J. W. Mcbain and D. G. Hopkins, On adhesives and adhesive action, Journal of Physical Chemistry, vol.29, issue.2, pp.188-204, 1925.

L. H. Sharpe and H. Schonhorn, Theory given direction to adhesion work: New theory is based on surface energetics, helps predict what constitutes a good adhesive, Chemical and engineering news, pp.67-68, 1963.

M. Coulaud, Rôle des interfaces et interphases dans les assemblages collés, 2007.

S. Voyutskii and V. Vakula, The role of diffusion phenomena in polymer to polymer adhesion, Journal of Applied Polymer Science, pp.475-491, 1963.

P. G. De-gennes, Polymers at an interface; a simplified view, Advances in Colloid and Interface Science, vol.27, issue.3, pp.189-209, 1987.

S. Buchan and W. D. Rae, Chemical Nature of the Rubber-To-Brass Bond, Rubber Chemistry and Technology, vol.19, issue.4, pp.968-986, 1946.

S. Teixeira-de-freitas, M. D. Banea, S. Budhe, and S. De-barros, Interface adhesion assessment of composite-to-metal bonded joints under salt spray conditions using peel tests, Composite Structures, vol.164, pp.68-75, 2017.

M. M. Wahab, I. A. Ashcroft, A. D. Crocombe, and S. J. Shaw, Diffusion of Moisture in Adhesively Bonded Joints, The Journal of Adhesion, vol.77, issue.1, pp.43-80, 2001.

R. G. Schmidt and J. P. Bell, Epoxy adhesion to metals, Epoxy Resins and Composites II, pp.33-71, 1986.

M. Peters, J. Hemptenmacher, J. Kumpfert, and C. Leyens, Structure and Properties of Titanium and Titanium Alloys, Titanium and Titanium Alloys, pp.1-36, 2005.

, NF EN 3813 -Série aérospatiale -Alliage de titane TI-P64001 (Ti-6Al-4V) -Recuit -Barre et fil pour éléments de fixations forgées -De < ou = à 50 mm, 2013.

J. M. Kropka, D. B. Adolf, S. Spangler, K. Austin, and R. S. Chambers, Mechanisms of degradation in adhesive joint strength: Glassy polymer thermoset bond in a humid environment, International Journal of Adhesion and Adhesives, vol.63, pp.14-25, 2015.

Y. Boutar, S. Naïmi, S. Mezlini, and M. B. Ali, Effect of surface treatment on the shear strength of aluminium adhesive single-lap joints for automotive applications, International Journal of Adhesion and Adhesives, vol.67, pp.38-43, 2016.

P. He, K. Chen, and J. Yang, Surface modifications of Ti alloy with tunable hierarchical structures and chemistry for improved metal-polymer interface used in deepwater composite riser, Applied Surface Science, vol.328, pp.614-622, 2015.

J. D. Venables, Adhesion and durability of metal-polymer bonds, J Mater Sci, vol.19, issue.8, pp.2431-2453, 1984.

T. Mertens and H. Kollek, On the stability and composition of oxide layers on pre-treated titanium, International Journal of Adhesion and Adhesives, vol.30, issue.6, pp.466-477, 2010.

G. W. Critchlow and D. M. Brewis, Review of surface pretreatments for titanium alloys, International Journal of Adhesion and Adhesives, vol.15, issue.3, pp.161-172, 1995.

T. Mertens, Investigation of surface pre-treatments for the structural bonding of titanium, International Journal of Adhesion and Adhesives, vol.34, pp.46-54, 2012.

M. Abel, A. N. Adams, A. J. Kinloch, S. J. Shaw, and J. F. Watts, The effects of surface pretreatment on the cyclic-fatigue characteristics of bonded aluminium-alloy joints, International Journal of Adhesion and Adhesives, vol.26, issue.1, pp.50-61, 2006.

S. Correia, V. Anes, and L. Reis, Effect of surface treatment on adhesively bonded aluminiumaluminium joints regarding aeronautical structures, Engineering Failure Analysis, vol.84, pp.34-45, 2018.

K. Leena, K. K. Athira, S. Bhuvaneswari, S. Suraj, and V. L. Rao, Effect of surface pretreatment on surface characteristics and adhesive bond strength of aluminium alloy, International Journal of Adhesion and Adhesives, vol.70, pp.265-270, 2016.

M. Marín-sánchez, A. Conde, M. García-rubio, A. Lavia, and I. García, Durability of titanium adhesive bonds with surface pretreatments based on alkaline anodisation, International Journal of Adhesion and Adhesives, vol.70, pp.225-233, 2016.

S. Zimmermann, Improved adhesion at titanium surfaces via laser-induced surface oxidation and roughening, Materials Science and Engineering: A, vol.558, pp.755-760, 2012.

A. Kurtovic, E. Brandl, T. Mertens, and H. J. Maier, Laser induced surface nano-structuring of Ti-6Al-4V for adhesive bonding, International Journal of Adhesion and Adhesives, vol.45, pp.112-117, 2013.

P. He, M. Huang, S. Fisher, C. Y. Yue, and J. Yang, Effects of primer and annealing treatments on the shear strength between anodized Ti6Al4V and epoxy, International Journal of Adhesion and Adhesives, vol.57, pp.49-56, 2015.

M. Aufray and A. Roche, Epoxy-amine/metal interphases: Influences from sharp needlelike crystal formation, International Journal of Adhesion and Adhesives, vol.27, issue.5, pp.387-393, 2007.

A. A. Roche, J. Bouchet, and S. Bentadjine, Formation of epoxy-diamine/metal interphases, International Journal of Adhesion and Adhesives, vol.22, issue.6, pp.431-441, 2002.

S. Bentadjine, R. Petiaud, A. A. Roche, and V. Massardier, Organo-metallic complex characterization formed when liquid epoxy-diamine mixtures are applied onto metallic substrates, Polymer, vol.42, issue.14, pp.6271-6282, 2001.

M. R. Tchoquessi-doidjo, Influence of silane-based treatment on adherence and wet durability of fusion bonded epoxy/steel joints, Progress in Organic Coatings, vol.76, issue.12, pp.1765-1772, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01364128

H. Yamasaki and S. Morita, Temperature dependence of isothermal curing reaction of epoxy resin studied by modulated differential scanning calorimetry and infrared spectroscopy, Journal of Molecular Structure, vol.1124, pp.249-255, 2016.

H. Wang, Y. Zhang, L. Zhu, Z. Du, B. Zhang et al., Curing behaviors and kinetics of epoxy resins with a series of biphenyl curing agents having different methylene units, Thermochimica Acta, vol.521, issue.1-2, pp.18-25, 2011.

C. I. Vallo, P. M. Frontini, and R. J. Williams, Elastic modulus and yield stress of epoxy networks in the glassy state, Polymer Gels and Networks, vol.1, issue.4, pp.257-266, 1993.

A. Tcharkhtchi, A. S. Lucas, J. P. Trotignon, and J. Verdu, Viscoelastic properties of epoxy networks in the glass transition region, Polymer, vol.39, issue.5, pp.1233-1235, 1998.

A. C. Grillet, J. Galy, J. Gérard, and J. Pascault, Mechanical and viscoelastic properties of epoxy networks cured with aromatic diamines, Polymer, vol.32, issue.10, pp.1885-1891, 1991.

H. Sue, P. M. Puckett, J. L. Bertram, and L. L. Walker, The network structure of epoxy systems and its relationship to toughness and toughenability, ACS Symposium Series, vol.759, pp.171-197, 2000.

D. P. Queiroz, F. Fraïsse, B. Fayolle, M. Kuntz, and J. Verdu, Radiochemical ageing of epoxy coating for nuclear plants, Radiation Physics and Chemistry, vol.79, issue.3, pp.362-364, 2010.

V. Bellenger, J. Decelle, and N. Huet, Ageing of a carbon epoxy composite for aeronautic applications, Composites Part B: Engineering, vol.36, issue.3, pp.189-194, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00300569

C. Galant, B. Fayolle, M. Kuntz, and J. Verdu, Thermal and radio-oxidation of epoxy coatings, Progress in Organic Coatings, vol.69, issue.4, pp.322-329, 2010.

Y. Zahra, Dégradation de réseaux époxy/amine en ambiance nucléaire, 2012.

S. Kocaman and G. Ahmetli, A study of coating properties of biobased modified epoxy resin with different hardeners, Progress in Organic Coatings, vol.97, pp.53-64, 2016.

S. Cukierman, J. Halary, and L. Monnerie, Molecular analysis of the viscoelastic properties of epoxy networks as deduced from the study of model systems, Journal of Non-Crystalline Solids, pp.898-905, 1991.

S. Bondzic, J. Hodgkin, J. Krstina, and J. Mardel, Chemistry of thermal ageing in aerospace epoxy composites, J. Appl. Polym. Sci, vol.100, issue.3, pp.2210-2219, 2006.

B. Dao, J. Hodgkin, J. Krstina, J. Mardel, and W. Tian, Accelerated aging versus realistic aging in aerospace composite materials. I. The chemistry of thermal aging in a low-temperature-cure epoxy composite, J. Appl. Polym. Sci, vol.102, issue.5, pp.4291-4303, 2006.

N. D. Danieley and E. R. Long, Effects of curing on the glass transition temperature and moisture absorption of a neat epoxy resin, Journal of Polymer Science: Polymer Chemistry Edition, vol.19, issue.10, pp.2443-2449, 1981.

V. Bellenger, J. Verdu, and M. E. , Effect of structure on glass transition temperature of amine crosslinked epoxies, Journal of Polymer Science Part B: Polymer Physics, vol.25, issue.6, pp.1219-1234, 2003.

J. Cognard, Some recent progress in adhesion technology and science, Comptes Rendus Chimie, vol.9, issue.1, pp.13-24, 2006.

A. C. Grillet, J. Galy, J. P. Pascault, and I. Bardin, Effects of the structure of the aromatic curing agent on the cure kinetics of epoxy networks, Polymer, vol.30, issue.11, pp.2094-2103, 1989.

E. Ernault, E. Richaud, and B. Fayolle, Thermal oxidation of epoxies: Influence of diamine hardener, Polymer Degradation and Stability, vol.134, pp.76-86, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01473986

V. Bellenger, E. Fontaine, A. Fleishmann, J. Saporito, and J. Verdu, Thermogravimetric study of amine cross-linked epoxies, Polymer Degradation and Stability, vol.9, issue.4, pp.195-208, 1984.

V. L. Zvetkov, Comparative DSC kinetics of the reaction of DGEBA with aromatic diamines. II. Isothermal kinetic study of the reaction of DGEBA with m-phenylene diamine, Polymer, vol.43, issue.4, pp.1069-1080, 2002.

J. D. Mccoy, Cure mechanisms of diglycidyl ether of bisphenol A (DGEBA) epoxy with diethanolamine, Polymer, vol.105, pp.243-254, 2016.

F. X. Perrin, T. M. Nguyen, and J. L. Vernet, Chemico-diffusion kinetics and TTT cure diagrams of DGEBA-DGEBF/amine resins cured with phenol catalysts, European Polymer Journal, vol.43, issue.12, pp.5107-5120, 2007.

N. Sbirrazzuoli, A. Mititelu-mija, L. Vincent, and C. Alzina, Isoconversional kinetic analysis of stoichiometric and off-stoichiometric epoxy-amine cures, Thermochimica Acta, vol.447, issue.2, pp.167-177, 2006.

B. Min, Z. H. Stachurski, and J. H. Hodgkin, Cure kinetics of elementary reactions of a diglycidyl ether of bisphenol A/diaminodiphenylsulfone epoxy resin: 2. Conversion versus time, Polymer, vol.34, issue.21, pp.4488-4495, 1993.

H. K. Hseih, C. C. Su, and E. M. Woo, Cure kinetics and inter-domain etherification in an amine-cured phenoxy/epoxy system, Polymer, vol.39, issue.11, pp.2175-2183, 1998.

C. C. Riccardi and R. J. Williams, Statistical structural model for the build-up of epoxyamine networks with simultaneous etherification, Polymer, vol.27, issue.6, pp.913-920, 1986.

C. L. Sherman, R. C. Zeigler, N. E. Verghese, and M. J. Marks, Structure-property relationships of controlled epoxy networks with quantified levels of excess epoxy etherification, Polymer, vol.49, issue.5, pp.1164-1172, 2008.

J. Mijovi?, J. Kenny, and L. Nicolais, Comparison of kinetic and rheological evaluation of gel time for an amine-epoxy system, Polymer, vol.34, issue.1, pp.207-209, 1993.

J. Galy, A. Sabra, and J. Pascault, Characterization of epoxy thermosetting systems by differential scanning calorimetry, Polymer Engineering & Science, vol.26, issue.21, pp.1514-1523, 1986.

T. Vidil, F. Tournilhac, S. Musso, A. Robisson, and L. Leibler, Control of reactions and network structures of epoxy thermosets, Progress in Polymer Science, vol.62, pp.126-179, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02135163

S. L. Simon and J. K. Gillham, Reaction kinetics and TTT cure diagrams for off stoichiometric ratios of a high Tg epoxy/amine system, Journal of Applied Polymer Science, vol.46, issue.7, pp.1245-1270, 2003.

G. A. Pogany, Gamma relaxation in epoxy resins and related polymers, Polymer, vol.11, issue.2, pp.66-78, 1970.

P. Musto, M. Abbate, G. Ragosta, and G. Scarinzi, A study by Raman, near-infrared and dynamic-mechanical spectroscopies on the curing behaviour, molecular structure and viscoelastic properties of epoxy/anhydride networks, Polymer, vol.48, issue.13, pp.3703-3716, 2007.

M. B. Mangion, M. Wang, and G. P. Johari, Relaxations in thermosets. XIII. Effects of post cure and aging on the sub Tg relaxations of nonstoichiometric epoxide based thermosets, Journal of Polymer Science Part B: Polymer Physics, vol.30, issue.5, pp.445-453, 1992.

D. Colombini, J. J. Martinez-vega, and G. Merle, Influence of hydrothermal ageing and thermal treatments on the viscoelastic behavior of DGEBA-MCDEA epoxy resin, Polymer Bulletin, vol.48, issue.1, pp.75-82, 2002.

M. Ochi, H. Iesako, and M. Shimbo, Mechanical relaxation mechanism of epoxide resins cured with diamines, Polymer, vol.26, issue.3, pp.457-461, 1985.

G. A. Pogany, The ? relaxation in epoxy resins, European Polymer Journal, vol.6, issue.2, pp.343-353, 1970.

J. P. Pascault and R. J. Williams, Relationships between glass transition temperature and conversion, Polymer Bulletin, vol.24, issue.1, pp.115-121, 1990.

E. A. Dimarzio, On the Second-Order Transition of a Rubber, Journal of research of the National Bureau of Standards-A: Physics and Chemistry, pp.611-617, 1964.

L. Heux, F. Lauprêtre, J. L. Halary, and L. Monnerie, Dynamic mechanical and 13C n.m.r. analyses of the effects of antiplasticization on the secondary relaxation of aryl-aliphatic epoxy resins, Polymer, vol.39, issue.6, pp.1269-1278, 1998.

R. Rahul and R. Kitey, Effect of cross-linking on dynamic mechanical and fracture behavior of epoxy variants, Composites Part B: Engineering, vol.85, pp.336-342, 2016.

V. Sauvant and J. L. Halary, Improvement of the performance of epoxy-amine thermosets by antiplasticizer-induced nano-scale phase separation during cure, Composites Science and Technology, vol.62, issue.4, pp.481-486, 2002.

B. Min, Z. H. Stachurski, J. H. Hodgkin, and G. R. Heath, Quantitative analysis of the cure reaction of DGEBA/DDS epoxy resins without and with thermoplastic polysulfone modifier using near infra-red spectroscopy, Polymer, vol.34, issue.17, pp.3620-3627, 1993.

J. Zhang and X. Xie, Influence of addition of silica particles on reaction-induced phase separation and properties of epoxy/PEI blends, Composites Part B: Engineering, vol.42, issue.8, pp.2163-2169, 2011.

L. Wang, Y. Tan, H. Wang, L. Gao, and C. Xiao, Investigation on fracture behavior and mechanisms of DGEBF toughened by CTBN, Chemical Physics Letters, vol.699, pp.14-21, 2018.

Q. Jin, J. M. Misasi, J. S. Wiggins, and S. E. Morgan, Simultaneous reinforcement and toughness improvement in an aromatic epoxy network with an aliphatic hyperbranched epoxy modifier, Polymer, vol.73, pp.174-182, 2015.

E. Espuche, J. Galy, J. Gérard, J. Pascault, and H. Sautereau, Influence of chain flexibility and crosslink density on mechanical properties of epoxy/amine networks, Polymer Engineering & Science, vol.31, issue.22, pp.1572-1580, 2004.

J. Bertho, Vieillissement hygrothermique d'un assemblage acier galvanisé/adhésif époxy : évolution de la tenue mécanique en fonction de l'état physico-chimique de l'adhésif, 2011.

J. Cognard, Use of the wedge test to estimate the lifetime of an adhesive joint in an aggressive environment, International Journal of Adhesion and Adhesives, vol.6, issue.4, pp.215-220, 1986.

J. Cognard, Influence of water on the cleavage of adhesive joints, International Journal of Adhesion and Adhesives, vol.8, issue.2, pp.93-99, 1988.

R. D. Adams, J. W. Cowap, G. Farquharson, G. M. Margary, and D. Vaughn, The relative merits of the Boeing wedge test and the double cantilever beam test for assessing the durability of adhesively bonded joints, with particular reference to the use of fracture mechanics, International Journal of Adhesion and Adhesives, vol.29, issue.6, pp.609-620, 2009.

M. Celina, K. T. Gillen, and R. A. Assink, Accelerated aging and lifetime prediction: Review of non-Arrhenius behaviour due to two competing processes, Polymer Degradation and Stability, vol.90, issue.3, pp.395-404, 2005.

K. T. Gillen, R. Bernstein, and M. Celina, Non-Arrhenius behavior for oxidative degradation of chlorosulfonated polyethylene materials, Polymer Degradation and Stability, vol.87, issue.2, pp.335-346, 2005.

S. Alessi, G. Pitarresi, and G. Spadaro, Effect of hydrothermal ageing on the thermal and delamination fracture behaviour of CFRP composites, Composites Part B: Engineering, vol.67, pp.145-153, 2014.

B. De&apos;nève and M. E. Shanahan, Water absorption by an epoxy resin and its effect on the mechanical properties and infra-red spectra, Polymer, vol.34, issue.24, pp.5099-5105, 1993.

T. S. Ellis and F. E. Karasz, Interaction of epoxy resins with water: the depression of glass transition temperature, Polymer, vol.25, issue.5, pp.664-669, 1984.

P. Moy and F. E. Karasz, Epoxy-water interactions -Moy -1980 -Polymer Engineering & Science -Wiley Online Library, Polymer Engineering and Science, 1980.

M. Jackson, M. Kaushik, S. Nazarenko, S. Ward, R. Maskell et al., Effect of free volume hole-size on fluid ingress of glassy epoxy networks, Polymer, vol.52, issue.20, pp.4528-4535, 2011.

B. Wang, Influence of physical aging and side group on the free volume of epoxy resins probed by positron, Polymer, vol.44, issue.14, pp.4047-4052, 2003.

Y. Zhang, R. D. Adams, and L. F. Da-silva, Absorption and glass transition temperature of adhesives exposed to water and toluene, International Journal of Adhesion and Adhesives, vol.50, pp.85-92, 2014.

K. Frank, Fluid uptake behavior of multifunctional epoxy blends, Polymer, vol.54, issue.1, pp.403-410, 2013.

C. Damian, M. Escoubes, and E. Espuche, Gas and water transport properties of epoxy-amine networks: Influence of crosslink density, J. Appl. Polym. Sci, vol.80, issue.11, pp.2058-2066, 2001.

C. Li and A. Strachan, Free volume evolution in the process of epoxy curing and its effect on mechanical properties, Polymer, vol.97, pp.456-464, 2016.

F. X. Perrin, M. H. Nguyen, and J. L. Vernet, Water transport in epoxy-aliphatic amine networks -Influence of curing cycles, European Polymer Journal, vol.45, issue.5, pp.1524-1534, 2009.

E. Morel, V. Bellenger, and J. Verdu, Structure-water absorption relationships for amine-cured epoxy resins, Polymer, vol.26, issue.11, pp.1719-1724, 1985.

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy, Polymer, vol.40, issue.20, pp.5505-5512, 1999.

V. Bellenger, E. Morel, and J. Verdu, Solubility parameters of amine-crosslinked aromatic epoxies, J. Appl. Polym. Sci, vol.37, issue.9, pp.2563-2576, 1989.

C. L. Soles, F. T. Chang, B. A. Bolan, H. A. Hristov, D. W. Gidley et al., Contributions of the nanovoid structure to the moisture absorption properties of epoxy resins, Journal of Polymer Science, Part B: Polymer Physics, vol.36, issue.17, pp.3035-3048, 1998.

I. Merdas, F. Thominette, A. Tcharkhtchi, and J. Verdu, Factors governing water absorption by composite matrices, Composites Science and Technology, vol.62, issue.4, pp.487-492, 2002.

J. E. Yagoubi, G. Lubineau, F. Roger, and J. Verdu, A fully coupled diffusion-reaction scheme for moisture sorption-desorption in an anhydride-cured epoxy resin, Polymer, vol.53, issue.24, pp.5582-5595, 2012.

L. Li, Y. Yu, Q. Wu, G. Zhan, and S. Li, Effect of chemical structure on the water sorption of amine-cured epoxy resins, Corrosion Science, vol.12, issue.51, pp.3000-3006, 2009.

S. Cotugno, D. Larobina, G. Mensitieri, P. Musto, and G. Ragosta, A novel spectroscopic approach to investigate transport processes in polymers: the case of water-epoxy system, Polymer, vol.42, issue.15, pp.6431-6438, 2001.

G. Mensitieri, M. Lavorgna, P. Musto, and G. Ragosta, Water transport in densely crosslinked networks: A comparison between epoxy systems having different interactive characters, Polymer, vol.47, issue.25, pp.8326-8336, 2006.

S. Popineau, C. Rondeau-mouro, C. Sulpice-gaillet, and M. E. Shanahan, Free/bound water absorption in an epoxy adhesive, Polymer, vol.46, issue.24, pp.10733-10740, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00157171

A. Tcharkhtchi, P. Y. Bronnec, and J. Verdu, Water absorption characteristics of diglycidylether of butane diol-3,5-diethyl-2,4-diaminotoluene networks, Polymer, vol.41, issue.15, pp.5777-5785, 2000.

P. Y. Le-gac, G. Roux, P. Davies, B. Fayolle, and J. Verdu, Water clustering in polychloroprene, Polymer, vol.55, issue.12, pp.2861-2866, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01058318

M. Broudin, Water diffusivity in PA66: Experimental characterization and modeling based on free volume theory, European Polymer Journal, vol.67, pp.326-334, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01286051

B. H. Zimm and J. L. Lundberg, Sorption of Vapors by High Polymers, J. Phys. Chem, vol.60, issue.4, pp.425-428, 1956.

E. Gaudichet-maurin, Caractérisation et vieillissement d'une membrane d, 2005.

L. Masaro and X. X. Zhu, Physical models of diffusion for polymer solutions, gels and solids, Progress in Polymer Science, vol.24, issue.5, pp.731-775, 1999.

J. Crank, The Mathematics of Diffusion, 1975.

C. Shen and G. S. Springer, Moisture Absorption and Desorption of Composite Materials, Journal of Composite Materials, vol.10, issue.1, pp.2-20, 1976.

P. Moy and F. E. Karasz, Epoxy-water interactions, Polymer Engineering & Science, vol.20, issue.4, pp.315-319, 1980.

D. M. Brewis, J. Comyn, and J. L. Tegg, The durability of some epoxide adhesive-bonded joints on exposure to moist warm air, International Journal of Adhesion and Adhesives, vol.1, issue.1, pp.35-39, 1980.

Y. Joliff, L. Belec, and J. F. Chailan, Modified water diffusion kinetics in an unidirectional glass/fibre composite due to the interphase area: Experimental, analytical and numerical approach, Composite Structures, vol.97, pp.296-303, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01364146

N. Coniglio, K. Nguyen, R. Kurji, and E. Gamboa, Characterizing water sorption in 100% solids epoxy coatings, Progress in Organic Coatings, vol.76, issue.9, pp.1168-1177, 2013.

S. G. Prolongo, M. R. Gude, and A. Ureña, Water uptake of epoxy composites reinforced with carbon nanofillers, Composites Part A: Applied Science and Manufacturing, vol.43, issue.12, pp.2169-2175, 2012.

B. Fayolle and J. Verdu, Vieillissement physique des matériaux polymères, 2005.

G. Pitarresi, M. Scafidi, S. Alessi, M. D. Filippo, C. Billaud et al., Absorption kinetics and swelling stresses in hydrothermally aged epoxies investigated by photoelastic image analysis, Polymer Degradation and Stability, vol.111, pp.55-63, 2015.

G. Z. Xiao and M. E. Shanahan, Swelling of DGEBA/DDA epoxy resin during hygrothermal ageing, Polymer, vol.39, issue.14, pp.3253-3260, 1998.

A. Toscano, G. Pitarresi, M. Scafidi, M. D. Filippo, G. Spadaro et al., Water diffusion and swelling stresses in highly crosslinked epoxy matrices, Polymer Degradation and Stability, vol.133, pp.255-263, 2016.

R. Brethous, X. Colin, B. Fayolle, and M. Gervais, Non-Fickian behavior of water absorption in an epoxy-amidoamine network, AIP Conference Proceedings, vol.1736, issue.1, p.20070, 2016.

P. Nogueira, Effect of water sorption on the structure and mechanical properties of an epoxy resin system, J. Appl. Polym. Sci, vol.80, issue.1, pp.71-80, 2001.

M. R. Vanlandingham, R. F. Eduljee, and J. W. Gillespie, Moisture diffusion in epoxy systems, J. Appl. Polym. Sci, vol.71, issue.5, pp.787-798, 1999.

G. Camino, A. Y. Polishchuk, M. P. Luda, M. Revellino, R. Blancon et al., Water ageing of SMC composite materials: a tool for material characterisation, Polymer Degradation and Stability, vol.61, issue.1, pp.53-63, 1998.

V. O. Startsev, M. P. Lebedev, K. A. Khrulev, M. V. Molokov, A. S. Frolov et al., Effect of outdoor exposure on the moisture diffusion and mechanical properties of epoxy polymers, Polymer Testing, vol.65, pp.281-296, 2018.

M. P. Zanni-deffarges and M. E. Shanahan, Diffusion of water into an epoxy adhesive: comparison between bulk behaviour and adhesive joints, International Journal of Adhesion and Adhesives, vol.15, issue.3, pp.137-142, 1995.

S. Popineau and M. E. Shanahan, Simple model to estimate adhesion of structural bonding during humid ageing, International Journal of Adhesion and Adhesives, vol.26, issue.5, pp.363-370, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00142201

N. Brack and A. N. Rider, The influence of mechanical and chemical treatments on the environmental resistance of epoxy adhesive bonds to titanium, International Journal of Adhesion and Adhesives, vol.48, pp.20-27, 2014.

J. Cognard, Science et technologie du collage. PPUR presses polytechniques, 2000.

K. Wapner, M. Stratmann, and G. Grundmeier, In situ infrared spectroscopic and scanning Kelvin probe measurements of water and ion transport at polymer/metal interfaces, Electrochimica Acta, vol.51, issue.16, pp.3303-3315, 2006.

S. Kim, J. A. Dura, K. A. Page, and C. L. Soles, Interfacial morphology and water transport of proton-conducting polymer membranes in fuel cell, Advanced Materials, vol.46, 2013.

C. D. Liljedahl, A. D. Crocombe, F. E. Gauntlett, M. S. Rihawy, and A. S. Clough, Characterising moisture ingress in adhesively bonded joints using nuclear reaction analysis, International Journal of Adhesion and Adhesives, vol.29, issue.4, pp.356-360, 2009.

I. Linossier, F. Gaillard, M. Romand, and T. Nguyen, A Spectroscopic Technique for Studies of Water Transport Along the Interface and Hydrolytic Stability of Polymer/Substrate Systems, The Journal of Adhesion, vol.70, issue.3-4, pp.221-239, 1999.

V. Bellenger, C. Bouchard, P. Claveirolle, and J. Verdu, Photo-oxidation of epoxy resins cured by non-aromatic amines, Polymer Photochemistry, vol.1, issue.1, pp.69-80, 1981.

P. Musto, M. Abbate, M. Pannico, G. Scarinzi, and G. Ragosta, Improving the photo-oxidative stability of epoxy resins by use of functional POSS additives: A spectroscopic, mechanical and morphological study, Polymer, vol.53, issue.22, pp.5016-5036, 2012.

A. Rivaton, L. Moreau, and J. Gardette, Photo-oxidation of phenoxy resins at long and short wavelengths-I. Identification of the photoproducts, Polymer Degradation and Stability, vol.58, issue.3, pp.321-332, 1997.

N. Longiéras, M. Sebban, P. Palmas, A. Rivaton, and J. L. Gardette, Degradation of epoxy resins under high energy electron beam irradiation: Radio-oxidation, Polymer Degradation and Stability, vol.92, issue.12, pp.2190-2197, 2007.

T. Devanne, A. Bry, L. Audouin, and J. Verdu, Radiochemical ageing of an amine cured epoxy network. Part I: change of physical properties, Polymer, vol.46, issue.1, pp.229-236, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00110957

X. Buch and M. E. Shanahan, Thermal and thermo-oxidative ageing of an epoxy adhesive, Polymer Degradation and Stability, vol.68, issue.3, pp.403-411, 2000.

E. Ernault, Thermo-oxydation de résines époxy/amine, 2016.

A. Simar, M. Gigliotti, J. C. Grandidier, and I. Ammar-khodja, Evidence of thermo-oxidation phenomena occurring during hygrothermal aging of thermosetting resins for RTM composite applications, Composites Part A: Applied Science and Manufacturing, vol.66, pp.175-182, 2014.

M. Minervino, M. Gigliotti, M. C. Lafarie-frenot, and J. C. Grandidier, The effect of thermooxidation on the mechanical behaviour of polymer epoxy materials, Polymer Testing, vol.32, issue.6, pp.1020-1028, 2013.

M. Gigliotti, M. Minervino, M. C. Lafarie-frenot, and J. C. Grandidier, Effect of Thermooxidation on the local mechanical behaviour of epoxy polymer materials for high temperature applications, Mechanics of Materials, vol.101, pp.118-135, 2016.

M. Pecora, Y. Pannier, M. Lafarie-frenot, M. Gigliotti, and C. Guigon, Effect of thermooxidation on the failure properties of an epoxy resin, Polymer Testing, vol.52, pp.209-217, 2016.

B. J. Anderson, Thermal stability of high temperature epoxy adhesives by thermogravimetric and adhesive strength measurements, Polymer Degradation and Stability, vol.96, issue.10, pp.1874-1881, 2011.

X. Colin, A. Mavel, C. Marais, and J. Verdu, Interaction between Cracking and Oxidation in Organic Matrix Composites, Journal of Composite Materials, vol.39, issue.15, pp.1371-1389, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00110949

J. L. Bolland and G. Gee, Kinetic studies in the chemistry of rubber and related materials. II. The kinetics of oxidation of unconjugated olefins, Trans. Faraday Soc, vol.42, issue.0, pp.236-243, 1946.

A. V. Tobolsky, Oxidative degradation of polymeric material, Discuss. Faraday Soc, vol.2, issue.0, pp.384-388, 1947.

L. Audouin, V. Gueguen, A. Tcharkhtchi, and J. Verdu, Close loop' mechanistic schemes for hydrocarbon polymer oxidation, J. Polym. Sci. A Polym. Chem, vol.33, issue.6, pp.921-927, 1995.

X. Colin, B. Fayolle, L. Audouin, and J. Verdu, About a quasi-universal character of unstabilised polyethylene thermal oxidation kinetics, Polymer Degradation and Stability, vol.80, issue.1, pp.67-74, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00113813

M. Coquillat, J. Verdu, X. Colin, L. Audouin, and R. Nevière, Thermal oxidation of polybutadiene. Part 2: Mechanistic and kinetic schemes for additive-free non-crosslinked polybutadiene, Polymer Degradation and Stability, vol.92, issue.7, pp.1334-1342, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00199759

S. Korcek, J. H. Chenier, J. A. Howard, and K. U. Ingold, Absolute Rate Constants for Hydrocarbon Autoxidation. XXI. Activation Energies for Propagation and the Correlation of Propagation Rate Constants with Carbon-Hydrogen Bond Strengths, 100 Years of CSC in the Pages of CJC, vol.01, pp.2285-2297, 2011.

E. Richaud, Durabilité des Géotextiles en Polypropylène, phdthesis, Arts et Métiers ParisTech, 2006.

G. A. Russell, Deuterium-isotope Effects in the Autoxidation of Aralkyl Hydrocarbons. Mechanism of the Interaction of PEroxy Radicals1, J. Am. Chem. Soc, vol.79, issue.14, pp.3871-3877, 1957.

J. A. Howard and K. U. Ingold, Self-reaction of sec-butylperoxy radicals. Confirmation of the Russell mechanism, J. Am. Chem. Soc, vol.90, issue.4, pp.1056-1058, 1968.

J. L. Henry, A. L. Ruaya, and A. Garton, The kinetics of polyolefin oxidation in aqueous media, Journal of Polymer Science Part A: Polymer Chemistry, vol.30, issue.8, pp.1693-1703, 1992.

. Références,

H. Stutz, Lifetime assessment of epoxies by the kinetics of thermal degradation, J. Appl. Polym. Sci, vol.91, issue.3, pp.1881-1886, 2004.

S. Bondzic, J. Hodgkin, J. Krstina, and J. Mardel, Chemistry of thermal ageing in aerospace epoxy composites, J. Appl. Polym. Sci, vol.100, issue.3, pp.2210-2219, 2006.

B. De-nève and M. E. Shanahan, Effects of humidity on an epoxy adhesive, International Journal of Adhesion and Adhesives, vol.12, issue.3, pp.191-196, 1992.

J. Cognard, Influence of water on the cleavage of adhesive joints, International Journal of Adhesion and Adhesives, vol.8, issue.2, pp.93-99, 1988.

S. Popineau and M. E. Shanahan, Simple model to estimate adhesion of structural bonding during humid ageing, International Journal of Adhesion and Adhesives, vol.26, issue.5, pp.363-370, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00142201

N. Brack and A. N. Rider, The influence of mechanical and chemical treatments on the environmental resistance of epoxy adhesive bonds to titanium, International Journal of Adhesion and Adhesives, vol.48, pp.20-27, 2014.

P. He, M. Huang, S. Fisher, C. Y. Yue, and J. Yang, Effects of primer and annealing treatments on the shear strength between anodized Ti6Al4V and epoxy, International Journal of Adhesion and Adhesives, vol.57, pp.49-56, 2015.

B. Dao, J. Hodgkin, J. Krstina, J. Mardel, and W. Tian, Accelerated aging versus realistic aging in aerospace composite materials. I. The chemistry of thermal aging in a low-temperature-cure epoxy composite, J. Appl. Polym. Sci, vol.102, issue.5, pp.4291-4303, 2006.

E. Ernault, E. Richaud, and B. Fayolle, Thermal oxidation of epoxies: Influence of diamine hardener, Polymer Degradation and Stability, vol.134, pp.76-86, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01473986

Y. Zahra, F. Djouani, B. Fayolle, M. Kuntz, and J. Verdu, Thermo-oxidative aging of epoxy coating systems, Progress in Organic Coatings, vol.77, issue.2, pp.380-387, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00980633

S. Terekhina, M. Mille, B. Fayolle, and X. Colin, Oxidation induced changes in viscoelastic properties of a thermostable epoxy matrix, Polym. Sci. Ser. A, vol.55, issue.10, pp.614-624, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01001693

M. Celina, J. Wise, D. K. Ottesen, K. T. Gillen, and R. L. Clough, Oxidation profiles of thermally aged nitrile rubber, Polymer Degradation and Stability, vol.60, issue.2, pp.493-504, 1998.

, EN2243-5: Test methods for structural adhesives. Ageing tests, 1992.

, EN 2823 -Aerospace series. Fibre reinforced plastics. Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics, 1992.

M. C. Celina, Review of polymer oxidation and its relationship with materials performance and lifetime prediction, Polymer Degradation and Stability, vol.98, issue.12, pp.2419-2429, 2013.

A. Simar, M. Gigliotti, J. C. Grandidier, and I. Ammar-khodja, Evidence of thermo-oxidation phenomena occurring during hygrothermal aging of thermosetting resins for RTM composite applications, Composites Part A: Applied Science and Manufacturing, vol.66, pp.175-182, 2014.

C. Damian, E. Espuche, and M. Escoubes, Influence of three ageing types (thermal oxidation, radiochemical and hydrolytic ageing) on the structure and gas transport properties of epoxyamine networks, Polymer Degradation and Stability, vol.72, issue.3, pp.447-458, 2001.

M. Celina, J. Wise, D. K. Ottesen, K. T. Gillen, and R. L. Clough, Correlation of chemical and mechanical property changes during oxidative degradation of neoprene, Polymer Degradation and Stability, vol.68, issue.2, pp.171-184, 2000.

M. Minervino, M. Gigliotti, M. C. Lafarie-frenot, and J. C. Grandidier, The effect of thermooxidation on the mechanical behaviour of polymer epoxy materials, Polymer Testing, vol.32, issue.6, pp.1020-1028, 2013.

M. Pecora, Y. Pannier, M. Lafarie-frenot, M. Gigliotti, and C. Guigon, Effect of thermooxidation on the failure properties of an epoxy resin, Polymer Testing, vol.52, pp.209-217, 2016.

L. Li, Y. Yu, Q. Wu, G. Zhan, and S. Li, Effect of chemical structure on the water sorption of amine-cured epoxy resins, Corrosion Science, vol.12, issue.51, pp.3000-3006, 2009.

P. Moy and F. E. Karasz, Epoxy-water interactions -Moy -1980 -Polymer Engineering & Science -Wiley Online Library, Polymer Engineering and Science, 1980.

C. Shen and G. S. Springer, Moisture Absorption and Desorption of Composite Materials, Journal of Composite Materials, vol.10, issue.1, pp.2-20, 1976.

P. Gijsman, W. Dong, A. Quintana, and M. Celina, Influence of temperature and stabilization on oxygen diffusion limited oxidation profiles of polyamide 6, Polymer Degradation and Stability, vol.130, pp.83-96, 2016.

N. Longiéras, M. Sebban, P. Palmas, A. Rivaton, and J. L. Gardette, Degradation of epoxy resins under high energy electron beam irradiation: Radio-oxidation, Polymer Degradation and Stability, vol.92, issue.12, pp.2190-2197, 2007.

C. Galant, B. Fayolle, M. Kuntz, and J. Verdu, Thermal and radio-oxidation of epoxy coatings, Progress in Organic Coatings, vol.69, issue.4, pp.322-329, 2010.

M. Bordes, P. Davies, J. Cognard, L. Sohier, V. Sauvant-moynot et al., Prediction of long term strength of adhesively bonded steel/epoxy joints in sea water, International Journal of Adhesion and Adhesives, vol.29, issue.6, pp.595-608, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00392148

M. Broudin, Moisture sorption in polyamide 6.6: Experimental investigation and comparison to four physical-based models, Polymer Testing, vol.43, pp.10-20, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01126640

I. Merdas, F. Thominette, A. Tcharkhtchi, and J. Verdu, Factors governing water absorption by composite matrices, Composites Science and Technology, vol.62, issue.4, pp.487-492, 2002.

A. Tcharkhtchi, P. Y. Bronnec, and J. Verdu, Water absorption characteristics of diglycidylether of butane diol-3,5-diethyl-2,4-diaminotoluene networks, Polymer, vol.41, issue.15, pp.5777-5785, 2000.

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy, Polymer, vol.40, issue.20, pp.5505-5512, 1999.

E. Richaud, F. Farcas, P. Bartoloméo, B. Fayolle, L. Audouin et al., Effect of oxygen pressure on the oxidation kinetics of unstabilised polypropylene, Polymer Degradation and Stability, vol.91, issue.2, pp.398-405, 2006.

E. Richaud, O. Diogo, B. Fayolle, J. Verdu, J. Guilment et al., Review: Auto-oxidation of aliphatic polyamides, Polymer Degradation and Stability, vol.98, issue.9, pp.1929-1939, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00992028

M. Celina and G. A. George, Heterogeneous and homogeneous kinetic analyses of the thermal oxidation of polypropylene, Polymer Degradation and Stability, vol.50, issue.1, pp.89-99, 1995.

S. Verdu and J. Verdu, A New Kinetic Model for Polypropylene Thermal Oxidation at Moderate Temperatures, Macromolecules, vol.30, issue.8, p.151, 1997.

E. Richaud, B. Fayolle, J. Verdu, and J. Rychlý, Co-oxidation kinetic model for the thermal oxidation of polyethylene-unsaturated substrate systems, Polymer Degradation and Stability, vol.98, issue.5, pp.1081-1088, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00996704

T. Kamon and H. Furukawa, Curing mechanisms and mechanical properties of cured epoxy resins, Epoxy Resins and Composites IV, pp.173-202, 1986.

E. Ernault, E. Richaud, and B. Fayolle, Origin of epoxies embrittlement during oxidative ageing, Polymer Testing, vol.63, pp.448-454, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01593556

M. C. Lafarie-frenot, S. Rouquié, N. Q. Ho, and V. Bellenger, Comparison of damage development in C/epoxy laminates during isothermal ageing or thermal cycling, Composites Part A: Applied Science and Manufacturing, vol.37, issue.4, pp.662-671, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00118281

L. Audouin, V. Langlois, J. Verdu, and J. C. De-bruijn, Role of oxygen diffusion in polymer ageing: kinetic and mechanical aspects, Journal of Materials Science, vol.29, issue.3, pp.569-583, 1994.

X. Colin, A. Mavel, C. Marais, and J. Verdu, Interaction between Cracking and Oxidation in Organic Matrix Composites, Journal of Composite Materials, vol.39, issue.15, pp.1371-1389, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00110949

M. C. Lafarie-frenot, Thermo-oxidation behaviour of composite materials at high temperatures: A review of research activities carried out within the COMEDI program, Polymer Degradation and Stability, vol.95, issue.6, pp.965-974, 2010.

B. Fayolle, L. Audouin, G. A. George, and J. Verdu, Macroscopic heterogeneity in stabilized polypropylene thermal oxidation, Polymer Degradation and Stability, vol.77, issue.3, pp.515-522, 2002.

P. Musto, M. Abbate, G. Ragosta, and G. Scarinzi, A study by Raman, near-infrared and dynamic-mechanical spectroscopies on the curing behaviour, molecular structure and viscoelastic properties of epoxy/anhydride networks, Polymer, vol.48, issue.13, pp.3703-3716, 2007.

X. Colin, C. Marais, and J. Verdu, Kinetic modelling and simulation of gravimetric curves: application to the oxidation of bismaleimide and epoxy resins, Polymer Degradation and Stability, vol.78, issue.3, pp.545-553, 2002.

X. Buch and M. E. Shanahan, Thermal and thermo-oxidative ageing of an epoxy adhesive, Polymer Degradation and Stability, vol.68, issue.3, pp.403-411, 2000.

N. Rasoldier, Model systems for thermo-oxidised epoxy composite matrices, Composites Part A: Applied Science and Manufacturing, vol.39, issue.9, pp.1522-1529, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00320015

T. Devanne, Radiochemical ageing of an amine cured epoxy network. Part II: kinetic modelling, Polymer, vol.46, issue.1, pp.237-241, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00110957

S. Cukierman, J. Halary, and L. Monnerie, Molecular analysis of the viscoelastic properties of epoxy networks as deduced from the study of model systems, Journal of Non-Crystalline Solids, pp.898-905, 1991.

J. P. Pascault, H. Sautereau, J. Verdu, and R. J. Williams, Thermosetting Polymers, 14 vols, 2002.

E. Ernault, E. Richaud, and B. Fayolle, Thermal-oxidation of epoxy/amine followed by glass transition temperature changes, Polymer Degradation and Stability, vol.138, pp.82-90, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01493877

P. Demont, M. Diffalah, J. J. Martinez-vega, and C. Lacabanne, Study of molecular mobility at the secondary relaxations range in polyamide 66 and polyamide 66/EPR blends by thermally stimulated creep and current, Journal of Non-Crystalline Solids, pp.978-984, 1994.

V. B. Gupta, L. T. Drzal, C. Y. Lee, and M. J. Rich, The temperature-dependence of some mechanical properties of a cured epoxy resin system, Polymer Engineering & Science, vol.25, issue.13, pp.812-823

D. S. Dugdale, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, issue.2, pp.100-104, 1960.

U. M. Vakil and G. C. Martin, Yield and fracture behaviour of cross-linked epoxies, J Mater Sci, vol.28, issue.16, pp.4442-4450, 1993.

J. D. Lemay, Structure and ultimate properties of epoxy resins, Advances in Polymer Science, vol.78, pp.115-148, 1986.

L. Heux, J. L. Halary, F. Lauprêtre, and L. Monnerie, Dynamic mechanical and 13C n.m.r. investigations of molecular motions involved in the relaxation of epoxy networks based on DGEBA and aliphatic amines, Polymer, vol.38, issue.8, pp.1767-1778, 1997.

E. Ernault, Thermo-oxydation de résines époxy/amine, 2016.

W. D. Cook, A. E. Mayr, and G. H. Edward, Yielding behaviour in model epoxy thermosets -II. Temperature dependence, Polymer, vol.39, issue.16, pp.3725-3733, 1998.

A. E. Mayr, W. D. Cook, and G. H. Edward, Yielding behaviour in model epoxy thermosets -I. Effect of strain rate and composition, Polymer, vol.39, issue.16, pp.3719-3724, 1998.

C. I. Vallo, P. M. Frontini, and R. J. Williams, Elastic modulus and yield stress of epoxy networks in the glassy state, Polymer Gels and Networks, vol.1, issue.4, pp.257-266, 1993.

E. Espuche, J. Galy, J. Gérard, J. Pascault, and H. Sautereau, Influence of crosslink density and chain flexibility on mechanical properties of model epoxy networks, Macromolecular Symposia, vol.93, issue.1, pp.107-115

C. Damian, M. Escoubes, and E. Espuche, Gas and water transport properties of epoxy-amine networks: Influence of crosslink density, J. Appl. Polym. Sci, vol.80, issue.11, pp.2058-2066, 2001.

. Références,

T. Devanne, Radiochemical ageing of an amine cured epoxy network. Part II: kinetic modelling, Polymer, vol.46, issue.1, pp.237-241, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00110957

S. Terekhina, M. Mille, B. Fayolle, and X. Colin, Oxidation induced changes in viscoelastic properties of a thermostable epoxy matrix, Polym. Sci. Ser. A, vol.55, issue.10, pp.614-624, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01001693

X. Buch and M. E. Shanahan, Thermal and thermo-oxidative ageing of an epoxy adhesive, Polymer Degradation and Stability, vol.68, issue.3, pp.403-411, 2000.

E. Ernault, E. Richaud, and B. Fayolle, Thermal-oxidation of epoxy/amine followed by glass transition temperature changes, Polymer Degradation and Stability, vol.138, pp.82-90, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01493877

H. M. Le-huy, V. Bellenger, J. Verdu, and M. Paris, Thermal oxidation of anhydride cured epoxies-III. Effect on mechanical properties, Polymer Degradation and Stability, vol.41, issue.2, pp.149-156, 1993.

P. Musto, G. Ragosta, P. Russo, and L. Mascia, Thermal-Oxidative Degradation of Epoxy and Epoxy-Bismaleimide Networks: Kinetics and Mechanism, Macromol. Chem. Phys, vol.202, issue.18, pp.3445-3458, 2001.

P. Musto, Two-Dimensional FTIR Spectroscopy Studies on the Thermal-Oxidative Degradation of Epoxy and Epoxy?Bis(maleimide) Networks, Macromolecules, vol.36, issue.9, pp.3210-3221, 2003.

S. V. Levchik, Mechanistic study of thermal behaviour and combustion performance of epoxy resins. II. TGDDM/DDS system, Polymer Degradation and Stability, vol.48, issue.3, pp.359-370, 1995.

E. Ernault, E. Richaud, and B. Fayolle, Thermal oxidation of epoxies: Influence of diamine hardener, Polymer Degradation and Stability, vol.134, pp.76-86, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01473986

Y. Zahra, F. Djouani, B. Fayolle, M. Kuntz, and J. Verdu, Thermo-oxidative aging of epoxy coating systems, Progress in Organic Coatings, vol.77, issue.2, pp.380-387, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00980633

C. Galant, B. Fayolle, M. Kuntz, and J. Verdu, Thermal and radio-oxidation of epoxy coatings, Progress in Organic Coatings, vol.69, issue.4, pp.322-329, 2010.

J. L. Bolland and G. Gee, Kinetic studies in the chemistry of rubber and related materials. II. The kinetics of oxidation of unconjugated olefins, Trans. Faraday Soc, vol.42, issue.0, pp.236-243, 1946.

B. Mailhot, S. Morlat-thérias, M. Ouahioune, and J. Gardette, Study of the Degradation of an Epoxy/Amine Resin, 1, Macromol. Chem. Phys, vol.206, issue.5, pp.575-584, 2005.

B. Mailhot, S. Morlat-thérias, P. Bussière, and J. Gardette, Study of the Degradation of an Epoxy/Amine Resin, 2, Macromol. Chem. Phys, vol.206, issue.5, pp.585-591, 2005.

A. Rivaton, L. Moreau, and J. Gardette, Photo-oxidation of phenoxy resins at long and short wavelengths-II. Mechanisms of formation of photoproducts, Polymer Degradation and Stability, vol.58, issue.3, pp.333-339, 1997.

A. Rivaton, B. Mailhot, J. Soulestin, H. Varghese, and J. L. Gardette, Comparison of the photochemical and thermal degradation of bisphenol-A polycarbonate and trimethylcyclohexane-polycarbonate, Polymer Degradation and Stability, vol.75, issue.1, pp.17-33, 2002.

C. Damian, E. Espuche, and M. Escoubes, Influence of three ageing types (thermal oxidation, radiochemical and hydrolytic ageing) on the structure and gas transport properties of epoxyamine networks, Thermo-oxydation des résines époxy/amine aromatiques et modélisation des cinétiques d'oxydation, vol.72, p.209, 2001.

B. Dao, J. Hodgkin, J. Krstina, J. Mardel, and W. Tian, Accelerated aging versus realistic aging in aerospace composite materials. I. The chemistry of thermal aging in a low-temperature-cure epoxy composite, J. Appl. Polym. Sci, vol.102, issue.5, pp.4291-4303, 2006.

N. Longiéras, M. Sebban, P. Palmas, A. Rivaton, and J. L. Gardette, Degradation of epoxy resins under high energy electron beam irradiation: Radio-oxidation, Polymer Degradation and Stability, vol.92, issue.12, pp.2190-2197, 2007.

E. Ernault, Thermo-oxydation de résines époxy/amine, 2016.

E. T. Denisov and I. B. , Afanas'ev, Oxidation and Antioxidants in Organic Chemistry and Biology, 2005.

O. Okamba-diogo, E. Richaud, J. Verdu, F. Fernagut, J. Guilment et al., Molecular and macromolecular structure changes in polyamide 11 during thermal oxidation, Polymer Degradation and Stability, vol.108, pp.123-132, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01174700

S. Korcek, J. H. Chenier, J. A. Howard, and K. U. Ingold, Absolute Rate Constants for Hydrocarbon Autoxidation. XXI. Activation Energies for Propagation and the Correlation of Propagation Rate Constants with Carbon-Hydrogen Bond Strengths, 100 Years of CSC in the Pages of CJC, vol.01, pp.2285-2297, 2011.

V. Bellenger and J. Verdu, Structure-photooxidative stability relationship of amine-crosslinked epoxies, Polymer Photochemistry, vol.5, issue.1, pp.295-311, 1984.

V. J. Eichler and J. Mleziva, Studium der Reaktivität von aromatischen Diaminen mit Epoxidharzen, Angew. Makromol. Chem, vol.19, issue.1, pp.31-55, 1971.

V. Bellenger, E. Fontaine, A. Fleishmann, J. Saporito, and J. Verdu, Thermogravimetric study of amine cross-linked epoxies, Polymer Degradation and Stability, vol.9, issue.4, pp.195-208, 1984.

J. C. Paterson-jones, The mechanism of the thermal degradation of aromatic amine-cured glycidyl ether-type epoxide resins, J. Appl. Polym. Sci, vol.19, issue.6, pp.1539-1547, 1975.

J. Decelle, N. Huet, and V. Bellenger, Oxidation induced shrinkage for thermally aged epoxy networks, Polymer Degradation and Stability, vol.81, issue.2, pp.239-248, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00113832

X. Colin, B. Fayolle, L. Audouin, and J. Verdu, About a quasi-universal character of unstabilised polyethylene thermal oxidation kinetics, Polymer Degradation and Stability, vol.80, issue.1, pp.67-74, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00113813

E. Richaud, B. Fayolle, J. Verdu, and J. Rychlý, Co-oxidation kinetic model for the thermal oxidation of polyethylene-unsaturated substrate systems, Polymer Degradation and Stability, vol.98, issue.5, pp.1081-1088, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00996704

N. Khelidj, X. Colin, L. Audouin, J. Verdu, C. Monchy-leroy et al., Oxidation of polyethylene under irradiation at low temperature and low dose rate. Part II. Low temperature thermal oxidation, Polymer Degradation and Stability, vol.91, issue.7, pp.1598-1605, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00199223

M. Coquillat, J. Verdu, X. Colin, L. Audouin, and R. Nevière, Thermal oxidation of polybutadiene. Part 2: Mechanistic and kinetic schemes for additive-free non-crosslinked polybutadiene, Polymer Degradation and Stability, vol.92, issue.7, pp.1334-1342, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00199759

M. Coquillat, J. Verdu, X. Colin, L. Audouin, and R. Nevière, Thermal oxidation of polybutadiene. Part 3: Molar mass changes of additive-free non-crosslinked polybutadiene, Polymer Degradation and Stability, vol.92, issue.7, pp.1343-1349, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00199759

A. François-heude, E. Richaud, E. Desnoux, and X. Colin, A general kinetic model for the photothermal oxidation of polypropylene, Journal of Photochemistry and Photobiology A: Chemistry, vol.296, pp.48-65, 2015.

, Thermo-oxydation des résines époxy/amine aromatiques et modélisation des cinétiques d'oxydation, vol.4, p.210

L. Olivier, N. Q. Ho, J. C. Grandidier, and M. C. Lafarie-frenot, Characterization by ultramicro indentation of an oxidized epoxy polymer: Correlation with the predictions of a kinetic model of oxidation, Polymer Degradation and Stability, vol.93, issue.2, pp.489-497, 2008.

V. Bellenger, J. Decelle, and N. Huet, Ageing of a carbon epoxy composite for aeronautic applications, Composites Part B: Engineering, vol.36, issue.3, pp.189-194, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00300569

X. Colin, C. Marais, and J. Verdu, Kinetic modelling and simulation of gravimetric curves: application to the oxidation of bismaleimide and epoxy resins, Polymer Degradation and Stability, vol.78, issue.3, pp.545-553, 2002.

E. Richaud, F. Farcas, P. Bartoloméo, B. Fayolle, L. Audouin et al., Effect of oxygen pressure on the oxidation kinetics of unstabilised polypropylene, Polymer Degradation and Stability, vol.91, issue.2, pp.398-405, 2006.

O. Okamba-diogo, E. Richaud, J. Verdu, F. Fernagut, J. Guilment et al., Molecular and macromolecular structure changes in polyamide 11 during thermal oxidation -Kinetic modeling, Polymer Degradation and Stability, vol.120, pp.76-87, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01174700

E. Richaud, Durabilité des Géotextiles en Polypropylène, phdthesis, Arts et Métiers ParisTech, 2006.

Y. Zahra, Dégradation de réseaux époxy/amine en ambiance nucléaire, 2012.

M. C. Celina and A. Quintana, Oxygen diffusivity and permeation through polymers at elevated temperature, Polymer, 2018.

E. Richaud, O. Diogo, B. Fayolle, J. Verdu, J. Guilment et al., Review: Auto-oxidation of aliphatic polyamides, Polymer Degradation and Stability, vol.98, issue.9, pp.1929-1939, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00992028

. Références,

N. V. Datla, M. Papini, J. Ulicny, B. Carlson, and J. K. Spelt, The effects of test temperature and humidity on the mixed-mode fatigue behavior of a toughened adhesive aluminum joint, Engineering Fracture Mechanics, vol.78, issue.6, pp.1125-1139, 2011.

S. Popineau and M. E. Shanahan, Simple model to estimate adhesion of structural bonding during humid ageing, International Journal of Adhesion and Adhesives, vol.26, issue.5, pp.363-370, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00142201

R. Leger, A. Roy, and J. C. Grandidier, A study of the impact of humid aging on the strength of industrial adhesive joints, International Journal of Adhesion and Adhesives, vol.44, pp.66-77, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01883671

J. M. Kropka, D. B. Adolf, S. Spangler, K. Austin, and R. S. Chambers, Mechanisms of degradation in adhesive joint strength: Glassy polymer thermoset bond in a humid environment, International Journal of Adhesion and Adhesives, vol.63, pp.14-25, 2015.

B. De&apos;nève and M. E. Shanahan, Water absorption by an epoxy resin and its effect on the mechanical properties and infra-red spectra, Polymer, vol.34, issue.24, pp.5099-5105, 1993.

A. A. Roche, J. Bouchet, and S. Bentadjine, Formation of epoxy-diamine/metal interphases, International Journal of Adhesion and Adhesives, vol.22, issue.6, pp.431-441, 2002.

M. Aufray and A. Roche, Epoxy-amine/metal interphases: Influences from sharp needlelike crystal formation, International Journal of Adhesion and Adhesives, vol.27, issue.5, pp.387-393, 2007.

A. Toscano, G. Pitarresi, M. Scafidi, M. D. Filippo, G. Spadaro et al., Water diffusion and swelling stresses in highly crosslinked epoxy matrices, Polymer Degradation and Stability, vol.133, pp.255-263, 2016.

M. C. Lee and N. A. Peppas, Water transport in graphite/epoxy composites, Journal of Applied Polymer Science, vol.47, issue.8, pp.1349-1359, 1993.

G. Z. Xiao and M. E. Shanahan, Swelling of DGEBA/DDA epoxy resin during hygrothermal ageing, Polymer, vol.39, issue.14, pp.3253-3260, 1998.

A. Simar, M. Gigliotti, J. C. Grandidier, and I. Ammar-khodja, Evidence of thermo-oxidation phenomena occurring during hygrothermal aging of thermosetting resins for RTM composite applications, Composites Part A: Applied Science and Manufacturing, vol.66, pp.175-182, 2014.

K. Wapner, M. Stratmann, and G. Grundmeier, In situ infrared spectroscopic and scanning Kelvin probe measurements of water and ion transport at polymer/metal interfaces, Electrochimica Acta, vol.51, issue.16, pp.3303-3315, 2006.

M. M. Wahab, I. A. Ashcroft, A. D. Crocombe, and S. J. Shaw, Diffusion of Moisture in Adhesively Bonded Joints, The Journal of Adhesion, vol.77, issue.1, pp.43-80, 2001.

C. D. Liljedahl, A. D. Crocombe, F. E. Gauntlett, M. S. Rihawy, and A. S. Clough, Characterising moisture ingress in adhesively bonded joints using nuclear reaction analysis, International Journal of Adhesion and Adhesives, vol.29, issue.4, pp.356-360, 2009.

M. P. Zanni-deffarges and M. E. Shanahan, Diffusion of water into an epoxy adhesive: comparison between bulk behaviour and adhesive joints, International Journal of Adhesion and Adhesives, vol.15, issue.3, pp.137-142, 1995.

M. Jackson, M. Kaushik, S. Nazarenko, S. Ward, R. Maskell et al., Effect of free volume hole-size on fluid ingress of glassy epoxy networks, Polymer, vol.52, issue.20, pp.4528-4535, 2011.

K. Frank, Fluid uptake behavior of multifunctional epoxy blends, Polymer, vol.54, issue.1, pp.403-410, 2013.

L. Li, Y. Yu, Q. Wu, G. Zhan, and S. Li, Effect of chemical structure on the water sorption of amine-cured epoxy resins, Corrosion Science, vol.12, issue.51, pp.3000-3006, 2009.

J. Cognard, Science et technologie du collage. PPUR presses polytechniques, 2000.

S. Cotugno, D. Larobina, G. Mensitieri, P. Musto, and G. Ragosta, A novel spectroscopic approach to investigate transport processes in polymers: the case of water-epoxy system, Polymer, vol.42, issue.15, pp.6431-6438, 2001.

S. Popineau, C. Rondeau-mouro, C. Sulpice-gaillet, and M. E. Shanahan, Free/bound water absorption in an epoxy adhesive, Polymer, vol.46, issue.24, pp.10733-10740, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00157171

A. Tcharkhtchi, P. Y. Bronnec, and J. Verdu, Water absorption characteristics of diglycidylether of butane diol-3,5-diethyl-2,4-diaminotoluene networks, Polymer, vol.41, issue.15, pp.5777-5785, 2000.

I. Merdas, F. Thominette, A. Tcharkhtchi, and J. Verdu, Factors governing water absorption by composite matrices, Composites Science and Technology, vol.62, issue.4, pp.487-492, 2002.

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy, Polymer, vol.40, issue.20, pp.5505-5512, 1999.

J. E. Yagoubi, G. Lubineau, F. Roger, and J. Verdu, A fully coupled diffusion-reaction scheme for moisture sorption-desorption in an anhydride-cured epoxy resin, Polymer, vol.53, issue.24, pp.5582-5595, 2012.

F. X. Perrin, M. H. Nguyen, and J. L. Vernet, Water transport in epoxy-aliphatic amine networks -Influence of curing cycles, European Polymer Journal, vol.45, issue.5, pp.1524-1534, 2009.

Y. Joliff, L. Belec, and J. F. Chailan, Modified water diffusion kinetics in an unidirectional glass/fibre composite due to the interphase area: Experimental, analytical and numerical approach, Composite Structures, vol.97, pp.296-303, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01364146

P. Y. Le-gac, G. Roux, P. Davies, B. Fayolle, and J. Verdu, Water clustering in polychloroprene, Polymer, vol.55, issue.12, pp.2861-2866, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01058318

M. Broudin, Water diffusivity in PA66: Experimental characterization and modeling based on free volume theory, European Polymer Journal, vol.67, pp.326-334, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01286051

C. Damian, M. Escoubes, and E. Espuche, Gas and water transport properties of epoxy-amine networks: Influence of crosslink density, J. Appl. Polym. Sci, vol.80, issue.11, pp.2058-2066, 2001.

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy, Polymer, vol.40, issue.20, pp.5505-5512, 1999.

J. E. Yagoubi, G. Lubineau, F. Roger, and J. Verdu, A fully coupled diffusion-reaction scheme for moisture sorption-desorption in an anhydride-cured epoxy resin, Polymer, vol.53, issue.24, pp.5582-5595, 2012.

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part II: variations of glass transition temperature, Polymer, vol.40, issue.20, pp.5513-5522, 1999.

B. Fayolle and J. Verdu, Vieillissement physique des matériaux polymères, 2005.

A. Simar, M. Gigliotti, J. C. Grandidier, and I. Ammar-khodja, Evidence of thermo-oxidation phenomena occurring during hygrothermal aging of thermosetting resins for RTM composite applications, Composites Part A: Applied Science and Manufacturing, vol.66, pp.175-182, 2014.

J. L. Henry, A. L. Ruaya, and A. Garton, The kinetics of polyolefin oxidation in aqueous media, Journal of Polymer Science Part A: Polymer Chemistry, vol.30, issue.8, pp.1693-1703, 1992.