakul, M. L. Pastor, S. Rivallant et al.,

. Margueres, Measure of fracture toughness of compressive fiber failure in composite structures using infrared thermography, Composites Science and Technology, vol.112, pp.22-33, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01847367

D. Liu, Impact-induced delamination -a view of bending stiffness mismatching, Journal of Composite Materials, vol.22, pp.674-692, 1988.

S. Liu, Z. Kutlu, and F. Et-chang, Matrix cracking and delamination in laminated composite beams subjected to a transverse concentrated line load, Journal of Composite Materials, vol.27, pp.557-584, 1993.

M. J. Laffan, S. T. Pinho, P. Robinson, L. Iannucci, and A. J. Mcmillan, Measurement of the fracture toughness associated with the longitudinal fibre compressive failure mode of laminated composites, Composites Part A: Applied Science and Manufacturing, vol.43, issue.11, pp.1930-1938, 2012.

M. Luong, Infrared thermographic scanning of fatigue in metals, Nuclear Engineering and Design, vol.158, issue.2-3, pp.363-376, 1995.

R. H. Martin and B. D. Davidson, Mode II fracture toughness evaluation using four point bend, end notched flexure test, Plastics, Rubber and Composites, vol.28, pp.401-406, 1999.

M. Hautier, Analyse des réparations des matériaux composites: mise en oeuvre d'un procédé par infiltration et étude du comportement mécanique, 2010.

M. F. De-moura, J. P. Gonçalves, and A. T. Marques, Modeling Compression Failure after Low Velocity Impact on Laminated Composites Using Interface Elements, Journal of Composite Materials, vol.31, issue.15, pp.1462-1479, 1997.

M. F. De-moura and J. P. Gonçalves, Modelling the interaction between matrix cracking and delamination in carbon-epoxy laminates under low velocity impact, Composites Science and Technology, vol.64, pp.1021-1027, 2004.

Y. Monerie, Fissuration des matériaux composites : rôle de l'interface fibre/matrice, 2000.

A. De-morais and A. Pereira, Application of the effective crack method to mode i and mode II interlaminar fracture of carbon/epoxy unidirectional laminates, Composites Part A : Applied Science and Manufacturing, vol.38, issue.3, pp.785-794, 2007.

, NASA: standard tests for toughened resin composites, 1982.

A. Needleman, A continuum model for void nucleation by inclusion debonding, Journal of applied mechanics, vol.54, pp.525-531, 1987.

K. O'brien, Composite Interlaminar Shear Fracture Toughness GIIc: shear measurement or sheer myth, Tech. Memorandum, NASA, 1997.

B. Ostre, Etude des impacts sur chant appliqués à des structures composites dans l'aéronautique, 2014.

M. Pastor, Contibution à l'étude en fatigue de structures en aluminium renforcées par patchs composites, 2007.

S. Petit, Contribution à l'étude de l'influence d'une protection thermique sur la tolérance aux dommages des structures composites des lanceurs, 2005.

A. Pereira and A. De-morais, Mode I interlaminar fracture of carbon/epoxy multidirectional laminates, Composites Science and Technology, vol.64, pp.2261-2270, 2004.

A. B. Pereira, A. B. Morais, A. T. Marques, and C. , Mode II interlaminar fracture of carbon / epoxy multidirectional laminates, Comp. Sci. Tech, vol.64, pp.1653-1659, 2004.

S. T. Pinho, L. Iannucci, and P. Robinson, Physically based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking. Part II: FE implementation, Composites Part A: Applied Science and Manufacturing, vol.37, issue.5, pp.766-777, 2006.

S. T. Pinho, Modelling failure of laminated composites using physically-based failure models, 2005.

S. T. Pinho, P. Robinson, and L. Iannucci, Fracture toughness of the tensile and compressive fibre failure modes in laminated composites, Composites Science and Technology, vol.66, issue.13, pp.2069-2079, 2006.

J. J. Polaha, B. D. Davidson, R. C. Hudson, and A. Pieracci, Effects of mode ratio, ply orientation and precracking on the delamination toughness of a laminated composite, Journal of Reinforced Plastics and Composites, vol.15, pp.141-173, 1996.

M. Poncelet, Multiaxialié, hétérogénéités intrinsèques et structurales des essais d'auto-échauffement et de fatigue à grand nombre de cycles, 2007.

P. Prombut, L. Michel, F. Lachaud, and J. J. Barrau, Delamination of multidirectional composite laminates at 0°/Theta° ply interfaces, Eng. Frac. Mech, vol.7, issue.16, pp.2427-2442, 2006.

P. Prombut, Caractérisation de la propagation de delaminage des stratifies composites multidirectionnels, 2007.

Y. N. Rabotnov, Creep rupture. XII International Congress on Applied Mechanics, 1968.

R. K. Ramakrishnan, Impact behaviour of sandwich structures with nanoparticle re-inforced composite face sheets, 2014.

J. W. Rayleigh, The theory of sound, vol.2, p.1896

J. R. Reeder, An evaluation of mixed-mode delamination failure criteria. NASA Technical Memorandum 104210, 1992.

M. ;. Renault and C. Wielgosz, Compression après impact d'une plaque stratifiée -Compression après impact d'une plaque stratifiée: étude expérimentale et modélisation éléments finis associée, 1994.

S. ;. Rivallant, C. ;. Bouvet, and N. Hongkarnjanakul, Failure analysis of CFRP laminates subjected to compression after impact: FE simulation using discrete interface elements, Composites Part A: Applied Science and Manufacturing, vol.55, pp.83-93, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00869432

J. R. Rice, A Path Independent Integral and the Approximative Analysis of Strain Concentration by Notches and Cracks, Journal of applied mechanics, vol.35, pp.379-386, 1968.

D. Rittel, On the conversion of plastic work to heat during high strain rate deformation of glassy polymers, Mech. Mat, vol.31, issue.2, pp.131-139, 1999.

M. O. Richardson and M. J. Wisheart, Review of low velocity impact properties of composite materials, Composites Part A: Applied Science and Manufacturing, vol.27, pp.1123-1131, 1996.

P. Robinson and D. Q. Song, A modified DCB specimen for mode I testing of multidirectional laminates, Journal of composite materials, vol.26, pp.1554-1577, 1992.

G. L. Rosa and A. Et-risitano, Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components, International Journal of Fatigue, vol.22, issue.1, pp.65-73, 2000.

A. J. Russell and K. N. Street, Moisture and Temperature Effects on the MixedMode Delamination Fracture of Unidirectional Graphite/Epoxy, Delamination and Debonding of Materials. Philadelphia : ASTM STP, vol.876, pp.349-370, 1985.

A. J. Russell and K. N. Street, The Effect of Matrix Toughness on Delamination: Static and Fatigue Fracture Under Mode II Shear Loading of Graphite Fiber Composites, Tough. Comp, vol.937, pp.275-294, 1987.

E. F. Rybicki and M. F. Kanninen, A Finite Element Calculation of Stress Intensity Factors by Modified Crack Closure Integral, Engineering Fracture Mechanics, vol.9, pp.931-938, 1977.

S. Sanchez-saez, E. Barbero, R. Zaera, and C. Navarro, Compression after impact of thin composite laminates, Composites Science and Technology, vol.65, issue.13, pp.1911-1919, 2005.

P. Schlosser, Influence des aspects mécaniques et thermiques sur les mécanismes de déformation d'alliages NiTi, 2008.

J. Serra, Etude expérimentale et numérique de la propagation de coupure sur des stratifiés composites soumis à des chargements complexes, 2016.

Y. Shi, C. Pinna, and C. Soutis, Modelling impact damage in composite laminates: A simulation of intra-and inter-laminar cracking, Composite Structures, vol.114, issue.1, pp.10-19, 2014.

Y. Shi, T. Swait, and C. Soutis, Modelling damage evolution in composite laminates subjected to low velocity impact, Composite Structures, vol.94, pp.2902-2913, 2012.

A. J. Smiley and R. B. Pipes, Rate sensitivity of mode II interlaminar fracture toughness in graphite/epoxy and graphite/peek composite materials, Comp. Sci. Tech, vol.29, pp.1-15, 1987.

C. Soutis and P. T. Curtis, Prediction of the post-impact compressive strength of cfrp laminated composites, Composites Science and Technology, vol.56, issue.6, pp.677-684, 1996.

C. Soutis and P. T. Curtis, A method for predicting the fracture toughness of CFRP laminates failing by fibre microbuckling, Composites Part A: Appied Science and Manufactering, vol.31, pp.733-773, 2000.

S. Metoui, Separated representations for the multiscale simulation of the mechanical behavior and damages of composite materials, Ecole Nationale Supérieure d'Arts et Métiers
URL : https://hal.archives-ouvertes.fr/tel-01311101

Z. Soumahoro, Etude du couplage thermomécanique dans la propagation dynamique de fissure, 2005.

J. H. Starnes, M. D. Rhodes, and J. G. Williams, Effect of impact damage and holes on the compressive strength of a graphite/epoxy laminate, Non-destructive evaluation and flaw criticality for composite materials, ASTM STP, vol.696, pp.145-171, 1979.

C. T. Sun and C. J. Jih, Quasi-static modeling of delamination crack propagation in laminates subjected to low-velocity impact, Composites Science and Technology, vol.54, pp.185-191, 1995.

C. T. Sun, An analytical method for evaluation of impact damage energy of laminated composites, Composite Materials: Testing and Design, pp.427-440, 1977.

G. I. Taylor and H. Quinney, The latent energy remaining in a metal after cold working, Proceedings of the Royal Society A : Mathematical, Physical and Engineering Sciences, vol.143, issue.849, pp.307-326, 1934.

E. Trousset, Prévision des dommages d'impact basse vitesse et basse énergie dans les composites à matrice organique stratifiés, p.68, 2013.

V. Tvergaard, Effect of fiber debonding in a whiskerreinforced metal, Material Science and Engineering A, vol.125, pp.203-213, 1990.

A. Tropis, M. Thomas, J. L. Bounie, and P. Lafon, Certification of composite outer wing of the ATR72, Proceeding of the Institution of Mechanical Engineers Part G, vol.209, pp.327-339, 1994.

T. Vandellos, Développement d'une stratégie de modélisation du délaminage dans les structures composites stratifiées, vol.1, 2011.

B. Vieille, V. M. Casado, and C. Bouvet, About the impact behavior of woven-ply carbon fiber-reinforced thermoplastic-and thermosetting-composites: A comparative study, Composite Structures, vol.101, pp.9-21, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00859872

W. Wang, M. Nakata, Y. Takao, and T. Matsubara, Experimental investigation on test methods for mode II interlaminar fracture testing of carbon fiber reinforced composites, Composites Part A : Applied Science and Manufacturing, vol.40, issue.9, pp.1447-1455, 2009.

B. Wattrisse, J. Muracciole, and A. Et-chrysochoos, , 2002.

, Thermomechanical effects accompanying the localized necking of semi-crystalline polymers, International Journal of Thermal Sciences, vol.41, issue.5, pp.422-427

R. Weichert and K. Schönert, On the temperature rise at the tip of a fast running crack ?, Journal of the Mechanics and Physics of Solids, vol.22, issue.2, pp.127-133, 1974.

R. Weichert and K. Schonert, Heat generation at the tip of a moving crack, J. Mech. Phys. Sol, vol.26, issue.3, pp.151-161, 1978.

J. Withcomb, Analysis of an instability-related growth of a through width delamination, 1984.

M. R. Woodward, R. Stoven, and . Damage-tolerance, , vol.21

. Composites, , 2001.

N. O. Yokoyama, M. V. Donadon, and S. F. De-almeida, A numerical study on the impact resistance of composite shells using an energy based failure model, Composite Structures, vol.93, pp.142-152, 2010.

R. Zaera, J. Rodríguez-martínez, and D. Rittel, On the taylorquinney coefficient in dynamically phase transforming materials. application to 304 stainless steel, International Journal of Plasticity, vol.40, issue.0, pp.185-201, 2013.

A. Zehnder, E. Babinsky, and T. Palmer, Hybrid method for determining the fraction of plastic work converted to heat, Exp. Mech, vol.38, issue.4, pp.295-302, 1998.