T. E. Tawil, J. F. Charpentier, and M. Benbouzid, Tidal energy site characterization for marine turbine optimal installation: Case of the ouessant island in france, Int. J. Marine Energy, 2017.

W. Batten, A. Bahaj, A. Molland, and J. Chaplin, The prediction of the hydrodynamic performance of marine current turbines, Renewable Energy, vol.33, issue.5, pp.1085-1096, 2008.

J. Ribrant and L. Bertling, Survey of failures in wind power systems with focus on swedish wind power plants during 1997 ndash, IEEE Trans. Energy Conversion, vol.22, issue.1, pp.167-173, 2005.

Z. Zhou, M. Benbouzid, J. Charpentier, F. Scuiller, and T. Tang, Developments in large marine current turbine technologies a review, Renewable Sustainable Energy Rev, vol.71, pp.852-858, 2017.

Z. Zhou, F. Scuiller, J. Charpentier, M. Benbouzid, and T. Tang, Power control of a nonpitchable pmsg-based marine current turbine at overrated current speed with flux-weakening strategy, IEEE J. Oceanic Eng, vol.40, issue.3, pp.536-545, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01213119

A. G. Jack, B. C. Mecrow, and J. A. Haylock, A comparative study of permanent magnet and switched reluctance motors for high-performance fault-tolerant applications, IEEE Trans. Ind. Appl, vol.32, issue.4, pp.889-895, 1996.

S. Djebarri, J. Charpentier, F. Scuiller, and M. Benbouzid, Design and performance analysis of double stator axial flux pm generator for rim driven marine current turbines, IEEE J. Oceanic Eng, vol.99, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01166435

T. Jahns, Improved reliability in solid-state ac drives by means of multiple independent phase drive units, IEEE Transactions on Industry Applications, vol.3, p.16, 1980.

R. Bojoi, A. Cavagnino, S. A. Odhano, A. Tenconi, and S. Vaschetto, Experimental fault assessment on multiphase pm generators with fractional-slot concentrated windings, IECON 2015-41st Annual Conference of the IEEE Industrial Electronics Society, pp.4941-004947, 2015.

B. Mecrow, A. Jack, J. Haylock, and J. Coles, Fault tolerant permanent magnet machine drives, IEE-Proc. Electr. Power Appl, vol.143, issue.6, pp.437-442, 1996.

F. Mekri, S. Ben-elghali, and M. Benbouzid, Fault-tolerant control performance comparison of three-and five-phase pmsg for marine current turbine applications, IEEE Trans. Sustainable Energy, vol.4, issue.2, pp.425-433, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00803242

O. Fall, N. K. Nguyen, J. F. Charpentier, P. Letellier, E. Semail et al., Variable speed control of a 5-phase permanent magnet synchronous generator including voltage and current limits in healthy and open-circuited modes, Electr. Power Syst. Res, vol.140, pp.507-516, 2016.

M. Parker, C. Ng, and L. Ran, Fault-tolerant control for a modular generator x2013;converter scheme for direct-drive wind turbines, IEEE Trans. Ind. Electron, vol.58, issue.1, pp.305-315, 2011.

X. Yuan, J. Chai, and Y. Li, A transformer-less high-power converter for large permanent magnet wind generator systems, IEEE Trans. Sustainable Energy, vol.3, issue.3, pp.318-329, 2012.

R. Lyra and T. A. Lipo, Torque density improvement in a six-phase induction motor with third harmonic current injection, IEEE Trans. Ind. Appl, vol.38, issue.5, pp.1351-1360, 2002.

M. Shamsi-nejad, B. Nahid-mobarakeh, S. Pierfederici, and F. Meibody-tabar, Fault tolerant and minimum loss control of double-star synchronous machines under open phase conditions, IEEE Trans. Ind. Electron, vol.55, issue.5, pp.1956-1965, 2008.

E. Klingshirn, High phase order induction motor, part i and ii, IEEE Trans. Power Apparatus Syst. PAS, vol.102, pp.47-59, 1983.

D. Vizireanu, X. Kestelyn, S. Brisset, P. Brochet, Y. Milet et al., Polyphased modular direct-drive wind turbine generator, Conference EPE, 2005.

F. Scuiller, J. Charpentier, and E. Semail, Multi-star multi-phase winding for a high power naval propulsion machine with low ripple torques and high fault tolerant ability, Vehicle Power and Propulsion Conference (VPPC), pp.1-5, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00819007

P. Zhu, Y. Liu, R. Robert, and X. Hao, Offshore wind converter reliability evaluation, Power Electronics and ECCE Asia (ICPE ECCE), pp.966-971, 2011.

H. Polinder, F. Van-der-pijl, G. De-vilder, and P. Tavner, Comparison of direct-drive and geared generator concepts for wind turbines, IEEE Trans. Energy Conversion, vol.21, issue.3, pp.725-733, 2006.

J. Aubry, H. Ahmed, and B. Multon, Sizing optimization methodology of a surface permanent magnet machine-converter system over a torque-speed operating profile: application to a wave energy converter, IEEE Trans. Ind. Electron, vol.59, issue.5, pp.2116-2125, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00612935

H. Li, Z. Chen, and H. Polinder, Optimization of multibrid permanent-magnet wind generator systems, IEEE Trans. Energy Conversion, vol.24, issue.1, pp.82-92, 2009.

H. Wang, M. Liserre, and F. Blaabjerg, Toward reliable power electronics: Challenges, design tools, and opportunities, IEEE Ind. Electron. Magazine, vol.7, issue.2, pp.17-26, 2013.

Y. Song and B. Wang, Survey on reliability of power electronic systems, IEEE Trans. Power Electron, vol.28, issue.1, pp.591-604, 2013.

M. Ikonen, Power cycling lifetime estimation of IGBT power modules based on chip temperature modeling, 2012.

P. Lezana, J. Pou, T. A. Meynard, J. Rodriguez, S. Ceballos et al., Survey on fault operation on multilevel inverters, IEEE Trans. Ind. Electron, vol.57, issue.7, pp.2207-2218, 2010.

A. M. Bazzi, A. Dominguez-garcia, and P. T. Krein, Markov reliability modeling for induction motor drives under field-oriented control, IEEE Trans. Power Electron, vol.27, issue.2, pp.534-546, 2012.

G. E. Murr, A. Griffo, J. Wang, Z. Q. Zhu, and B. Mecrow, Reliability assessment of fault tolerant permanent magnet ac drives, Industrial Electronics Society, IECON 2015-41st Annual Conference of the IEEE, pp.2777-002782, 2015.

M. Rausand and A. Hoyland, System Reliability Theory -Models, Statistical Methods and Applications, pp.978-0741471332, 2004.

C. Olmi, F. Scuiller, and J. F. Charpentier, Reliability assessment of an autonomous underwater vehicle propulsion by using electrical multi-phase drive, Industrial Electronics Society, IECON 2015-41st Annual Conference of the IEEE, pp.965-000970, 2015.

, Reliability methodology for electronics systems, 2010.

J. Mcpherson, Reliability Physics and Engineering -Time-to-Failure Modeling, 2013.

L. Gopireddy, L. M. Tolbert, and B. Ozpineci, Lifetime prediction of IGBT in a statcom using modified-graphical rainflow counting algorithm, IECON 2012-38th Annual Conference on IEEE Industrial Electronics Society, pp.3425-3430, 2012.

T. Kovaltchouk, J. Aubry, B. Multon, and H. B. Ahmed, Influence of IGBT current rating on the thermal cycling lifetime of a power electronic active rectifier in a direct wave energy converter, Power Electronics and Applications (EPE), 2013 15th European Conference on, pp.1-10, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00864070

A. Wintrich, U. Nicolai, W. Tursky, and T. Reimann, Application manual-power semiconductors

M. Ciappa, F. Carbognani, and W. Fichtner, Lifetime prediction and design of reliability tests for high-power devices in automotive applications, IEEE Trans. Device Mater. Reliability, vol.3, issue.4, pp.191-196, 2003.

A. Nieslony, Rainflow counting algorithm, 2010.

C. Olmi, International Journal of Marine Energy, vol.19, pp.319-331, 2017.

B. Backlund, R. Schnell, U. Schapbach, R. Fischer, and E. Tsyplaov, Applying IGBTs application note

. Semikron,

, Electronicon E63 DC capacitors with integrated safety mechanism

Z. Zhou, F. Scuiller, J. Charpentier, M. E. Hachemi-benbouzid, and T. Tang, Power smoothing control in a grid-connected marine current turbine system for compensating swell effect, IEEE Trans. Sustainable Energy, vol.4, issue.3, pp.816-826, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00874155

C. Olmi, International Journal of Marine Energy, vol.19, p.331, 2017.

F. Spinato, P. J. Tavner, G. J. Bussel, and E. Koutoulakos, Reliability of wind turbine subassemblies, IET Renewable Power Generation, vol.3, issue.4, pp.387-401, 2009.

J. Ribrant and L. M. Bertling, Survey of failures in wind power systems with focus on Swedish wind power plants during 1997-2005, IEEE Transactions on Energy Conversion, vol.22, issue.1, pp.167-173, 2007.

M. Ciappa, Lifetime modeling and prediction of power devices, IET, issue.9, pp.223-244, 2015.

H. Wang, Reliability of DC-link Capacitors in Power Electronic Converters, Reliability of Power Electronic Converter, pp.59-82, 2015.

C. Busca, Modeling lifetime of high power IGBTs in wind power applications -an overview, 2011 IEEE International Symposium on Industrial Electronics, pp.1408-1413, 2011.

C. J. Smith, C. J. Crabtree, and P. C. Matthews, Impact of wind conditions on thermal loading of PMSG wind turbine power converters, IET Power Electronics, vol.10, issue.11, pp.1268-1278, 2017.

K. Ma, M. Liserre, F. Blaabjerg, and T. Kerekes, Thermal loading and lifetime estimation for power device considering mission profiles in wind power converter, IEEE Transactions on Power Electronics, vol.30, issue.2, pp.590-602, 2015.

K. Ma, Z. Qin, and D. Zhou, Active thermal control for improved reliability of power electronics systems, Reliability of Power Electronic Converter Systems, pp.195-222, 2015.

I. Vernica, K. Ma, and F. Blaabjerg, Advanced derating strategy for extended lifetime of power electronics in wind power applications, 2016 IEEE 7th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), pp.1-8, 2016.

Y. Shen, H. Wang, and F. Blaabjerg, Reliability oriented design of a grid-connected photovoltaic microinverter, 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 -ECCE Asia), pp.81-86, 2017.

, sep) Reliability methodology for electronics systems. FIDES Group, 2010.

I. F. Kovacevic-badstuebner, J. W. Kolar, and U. Schilling, Modelling for the Lifetime Prediction of Power Semiconductor modules, Reliability of Power Electronic Converter Systems, pp.103-140, 2015.

K. Ma, H. Wang, and F. Blaabjerg, New approaches to reliability assessment: Using physics-of-failure for prediction and design in power electronics systems, IEEE Power Electronics Magazine, vol.3, issue.4, pp.28-41, 2016.

M. Rausand and A. Hoyland, System Reliability Theory -Models, Statistical Methods and Applications

A. Wintrich, U. Nicolai, W. Tursky, and T. Reimann, Application manual-power semiconductors. SEMIKRON International GmbH

M. Ciappa, F. Carbognani, and W. Fichtner, Lifetime prediction and design of reliability tests for high-power devices in automotive applications, IEEE Transactions on Device and Materials Reliability, vol.3, issue.4, pp.191-196, 2003.

, Power Film Capacitor Application Guide, Cornell Dubilier

, Type 947D Polypropylene High Energy Density DC Link Capacitors, Cornell Dubilier

B. Novakovic, Y. Duan, M. G. Solveson, A. Nasiri, and D. M. Ionel, From wind to the electric grid: Comprehensive modeling of wind turbine systems, IEEE Industry Applications Magazine, vol.22, issue.5, pp.73-84, 2016.

A. Nieslony, apr) Rainflow counting algorithm, 2010.

A. M. Hava, U. Ayhan, and V. V. Aban, A dc bus capacitor design method for various inverter applications, 2012 IEEE Energy Conversion Congress and Exposition (ECCE), pp.4592-4599, 2012.

. Cornell-dubilier, Life and temperature calculators

. Corpe-website,

. Vedecom-website,