, Chapitre I Développement d'un protocole expérimental pour la génération de ruptures conformes dans l'essai de traction sur l'UD

I. , Simulations aux Eléments Finis de l'essai de traction quasi-statique

, Vérification expérimentale des paramètres optimisés par simulation numérique

I. , Etude de la capacité d'une nouvelle configuration d'essai optimisée à générer des ruptures en mode fibre et en zone utile

, Analyse statistique des valeurs à rupture

I. , Application de la méthodologie développée aux essais de fatigue

, Chapitre II Caractérisation de l'endommagement, durées de vie et performances résiduelles de l'UD

, Limites et difficultés des EA sur l'UD en fibres de carbone

, 7. 1. Classification par l'algorithme des K-means à centres mobiles

R. .. , 7. 6. Comparaison de l'énergie acoustique entre les essais de type A et B

B. .. , Suivi de l'évolution en fatigue de la rigidité longitudinale

, 1. Synthèse bibliographique des mécanismes d'endommagement et leur modélisation, Chapitre III Modélisation des mécanismes d'endommagement et rupture de l'

, 3. 1. Description du Volume Elémentaire représentatif (VER)

, 5. 1. Etude du profil des surcontraintes dans le plan de rupture, à iso-V f

. .. , 114 III. 8. Modes de chargement de l'interface fibre/matrice sous sollicitation quasi-statique et de fatigue, Sur la complémentarité entre deux mécanismes de ruptures de fibres

, Probabilité de rupture d'une fibre sous contrainte hétérogène

, Chapitre IV Comportement des plis à 0° dans des stratifiés multidirectionnels sous sollicitations de fatigue

, Endommagement et rupture du stratifié

, Identification de la signature acoustique de la fissuration matricielle

.. .. Conclusion,

A. Annexe and .. .. De-la-chaîne-acoustique,

B. Annexe and V. .. De-périodicité-du,

C. Annexe, Tenseur des contraintes dans une fibre voisine à celle rompue

. .. Références,

, Chapitre II Caractérisation de l'endommagement, durées de vie et performances résiduelles de l'UD en fatigue Sommaire II. 1. Synthèse bibliographique des principales études existantes

, Limites et difficultés des EA sur l'UD en fibres de carbone

, 7. 1. Classification par l'algorithme des K-means à centres mobiles

.. .. Résultat-de-la-classification,

, Identification de la signature acoustique du bruit

, Classification par l'algorithme des K-means à 1 centre imposé

, Classification par modèle de mélange gaussien

, 58 Classification probabiliste basée sur le modèle de mélange gaussien

R. .. , 7. 6. Comparaison de l'énergie acoustique entre les essais de type A et B

B. .. , Suivi de l'évolution en fatigue de la rigidité longitudinale

I. Sommaire, 1. Synthèse bibliographique des mécanismes d'endommagement et leur modélisation

, 3. 1. Description du Volume Elémentaire représentatif (VER)

. .. Fibre,

. .. Matrice, Estimation de la surcontrainte au bord de la fibre voisine

. .. , 114 III. 8. Modes de chargement de l'interface fibre/matrice sous sollicitation quasi-statique et de fatigue, Sur la complémentarité entre deux mécanismes de ruptures de fibres

, Probabilité de rupture d'une fibre sous contrainte hétérogène

I. V. Sommaire, Endommagement et rupture du stratifié [0 2 30 -30 0] s

, Endommagement et rupture du stratifié

, Identification de la signature acoustique de la fissuration matricielle

, En plus, on constate une dégradation des plis à 0°, avec des fibres et des paquets de fibres cassés et détachés de l'éprouvette, phénomène similaire, mais de plus faible intensité que celui observé en fatigue sur l'UD (Figure II-30

. Bourchak, Les fissures matricielles n'influencent pas directement le comportement (global) des plis à 0° dans ce stratifié, mais favorisent le délaminage, phénomène d'endommagement qui le [0] 4 (2647 MPa, Tableau I-2). Les valeurs pour le cycle 1 correspondent à la contrainte à rupture statique des plis à 0° : plus en détail, 2462 MPa pour les plis à 0° un type d'endommagement (Ammar, celles-ci semblent être similaires à celles observées sur l, 2007.

, En correspondance de ce ?T, des pics d'événements acoustiques sont enregistrés. Ces EA sont assez énergétiques, caractérisés par amplitude et durée élevées, comme montré sur la Figure IV-19. Ce phénomène se répète chaque fois qu'une nouvelle fissure se crée, la signature acoustique associée est plutôt constante : amplitude saturée à 100 dB (seuil supérieur d'enregistrement de la chaîne de mesure), énergie entre 10 8 et 10 10 aJ, durée entre 10 4 et 10 5 ?s. Par contre, les ruptures de fibres identifiées dans le Chapitre II sur l'UD présentent les paramètres acoustiques suivants : amplitude moyenne de 85 dB, énergie moyenne de 'empilement dans lequel ils sont insérés. Ainsi, faire tout d'abord des essais sur UD semble être une étape nécessaire. Ensuite, il faudra trouver un stratifié MD où, s : grâce au nombre important de plis à 90° adjacents, les fissures sont plus facilement identifiables car elles s'étendent sur un nombre plus grand des plis. L'essai P3-0-1, décrit dans la section IV. 3. 1, a été instrumenté avec une caméra thermique visant la surface de l'éprouvette, et avec deux capteurs d'émissions acoustiques. Ces deux instrumentations ont été synchronisées dans le temps

, Enfin, l'étape suivante consiste au passage à l'empilement quasi-isotrope, situation plus complexe

M. L. Accorsi, A. Pegoretti, and A. T. Dibenedetto, Dynamic analysis of fibre breakage in single-and multiple-fibre composites, Journal of Materials Science, vol.31, pp.4181-4187, 1996.

,

M. Alves and S. Pimenta, A computationally-efficient micromechanical model for the fatigue life of unidirectional composites under tension-tension loading, International Journal of Fatigue, vol.116, pp.677-690, 2018.

M. Alves and S. Pimenta, Predicting the fatigue life of UD Composites. Presented at the ICFC7, Vicenza, 2018.

I. B. Ammar, Contrôle de santé vibro-acoustique de l'endommagement des matériaux composites à base polymère pour l'aéronautique, 2014.

P. J. Armstrong and C. O. Frederick, A mathematical representation of the multiaxial Bauschinger effect, Central Electricity Generating Board, p.41, 1966.

L. E. Asp, L. A. Berglund, and R. Talreja, A criterion for crack initiation in glassy polymers subjected to a composite-like stress state, Composites Science and Technology, vol.56, pp.1291-1301, 1996.

, D 3039/D 3039M -Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM, 2014.

, D 3479/D 3479M -Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials, ASTM, 2002.

P. B. Bailey and A. D. Lafferty, Specimen gripping effects in composites fatigue testing --Concerns from initial investigation, Express Polymer Letters, vol.9, pp.480-488, 2015.

,

S. B. Batdorf, Tensile Strength of Unidirectionally Reinforced Composites I 12, 1981.

G. Belingardi, D. S. Paolino, and E. G. Koricho, Investigation of influence of tab types on tensile strength of E-glass/epoxy fiber einforced composite materials, Procedia Engineering, vol.10, pp.3279-3284, 2011.

J. Besson, G. Cailletaud, J. Chaboche, and S. Forest, Non-Linear Mechanics of Materials, Solid Mechanics and Its Applications, 2010.

S. Blassiau, Modélisation des phénomènes microstructuraux au sein d'un composite unidirectionnel carbone/epoxy et prédiction de durée de vie : contrôle et qualification de réservoirs bobines, 2005.

M. Bourchak, I. Farrow, I. Bond, C. Rowland, and F. Menan, Acoustic emission energy as a fatigue damage parameter for CFRP composites, International Journal of Fatigue, vol.29, pp.457-470, 2007.

A. Bowman and A. Azzalini, Applied Smoothing Techniques for Data Analysis: The Kernel Approach with S-PLUS Illustrations, 1997.

G. Bullegas, High-toughness Carbon Fibre Composites. Presented at the Comptest2017, pp.5-7, 2017.

A. R. Bunsell and A. Somer, The tensile and fatigue behaviour of carbon fibres, Plastics, Rubber and Composites Processing and Applications, vol.18, 1992.

D. Caous, P. A. Carraro, and M. Quaresimin, Rôle de l'endommagement sur la durée de vie en fatigue des matériaux composites stratifiés : application au domaine éolien, Composites Part A: Applied Science and Manufacturing, vol.61, pp.33-42, 2014.

,

G. Casella and R. Berger, Statistical Inference, 2001.

J. Castelloe, Sample Size Computations and Power Analysis with the SAS System 8, 2000.

J. Castiñeira-merino, Lissajous Figures and Chebyshev Polynomials, vol.32, pp.122-127, 2003.

J. L. Chaboche, A review of some plasticity and viscoplasticity constitutive theories, International Journal of Plasticity, vol.24, pp.1642-1693, 2008.

J. Chevalier, X. P. Morelle, C. Bailly, P. P. Camanho, T. Pardoen et al., Micro-mechanics based pressure dependent failure model for highly cross-linked epoxy resins, Engineering Fracture Mechanics, vol.158, pp.1-12, 2016.

J. Chevalier, X. P. Morelle, P. P. Camanho, F. Lani, and T. Pardoen, On a unique fracture micromechanism for highly cross-linked epoxy resins, Journal of the Mechanics and Physics of Solids, vol.122, pp.502-519, 2019.

H. Y. Chou, Damage Analysis of Composite Pressure Vessels Using Acoustic Emission Monitoring, 2011.

E. Correa, F. París, and V. Manti?, Effect of the presence of a secondary transverse load on the inter-fibre failure under tension, Engineering Fracture Mechanics, vol.103, pp.174-189, 2013.

J. M. Corum, W. A. Simpson, C. T. Sun, R. Talreja, and Y. J. Weitsman, Durability of polymer matrix composites for automotive structural applications: A state-of-the-art review, vol.95282, p.6869, 1995.

V. A. Cuartas, Identification de mécanismes d'endommagement de stratifiés carbone-epoxyde par couplage de l'émission acoustique et de la thermographie infrarouge, 2015.

P. Curtis, Tensile fatigue mechanisms in unidirectional polymer matrix composite materials, International Journal of Fatigue, vol.13, pp.377-382, 1991.

I. De-baere, W. Van-paepegem, and J. Degrieck, On the design of end tabs for quasi-static and fatigue testing of fibre-reinforced composites, Polymer Composites, vol.30, pp.381-390, 2009.

J. Degrieck and W. V. Paepegem, Fatigue Damage Modelling of Fibre-reinforced Composite Materials: Review 32, 2001.

D. Norm, DIN EN 2561 -Tensile test parallel to fibre direction, 1995.

F. Devries and F. Léné, Homogenization at set macroscopic stress: numerical implementation and application, 1987.

D. D. Doan, E. Ramasso, V. Placet, S. Zhang, L. Boubakar et al., An unsupervised pattern recognition approach for AE data originating from fatigue tests on polymer-composite materials. Mechanical Systems and Signal Processing 64-65, pp.465-478, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01021059

,

A. Doitrand, C. Fagiano, F. Hild, V. Chiaruttini, A. Mavel et al., Mesoscale analysis of damage growth in woven composites, Composites Part A: Applied Science and Manufacturing, vol.96, pp.77-88, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01480982

S. Dutton, D. Kelly, and A. Baker, Composite Materials for Aircraft Structures, Second Edition, 2004.

V. J. Easton, J. H. Mccoll, G. V. Guinea, J. Gómez, and J. Planas, The cohesive zone model: advantages, limitations and challenges, Statistics Glossary v1.1. Elices, vol.69, pp.83-85, 1997.

M. Fuwa, B. Harris, and A. R. Bunsell, Acoustic emission during cyclic loading of carbon-fibrereinforced plastics, Journal of Physics D: Applied Physics, vol.8, pp.1460-1471, 1975.

E. K. Gamstedt, Effects of debonding and fiber strength distribution on fatigue-damage propagation in carbon fiber-reinforced epoxy, Journal of Applied Polymer Science, pp.457-474, 2000.

S. C. Garcea, Micromechanism characterisation of fatigue in carbon fibre reinforced polymers using synchrotron X-ray computed tomography, 2015.

S. C. Garcea, I. Sinclair, and S. M. Spearing, Fibre failure assessment in carbon fibre reinforced polymers under fatigue loading by synchrotron X-ray computed tomography, Composites Science and Technology, vol.133, pp.157-164, 2016.

S. C. Garcea, I. Sinclair, S. M. Spearing, and P. J. Withers, Mapping fibre failure in situ in carbon fibre reinforced polymers by fast synchrotron X-ray computed tomography, Composites Science and Technology, vol.149, pp.81-89, 2017.

I. G. García, M. Paggi, and V. Manti?, Fiber-size effects on the onset of fiber-matrix debonding under transverse tension: A comparison between cohesive zone and finite fracture mechanics models, Engineering Fracture Mechanics, vol.115, pp.96-110, 2014.

,

D. Garoz, F. A. Gilabert, R. D. Sevenois, S. W. Spronk, and W. Van-paepegem, Consistent application of periodic boundary conditions in implicit and explicit finite element simulations of damage in composites, Composites Part B: Engineering, vol.168, pp.254-266, 2019.

,

, Gaussian Mixture Models, MATLAB [WWW Document], 2018.

M. U. Ghani, F. Mesadi, S. D. Kan?k, A. Ö. Argun?ah, A. F. Hobbiss et al., Dendritic spine classification using shape and appearance features based on two-photon microscopy, Journal of Neuroscience Methods, vol.279, pp.13-21, 2017.

,

C. González and J. Llorca, Micromechanical modelling of deformation and failure in Ti-6Al-4V/SiC composites, Acta Materialia, vol.49, issue.01, pp.246-250, 2001.

S. Goutianos and T. Peijs, Experimental and numerical investigation into fatigue damage mechanisms in multifibre composites. Plastic, Rubber and Composites 30, 2001.

D. G. Harlow and S. L. Phoenix, Probability distributions for the strength of composite materials II: A convergent sequence of tight bounds, International Journal of Fracture, vol.17, pp.601-630, 1981.

J. M. Hedgepeth, Stress concentrations in filamentary structures. NASA Technical Note D-882, 1961.

P. J. Herrera-franco and L. T. Drzal, Comparison of methods for the measurement of fibre/matrix adhesion in composites, Endommagement, rupture et changements d'échelles dans les matériaux hétérogènes. Mémoire d'habilitation à diriger des recherches, vol.23, pp.2-27, 1992.

F. Hild, P. Forquin, and A. R. Cordeiro-da-silva, Single and multiple fragmentation of brittle geomaterials 31, 2002.

M. Hiley, AG-20 Fractographic Aspects of Fatigue Failure in Composite Materials (No. GARTEUR FINAL REPORT TP 112), GROUP FOR AERONAUTICAL RESEARCH AND TECHNOLOGY IN EUROPE, 2001.

T. Hobbiebrunken, B. Fiedler, M. Hojo, S. Ochiai, and K. Schulte, Microscopic yielding of CF/epoxy composites and the effect on the formation of thermal residual stresses, Composites Science and Technology, vol.65, pp.1626-1635, 2005.

M. Hojo, Y. Sawada, and H. Miyairi, Influence of clamping method on tensile properties of unidirectional CFRP in 0° and 90° directions -round robin activity for international standardization in Japan, Composites, vol.25, pp.90139-90141, 1994.

C. O. Horgan, The remarkable Gent constitutive model for hyperelastic materials, International Journal of Non-Linear Mechanics, vol.68, pp.9-16, 2015.

Z. Huang and Y. Zhou, Advanced Topics in Science and Technology in China, Strength of Fibrous Composites, pp.145-235, 2012.

,

C. Huchette, Sur la complémentarité des approches expérimentales et numériques pour la modélisation des mécanismes d'endommagement des composites stratifiés, 2005.

F. Islam, S. Joannes, S. Bucknell, Y. Leray, and A. Bunsell, Towards accurate and efficient single fibre characterization to better assess failure strength distribution, ECCM18 -18th European Conference on Composite Materials, pp.24-28, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01958211

K. Kang, D. Lim, and J. Kim, Probabilistic analysis for the fatigue life of carbon/epoxy laminates, Composite Structures, vol.85, pp.258-264, 2008.

,

M. Kawai, A phenomenological model for off-axis fatigue behavior of unidirectional polymer matrix composites under different stress ratios, Composites Part A: Applied Science and Manufacturing, vol.35, pp.955-963, 2004.

M. Kawai and K. Yano, Anisomorphic constant fatigue life diagrams of constant probability of failure and prediction of P-S-N curves for unidirectional carbon/epoxy laminates, International Journal of Fatigue, vol.83, pp.323-334, 2016.

M. Kharrat, E. Ramasso, V. Placet, and M. L. Boubakar, A signal processing approach for enhanced Acoustic Emission data analysis in high activity systems: Application to organic matrix composites. Mechanical Systems and Signal Processing 70-71, pp.1038-1055, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01303394

M. Kristan, A. Leonardis, and D. Sko?aj, Multivariate online kernel density estimation with Gaussian kernels, Pattern Recognition, vol.44, pp.2630-2642, 2011.

,

J. Labarere, Principe des tests statistiques d'hypothèse, 2011.

J. Lankford, Compressive failure of fibre-reinforced composites: buckling, kinking, and the role of the interphase, Journal of Materials Science, vol.30, pp.4343-4348, 1995.

,

F. Laurin, Approche multiéchelle des mécanismes de ruine progressive des matériaux stratifiés et analyse de la tenue de structures composites, 2005.

F. Laurin, N. Carrère, and J. Maire, A multiscale progressive failure approach for composite laminates based on thermodynamical viscoelastic and damage models, Composites Part A: Applied Science and Manufacturing, vol.38, pp.198-209, 2007.

,

N. Laws and G. J. Dvorak, Progressive Transverse Cracking In Composite Laminates, Journal of Composite Materials, vol.22, pp.900-916, 1988.

N. Legrand, Fatigue des composites à matrice métallique base titane à renfort unidirectionnel de fibres SiC, 1997.

D. Leguillon, Strength or toughness? A criterion for crack onset at a notch, European Journal of Mechanics -A/Solids, vol.21, pp.1184-1190, 2002.

J. Lemaître, J. L. Chaboche, P. Dunod, and M. Lévesque, L'essai de traction de matériaux composites unidirectionnels à fibres continues, 1985.

S. Mahesh, S. L. Phoenix, and I. J. Beyerlein, Strength distributions and size effects for 2D and 3D composites with Weibull fibers in an elastic matrix 45, 2002.

J. F. Maire and F. H. Leroy, , 2003.

V. Malolan, G. Wuriti, A. S. Srinivasa-gopal, and T. Thomas, Comparison of acoustic emission parameters for fiber breakage and de-lamination failure mechanisms in carbon epoxy composites, Journal of Engineering and Technology Research, vol.8, pp.21-30, 2016.

V. Manti?, Interface crack onset at a circular cylindrical inclusion under a remote transverse tension, International Journal of Solids and Structures, vol.46, pp.1287-1304, 2009.

V. Manti? and I. G. García, Crack onset and growth at the fibre-matrix interface under a remote biaxial transverse load. Application of a coupled stress and energy criterion, International Journal of Solids and Structures, vol.49, pp.2273-2290, 2012.

J. P. Marquez, Fourier analysis and automated measurement of cell and fiber angular orientation distributions, International Journal of Solids and Structures, vol.43, pp.6413-6423, 2006.

A. M. Mazen, M. Hemmasi, and M. F. Lewis, Search of Power: A Statistical Power Analysis of Contemporary Research in Strategic Management. Academy of Management Proceedings, pp.30-34, 1985.

G. Mclachlan and D. Peel, Finite Mixture Models, 2000.

Y. Meziere, A. R. Bunsell, Y. Favry, J. Teissedre, and A. T. Do, Large strain cyclic fatigue testing of unidirectional carbon fibre reinforced epoxy resin, Composites Part A: Applied Science and Manufacturing, vol.36, pp.1627-1636, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00156833

M. Handbook, Polymer Matrix Composites Guidelines for Characterization of Structural Materials -U.S. Department of Defense, vol.1, 2002.

B. Miller, P. Muri, and L. Rebenfeld, A microbond method for determination of the shear strength of a fiber/resin interface, Composites Science and Technology, vol.28, pp.17-32, 1987.

B. Mills-dadson, D. Tran, K. Asamene, T. Whitlow, and M. Sundaresan, Acoustic emission monitoring of unstable damage growth in CFRP composites under tension. Presented at the 43RD ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, vol.36, p.70009, 2017.

M. Paristech and . Onera, Zébulon. Mistras Goup, 2011. Guide d'utilisateur AEWin, 2018.

L. Molliex, Approche micromécanique de la résistance en traction de composites à matrice métallique, 1995.

M. Naderi and A. R. Maligno, Fatigue life prediction of carbon/epoxy laminates by stochastic numerical simulation, Composite Structures, vol.94, pp.1052-1059, 2012.

,

M. R. Nedele and M. R. Wisnom, Stress concentration factors around a broken fibre in a unidirectional carbon fibre-reinforced epoxy, Composites, vol.25, pp.549-557, 1994.

V. -x-nguyen, F. Lani, T. Pardoen, X. P. Morelle, and L. Noels, A large strain hyperelastic viscoelastic-viscoplastic-damage constitutive model based on a multi-mechanism non-local damage continuum for amorphous glassy polymers, International Journal of Solids and Structures, vol.96, pp.192-216, 2016.

S. Ogihara, Y. Imafuku, R. Yamamoto, and Y. Kogo, Direct evaluation of fracture toughness in a carbon fiber 10, 2010.

K. Ono, Acoustic Emission Behavior of Flawed Unidirectional Carbon Fiber-Epoxy Composites, Journal of Reinforced Plastics and Composites, vol.7, pp.90-105, 1988.

S. Pimenta and S. T. Pinho, Hierarchical scaling law for the strength of composite fibre bundles, Journal of the Mechanics and Physics of Solids, vol.61, pp.1337-1356, 2013.

,

E. Pisanova, S. Zhandarov, E. Mäder, I. Ahmad, and R. J. Young, Three techniques of interfacial bond strength estimation from direct observation of crack initiation and propagation in polymer-fibre systems, Composites Part A: Applied Science and Manufacturing, vol.32, pp.435-443, 2001.

A. Pupurs, S. Goutianos, P. Brondsted, and J. Varna, Interface debond crack growth in tensiontension cyclic loading of single fiber polymer composites, Composites Part A: Applied Science and Manufacturing, vol.44, pp.86-94, 2013.

E. Ramasso, V. Placet, and M. L. Boubakar, Unsupervised Consensus Clustering of Acoustic Emission Time-Series for Robust Damage Sequence Estimation in Composites, IEEE Transactions on Instrumentation and Measurement, vol.64, pp.3297-3307, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01303539

,

N. Revest, Comportement en fatigue de pièces épaisses en matériaux composites, 2011.

M. Rodríguez, J. M. Molina-aldareguía, C. González, and J. Llorca, A methodology to measure the interface shear strength by means of the fiber push-in test, Composites Science and Technology, vol.72, pp.1924-1932, 2012.

M. Romanowicz, Effect of interfacial debonding on the failure behavior in a fiber-reinforced composite subjected to transverse tension, Computational Materials Science, vol.47, pp.225-231, 2009.

B. W. Rosen, Tensile failure of fibrous composites, AIAA Journal, vol.2, 1964.

S. Rosini, M. N. Mavrogordato, I. Sinclair, and S. M. Spearing, Understanding the damage accumulation and tensile strength in carbon/epoxy composites using high resolution, vol.7, 2018.

P. J. Rousseeuw and A. M. Leroy, Robust regression and outlier detection, Wiley series in probability and mathematical statistics, 1987.

G. Rousset, Approche probabiliste de la durée de vie d'un composite unidirectionnel à matrice mètallique en fatigue oligocyclique axiale, 2008.

M. J. Salkind, Fatigue of Composites, Composite Materials: Testing and Design (Second Conference, 1972.

E. Sanchez-palencia, Homogenization method for the study of composite media, Asymptotic Analysis, pp.192-214, 2006.

J. Schindelin, I. Arganda-carreras, E. Frise, V. Kaynig, M. Longair et al., Fiji: an open-source platform for biological-image analysis, Nature Methods, vol.9, p.676, 2012.

A. E. Scott, M. Mavrogordato, P. Wright, I. Sinclair, and S. M. Spearing, In situ fibre fracture measurement in carbon-epoxy laminates using high resolution computed tomography, Composites Science and Technology, vol.71, pp.1471-1477, 2011.

,

A. E. Scott, I. Sinclair, S. M. Spearing, A. Thionnet, and A. R. Bunsell, Damage accumulation in a carbon/epoxy composite: Comparison between a multiscale model and computed tomography experimental results, Composites Part A: Applied Science and Manufacturing, vol.43, pp.1514-1522, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00723163

X. Shen, Z. Xia, and F. Ellyin, Cyclic deformation behavior of an epoxy polymer. Part I: Experimental investigation, Polymer Engineering and Science, vol.44, pp.2240-2246, 2004.

Y. Swolfs, L. Gorbatikh, V. Romanov, S. Orlova, S. V. Lomov et al., Stress concentrations in an impregnated fibre bundle with random fibre packing, Composites Science and Technology, vol.74, pp.113-120, 2013.

Y. Swolfs, R. M. Mcmeeking, I. Verpoest, and L. Gorbatikh, Matrix cracks around fibre breaks and their effect on stress redistribution and failure development in unidirectional composites, Composites Science and Technology, vol.108, pp.16-22, 2015.

,

Y. Swolfs, H. Morton, A. E. Scott, L. Gorbatikh, P. A. Reed et al., Synchrotron radiation computed tomography for experimental validation of a tensile strength model for unidirectional fibre-reinforced composites, Composites Part A: Applied Science and Manufacturing, vol.77, pp.106-113, 2015.

Y. Swolfs, I. Verpoest, and L. Gorbatikh, Issues in strength models for unidirectional fibrereinforced composites related to Weibull distributions, fibre packings and boundary effects, Composites Science and Technology, vol.114, pp.42-49, 2015.

,

F. Taheri-behrooz, M. M. Shokrieh, and L. B. Lessard, Progressive Fatigue Damage Modeling of Cross-ply Laminates, II: Experimental Evaluation, Journal of Composite Materials, vol.44, pp.1261-1277, 2010.

G. Tao and Z. Xia, Ratcheting behavior of an epoxy polymer and its effect on fatigue life, Polymer Testing, vol.26, pp.451-460, 2007.

R. P. Tavares, A. R. Melro, M. A. Bessa, A. Turon, W. K. Liu et al., Mechanics of hybrid polymer composites: analytical and computational study, Computational Mechanics, vol.57, pp.405-421, 2016.

. Torayca, , p.700, 2014.

S. Department and . Defense, Polymer Matrix Composites Guidelines for Characterization of Structural Materials, vol.1, 2002.

J. Varna, R. Joffe, and L. A. Berglund, Interfacial toughness evaluation from the single-fiber fragmentation test, Composites Science and Technology, vol.56, pp.1105-1109, 1996.

, , pp.96-102

A. Vassilopoulos, Fatigue Life Prediction of Composites and Composite Structures, 2010.

R. Veysseyre, P. Dunod, H. D. Wagner, J. A. Nairn, and M. Detassis, Toughness of interfaces from initial fiber-matrix debonding in a single fiber composite fragmentation test, Applied Composite Materials, vol.2, pp.107-117, 1995.

W. Weibull, A Statistical Distribution Function of Wide Applicability 7, 1951.

O. Westphal, Analyse thermomécanique de l'endommagement en fatigue de stratifiés carbone/époxy : Détermination de la limite d'endurance à partir d'essais d'autoéchauffement, 2014.

J. D. Whitcomb, Strain energy release rate analysis of cyclic delamination growth in compressively loaded laminate. Effects of Defects in Composite Material, ASTM STP, vol.836, pp.175-193, 1984.

A. Williams, Aerospace growth climbs with carbon fiber [WWW Document, 2016.

M. R. Wisnom, Size effects in the testing of fibre-composite materials, Composites Science and Technology, vol.21, 1999.

M. R. Wisnom and D. Green, Tensile failure due to interaction between fibre breaks, Composites, vol.26, pp.499-508, 1995.

M. R. Wisnom, B. Khan, and S. R. Hallett, Size effects in unnotched tensile strength of unidirectional and quasi-isotropic carbon/epoxy composites, Composite Structures, vol.84, pp.21-28, 2008.

X. Ji, X. Liu, and T. Chou, Dynamic Stress Concentration Factors in Unidirectional Composites, Journal of Composite Materials, vol.19, pp.269-275, 1985.

,

L. Xu, Influence of Stacking Sequence on the Transverse Matrix Cracking in Continuous Fiber Crossply Laminates, Journal of Composite Materials, vol.29, pp.1337-1358, 1995.

S. Zhandarov and E. Mader, Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters, Composites Science and Technology, vol.65, pp.149-160, 2005.

X. Zhou, H. D. Wagner, and S. R. Nutt, Interfacial properties of polymer composites measured by push-out and fragmentation tests, Composites Part A: Applied Science and Manufacturing, vol.32, pp.1543-1551, 2001.

L. Zhuang and A. Pupurs, Effect of neighboring fibers on energy release rate during fiber/matrix debond growth 9, 2014.

L. Zhuang, R. Talreja, and J. Varna, Tensile failure of unidirectional composites from a local fracture plane, Composites Science and Technology, vol.133, pp.119-127, 2016.

,