M. Z. Abedin, T. Tsuji, and J. Lee, Effects of freestream on the characteristics of thermally-driven boundary layers along a heated vertical flat plate, International Journal of Heat and Fluid Flow, vol.36, pp.92-100, 2012.

H. I. Abu-mulaweh, T. S. Chen, and B. F. Armaly, Effects of free-stream velocity on turbulent natural-convection flow along a vertical plate, Experimental Heat Transfer, vol.13, issue.3, pp.183-195, 2000.

M. T. Al-asadi, H. A. Mohammed, A. S. Kherbeet, and A. A. Al-aswadi, Numerical study of assisting and opposing mixed convective nanofluid flows in an inclined circular pipe, International Communications in Heat and Mass Transfer, vol.85, pp.81-91, 2017.

R. K. Ali, H. A. Refaey, and M. R. Salem, Effect of package spacing on convective heat transfer from thermal sources mounted on a horizontal surface, Applied Thermal Engineering, vol.132, pp.676-685, 2018.

G. Alvarez and D. Flick, Analysis of heterogeneous cooling of agricultural products inside bins Part I: aerodynamic study, Journal of Food Engineering, vol.39, issue.3, pp.227-237, 1999.

G. Alvarez and D. Flick, Analysis of heterogeneous cooling of agricultural products inside bins: Part II: thermal study, Journal of Food Engineering, vol.39, issue.3, pp.239-245, 1999.

G. Alvarez and D. Flick, Modelling turbulent flow and heat transfer using macroporous media approach used to predict cooling kinetics of stack of food products, Journal of Food Engineering, vol.80, issue.2, pp.391-401, 2007.

Y. Amanlou and A. Zomorodian, Evaluation of air flow resistance across a green fig bed for selecting an appropriate pressure drop prediction equation, Food and Bioproducts Processing, vol.89, pp.157-162, 2011.

A. Ambaw, N. Bessemans, W. Gruyters, S. G. Gwanpua, A. Schenk et al., Analysis of the spatiotemporal temperature fluctuations inside an apple cool store in response to energy use concerns, International Journal of Refrigeration, vol.66, pp.156-168, 2016.

A. Ambaw, M. A. Delele, T. Defraeye, Q. T. Ho, L. U. Opara et al., The use of CFD to characterize and design post-harvest storage facilities: Past, present and future, Computers and Electronics in Agriculture, vol.93, pp.184-194, 2013.

A. Ambaw, M. Mukama, and U. L. Opara, Analysis of the effects of package design on the rate and uniformity of cooling of stacked pomegranates: Numerical and experimental studies, Computers and Electronics in Agriculture, vol.136, pp.13-24, 2017.

N. D. Amos, Characterisation of air flow in a commercial cool store using a carbon monoxide gas tracer technique, Acta Horticulturae, vol.687, pp.305-312, 2005.

, Référence, vol.179

R. Andrzejczyk and T. Muszynski, Thermodynamic and geometrical characteristics of mixed convection heat transfer in the shell and coil tube heat exchanger with baffles, Applied Thermal Engineering, vol.121, pp.115-125, 2017.

Y. Asako and M. Faghri, Parametric study of turbulent three-dimensional heat transfer of arrays of heated blocks encountered in electronic equipment, American Society of Mechanical Engineers, 1991.

H. B. Awbi and A. Hatton, Mixed convection from heated room surfaces, Energy and Buildings, vol.32, issue.2, pp.153-166, 2000.

R. Badia-melis, U. Mc-carthy, L. Ruiz-garcia, J. Garcia-hierro, and R. Villalba, New trends in cold chain monitoring applications -A review, Food Control, vol.86, pp.170-182, 2018.

R. Ben-abdallah, D. Leducq, H. M. Hoang, O. Pateau, B. Ballot-miguet et al., Modeling and experimental investigation for load temperature prediction at transient conditions of open refrigerated display cabinet using Modelica environment, International Journal of Refrigeration, vol.94, pp.102-110, 2018.

T. L. Bergman, A. S. Lavine, F. P. Incropera, and D. P. Dewitt, , 2011.

K. J. Beukema, S. Bruin, and J. Schenk, Heat and mass transfer during cooling and storage of agricultural products, Chemical Engineering Science, vol.37, issue.2, pp.291-298, 1982.

S. D. Bhande, M. R. Ravindra, and T. K. Goswami, Respiration rate of banana fruit under aerobic conditions at different storage temperatures, Journal of Food Engineering, vol.87, issue.1, pp.116-123, 2008.

M. T. Bhoite, G. S. Narasimham, and M. V. Murthy, Mixed convection in a shallow enclosure with a series of heat generating components, International Journal of Thermal Sciences, vol.44, issue.2, pp.121-135, 2005.

L. Boutina and R. Bessaïh, Numerical simulation of mixed convection air-cooling of electronic components mounted in an inclined channel, Applied Thermal Engineering, vol.31, issue.11, pp.2052-2062, 2011.

D. W. Brash, C. M. Charles, S. Wright, and B. L. Bycroft, Shelf-life of stored asparagus is strongly related to postharvest respiratory activity, Postharvest Biology and Technology, vol.5, issue.1, pp.77-81, 1995.

T. Brosnan and D. Sun, Precooling techniques and applications for horticultural products -a review, International Journal of Refrigeration, vol.24, issue.2, pp.154-170, 2001.

O. J. Caleb, P. V. Mahajan, U. L. Opara, and C. R. Witthuhn, Modelling the respiration rates of pomegranate fruit and arils, Postharvest Biology and Technology, vol.64, issue.1, pp.49-54, 2012.

L. R. Castro, C. Vigneault, and L. A. Cortez, Container opening design for horticultural produce cooling efficiency, J. Food Agric. Environ, pp.135-140, 2004.

, Référence, vol.180

L. R. Castro, C. Vigneault, and L. A. Cortez, Effect of container opening area on air distribution during precooling of horticultural produce, Transactions of the Asae, vol.47, issue.6, pp.2033-2038, 2004.

L. R. Castro, C. Vigneault, and L. A. Cortez, Container opening design for horticultural produce cooling efficiency, Food Agric. Environ, pp.135-140, 2004.

V. Chanteloup and P. Mirade, Computational fluid dynamics (CFD) modelling of local mean age of air distribution in forced-ventilation food plants, Journal of Food Engineering, vol.90, issue.1, pp.90-103, 2009.

D. Chayer, Sélection de cultivars de fruits et légumes frais mieux adaptés à la conservation, p.56, 1994.

D. Chong, J. Liu, and J. Yan, Effects of duct inclination angle on thermal entrance region of laminar and transition mixed convection, International Journal of Heat and Mass Transfer, vol.51, issue.15, pp.3953-3962, 2008.

M. K. Chourasia and T. K. Goswami, CFD simulation of effects of operating parameters and product on heat transfer and moisture loss in the stack of bagged potatoes, Journal of Food Engineering, vol.80, issue.3, pp.947-960, 2007.

M. K. Chourasia and T. K. Goswami, Steady state CFD modeling of airflow, heat transfer and moisture loss in a commercial potato cold store, International Journal of Refrigeration, vol.30, issue.4, pp.672-689, 2007.

M. K. Chourasia and T. K. Goswami, Three dimensional modeling on airflow, heat and mass transfer in partially impermeable enclosure containing agricultural produce during natural convective cooling, Energy Conversion and Management, vol.48, issue.7, pp.2136-2149, 2007.

S. Chuntranuluck, C. M. Wells, and A. C. Cleland, Prediction of chilling times of foods in situations where evaporative cooling is significant-Part 1. Method development, Journal of Food Engineering, vol.37, issue.2, pp.111-125, 1998.

S. W. Churchill, Comprehensive, theoretically based, correlating equations for free convection from isothermal spheres, Chemical Engineering Communications, vol.24, issue.4-6, pp.339-352, 1983.

W. Comings, E. Clapp, J. T. Taylor, and J. F. , Air turbulence and transfer processes, Industrial and Engineering Chemistry, pp.1076-1082, 1948.

H. K. Dawood, H. A. Mohammed, C. Sidik, N. A. Munisamy, K. M. Wahid et al., Forced, natural and mixed-convection heat transfer and fluid flow in annulus: A review, International Communications in Heat and Mass Transfer, vol.62, pp.45-57, 2015.

T. Defraeye, B. Blocken, and J. Carmeliet, CFD analysis of convective heat transfer at the surfaces of a cube immersed in a turbulent boundary layer, International Journal of Heat and Mass Transfer, vol.53, issue.1-3, pp.297-308, 2010.

T. Defraeye, P. Cronjé, T. Berry, U. L. Opara, A. East et al., Towards integrated performance evaluation of future packaging for fresh produce in the cold chain, Trends in Food Science & Technology, vol.44, issue.2, pp.201-225, 2015.

T. Defraeye, P. Cronjé, P. Verboven, U. L. Opara, and B. Nicolai, Exploring ambient loading of citrus fruit into reefer containers for cooling during marine transport using computational fluid dynamics, Postharvest Biology and Technology, vol.108, pp.91-101, 2015.

T. Defraeye, R. Lambrecht, M. A. Delele, A. A. Tsige, U. L. Opara et al., Forced-convective cooling of citrus fruit: Cooling conditions and energy consumption in relation to package design, Journal of Food Engineering, vol.121, pp.118-127, 2014.

T. Defraeye, R. Lambrecht, A. A. Tsige, M. A. Delele, U. L. Opara et al., Forced-convective cooling of citrus fruit: Package design, Journal of Food Engineering, vol.118, issue.1, pp.8-18, 2013.

T. Defraeye, B. Nicolai, W. Kirkman, S. Moore, S. V. Niekerk et al., Integral performance evaluation of the fresh-produce cold chain: A case study for ambient loading of citrus in refrigerated containers, Postharvest Biology and Technology, vol.112, pp.1-13, 2016.

T. Defraeye, P. Verboven, and B. Nicolai, CFD modelling of flow and scalar exchange of spherical food products: Turbulence and boundary-layer modelling, Journal of Food Engineering, vol.114, issue.4, pp.495-504, 2013.

T. Defraeye, P. Verboven, U. L. Opara, B. Nicolai, and P. Cronjé, Feasibility of ambient loading of citrus fruit into refrigerated containers for cooling during marine transport, Biosystems Engineering, vol.134, pp.20-30, 2015.

T. Defraeye, W. Wu, K. Prawiranto, G. Fortunato, S. Kemp et al., Artificial fruit for monitoring the thermal history of horticultural produce in the cold chain, Journal of Food Engineering, vol.215, pp.51-60, 2017.

J. Dehghannya, M. Ngadi, and C. Vigneault, Mathematical modeling of airflow and heat transfer during forced convection cooling of produce considering various package vent areas, Food Control, vol.22, issue.8, pp.1393-1399, 2011.

J. Dehghannya, M. Ngadi, and C. Vigneault, Transport phenomena modelling during produce cooling for optimal package design: Thermal sensitivity analysis, Biosystems Engineering, vol.111, issue.3, pp.315-324, 2012.

M. A. Delele, M. E. Ngcobo, S. T. Getahun, L. Chen, J. Mellmann et al., Studying airflow and heat transfer characteristics of a horticultural produce packaging system using a 3-D CFD model. Part I: Model development and validation, Postharvest Biology and Technology, vol.86, pp.536-545, 2013.

M. A. Delele, M. E. Ngcobo, S. T. Getahun, L. Chen, J. Mellmann et al., Studying airflow and heat transfer characteristics of a horticultural produce 3-D CFD model. Part II: Effect of package design, Postharvest Biology and Technology, vol.86, pp.546-555, 2013.

M. A. Delele, A. Schenk, H. Ramon, B. M. Nicolaï, and P. Verboven, Evaluation of a chicory root cold store humidification system using computational fluid dynamics, Journal of Food Engineering, vol.94, issue.1, pp.110-121, 2009.

M. A. Delele, A. Schenk, E. Tijskens, H. Ramon, B. M. Nicolaï et al., Optimization of the humidification of cold stores by pressurized water atomizers based on a multiscale CFD model, Journal of Food Engineering, vol.91, issue.2, pp.228-239, 2009.

M. A. Delele, E. Tijskens, Y. T. Atalay, Q. T. Ho, H. Ramon et al., Combined discrete element and CFD modelling of airflow through random stacking of horticultural products in vented boxes, Journal of Food Engineering, vol.89, issue.1, pp.33-41, 2008.

E. Derens-bertheau, V. Osswald, O. Laguerre, and G. Alvarez, Cold chain of chilled food in France, International Journal of Refrigeration, vol.52, pp.161-167, 2015.

E. Derens, J. Gahartian, and J. Moureh, , 2012.

I. Dincer, Development of new effective Nusselt-Reynolds correlations for aircooling of spherical and cylindrical products, International Journal of Heat and Mass Transfer, vol.37, issue.17, pp.2781-2787, 1994.

I. Dincer, Air flow precooling of individual grapes, Journal of Food Engineering, vol.26, issue.2, pp.243-249, 1995.

B. Durand-estebe, L. Bot, C. Mancos, J. N. Arquis, and E. , Simulation of a temperature adaptive control strategy for an IWSE economizer in a data center, Applied Energy, vol.134, pp.45-56, 2014.

S. Duret, H. M. Hoang, D. Flick, and O. Laguerre, Experimental characterization of airflow, heat and mass transfer in a cold room filled with food products, International Journal of Refrigeration, vol.46, pp.17-25, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01173923

S. Durgam, S. P. Venkateshan, and T. Sundararajan, Experimental and numerical investigations on optimal distribution of heat source array under natural and forced convection in a horizontal channel, International Journal of Thermal Sciences, vol.115, pp.125-138, 2017.

B. Eisfeld and K. Schnitzlein, The influence of confining walls on the pressure drop in packed beds, Chemical Engineering Science, vol.56, 2001.

J. P. Emond and F. Mercier, Study on food transportation in Northern Labrador, 2000.

M. J. Ferrua and R. P. Singh, A nonintrusive flow measurement technique to validate the simulated laminar fluid flow in a packed container with vented walls, International Journal of Refrigeration, vol.31, issue.2, pp.242-255, 2008.

, Référence, vol.183

M. J. Ferrua and R. P. Singh, Design guidelines for the forced-air cooling process of strawberries, International Journal of Refrigeration, vol.32, issue.8, pp.1932-1943, 2009.

M. J. Ferrua and R. P. Singh, Modeling the forced-air cooling process of fresh strawberry packages, Part I: Numerical model, International Journal of Refrigeration, vol.32, issue.2, pp.335-348, 2009.

M. J. Ferrua and R. P. Singh, Modeling the forced-air cooling process of fresh strawberry packages, Part II: Experimental validation of the flow model, International Journal of Refrigeration, vol.32, issue.2, pp.349-358, 2009.

B. Finn, Sensitivity analysis using CFD of air distribution in transport refrigeration containers 20th Congress. International Institute of Refrigeration, 2003.

W. B. Fitzgerald, O. J. Howitt, I. J. Smith, and A. Hume, Energy use of integral refrigerated containers in maritime transportation, Energy Policy, vol.39, issue.4, pp.1885-1896, 2011.

D. Flick, G. Alvarez, C. Doursat, and J. Moureh, Modélisation des écoulements et des transferts lors du refroidissement de fruits et légumes conditionnés en palettes, 20th International Congress of Refrigeration IIR-IIF, 1999.

B. A. Fricke and B. R. Becker, Calculation of heat transfer coefficients for foods, International Communications in Heat and Mass Transfer, vol.29, issue.6, pp.731-740, 2002.

A. Gac, Refrigerated transport: what's new?, International Journal of Refrigeration, vol.25, issue.5, pp.501-503, 2002.

J. J. Gaffney, C. D. Baird, and K. V. Chau, Influence of airflow rate, respiration, evaporative cooling, and other factors affecting weight loss calculations for fruits and vegetables, pp.690-707, 1985.

J. Gustavsson, C. Cederberg, U. Sonesson, R. V. Otterdijk, and A. Meybeck, Global Food Losses and Food Waste. Extent, Causes and Prevention, 2011.

J. Han, C. Zhao, X. Yang, J. Qian, and B. Fan, Computational modeling of airflow and heat transfer in a vented box during cooling: Optimal package design, Applied Thermal Engineering, vol.91, pp.883-893, 2015.

J. P. Harnett and T. F. Irvine, Advances in heat transfer, 1984.

Y. Hattori, T. Tsuji, Y. Nagano, and N. Tanaka, Characteristics of turbulent combined-convection boundary layer along a vertical heated plate, International Journal of Heat and Fluid Flow, vol.21, issue.5, pp.520-525, 2000.

Y. Hattori, T. Tsuji, Y. Nagano, and N. Tanaka, Effects of freestream on turbulent combined-convection boundary layer along a vertical heated plate, International Journal of Heat and Fluid Flow, vol.22, issue.3, pp.315-322, 2001.

A. Hélias, I. C. Trelea, and G. Corrieu, Assessment of respiratory activity during surface-mould cheese ripening, Journal of Food Engineering, vol.85, issue.4, pp.632-638, 2008.

, Référence, vol.184

M. L. Hellickson and R. A. Baskins, Visual documentation of air flow patterns in a controlled atmosphere storage, Acta Horticulturae, vol.600, pp.173-179, 2003.

S. H. Ho, L. Rosario, and M. M. Rahman, Numerical simulation of temperature and velocity in a refrigerated warehouse, International Journal of Refrigeration, vol.33, issue.5, pp.1015-1025, 2010.

H. Hoang, S. Duret, D. Flick, and O. Laguerre, Preliminary study of airflow and heat transfer in a cold room filled with apple pallets: Comparison between two modelling approaches and experimental results, Applied Thermal Engineering, vol.76, pp.367-381, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01173941

M. H. Hoang, O. Laguerre, J. Moureh, and D. Flick, Heat transfer modelling in a ventilated cavity loaded with food product: Application to a refrigerated vehicle, Journal of Food Engineering, vol.113, issue.3, pp.389-398, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01432624

M. L. Hoang, P. Verboven, J. De-baerdemaeker, and B. M. Nicola??, Analysis of the air flow in a cold store by means of computational fluid dynamics, International Journal of Refrigeration, vol.23, issue.2, pp.127-140, 2000.

J. P. Holman, Heat Transfer, 2010.

Z. Huang, Z. Li, and W. Tao, Numerical study on combined natural and forced convection in the fully-developed turbulent region for a horizontal circular tube heated by non-uniform heat flux, Applied Energy, vol.185, pp.2194-2208, 2017.

R. Iezzi, S. Francolino, and G. Mucchetti, Natural convective cooling of cheese: Predictive model and validation of heat exchange simulation, Journal of Food Engineering, vol.106, issue.1, pp.88-94, 2011.

M. T. Islam, S. Saha, M. A. Mamun, and M. Ali, Two Dimensional Numerical Simulation of Mixed Convection in a Rectangular Open Enclosure, vol.4, pp.125-137, 2008.

J. Dehghannya, M. N. , and C. Vigneault, Simultaneous Aerodynamic and Thermal Analysis during Cooling of Stacked Spheres inside Ventilated Packages, 2008.

S. J. James, C. James, and J. A. Evans, Modelling of food transportation systems -a review, International Journal of Refrigeration, vol.29, issue.6, pp.947-957, 2006.

D. D. Joye, Comparison of aiding and opposing mixed convection heat transfer in a vertical tube with Grashof number variation, International Journal of Heat and Fluid Flow, vol.17, issue.2, pp.96-101, 1996.

D. D. Joye, Pressure drop correlation for laminar, mixed convection, aiding flow heat transfer in a vertical tube, International Journal of Heat and Fluid Flow, vol.24, issue.2, pp.260-266, 2003.

B. A. Kader, Temperature and concentration profiles in fully turbulent boundary layers, International Journal of Heat and Mass Transfer, vol.24, issue.9, pp.1541-1544, 1981.

, Référence, vol.185

J. K. Korese, B. Sturm, F. Román, and O. Hensel, Simulation of transient heat transfer during cooling and heating of whole sweet potato (Ipomoea batatas (L.) Lam.) roots under forced-air conditions, Applied Thermal Engineering, vol.111, pp.1171-1178, 2017.

M. Kotouc, G. Bouchet, and J. Dusek, Transition to turbulence in the wake of a fixed sphere in mixed convection, Journal of Fluid Mechanics, pp.205-248, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01446999

R. Krishnamurthy and B. Gebhart, An experimental study of transition to turbulence in vertical mixed convection flows, Journal of Heat Transfer, vol.111, issue.1, pp.121-130, 1989.

R. Kumar, A. Kumar, and U. Narayana-murthy, Heat transfer during forced air precooling of perishable food products, Biosystems Engineering, vol.99, issue.2, pp.228-233, 2008.

E. Kupferman, Controlled atmosphere storage of apples and pears. Proceedings of the 8th International Controlled Atmosphere Research Conference, Vols I and Ii, International Society Horticultural Science, vol.1, pp.729-735, 2003.

O. Laguerre, S. Ben-amara, M. C. Charrier-mojtabi, B. Lartigue, and D. Flick, Experimental study of air flow by natural convection in a closed cavity: Application in a domestic refrigerator, Journal of Food Engineering, vol.85, issue.4, pp.547-560, 2008.

O. Laguerre, S. Benamara, and D. Flick, Numerical simulation of simultaneous heat and moisture transfer in a domestic refrigerator, International Journal of Refrigeration, vol.33, issue.7, pp.1425-1433, 2010.

O. Laguerre, S. Duret, H. M. Hoang, L. Guillier, and D. Flick, Simplified heat transfer modeling in a cold room filled with food products, Journal of Food Engineering, vol.149, pp.78-86, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01173940

O. Laguerre and D. Flick, Temperature prediction in domestic refrigerators: Deterministic and stochastic approaches, International Journal of Refrigeration, vol.33, issue.1, pp.41-51, 2010.

O. Laguerre, M. H. Hoang, and D. Flick, Heat transfer modelling in a refrigerated display cabinet: The influence of operating conditions, Journal of Food Engineering, vol.108, issue.2, pp.353-364, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01432620

O. Laguerre, M. H. Hoang, V. Osswald, and D. Flick, Experimental study of heat transfer and air flow in a refrigerated display cabinet, Journal of Food Engineering, vol.113, issue.2, pp.310-321, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01432618

N. Laouche, A. Korichi, C. V. Popa, and G. Polidori, Laminar aiding and opposing mixed convection in a vertical channel with an asymmetric discrete heating at one wall, THERMAL SCIENCE, vol.21, pp.2503-2515, 2017.

L. Bot, C. Bouchet, and G. , Thermal mixed convection past a sphere in an assisting flow, International Journal of Thermal Sciences, vol.65, pp.170-177, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01446963

,. Le-page, C. Chevarin, A. Kondjoyan, J. Daudin, and P. Mirade, Development of an approximate empirical-CFD model estimating coupled heat and Référence ___________________________________________________________________________ 186 water transfers of stacked food products placed in airflow, Journal of Food Engineering, vol.92, issue.2, pp.208-216, 2009.

L. Lu, X. Chen, and J. Wang, Modelling and Thermal Analysis of Tray-layered Fruits inside Ventilated Packages during Forced-air Precooling, Packaging Technology and Science, vol.29, issue.2, pp.105-119, 2016.

P. V. Mahajan and T. K. Goswami, PH-Postharvest Technology: Enzyme Kinetics Based Modelling of Respiration Rate for Apple, Journal of Agricultural Engineering Research, vol.79, issue.4, pp.399-406, 2001.

T. Maré, I. Voicu, and J. Miriel, Numerical and experimental visualization of reverse flow in an inclined isothermal tube, Experimental Thermal and Fluid Science, vol.30, issue.1, pp.9-15, 2005.

M. Mastani-joybari, F. Haghighat, J. Moffat, and P. Sra, Heat and cold storage using phase change materials in domestic refrigeration systems: The state-of-the-art review, Energy and Buildings, vol.106, pp.111-124, 2015.

J. R. Maughan and F. P. Incropera, Experiments on mixed convection heat transfer for airflow in a horizontal and inclined channel, International Journal of Heat and Mass Transfer, vol.30, issue.7, pp.1307-1318, 1987.

M. Merai, D. Flick, L. Guillier, S. Duret, and O. Laguerre, Experimental characterization of airflow inside a refrigerated trailer loaded with carcasses, International Journal of Refrigeration, vol.88, pp.337-346, 2018.

S. Mercier, J. K. Brecht, and I. Uysal, Commercial forced-air precooling of strawberries: A temperature distribution and correlation study, Journal of Food Engineering, vol.242, pp.47-54, 2019.

P. Mirade, B. Perret, H. Guillemin, D. Picque, B. Desserre et al., Quantifying energy savings during cheese ripening after implementation of sequential air ventilation in an industrial cheesemaking plant, Energy, vol.46, issue.1, pp.248-258, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01019500

H. A. Mohammed and Y. K. Salman, Combined convection heat transfer for thermally developing aiding flow in an inclined circular cylinder with constant heat flux, Applied Thermal Engineering, vol.27, issue.8, pp.1236-1247, 2007.

H. A. Mohammed and Y. K. Salman, Experimental investigation of mixed convection heat transfer for thermally developing flow in a horizontal circular cylinder, Applied Thermal Engineering, vol.27, issue.8, pp.1522-1533, 2007.

R. Montanari, Cold chain tracking: a managerial perspective, Trends in Food Science & Technology, vol.19, issue.8, pp.425-431, 2008.

Y. Mori and Y. Uchida, Forced convection heat transfer between horizontal flat plates, Heat Mass Transfer, vol.9, pp.803-817, 1966.

, Référence, vol.187

J. Moureh and E. Derens, Numerical modelling of the temperature increase in frozen food packaged in pallets in the distribution chain, International Journal of Refrigeration, vol.23, issue.7, pp.540-552, 2000.

J. Moureh and D. Flick, Airflow pattern and temperature distribution in a typical refrigerated truck configuration loaded with pallets, International Journal of Refrigeration, vol.27, issue.5, pp.464-474, 2004.

J. Moureh and D. Flick, Airflow characteristics within a slot-ventilated enclosure, International Journal of Heat and Fluid Flow, vol.26, issue.1, pp.12-24, 2005.

J. Moureh, N. Menia, and D. Flick, Numerical and experimental study of airflow in a typical refrigerated truck configuration loaded with pallets, Computers and Electronics in Agriculture, vol.34, issue.1-3, pp.25-42, 2002.

J. Moureh, M. Tapsoba, and D. Flick, Airflow in a slot-ventilated enclosure partially filled with porous boxes: Part I -Measurements and simulations in the clear region, Computers & Fluids, vol.38, issue.2, pp.194-205, 2009.

J. Moureh, M. Tapsoba, and D. Flick, Airflow in a slot-ventilated enclosure partially filled with porous boxes: Part II -Measurements and simulations within porous boxes, Computers & Fluids, vol.38, issue.2, pp.206-220, 2009.

J. Moureh, S. Tapsoba, E. Derens, and D. Flick, Air velocity characteristics within vented pallets loaded in a refrigerated vehicle with and without air ducts, International Journal of Refrigeration, vol.32, issue.2, pp.220-234, 2009.

M. Nakajama, K. Fukui, and H. Ueda, Buoyancy effects on turbulent transport in combined free and forced convection between vertical parallel plates, Int. J. Heat, pp.1325-1336, 1980.

H. K. Navaz, B. S. Henderson, R. Faramarzi, A. Pourmovahed, and F. Taugwalder, Jet entrainment rate in air curtain of open refrigerated display cases, International Journal of Refrigeration, vol.28, issue.2, pp.267-275, 2005.

N. Ndraha, H. Hsiao, J. Vlajic, M. Yang, and H. V. Lin, Time-temperature abuse in the food cold chain: Review of issues, challenges, and recommendations, Food Control, vol.89, pp.12-21, 2018.

N. Ndraha, W. Sung, and H. Hsiao, Evaluation of the cold chain management options to preserve the shelf life of frozen shrimps: A case study in the home delivery services in Taiwan, Journal of Food Engineering, vol.242, pp.21-30, 2019.

M. E. Ngcobo, M. A. Delele, U. L. Opara, and C. J. Meyer, Performance of multi-packaging for table grapes based on airflow, cooling rates and fruit quality, Journal of Food Engineering, vol.116, issue.2, pp.613-621, 2013.

M. E. Ngcobo, M. A. Delele, U. L. Opara, C. J. Zietsman, and C. J. Meyer, Resistance to airflow and cooling patterns through multi-scale packaging of table grapes, International Journal of Refrigeration, vol.35, issue.2, pp.445-452, 2012.

, Référence, vol.188

M. E. Ngcobo, U. L. Opara, and G. D. Thiart, Effects of packaging liners on cooling rate and quality attributes of table grape (cv. Regal seedless), Packaging Technology and Science, pp.73-84, 2012.

J. O'sullivan, Significant factors affecting the forced-air cooling process of polylined horticultureal produce, 2016.

J. O'sullivan, M. J. Ferrua, R. Love, P. Verboven, B. Nicolai et al., Modelling the forced-air cooling mechanisms and performance of polylined horticultural produce, Postharvest Biology and Technology, vol.120, pp.23-35, 2016.

J. O'sullivan, M. Ferrua, R. Love, P. Verboven, B. Nicolaï et al., Airflow measurement techniques for the improvement of forced-air cooling, refrigeration and drying operations, Journal of Food Engineering, vol.143, pp.90-101, 2014.

J. O'sullivan, M. J. Ferrua, R. Love, P. Verboven, B. Nicolaï et al., Modelling the forced-air cooling mechanisms and performance of polylined horticultural produce, Postharvest Biology and Technology, vol.120, pp.23-35, 2016.

J. L. O'sullivan, M. J. Ferrua, R. Love, P. Verboven, B. Nicolaï et al., Forced-air cooling of polylined horticultural produce: Optimal cooling conditions and package design, Postharvest Biology and Technology, vol.126, pp.67-75, 2017.

J. Oignet, J. Gahartian, F. T. Ndoye, and A. Delahaye, Mise au point d'un dispositif de calorimétrie pour la mesure de flux de chaleur dégagés au cours de l'entreposage de fromages, 2017.

J. L. Page, C. Chevarin, A. Kondjoyan, J. Daudin, and P. Mirade, Development of an approximate empirical-CFD model estimating coupled heat and water transfers of stacked food products placed in airflow, J. Food Eng, pp.208-216, 2009.

S. H. Park, Y. H. Kim, Y. S. Kim, Y. G. Park, and M. Y. Ha, Numerical study on the effect of different hole locations in the fan case on the thermal performance inside a gas oven range, Applied Thermal Engineering, vol.137, pp.123-133, 2018.

P. B. Pathare, U. L. Opara, C. Vigneault, M. A. Delele, and F. A. Al-said, Design of packaging vents for cooling fresh horticultural produce, Food Bioprocess Technol, pp.2031-2045, 2012.

B. S. Petukhov and A. F. Polyakov, Turbulent Mixed Convection Heat Transfer, 1986.

A. T. Pham, J. Moureh, and D. Flick, Experimental characterization of airflow within a pallet of product generating heat, Applied Thermal Engineering, 2019.

A. T. Pham, J. Moureh, and D. Flick, Experimental characterization of heat transfer within a pallet of product generating heat, Journal of Food Engineering, vol.247, pp.115-125, 2019.

P. Poskas, R. Poskas, A. Sirvydas, and A. Smaizys, Experimental investigation of opposing mixed convection hear transfer in the vertical flat channel in a laminarregion, International Journal of Heat and Mass Transfer, vol.54, issue.1, pp.662-668, 2011.

R. Pravesh, A. Dhiman, and R. P. Bharti, Aiding buoyancy mixed convection flow and thermal features across a periodic array of heated cylinders, International Journal of Heat and Mass Transfer, vol.130, pp.1141-1162, 2019.

T. V. Radhakrishnan, A. K. Verma, C. Balaji, and S. P. Venkateshan, An experimental and numerical investigation of mixed convection from a heat generating element in a ventilated cavity, Experimental Thermal and Fluid Science, vol.32, issue.2, pp.502-520, 2007.

G. P. Redding, A. Yang, Y. M. Shim, J. Olatunji, and A. East, A review of the use and design of produce simulators for horticultural forced-air cooling studies, Journal of Food Engineering, vol.190, pp.80-93, 2016.

M. S. Reid, Effects of low temperature on ornamental plants, Acta Hort, pp.215-222, 1991.

A. Roccato, M. Uyttendaele, and J. Membré, Analysis of domestic refrigerator temperatures and home storage time distributions for shelf-life studies and food safety risk assessment, Food Research International, vol.96, pp.171-181, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01605945

S. Gowda, B. Narasimham, G. S. , K. Murthy, and M. V. , Forcedair precooling of spherical foods in bulk: A parametric study, International Journal of Heat and Fluid Flow, vol.18, issue.6, pp.613-624, 1997.

B. Sarper, M. Saglam, and O. Aydin, Experimental and numerical investigation of natural convection in a discretely heated vertical channel: Effect of the blockage ratio of the heat sources, International Journal of Heat and Mass Transfer, vol.126, pp.894-910, 2018.

F. R. Senti and R. L. Rizek, Nutrient levels in horticultural crops, HortScience, vol.10, p.243, 1975.

T. Shih, W. W. Liou, A. Shabbir, Z. Yang, and J. Zhu, A new k-? eddy viscosity model for high reynolds number turbulent flows, Computers & Fluids, vol.24, issue.3, pp.227-238, 1995.

N. J. Smale, Mathematical modelling of airflow in shipping systems: model development and testing, 2004.

N. J. Smale, J. Moureh, and G. Cortella, A review of numerical models of airflow in refrigerated food applications, International Journal of Refrigeration, vol.29, issue.6, pp.911-930, 2006.

N. J. Smale, D. J. Tanner, N. D. Amos, and D. J. Cleland, Airflow properties of packaged horticultural produce -A practical study, Acta Horticulturae, vol.599, pp.443-450, 2003.

S. Sumon, S. Goutam, A. Mohammad, . Md, and I. Quamrul, Combined free and forced convection inside a two-dimensional multiple ventilated rectangular enclosure, ARPN Journal of Engineering and Applied Sciences, vol.1, issue.1, 2016.

_. Référence,

S. G. Taji, G. V. Parishwad, and N. K. Sane, Enhanced performance of horizontal rectangular fin array heat sink using assisting mode of mixed convection, International Journal of Heat and Mass Transfer, vol.72, pp.250-259, 2014.

D. J. Tanner, A. C. Cleland, and L. U. Opara, A generalised mathematical modelling methodology for the design of horticultural food packages exposed to refrigerated conditions Part 2. Heat transfer modelling and testing, International Journal of Refrigeration, vol.25, issue.1, pp.43-53, 2002.

M. Tapsoba, J. Moureh, and D. Flick, Airflow patterns inside slotted obstacles in a ventilated enclosure, Computers & Fluids, vol.36, issue.5, pp.935-948, 2007.

S. A. Tassou, Y. Ge, A. Hadawey, and D. Marriott, Energy consumption and conservation in food retailing, Applied Thermal Engineering, vol.31, issue.2, pp.147-156, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00692330

A. K. Thompson, Postharvest technology of fruit and vegetables, 1996.

A. K. Thompson, Fruit and Vegetables: Harvesting, Handling and Storage, 2003.

J. Thompson and Y. Chen, Comparative energy use of vacuum, hydro, and forced air coolers for fruits and vegetables, ASHRAE Trans, vol.94, pp.1427-1433, 1988.

C. Tian, J. Wang, X. Cao, C. Yan, and A. A. Ala, Experimental study on mixed convection in an asymmetrically heated, inclined, narrow, rectangular channel, International Journal of Heat and Mass Transfer, vol.116, pp.1074-1084, 2018.

M. Toulouse, Analyse et caractérisation de la convection naturelle et de la convection mixte dans des enceintes confinées, 2004.

M. Tutar, F. Erdogdu, and B. Toka, Computational modeling of airflow patterns and heat transfer prediction through stacked layers' products in a vented box during cooling, International Journal of Refrigeration, vol.32, issue.2, pp.295-306, 2009.

R. G. Van-der-sman, Prediction of airflow through a vented box by the Darcy-Forchheimer equation, Journal of Food Engineering, vol.55, issue.1, pp.49-57, 2002.

P. Verboven, D. Flick, B. M. Nicolaï, and G. Alvarez, Modelling transport phenomena in refrigerated food bulks, packages and stacks: basics and advances, International Journal of Refrigeration, vol.29, issue.6, pp.985-997, 2006.

P. Verboven, M. L. Hoang, M. Baelmans, and B. M. Nicola??, Airflow through Beds of Apples and Chicory Roots, Biosystems Engineering, vol.88, issue.1, pp.117-125, 2004.

C. Vigneault, B. Goyette, and L. R. De-castro, Maximum slat width for cooling efficiency of horticultural produce in wooden crates, Postharvest Biology and Technology, vol.40, issue.3, pp.308-313, 2006.

_. Référence,

C. Vigneault, L. R. Castro, B. G. Markarian, N. R. Charles, M. T. Bourgeois et al., Indirect airflow distribution measurement method for horticultural crop package design, Canadian Biosystems Engineering, vol.335, pp.13-22, 2007.

C. Vigneault, J. Thompson, S. Wu, K. P. Hui, and D. I. Leblanc, Transportation of fresh horticultural produce, Postharvest Technologies for Horticultural Crops, vol.2, pp.1-24, 2009.

S. Villeneuve, F. Mercier, J. P. Emond, and C. Nunes, Amélioration de l'utilisation des comptoirs pour l'étalage des fruits et légumes. Rapport Final, 1999.

R. B. Waghmare, P. V. Mahajan, and U. S. Annapure, Modelling the effect of time and temperature on respiration rate of selected fresh-cut produce, Postharvest Biology and Technology, vol.80, pp.25-30, 2013.

W. Wu, P. Cronjé, B. Nicolai, P. Verboven, U. Linus-opara et al., Virtual cold chain method to model the postharvest temperature history and quality evolution of fresh fruit -A case study for citrus fruit packed in a single carton, Computers and Electronics in Agriculture, vol.144, pp.199-208, 2018.

W. Wu and T. Defraeye, Identifying heterogeneities in cooling and quality evolution for a pallet of packed fresh fruit by using virtual cold chains, Applied Thermal Engineering, vol.133, pp.407-417, 2018.

W. Wu, P. Häller, P. Cronjé, and T. Defraeye, Full-scale experiments in forced-air precoolers for citrus fruit: Impact of packaging design and fruit size on cooling rate and heterogeneity, Biosystems Engineering, vol.169, pp.115-125, 2018.

K. Zhang, Y. Pu, and D. Sun, Recent advances in quality preservation of postharvest mushrooms (Agaricus bisporus): A review, Trends in Food Science & Technology, vol.78, pp.72-82, 2018.

C. Zhao, J. Han, X. Yang, J. Qian, and B. Fan, A review of computational fluid dynamics for forced-air cooling process, Applied Energy, vol.168, pp.314-331, 2016.

Q. Zou, L. U. Opara, and R. Mckibbin, A CFD modeling system for airflow and heat transfer in ventilated packaging for fresh foods: I. Initial analysis and development of mathematical models, Journal of Food Engineering, vol.77, issue.4, pp.1037-1047, 2006.

Q. Zou, L. U. Opara, and R. Mckibbin, A CFD modeling system for airflow and heat transfer in ventilated packaging for fresh foods:: II. Computational solution, software development, and model testing, Journal of Food Engineering, vol.77, issue.4, pp.1048-1058, 2006.

A. Ambaw, N. Bessemans, W. Gruyters, S. G. Gwanpua, A. Schenk et al.,

P. Delele, B. M. Verboven, and . Nicolai, Analysis of the spatiotemporal temperature fluctuations inside an apple cool store in response to energy use concerns, International Journal of Refrigeration, vol.66, pp.156-168, 2016.

S. H. Ho, L. Rosario, and M. M. Rahman, Numerical simulation of temperature and velocity in a refrigerated warehouse, International Journal of Refrigeration, vol.33, issue.5, pp.1015-1025, 2010.

, Two inflow air velocities (u=0.31m/s and 0.71m/s) and three heat generating (q=0.05W, 0.15W and 0.30W per product of 0.25kg) were chosen. The range of Richardson number in warehouse

G. Alvarez and D. Flick, Analysis of heterogeneous cooling of agricultural products inside bins: Part II: thermal study, Journal of Food Engineering, vol.39, issue.3, pp.239-245, 1999.

A. Ambaw, N. Bessemans, W. Gruyters, S. G. Gwanpua, A. Schenk et al.,

S. Sumon, S. Goutam, A. Mohammad, I. Md, and . Quamrul, Combined free and forced convection inside a two-dimensional multiple ventilated rectangular enclosure, ARPN Journal of Engineering and Applied Sciences, vol.1, issue.1, 2016.