W. Alan and S. John, Combined deformation-and temperature-induced scission in a rubber cylinder in torsion, International Journal of Non-Linear Mechanics, vol.42, pp.330-335, 2007.

W. Alan and S. John, Influence of thermally induced scission and crosslinking on the post-scission inflation of circular elastomeric membranes, International Journal of Engineering Science, vol.46, pp.758-774, 2008.

M. Aronhime, J. Peng, R. Gillham, and . Small, Effect of time-temperature path of cure on the water absorption of high Tg epoxy resins, Journal of applied polymer science, vol.32, pp.3589-3626, 1986.

M. Arroyo, M. Ciantia, R. Castellanza, A. Gens, and R. Nova, Simulation of cement-improved clay structures with a bonded elasto-plastic model: A practical approach, Computers and Geotechnics, vol.45, pp.140-150, 2012.

R. Saada, G. Bonnet, and D. Bouvard, Thermomechanical behavior of casting sands: experiments and elastoplastic modeling, Int. J. of Plasticity, vol.12, pp.273-294, 1996.

F. Azzouz, Modélisation du comportement thermo-hydro-mécanique d'un sable de fonderie, 1995.

B. Barlas, Etude du comportement et de l'endommagement en fatigue d'alliages d'aluminium de fonderie, 2004.
URL : https://hal.archives-ouvertes.fr/tel-00162056

H. Bargaoui, F. Azzouz, D. Thibault, and G. Cailletaud, Thermomechanical behavior of resin bonded foundry sand cores during casting, Journal of Materials Processing Technology, vol.246, pp.30-41, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01518849

H. Berndt, Molding sands and technology of the shell molding process, VDG-Taschenbuch, vol.9, 1981.

J. Besson, G. Cailletaud, J. Chaboche, and S. Forest, Nonlinear Mechanics of Materials, 2009.

N. Billon, Effet de couplage thermomécanique dans la caractérisation du comportement de polymères solides, Mécanique & industries, vol.4, pp.357-364, 2003.

D. Boenisch, The Coldbox-Plus Process-Higher Core Quality With Reduced Binder Consumption. Giesserei 72, vol.15, pp.435-444, 1985.

H. Brinson and L. Brinson, Polymer engineering science and viscoelasticity: an introduction, 2008.

H. Brinson and L. Brinson, Polymer Engineering Science and Viscoelasticity: An Introduction, 2015.

H. Brinson and L. Brinson, Polymer engineering science and viscoelasticity, 2016.

L. Brinson and W. Knauss, Thermorheologically complex behavior of multiphase viscoelastic materials, Journal of the Mechanics and Physics of Solids, vol.39, pp.859-880, 1991.

F. Camborde, C. Mariotti, and F. Donzé, Numerical study of rock and concrete behaviour by discrete element modelling, Computers and geotechnics, vol.27, pp.225-247, 2000.

J. Campbell, Complete casting handbook: metal casting processes, metallurgy, techniques and design, 2015.

P. Carey and M. Lott, Sand binder systems. Furan no-bake, Foundry Manage. Technol.(USA), vol.123, pp.26-30, 1995.

I. Caylak and R. Mahnken, Thermomechanical characterisation of cold box sand including optical measurements, International Journal of Cast Metals Research, vol.23, pp.176-184, 2010.

D. Chattopadhyay and D. Webster, Thermal stability and flame retardancy of polyurethanes, Progress in Polymer Science, vol.34, pp.1068-1133, 2009.

W. Chen and A. Saleeb, Uniaxial behavior and modeling in plasticity, 1982.

J. Criado, A. Malek, and . Ortega, Applicability of the master plots in kinetic analysis of non-isothermal data, Thermochimica Acta, vol.147, pp.377-385, 1989.

P. , A computer model for simulating progressive, large-scale movement in blocky rock system, Proceedings of the International Symposium on Rock Mechanics, 1971.

P. Cundall and O. Strack, A discrete numerical model for granular assemblies, vol.29, pp.47-65, 1979.

F. Darve, P. Hicher, and J. Reynouard, Les géomatériaux. Hermès, 1995.

H. Dormohammadi and A. Khoei, A three-invariant cap model with isotropic-kinematic hardening rule and associated plasticity for granular materials, International Journal of Solids and Structures, vol.45, pp.631-656, 2008.

D. Drucker and W. Prager, Soil mechanics and plastic analysis or limit design, Quarterly of applied mathematics, vol.10, pp.157-165, 1952.

K. Efstathiou, Synthesis and characterization of a Polyurethane Prepolymer for the development of a novel Acrylate-based polymer foam, Budapest University of Technology and Economics, pp.1-57, 2011.

A. Eringen, Microcontinuum field theories: I. Foundations and solids, 2012.

B. Fayolle, E. Richaud, X. Colin, and J. Verdu, Review: degradation-induced embrittlement in semi-crystalline polymers having their amorphous phase in rubbery state, Journal of Materials Science, vol.43, pp.6999-7012, 2008.

J. Flynn and L. A. Wall, General treatment of the thermogravimetry of polymers, J Res Nat Bur Stand, vol.70, pp.487-523, 1966.

E. Frangin, Adaptation de la méthode des éléments discrets à l'échelle de l'ouvrage en béton armé: une approche couplée éléments discrets/éléments finis, 2008.

T. García, S. Jhaveri, A. Sáenz-valadez, A. Velasco-téllez, E. Cedillo-saucedo et al., Method and composition of binder for manufacturing sand molds and/or cores for foundries, US Patent, vol.8, p.481, 2013.

J. Gardikes, Phenolic resin-polyisocyanate binder systems, US Patent, vol.4, p.229, 1986.

A. Gardziella, Foundry auxiliaries based on reactive resins, vol.10, pp.958-960, 1988.

S. Gibbs, Illuminating Core Gas-Chemically bonded cores can lead to gas defects, but you can stop them. Modern Casting 98, vol.10, p.34, 2008.

S. Giese, S. Roorda, and M. Patterson, Thermal analysis of phenolic urethane binder and correlated properties, Transactions of the American Foundry Society, vol.102, pp.1-12, 2009.

R. Gonzalez, R. Colas, A. Velasco, and S. Valtierra, Characteristics of phenolicurethane cold box sand cores for aluminum casting, International Journal of Metalcasting, vol.5, pp.41-48, 2011.

M. Grayson and C. Fry, On the use of a kinetic map to compare the thermal stability of polymeric materials undergoing weight loss, 1993.

I. Guillot, B. Barlas, G. Cailletaud, M. Clavel, and D. Massinon, Thermomechanical fatigue and aging of cast aluminum alloy : a link between numerical modeling and microstructural approach, 2001.

A. Gurson, Continuum theory of ductile rupture by void nucleation and growth: Part I-Yield criteria and flow rules for porous ductile media, J. of Engng. Mat. Technol, vol.44, pp.2-15, 1977.

J. Haudin and B. Monasse, Plasticity of Polymers". Handbook of Materials Behavior Models, pp.255-264, 2001.

S. Hentz, L. Daudeville, and F. Donzé, Identification and validation of a discrete element model for concrete, Journal of engineering mechanics, vol.130, pp.709-719, 2004.
URL : https://hal.archives-ouvertes.fr/hal-02004500

R. Hipp, D. Harmon, and P. Mcclellan, Accelerated Aging and Methodology Development for Polymeric Composite Material Systems, 1994.

M. Holtzer, M. Górny, and R. Da?ko, Microstructure and Properties of Ductile Iron and Compacted Graphite Iron Castings: The Effects of Mold Sand/Metal Interface Phenomena, 2015.

K. Hwang and T. Tsou, Thermal debinding of powder injection molded parts: Observations and mechanisms, Metallurgical transactions A, vol.23, pp.2775-2782, 1992.

F. Iden, Structures of Cold-Box binder systems and the possibility of influencing them, 2012.

Y. Inoue, Y. Motoyama, H. Takahashi, K. Shinji, and M. Yoshida, Effect of sand mold models on the simulated mold restraint force and the contraction of the casting during cooling in green sand molds, J. of Materials Processing Technology, vol.213, pp.1157-1165, 2013.

A. John, S. Alan, and S. Alan, Chemorheological response of elastomers at elevated temperatures: Experiments and simulations, Journal of the Mechanics and Physics of Solids, vol.53, pp.2758-2793, 2005.

M. Johlitz, D. Scharding, S. Diebels, J. Retka, and A. Lion, Modelling of thermo-viscoelastic material behaviour of polyurethane close to the glass transition temperature, ZAMM -Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, vol.90, pp.387-398, 2010.

M. Johlitz and A. Lion, Chemo-thermomechanical ageing of elastomers based on multiphase continuum mechanics, Continuum Mechanics and Thermodynamics, vol.25, pp.605-624, 2013.

G. Jomaa, Etude des dégagements gazeux survenant pendant la coulée de pièces d'Aluminium, ENSMP, 2014.

G. Jomaa, P. Goblet, C. Coquelet, and V. Morlot, Kinetic modeling of polyurethane pyrolysis using non-isothermal thermogravimetric analysis, Thermochimica Acta, vol.612, pp.10-18, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01158620

D. Karunakar and G. Datta, Controlling green sand mould properties using artificial neural networks and genetic algorithms --A comparison, Applied Clay Science, vol.37, pp.58-66, 2007.

E. Kong, Physical aging in epoxy matrices and composites, pp.125-171, 1986.

L. Kova?evi?, P. Terek, D. Kaka?, and A. Mileti?, A correlation to describe interfacial heat transfer coefficient during solidification of Al-Si alloy casting, J. of Materials Processing Technology, vol.212, pp.1856-1861, 2012.

G. Ladégourdi, M. Dörschel, U. Wichmann, A. Anbari, and D. Strunk, Coldbox binding agent systems and mixtures for use as additives for such binding agent systems, p.150, 2013.

R. A. Laitar and E. Gomez, Polyurethane binder compositions. US Patent, vol.4, p.124, 1985.

C. Liebl, M. Johlitz, B. Yagimli, and A. Lion, Simulation of curing-induced viscoplastic deformation: a new approach considering chemo-thermomechanical coupling, Archive of Applied Mechanics, vol.82, pp.1133-1144, 2012.

R. Mahnken and I. Caylak, Optical Measurements for a Cold-Box Sand and Aspects of Direct and Inverse Problems for Micropolar Elasto-Plasticity". Advances in Extended and Multifield Theories for Continua, Lecture Notes in Applied and Computational Mechanics, vol.59, pp.175-196, 2011.

F. Manguin, Modélisation et optimisation de la dégradation thermique de liants utilisés en injection de céramiques, 1992.

L. Martin, Intégration du métier de la fonderie dans les processus de conception: méthodologies et outils associés, 2006.

R. Martinez, Modélisation multiéchelles du vieillissement des alliages d'aluminium -Multiscale modeling of the ageing of cast aluminium alloys, 2012.

R. Martin, W. Dunnavant, G. Sturtz, and H. Langer, Urethane binder compositions for no-bake and cold box foundry application utilizing isocyanato-urethane polymers, US Patent, vol.4, p.480, 1981.

D. Metzger, J. New, and J. Dantzig, A sand surface element for efficient modeling of residual stress in castings, Appl. Math. Modelling, vol.25, pp.825-842, 2001.

. Montupet, , 2008.

C. Monroe, C. Beckermann, and J. Klinkhammer, Simulation of Deformation and Hot Tear Formation using a visco-plastic Model with Damage. Modeling of Casting, Welding, and Advanced Solidification Processes-XII, SL Cockcroft and DM Maijer, pp.313-320, 2009.

. Montupet, Sand core deformation during casting, 2013.

, Montupet. Formation noyautage. Internal report, 2014.

, Montupet. Sand core instrumentation. Internal report, 2015.

. Montupet, , 2016.

Y. Motoyama, H. Takahashi, Y. Inoue, K. Shinji, and M. Yoshida, Development of a device for dynamical measurement of the load on casting and the contraction of the casting in a sand mold during cooling, J. of Materials Processing Technology, vol.212, pp.1399-1405, 2012.

Y. Motoyama, Y. Inoue, G. Saito, and M. Yoshida, A verification of the thermal stress analysis, including the furan sandmold, used to predict the thermal stress in castings, J. of Materials Processing Technology, vol.213, pp.2270-2277, 2013.

Y. Motoyama, H. Takahashi, Y. Inoue, K. Shinji, and M. Yoshida, Dynamic measurements of the load on castings and the contraction of castings during cooling in sand molds, J. of Materials Processing Technology, vol.213, pp.238-244, 2013.

B. Navarro, M. Arrieta, A. Mujica-garcia, V. Sessini, D. Lopez et al., Thermal Degradation Effects on Polyurethanes and Their Nanocomposites. Reactions and Mechanisms in Thermal Analysis of Advanced Materials, pp.165-189, 2015.

B. Nicouleau, Etude expérimentale et numérique du vieillissement d'un alliage d'aluminium. Application aux culasses automobiles, 1999.

L. Núñez, F. Fraga, M. Nunez, and M. Villanueva, Thermogravimetric study of the decomposition process of the system BADGE (n= 0)/1, 2 DCH, Polymer, vol.41, pp.4635-4641, 2000.

T. Ozawa, A new method of analyzing thermogravimetric data, Bulletin of the chemical society of Japan, vol.38, pp.1881-1886, 1965.

W. Pabst, Micropolar materials, Ceramics-Silikaty, vol.49, pp.170-180, 2005.

X. Pan, Y. Yang, G. Yang, D. Yin, and Y. Zhou, Design and Simulation Optimization of Casting Process for Aluminum Alloy Engine Cylinder Head, Appl. Mechanics and Materials, pp.593-597, 2014.

C. Paris, Étude et modélisation de la polymérisation dynamique de composites à matrice thermodurcissable, 2011.

J. Pascault, H. Sautereau, J. Verdu, and R. Williams, Thermosetting polymers, vol.64, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00870591

C. Pederson, The effect of temperature on transverse cracking in high performance composites, 1992.

L. Pilato, Phenolic resins: a century of progress, 2010.

C. Priebe and D. Koch, Binder system based on polyurethane for producing cores and casting molds using cyclic formals, molding material mixture, and method, p.62, 2014.

K. Rahmoeller, Mold binder decomposition: prime source of cast iron gas defects, Modern casting, vol.83, pp.36-39, 1993.

V. Rinaldi and J. Santamarina, Cemented soils: small strain stiffness, Deformational Characteristics of Geomaterials, vol.1, pp.267-273, 2008.

S. Rios, M. Ciantia, N. Gonzalez, M. Arroyo, and A. Viana-da-fonseca, Simplifying calibration of bonded elasto-plastic models, Computers and Geotechnics, vol.73, pp.100-108, 2016.

S. Robert, Practice of the shell molding process, 1971.

F. Rodriguez, C. Cohen, C. Ober, and L. Archer, Principles of polymer systems, 2014.

K. Roscoe, A. Schofield, and C. Wroth, On the yielding of soils, Geotechnique, vol.8, pp.22-53, 1958.

K. Roscoe and J. Burland, On the generalized stress-strain behaviour of wet clay, pp.535-609, 1968.

S. Saikaew and S. Wiengwiset, Optimization of molding sand composition for quality improvement of iron castings, Applied Clay Science, pp.26-31, 2012.

R. Salapete, B. Barlas, D. Nicouleau, G. Massinon, A. Cailletaud et al., Modelling of Fatigue Damage in Aluminum Cylinder Heads, pp.837-838, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00146324

G. Samuels and C. Beckermann, Measurement of gas evolution from PUNB bonded sand as a function of temperature, International Journal of Metalcasting, vol.6, pp.23-40, 2012.

M. Samonds, K. Morgan, and R. Lewis, Finite element modelling of solidification in sand castings employing an implicit-explicit algorithm, Appl. Math. Modelling, vol.9, pp.170-174, 1985.

C. Schuch, D. Vicentim, L. Sereda, and S. Silva, Foundry binder systems, p.241, 2014.

J. Shao, Q. Zhu, and K. Su, Modeling of creep in rock materials in terms of material degradation, Computers and Geotechnics, vol.30, pp.549-555, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00755149

S. Sharma and M. Fahey, Degradation of stiffness of cemented calcareous soil in cyclic triaxial tests, Journal of Geotechnical and Geoenvironmental engineering, vol.129, pp.619-629, 2003.

J. Shao, Y. Jia, D. Kondo, and A. Chiarelli, A coupled elastoplastic damage model for semi-brittle materials and extension to unsaturated conditions, Mechanics of Materials, vol.38, issue.3, pp.218-232, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00021987

M. Stancliffe, Phenolic Urethane Cold-box Binders-A Study of Global Properties, Variables, Causes and Effects. Casting the Future, World Foundry Congress, 67; 118/1-118/10; Casting the Future, World Foundry, 2006.

A. Starobin, C. Hirt, and D. Goettsch, A Model for Binder Gas Generation and Transport in Sand Cores and Molds. Modeling of Casting, Welding and Advanced Solidification Processes-XII, pp.345-352, 2009.

A. Starobin and C. Hirt, FLOW-3D Core Gas Model: Binder Gas Generation and Transport in Sand Cores and Molds, 2009.

A. Starobin, D. Goettsch, M. Walker, and D. Burch, GAS PRESSURE IN ALUMINUM BLOCK WATER JACKET CORES, International Journal of Metalcasting, vol.5, pp.57-64, 2011.

B. J. Stauder, H. Kerber, and P. Schumacher, Foundry sand core property assessment by 3-point bending test evaluation, Journal of Materials Processing Technology, vol.237, pp.188-196, 2016.

R. Stotzel, K. Eising, and K. Smarzoch, Coating compounds for casting moulds and cores that prevent reaction gas defects, p.348, 2010.

L. Struik, Physical aging in amorphous polymers and other materials, 1977.

S. Sulaiman and A. Hamouda, Modeling of the thermal history of the sand casting process, J. of Materials Processing Technology, vol.22, pp.1884-1890, 2012.

J. Sullivan, Creep and physical aging of composites, Composites Science and Technology, vol.39, pp.207-232, 1990.

S. Sun, B. Yuan, and M. Liu, Effects of moulding sands and wall thickness on microstructure and mechanical properties of Sr-modified A356 aluminum casting alloy, Trans. Nonferrous Met. Soc. China, vol.22, pp.1884-1890, 2012.

M. Tant and G. Wilkes, An overview of the nonequilibrium behavior of polymer glasses, Polymer Engineering & Science, vol.21, pp.874-895, 1981.

E. Thian, N. Loh, K. Khor, and S. Tor, Effects of debinding parameters on powder injection molded Ti-6Al-4V/HA composite parts, Advanced Powder Technology, vol.12, pp.361-370, 2001.

J. Thiel, M. Ziegler, P. Dziekonski, and S. Joyce, Investigation into the Technical Limitations of Silica Sand Due to Thermal Expansion, Transactions of the American Foundry Society, vol.115, pp.383-400, 2007.

J. Thiel, High Temperature Physical Properties of Chemically Bonded Sands Provide Insight into Core Distortion. National Technical and Operating Conference, p.91, 2008.

J. Thole and C. Beckermann, Measurement of elastic modulus of PUNB bonded sand as a function of temperature, International Journal of Metalcasting Fall, vol.10, pp.7-18, 2010.

D. Thompson, L. Markoski, and J. Moore, Rapid synthesis of hyperbranched aromatic polyetherimides, Macromolecules, vol.32, pp.4764-4768, 1999.

A. Tobolsky, Properties and structure of polymers, 1960.

D. Trinowski, G. Ladegourdie, and K. Löchte, New coldbox binder system for improved productivity, Transactions of the American Foundry Society, vol.107, pp.51-57, 1999.

G. Trovati, E. A. Sanches, S. M. Souza, A. L. Santos, S. C. Neto et al., Rigid and semi rigid polyurethane resins: A structural investigation using DMA, SAXS and Le Bail method, Journal of Molecular Structure, vol.1075, pp.589-593, 2014.

V. Tvergaard and A. Needleman, Analysis of cup-cone fracture in a round tensile bar, Acta Metall, vol.32, pp.157-169, 1984.

V. Tvergaard, Material failure by void growth to coalescence, Advances in Appl. Mech, vol.27, pp.83-151, 1990.

J. Vaunat and A. Gens, Bond degradation and irreversible strains in soft argillaceous rock, Proceedings of the 12th panamerican conference on soil mechanics and geotechnical engineering, 2003.

B. Van-hemelryck, P. Vacelet, J. Roze, J. Muller, and D. Koch, Use of amine blends for foundry shaped cores and casting metals, p.89, 2010.

I. Ward and D. Hadley, An introduction to the mechanical properties of solid polymers, 1993.

T. E. Warner, Method of curing hot box sand cores, US Patent, vol.5, p.995, 1994.

T. Wongsiriamnuay and N. Tippayawong, Non-isothermal pyrolysis characteristics of giant sensitive plants using thermogravimetric analysis, Bioresource technology, vol.101, pp.5638-5644, 2010.

H. Yu, CASM: A unified state parameter model for clay and sand, International Journal for Numerical and Analytical Methods in Geomechanics, vol.22, pp.621-653, 1998.