, Plan Climat

, The Independent

, World Energy Outlook, 2010.

R. K. Shah and P. Sekulich, Fundamental of heat exchanger deisng, 2003.

H. Huisseune, C. T'joen, P. D. Jaeger, B. Ameel, S. D. Schampheleire et al., Performance enhancement of a louvered fin heat exchanger by using delta winglet vortex generators, Int. J. Heat Mass Transf, vol.56, issue.1-2, pp.475-487, 2013.

Z. Carija, B. Frankovic, M. Percic, and M. Cavrak, Heat transfer analysis of fin-and-tube heat exchangers with flat and louvered fin geometries, Int. J. Refrig.-Rev. Int. Froid, vol.45, pp.160-167, 2014.

S. Liu and M. Sakr, A comprehensive review on passive heat transfer enhancements in pipe exchangers, Renew. Sustain. Energy Rev, vol.19, pp.64-81, 2013.

V. B. Gawande, A. S. Dhoble, and D. B. Zodpe, Effect of roughness geometries on heat transfer enhancement in solar thermal systems -A review, Renew. Sustain. Energy Rev, vol.32, pp.347-378, 2014.

M. E. Taslim, T. Li, and D. M. Kercher, Experimental Heat Transfer and Friction in Channels Roughened With Angled, V-Shaped and Discrete Ribs on Two Opposite Walls, pp.4-09, 1994.

P. Pongsoi, S. Pikulkajorn, and S. Wongwises, Heat transfer and flow characteristics of spiral fin-and-tube heat exchangers: A review, Int. J. Heat Mass Transf, vol.79, pp.417-431, 2014.

J. Jang, J. Lai, and L. Liu, The thermal-hydraulic characteristics of staggered circular finned-tube heat exchangers under dry and dehumidifying conditions, Int. J. Heat Mass Transf, vol.41, issue.21, pp.3321-3337, 1998.

W. M. Rohsenow, J. P. Hartnett, and Y. I. Cho, Handbook of Heat Transfer

B. Rao, P. K. Kumar, and S. K. Das, Effect of flow distribution to the channels on the thermal performance of a plate heat exchanger, Chem. Eng. Process. Process Intensif, vol.41, issue.1, pp.49-58, 2002.

A. M. Jacobi and R. K. Shah, Heat transfer surface enhancement through the use of longitudinal vortices: A review of recent progress, Exp. Therm. Fluid Sci, vol.11, issue.3, pp.295-309, 1995.

D. Misirlis, Optimization of Heat Exchangers for Intercooled Recuperated Aero Engines, Aerospace, vol.4, issue.1, p.14, 2017.

, Energy Consumption Minimization of an Industrial Furnace by Optimization of Recuperative Heat Exchange | Journal of Mechanics | Cambridge Core

, EBSCOhost | 116201336 | THERMO ECONOMICAL OPTIMIZATION OF PLATE TYPE OF HEAT EXCHANGERS FOR WASTE HEAT RECOVERY

A. Caputo, P. M. Pelagagge, and P. Salini, Heat Exchanger Optimized Design Compared With Installed Industrial Solutions, Appl. Therm. Eng, vol.87, 2015.

, Design and multi-objective optimization of heat exchangers for refrigeratorsScienceDirect

, Practical Optimization -Algorithms and Engineering | Andreas Antoniou | Springer

, Wiley: Evolutionary Optimization Algorithms -Dan Simon, p.15, 2017.

, Entropy generation minimization: The new thermodynamics of finite-size devices and finite-time processes, J. Appl. Phys, vol.79, issue.3, pp.1191-1218, 1996.

, Equipartition of entropy production. An optimality criterion for transfer and separation processes

Z. Guo, H. Zhu, and X. Liang, Entransy-A physical quantity describing heat transfer ability, Int. J. Heat Mass Transf, vol.50, pp.2545-2556, 2007.

M. Xu, J. Guo, and L. Cheng, Application of entransy dissipation theory in heat convection, Front. Energy Power Eng. China, vol.3, issue.4, pp.402-405, 2009.

X. Qian and Z. Li, Analysis of entransy dissipation in heat exchangers, Int. J. Therm. Sci, vol.50, issue.4, pp.608-614, 2011.

R. K. Shah and T. Skiepko, Entropy Generation Extrema and Their Relationship With Heat Exchanger Effectiveness-Number of Transfer Unit Behavior for Complex Flow Arrangements, J. Heat Transf, vol.126, issue.6, pp.994-1002, 2005.

Z. Y. Guo, X. B. Liu, W. Q. Tao, and R. K. Shah, Effectiveness-thermal resistance method for heat exchanger design and analysis, Int. J. Heat Mass Transf, vol.53, pp.2877-2884, 2010.

Q. Chen, H. Zhu, N. Pan, and Z. Guo, An alternative criterion in heat transfer optimization, Proc. R. Soc. Lond. Math. Phys. Eng. Sci, vol.467, issue.2128, pp.1012-1028, 2011.

P. K. Swamee, N. Aggarwal, and V. Aggarwal, Optimum design of double pipe heat exchanger, Int. J. Heat Mass Transf, vol.51, issue.9, pp.2260-2266, 2008.

A. Ghanei, E. Assareh, M. Biglari, A. Ghanbarzadeh, and A. R. Noghrehabadi, Thermaleconomic multi-objective optimization of shell and tube heat exchanger using particle swarm optimization (PSO), Heat Mass Transf, vol.50, issue.10, pp.1375-1384, 2014.

S. Huang, Z. Ma, and P. Cooper, Optimal design of vertical ground heat exchangers by using entropy generation minimization method and genetic algorithms, Energy Convers. Manag, vol.87, pp.128-137, 2014.

J. Guo and M. Xu, The application of entransy dissipation theory in optimization design of heat exchanger, Appl. Therm. Eng, vol.36, pp.227-235, 2012.

S. Huang, Z. Ma, and F. Wang, A multi-objective design optimization strategy for vertical ground heat exchangers, Energy Build, vol.87, pp.233-242, 2015.

D. Juan and Q. Z. Qin, Multi-objective optimization of a plain fin-and-tube heat exchanger using genetic algorithm, Therm. Eng, vol.61, issue.4, pp.309-317, 2014.

H. H. Bau, Optimization of conduits' shape in micro heat exchangers, Int. J. Heat Mass Transf, vol.41, issue.18, pp.2717-2723, 1998.

R. Hilbert, G. Janiga, R. Baron, and D. Thévenin, Multi-objective shape optimization of a heat exchanger using parallel genetic algorithms, Int. J. Heat Mass Transf, vol.49, issue.15, pp.2567-2577, 2006.

K. Lee, W. Kim, and J. Si, Optimal shape and arrangement of staggered pins in the channel of a plate heat exchanger, Int. J. Heat Mass Transf, vol.44, issue.17, pp.3223-3231, 2001.

A. D?ugosz, T. Burczy?ski, and W. Ku?, Parallel evolutionary algorithms in shape optimization of heat exchangers under thermomechanical loading, Pr. Nauk. Politech. Warsz. Elektron, vol.156, pp.97-105, 2006.

K. Foli, T. Okabe, M. Olhofer, Y. Jin, and B. Sendhoff, Optimization of micro heat exchanger: CFD, analytical approach and multi-objective evolutionary algorithms, Int. J. Heat Mass Transf, vol.49, issue.5, pp.1090-1099, 2006.

B. Daniel, L. Vincent, R. Serge, J. Luc, and H. , Optimisation de la géométrie de canaux d'échangeurs thermiques par simulation numérique

, Topology Optimization of Heat Exchangers | TU Delft Repositories, p.15, 2017.

M. Bendsoe, O. Philip, and . Sigmund, Topology optimization: theory, methods and applications, 2003.

M. P. Bendsøe and N. Kikuchi, Generating optimal topologies in structural design using a homogenization method, Comput. Methods Appl. Mech. Eng, vol.71, issue.2, pp.197-224, 1988.

, Topology Optimization Program

G. Marck, M. Nemer, J. Harison, S. Russeil, and D. Bougeard, Topology optimization using the SIMP method for multiobjective conductive problems, Numerical Heat Transfer, Part B: Fundamentals, vol.61, issue.6, pp.439-470, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00769597

G. Marck, M. Nemer, and J. Harion, Topology Optimization of Heat and Mass Transfer Problems: Laminar Flow, Numer. Heat Transf. Part B Fundam, vol.63, issue.6, pp.508-539, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00880111

E. M. Dede, Multiphysics topology optimization of heat transfer and fluid flow systems, proceedings of the COMSOL Users Conference, 2009.

M. P. Bendsøe, Optimal shape design as a material distribution problem, Struct. Optim, vol.1, issue.4, pp.193-202, 1989.

M. P. Bendsøe and O. Sigmund, Material interpolation schemes in topology optimization, Arch. Appl. Mech, vol.69, issue.9, pp.635-654, 1999.

M. Stolpe and K. Svanberg, An alternative interpolation scheme for minimum compliance topology optimization, Struct. Multidiscip. Optim, vol.22, issue.2, pp.116-124, 2014.

M. Stolpe and K. Svanberg, On the trajectories of penalization methods for topology optimization, Struct. Multidiscip. Optim, vol.21, issue.2, pp.128-139, 2014.

N. L. Pedersen, Maximization of eigenvalues using topology optimization, Struct. Multidiscip. Optim, vol.20, issue.1, pp.2-11, 2014.

T. E. Bruns, A reevaluation of the SIMP method with filtering and an alternative formulation for solid-void topology optimization, Struct. Multidiscip. Optim, vol.30, issue.6, pp.428-436, 2005.

T. Borrvall and J. Petersson, Topology optimization using regularized intermediate density control, Comput. Methods Appl. Mech. Eng, vol.190, pp.4911-4928, 2001.

S. Osher and J. A. Sethian, Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations, J. Comput. Phys, vol.79, issue.1, pp.12-49, 1988.

H. A. Eschenauer, V. V. Kobelev, and A. Schumacher, Bubble method for topology and shape optimization of structures, Struct. Optim, vol.8, issue.1, pp.42-51, 1994.

X. Huang and M. Xie, Evolutionary Topology Optimization of Continuum Structures: Methods and Applications Evolutionary Topology Optimization of Continuum Structures: Methods and Applications, 2010.

Y. M. Xie and G. P. Steven, A simple evolutionary procedure for structural optimization, Comput. Struct, vol.49, issue.5, pp.885-896, 1993.

V. Young, O. M. Querin, G. P. Steven, and Y. M. Xie, 3D and multiple load case bidirectional evolutionary structural optimization (BESO), Struct. Optim, vol.18, issue.2-3, pp.183-192, 1999.

Q. Li, G. P. Steven, Y. M. Xie, and O. M. Querin, Evolutionary topology optimization for temperature reduction of heat conducting fields, Int. J. Heat Mass Transf, vol.47, issue.23, pp.5071-5083, 2004.

Q. Li, G. P. Steven, O. M. Querin, and Y. M. Xie, Shape and topology design for heat conduction by Evolutionary Structural Optimization, Int. J. Heat Mass Transf, vol.42, issue.17, pp.3361-3371, 1999.

X. Huang and Y. M. Xie, Bi-directional evolutionary topology optimization of continuum structures with one or multiple materials, Comput. Mech, vol.43, issue.3, pp.393-401, 2008.

T. Borrvall and J. Petersson, Topology optimization of fluids in Stokes flow, Int. J. Numer. Methods Fluids, vol.41, issue.1, pp.77-107, 2003.

N. Aage, T. H. Poulsen, A. Gersborg-hansen, and O. Sigmund, Topology optimization of large scale stokes flow problems, Struct. Multidiscip. Optim, vol.35, issue.2, pp.175-180, 2007.

A. Gersborg-hansen, M. Berggren, and B. Dammann, Topology Optimization of Mass Distribution Problems in Stokes Flow, IUTAM Symp. Topol. Des. Optim. Struct. Mach. Mater. Springer Neth, pp.365-374, 2006.

J. K. Guest and J. H. Prévost, Topology optimization of creeping fluid flows using a Darcy-Stokes finite element, Int. J. Numer. Methods Eng, vol.66, issue.3, pp.461-484, 2006.

N. Wiker, A. Klarbring, and T. Borrvall, Topology optimization of regions of Darcy and Stokes flow, Int. J. Numer. Methods Eng, vol.69, issue.7, pp.1374-1404, 2007.

A. Evgrafov, The Limits of Porous Materials in the Topology Optimization of Stokes Flows, Appl. Math. Optim, vol.52, issue.3, pp.263-277, 2005.

A. Gersborg-hansen, O. Sigmund, and R. B. Haber, Topology optimization of channel flow problems, Struct. Multidiscip. Optim, vol.30, issue.3, pp.181-192, 2005.

L. H. Olesen, F. Okkels, and H. Bruus, A high-level programming-language implementation of topology optimization applied to steady-state Navier-Stokes flow, Int. J. Numer. Methods Eng, vol.65, issue.7, pp.975-1001, 2006.

Y. Deng, Z. Liu, P. Zhang, Y. Liu, and Y. Wu, Topology optimization of unsteady incompressible Navier-Stokes flows, J. Comput. Phys, vol.230, issue.17, pp.6688-6708, 2011.

S. Kreissl, G. Pingen, and K. Maute, Topology optimization for unsteady flow, Int. J. Numer. Methods Eng, vol.87, issue.13, pp.1229-1253, 2011.

Y. Deng, Z. Liu, and Y. Wu, Topology optimization of steady and unsteady incompressible Navier-Stokes flows driven by body forces, Struct. Multidiscip. Optim, vol.47, issue.4, pp.555-570, 2012.

S. Zhou and Q. Li, A variational level set method for the topology optimization of steadystate Navier-Stokes flow, J. Comput. Phys, vol.227, issue.24, pp.10178-10195, 2008.

X. Duan, Y. Ma, and R. Zhang, Shape-topology optimization for Navier-Stokes problem using variational level set method, J. Comput. Appl. Math, vol.222, issue.2, pp.487-499, 2008.

Y. Michael, P. Xang, and . Wei, Topology optimization with Level Set Method Incorporating Topological Derivative, 6th World Congr. Struct. Multidiscip. Optim, 2005.

Y. Deng, Z. Liu, J. Wu, and Y. Wu, Topology optimization of steady Navier-Stokes flow with body force, Comput. Methods Appl. Mech. Eng, vol.255, pp.306-321, 2013.

V. J. Challis and J. K. Guest, Level set topology optimization of fluids in Stokes flow, Int. J. Numer. Methods Eng, vol.79, issue.10, pp.1284-1308, 2009.

T. E. Bruns, Topology optimization of convection-dominated, steady-state heat transfer problems, Int. J. Heat Mass Transf, vol.50, pp.2859-2873, 2007.

T. Matsumori, T. Kondoh, A. Kawamoto, and T. Nomura, Topology optimization for fluidthermal interaction problems under constant input power, Struct. Multidiscip. Optim, vol.47, issue.4, pp.571-581, 2013.

F. Okkels, L. H. Olesen, and H. Bruus, Applications of topology optimization in the design of micro-and nanofluidic systems, Proc. 2005 NSTI Nanotechnol. Conf. Trade Show, pp.575-578, 2005.

E. M. Dede, Experimental Investigation of the Thermal Performance of a Manifold Hierarchical Microchannel Cold Plate, pp.59-67, 2011.

E. M. Dede, Multiphysics optimization, synthesis, and application of jet impingement target surfaces, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), pp.1-7, 2010.

E. M. Dede, Optimization and Design of a Multipass Branching Microchannel Heat Sink for Electronics Cooling, J. Electron. Packag, vol.134, issue.4, pp.41001-041001, 2012.

G. H. Yoon, Topological design of heat dissipating structure with forced convective heat transfer, J. Mech. Sci. Technol, vol.24, issue.6, pp.1225-1233, 2010.

G. H. Yoon, Topological layout design of electro-fluid-thermal-compliant actuator, Comput. Methods Appl. Mech. Eng, pp.28-44, 2012.

A. A. Koga, E. C. Lopes, H. F. Villa-nova, C. R. De-lima, and E. C. Silva, Development of heat sink device by using topology optimization, Int. J. Heat Mass Transf, vol.64, pp.759-772, 2013.

K. Yaji, T. Yamada, S. Kubo, K. Izui, and S. Nishiwaki, A topology optimization method for a coupled thermal-fluid problem using level set boundary expressions, Int. J. Heat Mass Transf, vol.81, pp.878-888, 2015.

M. Yoshimura, K. Shimoyama, T. Misaka, and S. Obayashi, Topology optimization of fluid problems using genetic algorithm assisted by the Kriging model, Int. J. Numer. Methods Eng, vol.109, issue.4, pp.514-532, 2017.

O. Sigmund and K. Maute, Topology optimization approaches, Struct. Multidiscip. Optim, vol.48, issue.6, pp.1031-1055, 2013.

F. M. White, McGraw Hill International Edition, 2009.

A. Donald, A. Nield, and . Bejan, Convection in Porous Media, 2013.

L. Yin and G. K. Ananthasuresh, Topology optimization of compliant mechanisms with multiple materials using a peak function material interpolation scheme, Struct. Multidiscip. Optim, vol.23, issue.1, pp.49-62, 2001.

H. Versteeg and W. Malalasekera, An introduction to computational fluid dynamics -The finite volume method, 2007.

S. Patankar, Numerical heat transfer and Fluid flow, 1980.

T. Hayase, J. A. Humphrey, and R. Greif, A consistently formulated QUICK scheme for fast and stable convergence using finite-volume iterative calculation procedures, J. Comput. Phys, vol.98, issue.1, pp.108-118, 1992.

H. A. Van-der and . Vorst, BI-CGSTAB: A Fast and Smoothly Converging Variant of BI-CG for the Solution of Nonsymmetric Linear Systems, SIAM J Sci Stat Comput, vol.13, issue.2, pp.631-644, 1992.

, FLUENT 6.3 User's Guide, 2006.

L. D. Landau and E. M. Lifshitz, Course of Theoretical Physics: Fluid Mechanics, vol.6, 2000.

S. Nadarajah and A. Jameson, A comparison of the continuous and discrete adjoint approach to automatic aerodynamic optimization, 38th Aerospace Sciences Meeting and Exhibit

M. B. Giles and N. A. Pierce, An Introduction to the Adjoint Approach to Design, Flow Turbul. Combust, vol.65, issue.3-4, pp.393-415, 2000.

O. Sigmund and J. Petersson, Numerical instabilities in topology optimization: A survey on procedures dealing with checkerboards, mesh-dependencies and local minima, Struct. Optim, vol.16, issue.1, pp.68-75, 1998.

T. E. Bruns and D. A. Tortorelli, Topology optimization of non-linear elastic structures and compliant mechanisms, Comput. Methods Appl. Mech. Eng, vol.190, pp.3443-3459, 2001.

B. Bourdin, Filters in topology optimization, Int. J. Numer. Methods Eng, vol.50, issue.9, pp.2143-2158, 2001.

O. Sigmund, Design of Material Structures Using Topology Optimization Phd Thesis Department of solid mechanics technical university of denmark, 1994.

K. Svanberg, Density filters for topology optimization based on the geometric harmonic means

K. Zuo, L. Chen, Y. Zhang, and J. Yang, Study of key algorithms in topology optimization, Int. J. Adv. Manuf. Technol, vol.32, issue.7-8, pp.787-796, 2006.

K. Svanberg, The method of moving asymptotes-a new method for structural optimization, Int. J. Numer. Methods Eng, vol.24, issue.2, pp.359-373, 1987.

K. Svanberg, A class of globally convergent optimization methods based on conservative complex separable approximations, Soc. Ind. Appl. Math, 2002.

J. D. Deaton and R. V. Grandhi, A survey of structural and multidisciplinary continuum topology optimization, Struct. Multidiscip. Optim, vol.49, issue.1, pp.1-38, 2000.

M. Bruyneel, P. Duysinx, and C. Fleury, A family of MMA approximations for structural optimization, Struct. Multidiscip. Optim, vol.24, issue.4, pp.263-276

M. Bachar, T. Estenbenet, and A. Guessab, A moving asymptotes algorithm using new local convex approximations methods with explicit solutions, Electron. Trans. Numer. Anal, 2014.

O. Sigmund, Topology optimization for multiphysics problems: A future FEMLAB application?, 2003.

A. Yunus and M. A. Boles, Thermodynamics An Engineering Approach

S. Rao, Engineering optimization: therory and practice, 2009.

R. T. Marler and J. S. Arora, Survey of multi-objective optimization methods for engineering, Struct. Multidiscip. Optim, vol.26, issue.6, pp.369-395, 2004.

R. T. Marler and J. S. Arora, The weighted sum method for multi-objective optimization: new insights, Struct. Multidiscip. Optim, vol.41, issue.6, pp.853-862, 2009.

G. Tzeng and J. Huang, Multiple Attribute Decision Making: Methods and Applications, 2011.

O. Grodzevich and O. Romanko, Normalization and Other Topics in Multi-Objective Optimization, Study Group Report, 2006.

A. Bejan, General criterion for rating heat-exchanger performance, Int. J. Heat Mass Transf, vol.21, issue.5, pp.655-658, 1978.

J. Guo, L. Cheng, and M. Xu, Optimization design of shell-and-tube heat exchanger by entropy generation minimization and genetic algorithm, Appl. Therm. Eng, vol.29, pp.2954-2960, 2009.

J. Guo, L. Cheng, and M. Xu, Entransy dissipation number and its application to heat exchanger performance evaluation, Chin. Sci. Bull, vol.54, issue.15, pp.2708-2713, 2009.

B. P. Leonard, A stable and accurate convective modelling procedure based on quadratic upstream interpolation, Comput. Methods Appl. Mech. Eng, vol.19, issue.1, pp.59-98, 1979.