, Third Wave Systems, 2016.

M. Ainsworth and J. Oden, A procedure for a posteriori error estimation for h-p finite element methods, Computer Methods in Applied Mechanics and Engineering, vol.101, pp.73-96, 1992.

M. Alves, J. Femandes, J. Rodrigues, and P. Martins, Finete element remeshing in matal forming using hexahedral element, Journal of Matérials Processing Technology, vol.141, pp.395-403, 2003.

M. Armendia, A. Garay, L. Iriarte, and P. Arrazola, Comparison of the machinabilities of Ti6Al4V and TIMETAL 54M using uncoated WC-Co tools, Journal of Materials Processing Technology, vol.210, pp.197-203, 2010.

H. Askes and A. Rodriguez-ferran, A combined rh-adaptive scheme based on domain subdivision. Formulation and linear examples, International Journal for Numerical Methods in Engineering, vol.51, issue.3, pp.253-273, 2001.

S. Atlati, B. Haddag, M. Nouari, and M. Zenasni, Analysis of a new Segmentation Intensity Ratio ''SIR'' to characterize the chip segmentation process in machining ductile metals, International Journal of Machine Tools & Manufacture, vol.51, issue.9, pp.687-700, 2011.

S. Atlati, B. Haddag, M. Nouari, and A. Moufki, Effect of the local friction and contact nature on the Built-Up Edge formation process in machining ductile metals, Tribology International, vol.90, pp.217-227, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01417920

Y. Ayed, l'usinage, Approches expérimentales et numériques de l'usinage assisté jet d'eau haute pression : étude des mécanismes d'usure et contribution à la modélisation multiphysiques de la coupe, 2013.

Y. Ayed, G. Germain, A. Ammar, and B. Furet, Thermo-mechanical characterization of the Ti17 titanium alloy under extreme loading conditions, The International Journal of Advanced Manufacturing Technology, vol.90, issue.5-8, pp.1593-1603, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01391021

I. Babu?ka and A. Miller, A feedback finite element method with a posteriori error estimation, part I the finite element method and some basic properties of the a posteriori error estimator, Computer method in applied Mechanics and Engineering, vol.61, pp.1-40, 1987.

I. Babu?ka and W. Rheinboldt, A-posteriori error estimates for the finite element method, International Journal for Numerical Methods in Engineering, vol.12, pp.1597-1615, 1978.

I. Babu?ka and W. Rheinboldt, Error Estimates for Adaptive Finite Element Computations, SIAM Journal on Numerical Analysis, vol.15, issue.4, pp.736-754, 1978.

I. Babu?ka, Validation of a posteriori error estimators by numerical approach, International Journal For Numerical Methods In Engineering, vol.37, pp.1073-1123, 1994.

I. Babu?ka and B. Szabó, On the rates of convergence of the finite element method, International Journal For Numerical Methods In Engineering, vol.18, pp.323-341, 1982.

F. Bach and M. Schäperkötter, 3D microstructural analysis of the chip formation during high speed cutting of C45E (AISI 1045), Zeitschrift fu?r MetallKunde, vol.95, issue.11, pp.1031-1039, 2004.

C. Badulescu, M. Grédiac, J. Mathias, and D. Roux, A procedure for accurate one-dimensional strain measurement using the grid method, Experimental Mechanics, vol.49, pp.841-854, 2009.

T. Baizeau, Développements expérimentaux et numériques pour la caractérisation des champs cinématiques de la coupe de l'acier 100 CrMo 7 durci pour la prédiction de l'intégrité de surface, 2017.

M. Baker, Finite element simulation of high-speed cutting forces, Journal of Materials Processing Technology, vol.176, issue.1-3, pp.117-126, 2006.

M. Barge, Etude expérimentale et numérique des mécanismes de coupe par abrasion, 2005.

F. Barros, S. Proenca, and C. De-barcellos, Generalized finite element method in structural nonlinear analysis ap-adaptive strategy, Computational Mechanics, vol.33, issue.2, pp.95-107, 2004.

D. Benson and S. Okazawa, Contact in a multi-material eulerian finite element formulation, Computer Methods in Applied Mechanics and Engineering, vol.193, pp.4277-4298, 2004.

A. Bérard, P. Hild, V. Cano, and S. Meunier, Transfert de champs entre maillages de type éléments finis et applications numériques en mécanique non linéaire des structures. 10e colloque national en calcul des structures, 2011.

C. Bonnet, F. Valiorgue, J. Rech, and H. Hamdi, Improvement of the numerical modeling in orthogonal dry cutting of an AISI 316L stainless steel by the introduction of a new friction model, CIRP Journal of Manufacturing Science and Technology, vol.1, pp.114-118, 2008.

G. Boothroyd and W. A. Knight, Fundamentals of Machining and Machine Tools, 2006.

M. Bornert, Assessment of Digital Image Correlation measurement errors: Methodology and results, Experimental Mechanics, Society for Experimental Mechanics, vol.49, pp.353-370, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00881043

B. Boroomand and O. Zienkiewicz, Recovery procedures in error estimation and adaptivity, 1999.

I. I. Part, Adaptivity in nonlinear problems of elasto-plasticity behaviour, Computer Methods in Applied Mechanics and Engineering, vol.176, issue.1-4, pp.127-146

N. Bourago and V. Kukudzhanov, A review of contact algorithms, Mechanics of Solids, vol.40, issue.1, pp.35-71, 2005.

R. Boussetta, Estimateurs d'erreur et ramaillage adaptatif : application à la simulation 3D, 2005.
URL : https://hal.archives-ouvertes.fr/pastel-00001210

R. Boussetta, T. Coupez, and L. Fourment, Adaptive remeshing based on a posteriori error estimation for forging simulation, Computer Methods in Applied Mechanics and Engineering, vol.195, pp.6626-6645, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00512775

R. Boussetta and L. Fourment, Study of various 3D element patches for a posteriori error estimation based on recovery techniques, International Conference on Adaptive Modeling and simulation. ADMOS 03, 2003.

R. Boussetta and L. Fourment, A posteriori error estimation and threedimensional adaptive remeshing : application to error control of nonsteady metal forming simulations, AIP Conference Proceedings, vol.712, pp.2246-2251, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00531233

T. Braham-bouchnak, Etude du comportement en sollicitation extrême et de l'usinabilité d'un nouvel alliage de titane aeronautique : le Ti555-3, thèse de doctorat: Arts et Métiers ParisTech, 2010.

D. Brancherie, Transfert de champs par approximation diffuse avec conservation de l'énergie, European Journal of Computational Mechanics, vol.15, issue.1-3, pp.107-118, 2006.

L. Bruno, Elastic characterization of orthotropic plates of any shape via static testing, International Journal of Solids and Structures, vol.45, pp.908-920, 2008.

J. Buda, New methods in the study of plastic deformation in the cutting zone, CIRP, vol.21, pp.17-18, 1972.

B. Bugat, Comportement et endommagement des aciers austéno-ferritiques vieillis : une approche micromécanique, 2000.

M. Calamaz, Approche expérimentale et numérique de l'usinage à sec de l'alliage aéronautique TA6V, 2008.

M. Calamaz, D. Coupard, M. Nouari, and F. Girot, Numerical analysis of chip formation and shear localisation processes in machining the Ti-6Al-4V titanium alloy, The International Journal of Advanced Manufacturing Technology, vol.52, pp.887-895, 2010.

G. Camacho and M. Ortiz, Adaptive Lagrangian modelling of ballistic penetration of metallic targets, Computer Methods in Applied Mechanics and Engineering, vol.142, pp.269-301, 1997.

W. Cao, W. , H. Russell, and R. , Comparison of two-dimensional r-adaptive finite element methods using various error indicators, Mathematics and Computers in Simulation, vol.56, pp.127-143, 2001.

W. Carroll and R. Barker, A theorem for optimum finite-element idealizations, International Journal of Solids and Structures, vol.9, pp.883-895, 1973.

C. Caruso and F. Quarta, Interpolation Methods Comparison. Computers & Mathematics with Applications, vol.35, issue.2, pp.109-126, 1998.

E. Ceretti and M. A. Lucchi, FEM simulation orthogonal cutting: serrated chip formation, Journal of Materials Processing Technology, vol.95, pp.17-26, 1999.

B. Changeux, Loi de comportement pour l'usinage. Localisation de la déformation et aspects microstructuraux, thèse de doctorat: Arts et Métiers ParisTech, 2001.

M. Chaudhri, Subsurface deformation patterns around indentation in work-hardened mild steel, Philosophical Magazine Letters, vol.67, pp.107-115, 1993.

M. Chérif, H. Thomas, B. Furet, and J. Hascoët, Generic modelling of milling forces for CAD/CAM applications, International Journal of Machine Tools and Manufacture, vol.44, issue.1, pp.29-37, 2003.

V. Chiaruttini, V. Riolo, and F. Feyel, Advanced remeshing techniques for complex 3D crack propagation, 13th International Conference on Fracture, 2013.

T. Childs, A new visio-plasticity technique and a study of curly chip formation, International Journal of Mechanical Sciences, vol.13, pp.375-387, 1971.

P. Coorevits and E. Bellenger, Alternative mesh optimality criteria for hadaptive finite element method. inite elements in analysis and desig, vol.40, pp.1195-1215, 2004.

P. Coorevits, P. Ladevèze, and J. P. Pelle, An automatic procedure with a control of accuracy for finite element analysis in 2D elasticity, Computer Methods in Applied Mechanics and Engineering, vol.121, pp.91-120, 1995.

R. Cordero, M. François, I. Lira, and C. Vial-edwards, Whole-field analysis of uniaxial tensile tests by Moiré interferometry, Optics and Lasers in Engineering, vol.43, issue.9, pp.919-936, 2005.

E. Cosola, K. Genovèse, L. Lamberti, and C. Pappalettere, A general framework for identification of hyper-elastic membranes with moiré techniques and multi-point simulated annealing, International Journal of Solids and Structures, vol.45, issue.24, pp.6074-6099, 2008.

S. Coudert, K. Triconnet, A. Zebiri, and Y. Surrel, Etalonnage transverse d'un objectif de camera par la méthode de grille. Albi, Colloque photomécanique: étude du comportement des matériaux et des structures, 2004.

T. Coudert, Reconstruction tridimensionnelle du volume intérieur d'une chaussure: évaluation du chaussant, 2005.

C. Courbon, Vers une modélisation physique de la coupe des aciers spéciaux : intégration du comportement métallurgique et des phénomènes tribologiques et thermiques aux interfaces, 2011.

A. Deb, J. Prevost, and B. Loret, Adaptive meshing for dynamic strain localization, Computer Methods in Applied Mechanics and Engineering, vol.137, pp.285-306, 1996.

. Deformtm, Scientific Forming Technologies Corporation, 2016.

P. Díez and A. Huerta, A unified approach to remeshing strategies for finite element h adaptivity, Computer Methods in Applied Mechanics and Engineering, vol.176, pp.215-229, 1999.

F. Doisneau, Eulerian versus Lagrangian simulation of unsteady two-way coupled coalescing two-phase flows in solid propellant combustion, Comptes Rendus Mécanique, vol.341, issue.1-2, pp.44-54, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00875654

F. Ducobu, Contribution à l'étude de la formation du copeau de Ti6Al4Ven coupe orthogonale-Approches numérique et expérimentale pour la compréhension des mécanismes de coupe macroscopique et microscopique, thèse de doctorat: Polytechnic Faculty of Mons, 2013.

D. Dufeu, Calcul d'erreur et adaptation de maillage en 3 dimensions, 1997.

D. Dureisseix and H. Bavestrello, Information transfer et ween incompatible finite element meshes: Application to coupled thermo-viscoelasticity, Computer Methods in Applied Mechanics and Engineering, vol.195, pp.6523-6541, 2006.

M. Dyduch, Adaptive methods in finite element simulations of metal forming processes, 1996.

H. Espinosa, P. Zavatierri, and G. Emore, Adaptive Fem projection on geometric and material nonlinearitics with application to brittle fracture, Mechanics of Materails, vol.29, pp.275-305, 1998.

N. Eu-gene and D. Aspinwall, Modelling of hard part machining, Journal of Materials Processing Technology, vol.127, issue.2, pp.222-229, 2002.

S. Feld-payet, Amorçage et propagation de fissures dans les milieux ductiles non locaux, 2010.

F. Fleissner, T. Gaugele, and P. Eberhard, Applications of the discrete element method in mechanical engineering, Multibody system dynamics, vol.18, pp.81-94, 2007.

E. Florentin, L. Gallimard, and J. P. Pelle, Evaluation of the local quality of stresses in 3D finite element enalysis, Computer Methods in Applied Mechanics and Engineering, vol.191, pp.4441-4457, 2002.

L. Fourment, Estimateurs d'erreur et maillage adaptatif pour la simulation numérique des procédés de mise en forme, 1992.

L. Gallimard, P. Ladevèze, and J. P. Pelle, Error estimation and adaptivity in elastoplasticity, International Journal For Numerical Methods In Engineering, vol.39, pp.189-217, 1996.
URL : https://hal.archives-ouvertes.fr/hal-01689591

L. Gallimard, P. Ladevèze, and J. P. Pelle, An enhenced error stimator on the constitutive relation for plasticity problems, Computers & Structures, vol.78, pp.801-810, 2000.

A. Gentel and H. Hoffmeiste, Chip formation in machining Ti6Al4V at extremely high cutting speeds, CIRP Ann Manuf Technol, vol.50, issue.1, pp.49-52, 2001.

G. Germain, Contribution à l'optimisation du procédé d'Usinage assisté laser, thèse de doctorat: Arts et Métiers ParisTech, 2006.

G. Germain, D. Coupard, and T. Braham-bouchnak, Approche expérimentale et numérique de la formation du copeau à l échelle méso, Journée « Modélisation expérimentale et numérique de la coupe», 2009.

S. Giani, D. Schötzau, and L. Zhu, An a-posteriori error estimate for -adaptive DG methods for convection-diffusion problems on anisotropically refined meshes, Computers & Mathematics with Applications, vol.67, issue.4, pp.869-887, 2014.

E. Gnanamanickam, S. Lee, J. Sullivan, and S. Chandrasekar, Direct measurement of largestrain deformation fields by particle tracking, Measurement Science and Technology, vol.20, issue.9, 2009.

F. Grytten, H. Daiyan, M. Polanco-loria, and S. Dumoulin, Use of digital image correlation to measure large-strain tensile properties of ductile bthermoplastics, Polymer Testing, vol.28, issue.6, pp.653-660, 2009.

H. Habak, Etude de l'influence de la microstructure et des paramètres de coupe sur le comportement, thèse de doctorat: Arts et Métiers ParisTech, 2006.

H. Hakula, N. Hyvönen, and T. Tuominen, On the adaptive solution of complete electrode model forward problems of electrical impedance tomography, Journal of Computational and Applied Mathematics, vol.236, issue.18, pp.4645-4659, 2012.

B. Halil, Simulation Of Orthogonal Metal Cutting By Finite Element Analysis, 2013.

M. Harzallah, Caractérisation in-situ et modélisation des mécanismes et couplages thermomécaniques en usinage -Application à l'alliage de titane Ti-6Al-4V, 2018.

M. Heinstein and D. Segalman, Simulation of Orthogonal Cutting with Smooth Particles Hydrodynamics, Sandia National Laboratories, 1997.

N. He, T. C. Lee, W. S. Lau, and S. Chan, Assessment of deformation of a shear localized chip in high speed machining, Journal of Materials Processing Technology, vol.129, pp.101-104, 2002.

F. Hild and S. Roux, Digital image correlation : Digital image correlation : from displacement measurement to identification of elastic properties -a review, Strain, vol.42, issue.2, pp.69-80, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00013816

A. Hillerborg, M. Modéer, and P. Petersson, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement and Concrete Research, vol.6, issue.6, pp.773-781, 1976.

J. Hua and R. Shivpuri, Prediction of chip morphology and segmentation during the machining of titanium alloys, Journal Mater Process Technol, vol.150, issue.1-2, pp.124-133, 2004.

J. Huang and J. Black, An evaluation of chip separation criteria for the FEM simulation of machining, Journal of Manufacturing Science and Engineering, vol.118, pp.545-554, 1996.

Y. Hu and M. Randolph, H-adaptive FE analysis of elasto-plastic non-homogeneous soil with large deformation, Computers and Geotechnics, vol.23, pp.61-83, 1998.

L. Illoul and P. Lorong, On some aspects of the CNEM implementation in 3D in order to simulate high speed machining or shearing, Computer and Structures, vol.89, pp.940-958, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01188918

M. Issa, C. Labergère, K. Saanouni, and A. Rassineux, Numerical prediction of thermomechanical field localization in orthogonal cutting, CIRP Journal of Manufacturing Science and Technology, pp.175-195, 2012.

R. Ivester, E. Whitenton, J. Heigel, T. Marusich, and C. Arthur, Mesuring chip segmentation by hight speeed microvideography and cpomparison to finite element modeling silumation, 10th International Conference (CIRP). Workshop on Modelling of Machining Operations, 2007.

S. Jaspers and J. Dautzenberg, Material behaviour in metal cutting: Strains, strain rates and temperatures in chip formation, Journal of Materials Processing Technology, vol.121, pp.123-135, 2002.

G. R. Johnson and W. H. Cook, Fracture characteristics of three metals subjected to various strains, temperatures and pressures, Engineering Fracture Mechanics, vol.21, issue.1, pp.31-48, 1985.

N. Khanna and K. Sangwan, Comparative machinability study on Ti54M titanium alloy in different heat treatment conditions, Journal of Engineering Manufacture, vol.227, issue.1, pp.96-101, 2012.

A. Khoei, S. Gharehbaghi, A. R. , T. Riahi, and A. , Error estimation, adaptivity and data transfer in enriched plasticity continua to analysis of shear band localization, Applied Mathematical Modelling, vol.31, pp.983-1000, 2007.

M. Kokaly, J. Le, and A. Kobayashi, Moiré interferometry for dynamic racture study, Optics and Lasers in Engineering, vol.40, issue.4, pp.231-247, 2003.

K. Komvopoulos and S. Erpenbeck, Finite element modeling of orthogonal metal cutting, 1991.

, ASME Journal of Engineering for Industry, vol.113, pp.253-267

S. Kumar, L. Fourment, and S. Guerdoux, Parallel, second-order and consistent remeshing transfer operators for evolving meshes with superconvergence property on surface and volume, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01143752

, Finite Elementsin Analysis and Design, vol.93, pp.70-84

P. Ladevèze, Comparaison de modèles de milieux continus, 1975.

P. Ladevèze, L. Chamoin, and É. Florentin, A new non-intrusive technique for the construction of admissible stress fields in model verification, Computer Methods in Applied Mechanics and Engineering, vol.199, pp.766-777, 2010.

P. Ladevèze and N. Moës, Adaptive control for finite element analysis in plasticity, 1999.

, Computers & Structures, vol.73, pp.45-60

P. Ladevèze and J. Pelle, Mastering calculations in linear and nonlinear mechanics, 2005.

P. Ladevèze, J. Pelle, and P. Rougeot, Error estimation and mesh optimization for classical finite elements. Engineering Computations, vol.8, pp.69-80, 1991.

P. Ladevèze and P. Rougeot, New advances on a posteriori error on constituve relation in finite element analysis, Computer Methods in Applied Mechanics and Engineering, vol.150, pp.239-249, 1997.

N. Lee and K. Bathe, Error indicatore and adaptive remeshing in large deformation finite element analysis. Finite Elements in Analysis and Design, vol.16, pp.99-139, 1994.

J. Lemaitre and J. Chaboche, Mecanique des matériaux solides, 1985.

J. Leopold, The Application of Visioplasticity in Predictive Modelling the Chip Flow, Tool loading and Surface Integrity in Turning Operations, 3th International Conference, 2000.

C. Leyens and M. Peters, Titanium and Titanium Alloys. Fundamentals and applications, p.9783527602117, 2005.

L. Li and N. He, A FEA study on mechanisms of saw-tooth chip deformation in high speed cutting of Ti-6-Al-4V alloy, 5th International Conference on High Speed Machining (HSM), pp.759-767, 2006.

J. Limido and C. Espinosa, Modelisation numerique de la coupe orthogonale en UGV, 2005.

, Colloque National MECAMAT -Mécanismes et mécanique du comportement, de la dégradation et de la rupture des matériaux sous sollicitations dynamiques

J. Limido, C. Espinosa, M. J. Salaün, and J. Lacome, SPH method applied to high speed cutting modelling, International Journal of Mechanical Sciences, vol.49, pp.898-908, 2007.

J. Limido, Metal cutting modelling SPH approach, International Journal of Machining and Machinability, vol.9, pp.177-196, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01852959

G. List, Wear behaviour of cemented carbide tools in dry machining of aluminium, Wear, pp.1177-1189, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00087294

G. List, Strain, strain rate and velocity fields determination at very high cutting speed, Journal of Materials Processing Technology, vol.213, pp.693-699, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01502115

T. Liszka, An interpolation method for an irregular net of nodes, International Journal for Numerical Methods in Engineering, vol.20, pp.1599-1612, 1984.

G. Lutjering and J. C. Williams, , 2003.

T. Mabrouki, F. Girardin, M. Asad, and J. Rigal, Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351), International Journal of Machine Tools & Manufacture, vol.48, issue.11, pp.1187-1197, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00383575

L. Machiels, Y. Maday, and A. Patera, A "flux-free" nodal Neumann subproblem approach to output bounds for partial differential equations, Comptes Rendus de l'Académie des SciencesSeries I -Mathematics, vol.330, issue.3, pp.249-254, 2000.

B. Maker, Z. Xinhai, B. N. Maker, and Z. Xinhai, Input Parameters Input Parameters for Metal Forming for Metal Forming Simulationtion using LS-DYNA, 2000.

P. Marin, Sur le contrôle des structures 2D et 3D élastiques incompressibles et quasiincompressibles, 1991.

T. Marusich and M. Ortiz, Modeling and simulation of high-speed machining, International Journal for Numerical Methods in Engineering, vol.38, pp.3675-3694, 1995.

J. Mathias, X. Balandraud, and M. Grédiac, Experimental investigation of composite patches with a full-field measurement method, Composites Part A. Applied Science and Manufacturing, vol.37, issue.2, pp.177-190, 2006.

J. Mediavilla, Continuous and discontinuous modelling of ductile fracture, 2005.

E. Merchant, Mechanics of the metal cutting process. I Orthogonal cutting, Journal of Applied Physics, vol.16, issue.5, pp.267-275, 1945.

E. Merchant, Mechanics of the metal cutting process. II Plasticity conditions, Journal of Applied Physics, vol.16, issue.6, pp.318-324, 1945.

M. Merklein and M. Biasutti, Forward and reverse simple shear test experiments for material modeling in forming simulations, Steel Research International, pp.702-707, 2011.

. Meshgems, , 2016.

M. Meyers, G. Subhash, B. Kad, and L. Prasad, Evolution of microstructure and shear-band formation in ?-hcp titanium, Mechanics of Materials, vol.17, issue.2-3, pp.175-193, 1994.

R. M. Miller, I. Mohammed, and P. S. Ho, Quantitative strain analysis of flip-chip electronic packages using phase-shifting moiré interferometry, Optics and Lasers in Engineering, vol.36, pp.127-139, 2001.

A. Molinari, R. Cheriguene, and H. Miguelez, Contact variables and thermal effects at the tool-chip interface in orthogonal cutting, International Journal of Solids and Structures, vol.49, issue.26, pp.20-7683, 2012.

R. Moulart, Développement et mise en oeuvre d'une méthode de mesure de champs de déformation à l'échelle micrométrique, thèse de doctorat: École Nationale Supérieure d'Arts et Métiers, 2007.

M. Nouari and H. Makich, Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys: Ti-6Al-4V and Ti-555, International Journal of Refractory Metals and Hard Materials, vol.41, pp.259-269, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01427459

T. Nguyen, Endommagement localisé dans les roches tendres -expérimentation par mesure de champs, 2011.

J. Oden, L. Demkowicz, W. Rachowicz, and T. Westermann, Toward a universal h-p adaptive finite-element strategy -2. A posteriori error estimation, Computer Methods in Applied Mechanics and Engineering, vol.77, issue.1-2, pp.113-180, 1989.

J. Orteu, Mesure 3D de formes et de déformations par stéréovision, Techniques de l'ingénieur, vol.7015, 2002.

M. Ortiz and J. Quigley, Adaptive mesh refinement in strain localization problems, Computer Methods in Applied Mechanics and Engineering, vol.90, issue.1-3, pp.781-804, 1991.

T. Ozel and E. Zeren, Finite Element Analysis of The Influence of Edge Roundness on The Stress and Temperature Fields Induced by High Speed Machining, International Journal of Advanced Manufacturing Technology, vol.35, pp.255-267, 2007.

B. Pan, K. Qian, H. Xie, and A. Asundi, Two-dimensional digital image correlation for inplane displacement and strain measurement : a review, Measurement Science and Technology, issue.6, p.20, 2009.

O. Pantalé, 2D and 3D numerical models of metal cutting with damage effects, 2004.

, Computer Methods in Applied Mechanics and Engineering, vol.193, pp.4383-4399

W. Pan, A new smoothed particle hydrodynamics non-Newtonian model for friction stir welding: Process modeling and simulation of microstructure evolution in a magnesium alloy, International Journal of Plasticity, vol.48, pp.189-204, 2013.

N. Pares, P. Díez, and A. Huerta, Subdomain-based flux-free a posteriori error estimators, Computer Methods in Applied Mechanics and Engineering, vol.195, pp.297-323, 2006.

V. Parks, Strain measurement using grids, Optical Engineering, vol.21, pp.633-639, 1982.

C. Pavanachand and R. Krishnakumar, Remeshing issues in the finite element analysis of metal forming problems, Journal of Materials Processing Technology, vol.75, pp.63-74, 1998.

D. Peric, C. Hochard, M. Dutko, and D. Owen, Transfer operators for evolving meshes in small strain elasto-plasticity, Computer Methods in Applied Mechanics and Engineering, vol.137, pp.331-334, 1996.

S. Philippe, Développement d'une formulation Arbitrairement lagrangienne eulérienne Pour la simulation tridimensionnelle du Laminage de produits plats, 2009.

D. Post, B. Han, and P. Ifju, High Sensitivity Moiré : Experimental analysis for mechanical and materials, 1994.

T. Pottier, Identification paramétrique par recalage de modèles éléments finis couplée à des mesures de champs cinématiques et thermiques, 2010.

T. Pottier, G. Germain, M. Calamaz, and A. Morel, Sub-Millimeter Measurement of Finite Strains at Cutting, Experimental Mechanics, vol.54, pp.1031-1042, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01022455

T. Pottier, Proposition of a modal filtering method to enhance heat source computation within heterogeneous thermomechanical problems, International Journal of Engineering Science, vol.81, pp.163-176, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00995121

G. Poulachon, A. L. Moisan, and M. Dessoly, Contribution à l'étude des mécanismes de coupe en tournage dur, Mécanique et Industrie, vol.3, pp.291-299, 2002.

J. Pujana, P. Arrazola, and J. Villar, In-process high-speed photography applied to orthogonal turning, Journal of Materials Processing Technology, vol.202, pp.475-485, 2008.

W. Rachowicz, J. Oden, and L. Demkowicz, Toward a universal h-p adaptive finite element strategy part 3. design of h-p meshes, Computer Methods in Applied Mechanics and Engineering, vol.77, issue.1-2, pp.181-212, 1989.

M. Ramesh, K. Seetharamu, N. Ganesan, and G. Kuppuswamy, Finite element modeling of heat transfer analysis in machining of isotropic materials, International Journal of Heat and Mass Transfer, vol.42, pp.1569-1583, 1999.

N. Ranc, Contribution à l'étude du comportement thermomécanique des matériaux solides et des structures, 2014.

P. Randles and L. Libersky, Smoothed particle hydrodynamics: Some recent improvements and applications, Computer methods in applied mechanics and engineering, vol.139, pp.375-408, 1998.

A. Rassineux, K. Saanouni, and C. Labergère, 2D/3D adaptative remeshing procedures dedicated to metal forming processes with damage, IV European Conference on Computational Mechanics: Solids, Structures and Coupled Problems in Engineering, 2010.

P. K. Rastogi, . London, and J. Raujol-veillé, Holographic interferometry -An important tool in nondestructive measurement and testing. Optical measurement techniques and applications, pp.111-150, 1997.

W. Ryu, Y. Kang, S. Baik, and S. Kang, A study on the 3-D measurement measurement by using digital projection moiré method, Optik -International Journal for Light and Electron Optics, vol.119, issue.10, pp.453-458, 2008.

G. Sekhon and J. Chenot, Numerical simulation of continuous chip formation during non steady-state orthogonal cutting, vol.10, pp.31-48, 1993.

R. H. Shivpuri and A. Shivastava, Microstructure mechanics interactions in modeling chip segmentation during titanium machining, International Conference (CIRP), vol.51, pp.71-74, 2002.

F. Sidoroff, Mécanique et thermodynamique des milieux continus, 1984.

M. Sjödahl, Some recent advances in electronic speckle photography, Optics and Lasers in Engineering, vol.29, issue.2-3, pp.125-144, 1998.

A. Srikanth and N. Zabaras, Shape optimization and preform design in metal forming processes, Computer Methods in Applied Mechanics and Engineering, vol.190, pp.1859-1901, 2000.

J. Strenkowski and J. Carroll, A finite element model of orthogonal metal cutting, ASME Journal of Engineering for Industry, vol.107, pp.346-354, 1985.

T. Strouboulis and K. Haque, Recent experiences with error estimation and adaptivity -2. Error estimation for h-adaptive approximations on grids of triangles and quadrilaterals, 1992.

, Computer Methods in Applied Mechanics and Engineering, vol.100, issue.3, pp.359-430

W. Sun and N. Zamani, An adaptive h-r boundary element algorithm for the Laplace equation, International Journal for Numerical Methods in Engineering, vol.33, issue.3, pp.537-552, 1992.

Y. Surrel, Les techniques optiques demesure de champ : essai de classification, 2004.

M. Instrumentation and . Métrologie, , vol.4, pp.11-42

M. Sutton, Application of an optimized digital correlation method to planar deformation analysis Image, Image and Vision Computing, vol.4, pp.143-150, 1986.

A. Tezuka and O. Okuda, An Adaptive Mesh Refinement for the Finite Element Method (Trial by the r-method), JSME International Journal, vol.31, issue.1, pp.50-55, 1988.

E. Trent and P. Wright, Metal cutting. 4 ème éd, 2000.

H. Tresca, On further application of the flow of solids, Proceedings of the Institution of Mechanical Engineers, vol.30, pp.301-345, 1878.

E. Uhlmann, M. Von-der-schulenburg, and R. Zettier, Finite element modeling and cutting simulation of inconel 718, International Conference (CIRP), vol.56, 2007.

D. Umbrello, 2007-a. On the effectiveness of finite element simulation of orthogonal cutting with particular reference to temperature prediction, Journal of Materials Processing Technology, vol.189, pp.284-291

D. Umbrello, L. Filice, S. Rizzuti, and F. Micari, On the evaluation of the global heat transfer coefficient in cutting, International Journal of Machine Tools & Manufacture, vol.47, pp.1738-1743, 2007.

P. Vacher, S. Dumoulin, F. Morestin, and S. Mguil-touchal, Bidimensional strain measurement using digital images, Proceedings of the Institution of Mechanical Engineers, vol.213, pp.811-817, 1999.

Y. Wang, M. Sutton, H. Bruck, and H. Schreier, Quantitative error assesment in pattern matching : Effects of intensity pattern noise interpolation, strain and image contrast on motion measurements, vol.45, pp.160-178, 2009.

Z. Wang, C. Sahay, and K. Rajurkar, tool temperature and crack development in milling cutters, International Journal of Machine Tools and Manufacture, vol.36, pp.129-140, 1996.

M. F. Wheeler and J. R. Whiteman, Superconvergent recovery of gradient on subdomains from piecewise linear finite-element approximations, Numerical Methods for Partial Differential Equations banner, vol.3, pp.357-374, 1987.

E. P. Whitenton, High-Speed Dual-Spectrum Imaging for the Measurement of Metal Cutting Temperatures, NIST Interagency/Internal, 2010.

J. Xie, A. Bayoumi, and H. Zbib, FEA modelling and simulation of shear localized chip formation in metal cutting, International Journal of Machine Tools and Manufacture, vol.38, pp.1067-1087, 1998.

M. Yaich, Y. Ayed, Y. Bouaziz, Z. Germai, and G. , Numerical analysis of constitutive coefficients effects on FE simulation of the 2D orthogonal cutting process: application to the Ti6Al4V, The International Journal of Advanced Manufacturing Technology, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01361858

I. Yamaguchi, Holography, speckle, and computers, Optics and Lasers in Engineering, vol.39, issue.4, pp.411-429, 2003.

X. Yang and C. Richard, A new stress-based model of friction behavior in machining and its significant impact on residual stresses computed by finite element method, International Journal of Mechanical Sciences, vol.44, pp.703-723, 2002.

A. Zahedi, Application of smooth-particle hydrodynamics in metal machining, Journal of Physics: Conference Series, vol.382, issue.1, p.12017, 2012.

C. Zener and J. H. Hollomon, Effect of strain rate upon plastic flow of steel, Journal Appl. Phys, vol.15, pp.22-32, 1944.

B. Zeramdini, C. Robert, G. Germain, and T. Pottier, Simulation of metal forming processes with a 3D adaptive remeshing procedure, AIP Conference Proceedings, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01313283

B. Zhang and A. Bagchi, Finite element formation of chip formation and comparison with machining experiment, ASME Journal of Engineering for Industry, vol.116, pp.289-297, 1994.

J. Zhang, A. Cherouat, and H. Borouchaki, FE Simulation of Metal orthogonal Cutting Processes Based on 3D Adaptive Remeshing Procedure, Advanced Materials Research, vol.409, pp.461-466, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01438461

Y. Zhang, T. Mabrouki, D. Nelias, and Y. Gong, Chip formation in orthogonal cutting considering interface limiting shear stress and damage evolution based on fracture energy approach, Finite Elements in Analysis and Design, vol.47, issue.7, pp.850-863, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00629449

O. Zienkiewicz, Y. Liu, and G. Huang, Error estimation and adaptivity in flow formulation for forming problems, International Journal For Numerical Methods In Engineering, vol.25, pp.23-42, 1988.

O. Zienkiewicz and R. Taylor, The finite element method. 4, tome I éd, 1987.

O. Zienkiewicz and J. Zhu, A simple error estimator and adaptive procedure for practical engineering analysis, International Journal for Numerical Methods in Engineering, vol.24, pp.337-357, 1987.

O. Zienkiewicz and J. Zhu, The superconvergent patch recovery and a posteriori error estimation. Part I : The recovery technique, International Journal for Numerical Methods in Engineering, vol.33, pp.1331-1364, 1992.

O. Zienkiewicz and J. Zhu, The superconvergent patch recovery and a posteriori error estimation. Part II : Error estimates and adaptivity, International Journal for Numerical Methods in Engineering, vol.33, pp.1365-1382, 1992.