M. Finlayson and T. Van-denend, Experiencing the loss of mobility: perspectives of older adults with MS, Disabil Rehabil, vol.25, pp.1168-80, 2003.

M. L. Boninger, B. E. Dicianno, R. A. Cooper, J. D. Towers, A. M. Koontz et al., Shoulder magnetic resonance imaging abnormalities, wheelchair propulsion, and gender, Arch Phys Med Rehabil, vol.84, pp.1615-1635, 2003.

K. A. Curtis, G. A. Drysdale, R. D. Lanza, M. Kolber, R. S. Vitolo et al., Shoulder pain in wheelchair users with tetraplegia and paraplegia, Arch Phys Med Rehabil, vol.80, pp.453-460, 1999.

S. Sprigle and M. Huang, Impact of mass and weight distribution on manual wheelchair propulsion torque, Assist Technol, vol.27, pp.226-261, 2015.

M. L. Boninger, M. Baldwin, R. A. Cooper, A. Koontz, and L. Chan, Manual wheelchair pushrim biomechanics and axle position, Arch Phys Med Rehabil, vol.81, pp.608-621, 2000.

B. R. Kotajarvi, M. B. Sabick, K. An, K. D. Zhao, K. R. Kaufman et al., The effect of seat position on wheelchair propulsion biomechanics, J Rehabil Res Dev, vol.41, pp.403-417, 2004.

K. Samuelsson, H. Tropp, E. Nylander, and B. Gerdle, The effect of rear-wheel position on seating ergonomics and mobility efficiency in wheelchair users with spinal cord injuries: a pilot study, J Rehabil Res Dev, vol.41, p.65, 2004.

W. M. Richter, The effect of seat position on manual wheelchair propulsion biomechanics: a quasi-static model-based approach, Med Eng Phys, vol.23, pp.707-719, 2001.

C. J. Hughes, W. H. Weimar, P. N. Sheth, and C. E. Brubaker, Biomechanics of wheelchair propulsion as a function of seat position and user-to-chair interface, Arch Phys Med Rehabil, vol.73, pp.263-272, 1992.

D. Gutierrez, S. J. Mulroy, C. J. Newsam, J. Gronley, and J. Perry, Effect of fore-aft seat position on shoulder demands during wheelchair propulsion: part 2. An electromyographic analysis, J Spinal Cord Med, vol.28, pp.222-231, 2005.

J. S. Slowik, P. S. Requejo, S. J. Mulroy, and R. R. Neptune, The influence of wheelchair propulsion hand pattern on upper extremity muscle power and stress, J Biomech, vol.49, pp.1554-61, 2016.

M. L. Boninger, A. L. Souza, R. A. Cooper, S. G. Fitzgerald, A. M. Koontz et al., Propulsion patterns and pushrim biomechanics in manual wheelchair propulsion, Arch Phys Med Rehabil, vol.83, pp.718-741, 2002.

S. De-groot, H. Veeger, A. P. Hollander, and L. Van-der-woude, Effect of wheelchair stroke pattern on mechanical efficiency, Am J Phys Med Rehabil, vol.83, pp.640-649, 2004.

L. Qi, J. Wakeling, S. Grange, and M. Ferguson-pell, Patterns of shoulder muscle coordination vary between wheelchair propulsion techniques, IEEE Trans Neural Syst Rehabil Eng, vol.22, pp.559-66, 2014.

A. M. Kwarciak, J. T. Turner, L. Guo, and W. M. Richter, The effects of four different stroke patterns on manual wheelchair propulsion and upper limb muscle strain, Disabil Rehabil Assist Technol, vol.7, pp.459-63, 2012.

P. S. Requejo, J. Furumasu, and S. J. Mulroy, Evidence-based strategies for preserving mobility for elderly and aging manual wheelchair users, Top Geriatr Rehabil, vol.31, pp.26-41, 2015.

, Paralyzed Veterans of America Consortium for Spinal Cord Medicine Preservation of upper limb function following spinal cord injury -a clinical practice guideline for health-care professionals, J Spinal Cord Med, vol.28, pp.434-70, 2005.

A. Leardini, L. Chiari, D. Croce, U. Cappozzo, and A. , Human movement analysis using stereophotogrammetry. Part 3. Soft tissue artifact assessment and compensation, Gait Posture, vol.21, pp.212-237, 2005.

M. ?enk and L. Chèze, A new method for motion capture of the scapula using an optoelectronic tracking device: a feasibility study, Comput Methods Biomech Biomed Eng, vol.13, pp.397-401, 2010.

C. Andel, K. Van-hutten, M. Eversdijk, D. Veeger, and J. Harlaar, Recording scapular motion using an acromion marker cluster, Gait Posture, vol.29, pp.123-131, 2009.

S. Duprey, F. Billuart, S. Sah, X. Ohl, T. Robert et al., Three-dimensional rotations of the scapula during arm abduction: evaluation of the acromion marker cluster method in comparison with a model-based approach using biplanar radiograph images, J Appl Biomech, vol.31, pp.396-402, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01302587

M. Lempereur, S. Brochard, F. Leboeuf, and O. Rémy-néris, Validity and reliability of 3D marker based scapular motion analysis: a systematic review, J Biomech, vol.47, pp.2219-2249, 2014.

M. B. Warner, P. H. Chappell, and M. J. Stokes, Measuring scapular kinematics during arm lowering using the acromion marker cluster, Hum Mov Sci, vol.31, pp.386-96, 2012.

M. Morrow, K. R. Kaufman, and K. An, Scapula kinematics and associated impingement risk in manual wheelchair users during propulsion and a weight relief lift, Clin Biomech, vol.26, pp.352-359, 2011.

T. W. Lu, O. Connor, and J. J. , Bone position estimation from skin marker co-ordinates using global optimisation with joint constraints, J Biomech, vol.32, pp.129-163, 1999.

E. Roux, S. Bouilland, A. Godillon-maquinghen, and D. Bouttens, Evaluation of the global optimisation method within the upper limb kinematics analysis, J Biomech, vol.35, pp.1279-83, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00396044

M. Begon, C. Bélaise, A. Naaim, A. Lundberg, and L. Chèze, Multibody kinematics optimization with marker projection improves the accuracy of the humerus rotational kinematics, J Biomech, vol.62, pp.117-140, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01635717

B. Michaud, S. Duprey, and M. Begon, Scapular kinematic reconstruction -segmental optimization, multibody optimization with open-loop or closed-loop chains: which one should be preferred?, Int Biomech, vol.4, pp.86-94, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01738637

F. Van-der-helm, A finite element musculoskeletal model of the shoulder mechanism, J Biomech, vol.27, pp.551555-3569, 1994.

D. Blana, J. G. Hincapie, E. K. Chadwick, and R. F. Kirsch, A musculoskeletal model of the upper extremity for use in the development of neuroprosthetic systems, J Biomech, vol.41, pp.1714-1735, 2008.

B. A. Garner and M. G. Pandy, A kinematic model of the upper limb based on the visible human project (VHP) image dataset, Comput Methods Biomech Biomed Eng, vol.2, pp.107-131, 1999.

A. Naaim, F. Moissenet, S. Duprey, M. Begon, and L. Chèze, Effect of various upper limb multibody models on soft tissue artefact correction: a case study, J Biomech, vol.62, pp.102-111, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01635819

B. Bolsterlee, H. Veeger, and F. Van-der-helm, Modelling clavicular and scapular kinematics: from measurement to simulation, Med Biol Eng Comput, vol.52, pp.283-91, 2014.

K. Holzbaur, W. M. Murray, and S. L. Delp, A model of the upper extremity for simulating musculoskeletal surgery and analyzing neuromuscular control, Ann Biomed Eng, vol.33, pp.829-869, 2005.

K. R. Saul, X. Hu, C. M. Goehler, M. E. Vidt, M. Daly et al., Benchmarking of dynamic simulation predictions in two software platforms using an upper limb musculoskeletal model, Comput Methods Biomech Biomed Eng, vol.18, pp.1445-58, 2015.

J. W. Rankin, W. M. Richter, and R. R. Neptune, Individual muscle contributions to push and recovery subtasks during wheelchair propulsion, J Biomech, vol.44, pp.1246-52, 2011.

M. M. Morrow, J. W. Rankin, R. R. Neptune, and K. R. Kaufman, A comparison of static and dynamic optimization muscle force predictions during wheelchair propulsion

, J Biomech, vol.47, pp.3459-65, 2014.

J. S. Slowik, J. L. Mcnitt-gray, P. S. Requejo, S. J. Mulroy, and R. R. Neptune, Compensatory strategies during manual wheelchair propulsion in response to weakness in individual muscle groups: a simulation study, Clin Biomech, vol.33, pp.34-41, 2016.

J. H. De-groot and R. Brand, A three-dimensional regression model of the shoulder rhythm, Clin Biomech (Bristol, Avon), vol.16, pp.735-778, 2001.

G. M. Pronk, The shoulder girdle: analysed and modelled kinematically. The Netherlands: Delft University of Technology, 1991.

F. Van-der-helm, H. Veeger, G. M. Pronk, L. Van-der-woude, and R. H. Rozendal, Geometry parameters for musculoskeletal modelling of the shoulder system, J Biomech, vol.25, pp.129-173, 1992.

A. Seth, M. Sherman, P. Eastman, and S. Delp, Minimal formulation of joint motion for biomechanisms, Nonlinear Dyn, vol.62, pp.291-303, 2010.

A. Seth, R. Matias, A. P. Veloso, S. L. Delp, J. Harlaar et al., A biomechanical model of the scapulothoracic joint to accurately capture scapular kinematics during shoulder movements, PLoS One, vol.11, p.141028, 2016.

M. Dabonneville, P. Vaslin, P. Kauffmann, N. De-saint-rémy, Y. Couétard et al., A self-contained wireless wheelchair ergometer designed for biomechanical measures in real life conditions, Technol Disabil, vol.17, pp.63-76, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00117441

S. Hybois, A. Siegel, J. Bascou, N. Eydieux, P. Vaslin et al., Shoulder kinetics during start-up and propulsion with a manual wheelchair within the initial phase of uninstructed training, Disabil Rehabil Assist Technol, vol.13, pp.40-46, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02185659

C. Sauret, V. Faye, J. Bascou, H. Pillet, and F. Lavaste, Handrim mechanical power during wheelchair propulsion on level and cross-slope surfaces: a preliminary study, Comput Methods Biomech Biomed Eng, vol.16, pp.124-129, 2013.

I. Söderkvist and P. A. Wedin, Determining the movements of the skeleton using well-configured markers, J Biomech, vol.26, pp.1473-1480, 1993.

S. L. Delp, F. C. Anderson, A. S. Arnold, P. Loan, A. Habib et al., OpenSim: open-source software to create and analyze dynamic simulations of movement, IEEE Trans Biomed Eng, vol.54, pp.1940-50, 2007.

R. A. Cooper, M. L. Boninger, S. D. Shimada, and B. M. Lawrence, Glenohumeral joint kinematics and kinetics for three coordinate system representations during wheelchair propulsion, Am J Phys Med Rehabil, vol.78, pp.435-481, 1999.

G. Desroches, R. Aissaoui, and D. Bourbonnais, Effect of system tilt and seat-to-backrest angles on load sustained by shoulder during wheelchair propulsion, J Rehabil Res Dev, vol.43, p.871, 2006.

G. Wu, F. C. Van-der-helm, H. Veeger, M. Makhsous, P. Van-roy et al., ISB recommendation on definitions of joint coordinate systems of various joints for the reporting of human joint motion-Part II: shoulder, elbow, wrist and hand, J Biomech, vol.38, pp.981-92, 2005.

Y. Blache and M. Begon, Influence of shoulder kinematic estimate on joint and muscle mechanics predicted by musculoskeletal model, IEEE Trans Biomed Eng, vol.65, issue.4, pp.715-737, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02127341

S. Van-drongelen, L. H. Van-der-woude, T. W. Janssen, E. L. Angenot, E. K. Chadwick et al., Mechanical load on the upper extremity during wheelchair activities, Arch Phys Med Rehabil, vol.86, pp.1214-1234, 2005.

S. Hybois, P. Puchaud, and M. Bourgain, Comparison of shoulder kinematic chain models and their influence on kinematics and kinetics in the study of manual wheelchair propulsion, Medical Engineering and Physics
URL : https://hal.archives-ouvertes.fr/hal-02186404

S. Hybois, P. Puchaud, and M. Bourgain, PRESS JID: JJBE [m5G, 2019.

R. Vegter, J. Hartog, S. De-groot, C. J. Lamoth, M. J. Bekker et al., Early motor learning changes in upper-limb dynamics and shoulder complex loading during handrim wheelchair propulsion, J Neuroeng Rehabil, vol.12, p.26, 2015.

M. Morrow, W. J. Hurd, K. R. Kaufman, and K. An, Upper-limb joint kinetics expression during wheelchair propulsion, J Rehabil Res Dev, vol.46, p.939, 2009.

J. L. Collinger, M. L. Boninger, A. M. Koontz, R. Price, S. A. Sisto et al., Shoulder biomechanics during the push phase of wheelchair propulsion: a multisite study of persons with paraplegia, Arch Phys Med Rehabil, vol.89, pp.667-76, 2008.

J. L. Mercer, M. Boninger, A. Koontz, D. Ren, T. Dyson-hudson et al., Shoulder joint kinetics and pathology in manual wheelchair users, Clin Biomech, vol.21, pp.781-790, 2006.

S. Van-drongelen, L. H. Van-der-woude, T. W. Janssen, E. L. Angenot, E. K. Chadwick et al., Mechanical load on the upper extremity during wheelchair activities, Arch Phys Med Rehabil, vol.86, pp.1214-1234, 2005.

M. B. Sabick, B. R. Kotajarvi, and K. An, A new method to quantify demand on the upper extremity during manual wheelchair propulsion, Arch Phys Med Rehabil, vol.85, pp.1151-1160, 2004.

H. Veeger, L. A. Rozendaal, and F. Van-der-helm, Load on the shoulder in low intensity wheelchair propulsion, Clin Biomech, vol.17, pp.8-14, 2002.

A. M. Koontz, R. A. Cooper, M. L. Boninger, A. L. Souza, and B. T. Fay, Shoulder kinematics and kinetics during two speeds of wheelchair propulsion, J Rehabil Res Dev, vol.39, pp.635-684, 2002.

O. M. O'reilly, M. P. Sena, B. T. Feeley, and J. C. Lotz, On representations for joint moments using a joint coordinate system, J Biomech Eng, vol.135, p.114504, 2013.

G. Desroches, Expression of joint moment in the joint coordinate system, J Biomech Eng, vol.132, p.114503, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00990528

N. Eydieux, S. Hybois, A. Siegel, J. Bascou, P. Vaslin et al., Changes in wheelchair biomechanics within the first 120 minutes of practice: spatiotemporal parameters, handrim forces, motor force, rolling resistance and foreaft stability, Disabil Rehabil Assist Technol, vol.20, pp.1-9, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02059439

A. R. Karduna, P. W. Mcclure, L. A. Michener, and B. Sennett, Dynamic measurements of three-dimensional scapular kinematics: a validation study, J Biomech Eng, vol.123, pp.184-90, 2001.

S. Hybois, P. Puchaud, and M. Bourgain, Comparison of shoulder kinematic chain models and their influence on kinematics and kinetics in the study of manual wheelchair propulsion, Medical Engineering and Physics
URL : https://hal.archives-ouvertes.fr/hal-02186404

I. Ville, J. Ravaud, and D. Mahut, Les utilisateurs du fauteuil roulant en France. Le fauteuil roulant manuel: choix et r eglages [Manual wheelchair users in France, in the manual wheelchair: choice and settings, pp.59-68, 2011.

, Improving services for wheelchair users and carers: Good Practice Guide -learning from the Wheelchair Services Collaborative. London: Department of Health and the NHS Modernisation Agency, 2005.

M. Ackermann, F. Leonardi, and H. R. Costa, Modeling and optimal control formulation for manual wheelchair locomotion: the influence of mass and slope on performance, Proceedings of the 5th IEEE RAS/EMBS International Conference on, pp.1079-1084, 2014.

M. L. Boninger, B. E. Dicianno, and R. A. Cooper, Shoulder magnetic resonance imaging abnormalities, wheelchair propulsion, and gender, Arch Phys Med Rehabil, vol.84, pp.1615-1620, 2003.

P. Nichols, P. A. Norman, and J. R. Ennis, Wheelchair user's shoulder? Shoulder pain in patients with spinal cord lesions

, Scand J Rehabil Med, vol.11, pp.29-32, 1979.

M. A. Finley and M. M. Rodgers, Prevalence and identification of shoulder pathology in athletic and nonathletic wheelchair users with shoulder pain: a pilot study, J Rehabil Res Dev, vol.41, pp.395-402, 2004.

J. L. Mercer, M. Boninger, and A. Koontz, Shoulder joint kinetics and pathology in manual wheelchair users, Clin Biomech, vol.21, pp.781-789, 2006.

R. N. Robertson, M. L. Boninger, and R. A. Cooper, Pushrim forces and joint kinetics during wheelchair propulsion, Arch Phys Med Rehabil, vol.77, pp.856-864, 1996.

K. Kulig, S. S. Rao, and S. J. Mulroy, Shoulder joint kinetics during the push phase of wheelchair propulsion, Clin Orthop Relat Res, vol.354, pp.132-143, 1998.

S. Hybois and . Al,

H. Veeger, L. A. Rozendaal, and F. Van-der-helm, Load on the shoulder in low intensity wheelchair propulsion, Clin Biomech, vol.17, pp.211-218, 2002.

S. Van-drongelen, L. H. Van-der-woude, and T. W. Janssen, Mechanical load on the upper extremity during wheelchair activities, Arch Phys Med Rehabil, vol.86, pp.1214-1220, 2005.

A. M. Koontz, R. A. Cooper, and M. L. Boninger, A kinetic analysis of manual wheelchair propulsion during start-up on select indoor and outdoor surfaces, JRRD, vol.42, pp.447-458, 2005.

M. L. Boninger, A. L. Souza, and R. A. Cooper, Propulsion patterns and pushrim biomechanics in manual wheelchair propulsion, Arch Phys Med Rehabil, vol.83, pp.718-723, 2002.

S. De-groot, H. Veeger, and A. P. Hollander, Effect of Wheelchair Stroke Pattern on Mechanical Efficiency, Am J Phys Med Rehabil, vol.83, pp.640-649, 2004.

L. Qi, J. Wakeling, and S. Grange, Patterns of shoulder muscle coordination vary between wheelchair propulsion techniques, IEEE Trans Neural Syst Rehabil Eng, vol.22, pp.559-566, 2014.

J. S. Slowik, P. S. Requejo, and S. J. Mulroy, The influence of wheelchair propulsion hand pattern on upper extremity muscle power and stress, J Biomech, vol.49, pp.1554-1561, 2016.

M. M. Rodgers, R. E. Keyser, and E. K. Rasch, Influence of training on biomechanics of wheelchair propulsion, J Rehabil Res Dev, vol.38, pp.505-511, 2001.

M. Bougenot, N. Tordi, and A. C. Betik, Effects of a wheelchair ergometer training programme on spinal cord-injured persons, Spinal Cord, vol.41, pp.451-456, 2003.

S. De-groot, M. De-bruin, and S. P. Noomen, Mechanical efficiency and propulsion technique after 7 weeks of lowintensity wheelchair training, Clin Biomech, vol.23, pp.434-441, 2008.

N. Tordi, L. Mourot, and A. Chapuis, Effects of a primary rehabilitation programme on arterial vascular adaptations in an individual with paraplegia, Ann Phys Rehabil Med, vol.52, pp.66-73, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00452046

S. De-groot, H. Veeger, and A. P. Hollander, Consequence of feedback-based learning of an effective hand rim wheelchair force production on mechanical efficiency, Clin Biomech, vol.17, pp.219-226, 2002.

M. T. Leving, R. Vegter, and J. Hartog, Effects of visual feedback-induced variability on motor learning of handrim wheelchair propulsion, PLoS ONE, vol.10, p.127311, 2015.

I. Rice, D. Gagnon, and J. Gallagher, Hand rim wheelchair propulsion training using biomechanical real-time visual feedback based on motor learning theory principles, J Spinal Cord Med, vol.33, pp.33-42, 2010.

M. Blouin, M. Lalumiere, and D. H. Gagnon, Characterization of the immediate effect of a training session on a manual wheelchair simulator with haptic biofeedback: towards more effective propulsion, IEEE Trans Neural Syst Rehabil Eng, vol.23, pp.104-115, 2015.

L. Van-der-woude, J. J. Van-croonenborg, and I. Wolff, Physical work capacity after 7 wk of wheelchair training: effect of intensity in able-bodied subjects, Med Sci Sports Exerc, vol.31, pp.331-341, 1999.

S. De-groot, H. Veeger, and A. P. Hollander, Short-term adaptations in co-ordination during the initial phase of learning manual wheelchair propulsion, J Electromyogr Kinesiol, vol.13, pp.217-228, 2003.

L. Roux, S. Hanneton, and A. Roby-brami, Shoulder movements during the initial phase of learning manual wheelchair propulsion in able-bodied subjects, Clin Biomech, vol.21, issue.1, pp.45-51, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00021098

R. Vegter, C. J. Lamoth, and S. De-groot, Inter-individual differences in the initial 80 minutes of motor learning of handrim wheelchair propulsion, PLoS One, vol.9, p.89729, 2014.

R. Vegter, S. De-groot, and C. J. Lamoth, Initial skill acquisition of handrim wheelchair propulsion: a new perspective, IEEE Trans Neural Syst Rehabil Eng, vol.22, pp.104-113, 2014.

S. Hwang, S. Kim, and Y. Kim, Torque and power outputs on skilled and unskilled users during manual wheelchair propulsion, Conf Proc IEEE Eng Med Biol Soc, vol.2012, pp.4820-4822, 2012.

R. Vegter, J. Hartog, and S. De-groot, Early motor learning changes in upper-limb dynamics and shoulder complex loading during handrim wheelchair propulsion

, J NeuroEngineering Rehabil, vol.12, p.26, 2015.

P. Westerhoff, F. Graichen, and A. Bender, Measurement of shoulder joint loads during wheelchair propulsion measured in vivo, Clin Biomech, vol.26, pp.982-989, 2011.

M. L. Tolerico, D. Ding, and R. A. Cooper, Assessing mobility characteristics and activity levels of manual wheelchair users, J Rehabil Res Dev, vol.44, p.561, 2007.

M. Kloosterman, J. H. Buurke, and L. Schaake, Clinical biomechanics exploration of shoulder load during hand-rim wheelchair start-up with and without power-assisted propulsion in experienced wheelchair users, Clin Biomech, vol.34, pp.1-6, 2016.

C. Sauret, P. Vaslin, and R. Dumas, Computation of the mechanical power of a manual wheelchair user in actual conditions: preliminary results, Comput Methods Biomech Biomed Eng, vol.15, issue.1, pp.173-174, 2012.

M. Dabonneville, P. Vaslin, and P. Kauffmann, self-contained wireless wheelchair ergometer designed for biomechanical measures in real life conditions, Technol Disabil, vol.17, pp.63-76, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00117441

C. Sauret, P. Vaslin, and F. Lavaste, Effects of user's actions on rolling resistance and wheelchair stability during handrim wheelchair propulsion in the field, Med Eng Phys, vol.35, pp.289-297, 2013.

C. Sauret, M. Dabonneville, and Y. Cou-etard, Zeroing of sixcomponent handrim dynamometer for biomechanical studies of manual wheelchair locomotion, Comput Methods Biomech Biomed Eng, vol.17, pp.416-422, 2014.

C. Sauret, Y. Couetard, and P. Vaslin, Dynamic calibration of a wheelchair six-component wheel dynamometer rolling on the floor, Comput Methods Biomech Biomed Eng, vol.14, issue.1, pp.67-69, 2011.

G. Wu, F. Van-der-helm, and H. Veeger, ISB recommendation on definitions of joint coordinate systems of various joints for the reporting of human joint motion-Part II: shoulder, elbow, wrist and hand, J Biomech, vol.38, pp.981-992, 2005.

S. L. Delp, F. C. Anderson, and A. S. Arnold, OpenSim: opensource software to create and analyze dynamic simulations of movement, IEEE Trans Biomed Eng, vol.54, pp.1940-1950, 2007.

K. R. Saul, X. Hu, and C. M. Goehler, Benchmarking of dynamic simulation predictions in two software platforms using an upper limb musculoskeletal model, Comput Methods Biomech Biomed Eng, vol.18, pp.1445-1458, 2015.

M. L. Boninger, B. E. Dicianno, R. A. Cooper, J. D. Towers, A. M. Koontz et al., Shoulder Magnetic Resonance Imaging Abnormalities, Wheelchair Propulsion, and Gender1, Arch. Phys. Med. Rehabil, vol.84, issue.11, pp.1615-1620, 2003.

J. L. Mercer, M. Boninger, A. Koontz, D. Ren, T. Dyson-hudson et al., Shoulder Joint Kinetics and Pathology in Manual Wheelchair Users, Clin. Biomech, vol.21, issue.8, pp.781-789, 2006.

K. A. Curtis, G. A. Drysdale, R. D. Lanza, M. Kolber, R. S. Vitolo et al., Shoulder Pain in Wheelchair Users with Tetraplegia and Paraplegia, Arch. Phys. Med. Rehabil, vol.80, issue.4, pp.453-457, 1999.

M. A. Finley and M. M. Rodgers, Prevalence and Identification of Shoulder Pathology in Athletic and Nonathletic Wheelchair Users with Shoulder Pain: A Pilot Study, J. Rehabil. Res. Dev, vol.41, issue.3B, pp.395-402, 2004.

O. W. Heyward, R. J. Vegter, S. Groot, L. H. Woude, and . Van-der, Shoulder Complaints in Wheelchair Athletes: A Systematic Review, PLOS ONE, vol.12, issue.11, p.188410, 2017.

D. Blana, J. G. Hincapie, E. K. Chadwick, and R. F. Kirsch, A Musculoskeletal Model of the Upper Extremity for Use in the Development of Neuroprosthetic Systems, J. Biomech, vol.41, issue.8, pp.1714-1721, 2008.

B. Odle, J. Reinbolt, G. Forrest, and T. Dyson-hudson, Construction and Evaluation of a Model for Wheelchair Propulsion in an Individual with Tetraplegia, Med. Biol. Eng. Comput, 2018.

S. Van-drongelen, L. H. Van-der-woude, T. W. Janssen, E. L. Angenot, E. K. Chadwick et al., Glenohumeral Contact Forces and Muscle Forces Evaluated in Wheelchair-Related Activities of Daily Living in Able-Bodied Subjects Versus Subjects With Paraplegia and Tetraplegia, Arch. Phys. Med. Rehabil, vol.86, issue.7, pp.1434-1440, 2005.

M. Begon, M. S. Andersen, and R. Dumas, Multibody Kinematics Optimization for the Estimation of Upper and Lower Limb Human Joint Kinematics: A Systematized Methodological Review, J. Biomech. Eng, vol.140, issue.3, p.30801, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01719911

T. Lu and J. J. Connor, Bone Position Estimation from Skin Marker Co-Ordinates Using Global Optimisation with Joint Constraints, J. Biomech, vol.32, issue.2, pp.129-134, 1998.

L. Chèze, B. J. Fregly, and J. Dimnet, A Solidification Procedure to Facilitate Kinematics Analyses Based on Video System Data, J. Biomech, vol.28, issue.7, pp.879-884, 1995.

A. Naaim, F. Moissenet, S. Duprey, M. Begon, C. et al., Effect of Various Upper Limb Multibody Models on Soft Tissue Artefact Correction: A Case Study, J. Biomech, vol.62, pp.102-109, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01635819

M. ?enk, C. , and L. , A New Method for Motion Capture of the Scapula Using an Optoelectronic Tracking Device: A Feasibility Study, Comput. Methods Biomech. Biomed. Engin, vol.13, issue.3, pp.397-401, 2010.

K. R. Holzbaur, W. M. Murray, and S. L. Delp, A Model of the Upper Extremity for Simulating Musculoskeletal Surgery and Analyzing Neuromuscular Control, Ann. Biomed. Eng, vol.33, issue.6, pp.829-840, 2005.

K. R. Saul, X. Hu, C. M. Goehler, M. E. Vidt, M. Daly et al., Benchmarking of Dynamic Simulation Predictions in Two Software Platforms Using an Upper Limb Musculoskeletal Model, Comput. Methods Biomech. Biomed. Engin, vol.18, issue.13, pp.1445-1458, 2015.

F. C. Van-der-helm, A Finite Element Musculoskeletal Model of the Shoulder Mechanism, J. Biomech, vol.27, issue.5, pp.551-569, 1994.

J. S. Slowik, P. S. Requejo, S. J. Mulroy, and R. R. Neptune, The Influence of Wheelchair Propulsion Hand Pattern on Upper Extremity Muscle Power and Stress, J. Biomech, vol.49, issue.9, pp.1554-1561, 2016.

J. H. De-groot and R. Brand, A Three-Dimensional Regression Model of the Shoulder Rhythm, Clin. Biomech. Bristol Avon, vol.16, issue.9, pp.735-743, 2001.

S. Duprey, A. Naaim, F. Moissenet, M. Begon, C. et al., Kinematic Models of the Upper Limb Joints for Multibody Kinematics Optimisation: An Overview, J. Biomech, vol.62, pp.87-94, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01635103

A. Seth, M. Sherman, P. Eastman, and S. Delp, Minimal Formulation of Joint Motion for Biomechanisms, Nonlinear Dyn, vol.62, issue.1, pp.291-303, 2010.

A. Seth, R. Matias, A. P. Veloso, and S. L. Delp, A Biomechanical Model of the Scapulothoracic Joint to Accurately Capture Scapular Kinematics during Shoulder Movements, PLOS ONE, vol.11, issue.1, p.141028, 2016.

G. Wu, F. C. Van-der-helm, H. E. Veeger, M. Makhsous, P. Van-roy et al., ISB Recommendation on Definitions of Joint Coordinate Systems of Various Joints for the Reporting of Human Joint Motion--Part II: Shoulder, Elbow, Wrist and Hand, and International Society of Biomechanics, vol.38, pp.981-992, 2005.

A. F. Shaheen, C. M. Alexander, and A. M. Bull, Tracking the Scapula Using the Scapula Locator with and without Feedback from Pressure-Sensors: A Comparative Study, J. Biomech, vol.44, issue.8, pp.1633-1636, 2011.

M. Lempereur, S. Brochard, L. Mao, and O. Rémy-néris, Validity and Reliability of Shoulder Kinematics in Typically Developing Children and Children with Hemiplegic Cerebral Palsy, J. Biomech, vol.45, issue.11, pp.2028-2034, 2012.

S. L. Delp, F. C. Anderson, A. S. Arnold, P. Loan, A. Habib et al., OpenSim: Open-Source Software to Create and Analyze Dynamic Simulations of Movement, IEEE Trans. Biomed. Eng, vol.54, issue.11, pp.1940-1950, 2007.

A. N. Vasavada, S. Li, and S. L. Delp, Influence of Muscle Morphometry and Moment Arms on the Moment-Generating Capacity of Human Neck Muscles, Spine, vol.23, issue.4, pp.412-422, 1998.

F. Netter, Atlas d'anatomie humaine, 2011.

I. Söderkvist and P. A. Wedin, Determining the Movements of the Skeleton Using Well-Configured Markers, J. Biomech, vol.26, issue.12, pp.1473-1477, 1993.

G. Legnani, F. Casolo, P. Righettini, and B. Zappa, A Homogeneous Matrix Approach to 3D Kinematics and Dynamics -I. Theory, Mech. Mach. Theory, issue.5, pp.573-587, 1996.

A. M. Koontz, R. A. Cooper, M. L. Boninger, A. L. Souza, and B. T. Fay, Scapular Range of Motion in a Quasi-Wheelchair Push, Int. J. Ind. Ergon, vol.33, issue.3, pp.237-248, 2004.

B. A. Slavens, A. Graf, J. Krzak, L. Vogel, and G. F. Harris, Upper Extremity Wheelchair Kinematics in Children with Spinal Cord Injury, 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp.8158-8161, 2011.

M. Bourgain, S. Hybois, P. Thoreux, O. Rouillon, P. Rouch et al., Effect of Shoulder Model Complexity in Upper-Body Kinematics Analysis of the Golf Swing, J. Biomech, vol.75, pp.154-158, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02185700

Y. Blache and M. Begon, Influence of Shoulder Kinematic Estimate on Joint and Muscle Mechanics Predicted by Musculoskeletal Model, IEEE Trans. Biomed. Eng, vol.65, issue.4, pp.715-722, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02127341

M. Laitenberger, M. Raison, D. Périé, and M. Begon, Refinement of the Upper Limb Joint Kinematics and Dynamics Using a Subject-Specific Closed-Loop Forearm Model, Multibody Syst. Dyn, vol.33, issue.4, pp.413-438, 2014.

K. Matsui, K. Shimada, A. , and P. D. , Deviation of Skin Marker from Bone Target during Movement of the Scapula, J. Orthop. Sci, vol.11, issue.2, pp.180-184, 2006.

S. Duprey, L. Cheze, and R. Dumas, Influence of Joint Constraints on Lower Limb Kinematics Estimation from Skin Markers Using Global Optimization, J. Biomech, vol.43, issue.14, pp.2858-2862, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00990413

A. E. Habachi, S. Duprey, L. Chèze, and R. Dumas, Global Sensitivity Analysis of the Kinematics Obtained with a Multi-Body Optimisation Using a Parallel Mechanism of the Shoulder, Comput. Methods Biomech. Biomed. Engin, vol.16, issue.sup1, pp.61-62, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01134373

S. Hybois, A. Lombart, P. Puchaud, J. Bascou, F. Lavaste et al., Effects of Ellipsoid Parameters on Scapula Motion during Manual Wheelchair Propulsion Based on Multibody Kinematics Optimization. A Preliminary Study, Comput. Methods Biomech. Biomed. Engin, vol.20, issue.sup1, pp.107-108, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02184486

J. W. Rankin, A. M. Kwarciak, W. Mark-richter, and R. R. Neptune, The Influence of Altering Push Force Effectiveness on Upper Extremity Demand during Wheelchair Propulsion, J. Biomech, vol.43, issue.14, pp.2771-2779, 2010.

M. M. Morrow, J. W. Rankin, R. R. Neptune, and K. R. Kaufman, A Comparison of Static and Dynamic Optimization Muscle Force Predictions during Wheelchair Propulsion, J. Biomech, vol.47, issue.14, pp.3459-3465, 2014.

J. S. Slowik, J. L. Mcnitt-gray, P. S. Requejo, S. J. Mulroy, and R. R. Neptune, Compensatory Strategies during Manual Wheelchair Propulsion in Response to Weakness in Individual Muscle Groups: A Simulation Study, Clin. Biomech, vol.33, pp.34-41, 2016.

J. A. Reinbolt, J. F. Schutte, J. Benjamin, . Fregly, I. I. Byung et al., Determination of Patient-Specific Multi-Joint Kinematic Models through Two-Level Optimization, J. Biomech, vol.38, issue.3, pp.621-626, 2005.

M. S. Andersen, M. Damsgaard, and J. Rasmussen, Kinematic Analysis of Over-Determinate Biomechanical Systems, Comput. Methods Biomech. Biomed. Engin, vol.12, issue.4, pp.371-384, 2009.

M. S. Andersen, D. L. Benoit, M. Damsgaard, D. K. Ramsey, and J. Rasmussen, Do kinematic models reduce the effects of soft tissue artefacts in skin markerbased motion analysis? An in vivo study of knee kinematics, J. Biomech, vol.43, issue.2, pp.268-273, 2010.

Y. Blache, R. Dumas, A. Lundberg, and M. Begon, Main component of soft tissue artifact of the upper-limbs with respect to different functional, daily life and sports movements, J. Biomech, vol.62, pp.39-46, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01627925

M. Bourgain, C. Sauret, P. Rouch, P. Thoreux, and O. Rouillon, Evaluation of the spine axial rotation capacity of golfers and its distribution, 2016.

M. H. Cole and P. N. Grimshaw, The crunch factor's role in golf-related low back pain, Spine J, vol.14, pp.799-807, 2014.

F. Dal-maso, M. Raison, A. Lundberg, A. Arndt, and M. Begon, Coupling between 3D displacements and rotations at the glenohumeral joint during dynamic tasks in healthy participants, Clin. Biomech. Bristol Avon, vol.29, pp.1048-1055, 2014.

S. L. Delp, F. C. Anderson, A. S. Arnold, P. Loan, A. Habib et al., OpenSim: open-source software to create and analyze dynamic simulations of movement, IEEE Trans. Biomed. Eng, vol.54, pp.1940-1950, 2007.

S. Duprey, A. Naaim, F. Moissenet, M. Begon, and L. Chèze, Kinematic models of the upper limb joints for multibody kinematics optimisation: an overview, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01635103

, J. Biomech, vol.62, pp.87-94

C. Egret, F. Dujardin, J. Weber, and D. Chollet, 3D Kinematic analysis of the golf swings of expert and experienced golfers, J. Hum. Movement Stud, 2004.

C. I. Egret, O. Vincent, J. Weber, F. H. Dujardin, and D. Chollet, Analysis of 3D kinematics concerning three different clubs in golf swing, Int. J. Sports Med, vol.24, pp.465-470, 2003.

G. S. Gluck, J. A. Bendo, and J. M. Spivak, The lumbar spine and low back pain in golf: a literature review of swing biomechanics and injury prevention, Spine. J. Off. J. North Am. Spine Soc, vol.8, pp.778-788, 2008.

A. E. Habachi, S. Duprey, L. Cheze, and R. Dumas, A parallel mechanism of the shoulder-application to multi-body optimisation, Multibody Syst. Dyn, vol.33, pp.439-451, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01129014

C. Joyce, A. Burnett, and K. Ball, Methodological considerations for the 3D measurement of the X-factor and lower trunk movement in golf, Sports Biomech, vol.9, pp.206-221, 2010.

A. Healy, K. A. Moran, J. Dickson, C. Hurley, A. F. Smeaton et al., Analysis of the 5 iron golf swing when hitting for maximum distance, J. Sports Sci, vol.29, issue.10, pp.1079-1088, 2011.

Y. Kwon, K. H. Han, C. Como, S. Lee, and K. Singhal, Validity of the X-factor computation methods and relationship between the X-factor parameters and clubhead velocity in skilled golfers, Sports Biomech, vol.12, pp.231-246, 2013.

T. W. Lu and J. J. O'connor, Bone position estimation from skin marker co-ordinates using global optimisation with joint constraints, J. Biomech, vol.32, pp.129-134, 1999.

K. Matsui, K. Shimada, and P. D. Andrew, Deviation of skin marker from bone target during movement of the scapula, J. Orthop. Sci, vol.11, pp.180-184, 2006.

P. W. Mcclure, L. A. Michener, B. J. Sennett, and A. R. Karduna, Direct 3-dimensional measurement of scapular kinematics during dynamic movements in vivo, J. Shoulder Elbow Surg, vol.10, pp.269-277, 2001.

A. Mchardy and H. Pollard, Lower back pain in golfers: a review of the literature, J. Chiropr. Med, vol.4, pp.135-143, 2005.

A. Mchardy, H. Pollard, and K. Luo, Golf injuries: a review of the literature, Sports Med. Auckl. NZ, vol.36, pp.171-187, 2006.

J. Myers, S. Lephart, Y. Tsai, T. Sell, J. Smoliga et al., The role of upper torso and pelvis rotation in driving performance during the golf swing, J. Sports Sci, vol.26, pp.181-188, 2008.

A. Naaim, F. Moissenet, R. Dumas, M. Begon, and L. Chèze, Comparison and validation of five scapulothoracic models for correcting soft tissue artefact through multibody optimisation, Comput. Methods Biomech. Biomed. Engin, vol.18, issue.1, pp.2014-2015, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01844766

A. Naaim, F. Moissenet, S. Duprey, M. Begon, and L. Chèze, Effect of various upper limb multibody models on soft tissue artefact correction: a case study, J. Biomech, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01635819

S. M. Nesbit, A three dimensional kinematic and kinetic study of the golf swing, J. Sports Sci. Med, vol.4, pp.499-519, 2005.

C. Perron, O. Rouillon, and P. Edouard, Epidemiological study on injuries and risk factors for injuries in the amateur golfer French high-level, Ann. Phys. Rehabil. Med, vol.59, 2016.

J. A. Prinold and A. M. Bull, Scaling and kinematics optimisation of the scapula and thorax in upper limb musculoskeletal models, J. Biomech, vol.47, pp.2813-2819, 2014.

M. E. Raabe and A. M. Chaudhari, An investigation of jogging biomechanics using the full-body lumbar spine model: model development and validation, J. Biomech, vol.49, pp.1238-1243, 2016.

M. Senk, . Chèze, and . Laurence, Rotation sequence as an important factor in shoulder kinematics, Clin. Biomech, vol.21, issue.1, pp.3-8, 2006.

A. Seth, R. Matias, A. P. Veloso, and S. L. Delp, A biomechanical model of the scapulothoracic joint to accurately capture scapular kinematics during shoulder movements, PLoS ONE, vol.11, 2016.

B. J. Kemp, A. L. Bateham, and S. J. Mulroy, Effects of reduction in shoulder pain on quality of life and community activities among people living long-term with SCI paraplegia: a randomized control trial, J Spinal Cord Med, vol.34, pp.278-284, 2011.

P. Gorce and N. Louis, Wheelchair propulsion kinematics in beginners and expert users: influence of wheelchair settings, Clin Biomech, vol.27, pp.7-15, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01342184

L. Van-der-woude, A. Bouw, and J. Van-wegen, Seat height: effects on submaximal hand rim wheelchair CHANGES IN WHEELCHAIR BIOMECHANICS DURING LEARNING 7 performance during spinal cord injury rehabilitation, J Rehabil Med, vol.41, pp.143-149, 2009.

J. W. Rankin, A. M. Kwarciak, and W. M. Richter, The influence of wheelchair propulsion technique on upper extremity muscle demand: A simulation study, Clin Biomech, vol.27, pp.879-886, 2012.

M. M. Rodgers, R. E. Keyser, and E. R. Gardner, Influence of trunk flexion on biomechanics of wheelchair propulsion, J Rehabil Res Dev, vol.37, pp.283-295, 2000.

S. De-groot, D. Veeger, and A. P. Hollander, Wheelchair propulsion technique and mechanical efficiency after 3 wk of practice, Med Sci Sports Exerc, vol.34, pp.756-766, 2002.

V. L. Goosey-tolfrey, M. West, and J. P. Lenton, Influence of varied tempo music on wheelchair mechanical efficiency following 3-week practice, Int J Sports Med, vol.32, pp.126-131, 2011.

W. X. Yao, A. Cordova, D. Sola, and W. , The effect of variable practice on wheelchair propulsive efficiency and propulsive timing, Eur J Phys Rehabil Med, vol.48, pp.209-216, 2012.

S. De-groot, M. De-bruin, and S. P. Noomen, Mechanical efficiency and propulsion technique after 7 weeks of lowintensity wheelchair training, Clin Biomech, vol.23, pp.434-441, 2008.

R. Vegter, C. J. Lamoth, and S. De-groot, Inter-individual differences in the initial 80 minutes of motor learning of handrim wheelchair propulsion, PLoS One, vol.9, p.89729, 2014.

R. Vegter, S. De-groot, and C. J. Lamoth, Initial skill acquisition of handrim wheelchair propulsion: a new perspective, IEEE Trans Neural Syst Rehabil Eng, vol.22, pp.104-113, 2014.

F. Ch-enier, A. Champagne, and G. Desroches, Unmatched speed perceptions between overground and treadmill manual wheelchair propulsion in long-term manual wheelchair users, Gait Posture, vol.61, pp.398-402, 2018.

C. Sauret, P. Vaslin, and R. Dumas, Computation of the mechanical power of a manual wheelchair user in actual conditions: preliminary results, Comput Methods Biomech Biomed Eng, vol.15, pp.173-174, 2012.

O. Freixes, . Fern, . Sa, and M. A. Gatti, Wheelchair axle position effect on start-up propulsion performance of persons with tetraplegia, J Rehabil Res Dev, vol.47, pp.661-668, 2010.

M. L. Boninger, M. Baldwin, and R. A. Cooper, Manual wheelchair pushrim biomechanics and axle position, Arch Phys Med Rehabil, vol.81, pp.608-613, 2000.

C. Sauret, P. Vaslin, and F. Lavaste, Effects of user's actions on rolling resistance and wheelchair stability during handrim wheelchair propulsion in the field, Med Eng Phys, vol.35, pp.289-297, 2013.

C. Sauret, P. Vaslin, and J. Bascou, Proposal of an index for evaluating pitch instability during actual locomotion with a manual wheelchair, Comput Methods Biomech Biomed Eng, vol.16, pp.130-131, 2013.

R. Vegter, J. Hartog, and S. De-groot, Early motor learning changes in upper-limb dynamics and shoulder complex loading during handrim wheelchair propulsion, J Neuro Eng Rehabil, vol.12, p.26, 2015.

M. Dabonneville, P. Vaslin, and P. Kauffmann, A self-contained wireless wheelchair ergometer designed for biomechanical measures in real life conditions, Technol Disabil, vol.17, pp.63-76, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00117441

C. Sauret, M. Dabonneville, and Y. Cou-etard, Zeroing of sixcomponent handrim dynamometer for biomechanical studies of manual wheelchair locomotion, Comput Methods Biomech Biomed Eng, vol.17, pp.416-422, 2014.

C. Sauret, Y. Couetard, and P. Vaslin, Dynamic calibration of a wheelchair six-component wheel dynamometer rolling on the floor, Comput Methods Biomech Biomed Eng, vol.14, pp.67-69, 2011.

M. L. Boninger, A. L. Souza, and R. A. Cooper, Propulsion patterns and pushrim biomechanics in manual wheelchair propulsion, Arch Phys Med Rehabil, vol.83, pp.718-723, 2002.

R. A. Cooper, C. P. Digiovine, and M. L. Boninger, Filter frequency selection for manual wheelchair biomechanics, J Rehabil Res Dev, vol.39, pp.323-336, 2002.

G. Legnani, F. Casolo, and P. Righettini, A homogeneous matrix approach to 3D kinematics and dynamics -I. Theory. Mech Mach Theor, vol.31, pp.573-587, 1996.

M. L. Boninger, R. A. Cooper, and M. A. Baldwin, Wheelchair pushrim kinetics: body weight and median nerve function, Arch Phys Med Rehabil, vol.80, pp.910-915, 1999.

A. J. Dallmeijer, L. Van-der-woude, and D. Veeger, Effectiveness of force application in manual wheelchair propulsion in persons with spinal cord injuries, Am J Phys Med Rehabil, vol.77, pp.213-221, 1998.

C. Lin, P. Lin, and F. Su, Biomechanics of wheelchair propulsion, J Mech Med Biol, vol.9, pp.229-242, 2009.

A. M. Kwarciak, S. A. Sisto, and M. Yarossi, Redefining the manual wheelchair stroke cycle: identification and impact of nonpropulsive pushrim contact, Arch Phys Med Rehabil, vol.90, pp.20-26, 2009.

, Paralyzed Veterans of America Consortium for Spinal Cord Medicine. Preservation of upper limb function following spinal cord injury -a clinical practice guideline for healthcare professionals, J Spinal Cord Med, vol.28, pp.434-470, 2005.

J. S. Slowik, P. S. Requejo, and S. J. Mulroy, The influence of wheelchair propulsion hand pattern on upper extremity muscle power and stress, J Biomech, vol.49, pp.1554-1561, 2016.

J. P. Lenton, L. Van-der-woude, and N. E. Fowler, Hand-rim forces and gross mechanical efficiency at various frequencies of wheelchair propulsion, Int J Sports Med, vol.34, pp.158-164, 2013.

M. B. Sabick, K. D. Zhao, and K. N. An, A comparison of methods to compute the point of force application in handrim wheelchair propulsion: a technical note, J Rehabil Res Dev, vol.38, pp.57-68, 2001.

S. De-groot, R. Vegter, and L. Van-der-woude, Effect of wheelchair mass, tire type and tire pressure on physical strain and wheelchair propulsion technique, Med Eng Phys, vol.35, pp.1476-1482, 2013.

B. S. Mason, M. Lemstra, and L. Van-der-woude, Influence of wheel configuration on wheelchair basketball performance: wheel stiffness, tyre type and tyre orientation, Med Eng Phys, vol.37, pp.392-399, 2015.

S. Hybois, A. Siegel, and J. Bascou, Shoulder kinetics during start-up and propulsion with a manual wheelchair within the initial phase of uninstructed training, Disabil Rehabil Assist Technol, vol.19, pp.1-10, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02185659

R. L. Kirby, C. Smith, and R. Seaman, The manual wheelchair wheelie: a review of our current understanding of an important motor skill, Disabil Rehabil Assist Technol, vol.1, pp.119-127, 2006.

E. Hong, J. Pearlman, and B. Salatin, Design and development of a lightweight, durable, adjustable composite backrest mounting, Assist Technol, vol.23, pp.24-35, 2011.

S. J. Mulroy, C. J. Newsam, and D. D. Gutierrez, Effect of fore-aft seat position on shoulder demands during wheelchair propulsion: part 1. A kinetic analysis, J Spinal Cord Med, vol.28, pp.214-221, 2005.

B. R. Kotajarvi, M. Sabick, and J. Basford, The effect of wheelchair seat position on peak shoulder joint moments during propulsion up an incline, Arch Phys Med Rehabil, vol.84, p.30, 2003.

. Saul, Comput Methods Biomech Biomed Eng, vol.18, pp.1445-1458, 2015.

. Holzbaur, Annals of Biomedical Engineering, vol.33, issue.6, pp.829-840, 2005.

. Koontz, International Journal of Industrial Ergonomics, vol.33, pp.237-248, 2004.

. Hybois, Disability and Rehabilitation: Assistive Technology, 2017.

. Seth, Computer methods in BiomeChaniCs and BiomediCal engineering, vol.11, issue.1, 2016.

, , vol.20, pp.107-108

R. Delp, S. L. Anderson, F. C. Arnold, A. S. Loan, P. Habib et al., OpenSim: Open-Source Software to Create and Analyze Dynamic Simulations of Movement, IEEE Transactions on Bio-Medical Engineering, vol.54, issue.11, pp.1940-50, 2007.

S. Duprey, A. Naaim, F. Moissenet, M. Begon, and L. Chèze, Kinematic Models of the Upper Limb Joints for Multibody Kinematics Optimisation: An Overview, Journal of Biomechanics, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01635103

K. Holzbaur, W. M. Murray, and S. L. Delp, A Model of the Upper Extremity for Simulating Musculoskeletal Surgery and Analyzing Neuromuscular Control, Annals of Biomedical Engineering, vol.33, issue.6, pp.829-869, 2005.

A. Naaim, F. Moissenet, S. Duprey, M. Begon, and L. Chèze, Effect of Various Upper Limb Multibody Models on Soft Tissue Artefact Correction: A Case Study, Journal of Biomechanics, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01635819

A. Seth, R. Matias, A. P. Veloso, and S. L. Delp, A Biomechanical Model of the Scapulothoracic Joint to Accurately Capture Scapular Kinematics during Shoulder Movements, PLOS ONE, vol.11, issue.1, 2016.

F. Van-der-helm, A Finite Element Musculoskeletal Model of the Shoulder Mechanism, Journal of Biomechanics, vol.27, issue.5, pp.551-555, 1994.

R. Delp, S. L. Anderson, F. C. Arnold, A. S. Loan, P. Habib et al., OpenSim: open-source software to create and analyze dynamic simulations of movement, IEEE Trans Biomed Eng, vol.54, pp.1940-1950, 2007.

S. Duprey, A. Naaim, F. Moissenet, M. Begon, and L. Chèze, Kinematic models of the upper limb joints for multibody kinematics optimisation: an overview, J Biomech, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01635103

J. H. De-groot and R. Brand, A three-dimensional regression model of the shoulder rhythm, Clin Biomech Bristol Avon, vol.16, pp.735-743, 2001.

K. Holzbaur, W. M. Murray, and S. L. Delp, A model of the upper extremity for simulating musculoskeletal surgery and analyzing neuromuscular control, Ann Biomed Eng, vol.33, pp.829-840, 2005.

A. M. Koontz, R. A. Cooper, M. L. Boninger, A. L. Souza, and B. T. Fay, Scapular range of motion in a quasi-wheelchair push, Int J Ind Ergon, vol.33, pp.237-248, 2004.

A. Naaim, F. Moissenet, S. Duprey, M. Begon, and L. Chèze, Effect of various upper limb multibody models on soft tissue artefact correction: A case study, J Biomech, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01635819

A. Seth, R. Matias, A. P. Veloso, and S. L. Delp, A biomechanical model of the scapulothoracic joint to accurately capture scapular kinematics during shoulder movements, PLOS ONE, vol.11, p.141028, 2016.

. Ferrarra, Paraplegia, vol.28, pp.335-341, 1990.

. Van-andel, Gait Posture, vol.29, issue.1, pp.123-151, 2009.

. Wu, J Biomech, vol.38, pp.981-992, 2005.

. Seth, PLos ONE, vol.11, issue.1, p.14102, 2016.

R. , Hum Mov Sci, vol.31, issue.2, pp.397-407, 2012.

. Meskers, J Biomech, vol.40, issue.4, pp.941-987, 2006.

M. References-dabonneville, A self-contained wireless wheelchair ergometer designed for biomechanical measures in real life conditions, Technology and Disability, vol.17, pp.63-76, 2005.

S. Hybois, Shoulder kinetics during start-up and propulsion with a manual wheelchair within the initial phase of uninstructed training, Disability and Rehabilitation: Assistive Technology, vol.13, pp.40-46, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02185659

J. L. Mercer, Shoulder joint kinetics and pathology in manual wheelchair users, Journal of Rehabilitation Research and Development, vol.41, pp.395-402, 2006.

C. Sauret, Effects of user's actions on rolling resistance and wheelchair stability during handrim wheelchair propulsion in the field, Medical Engineering and Physics, vol.35, pp.289-297, 2013.

R. Van-der-slikke, Wheelchair mobility performance enhancement by changing wheelchair properties; what is the effect of grip, seat height and mass?, International Journal of Sports Physiology and Performance, vol.13, issue.8, pp.1050-58, 2018.

M. Ackermann, F. Leonardi, H. R. Costa, and A. T. Fleury, Modeling and optimal control formulation for manual wheelchair locomotion : The influence of mass and slope on performance, 5th IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics, pp.1079-1084, 2014.

M. Ackermann, . Van-den, and A. J. Bogert, Optimality principles for model-based prediction of human gait, Journal of Biomechanics, vol.43, issue.6, pp.1055-1060, 2010.

A. Assi, C. Sauret, A. Massaad, Z. Bakouny, H. Pillet et al., Validation of hip joint center localization methods during gait analysis using 3D EOS imaging in typically developing and cerebral palsy children, Gait & posture, vol.48, pp.30-35, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02181648

J. Bascou, Analyse biomécanique pour la compréhension et l'amélioration du fauteuil roulant dans son application au tennis de haut niveau, 2012.

J. Bascou, H. Pillet, K. Kollia, C. Sauret, P. Thoreux et al., Turning resistance of a manual wheelchair : a theoretical study, Computer Methods in Biomechanics and Biomedical Engineering, vol.17, issue.sup1, pp.94-95, 2014.

J. Bascou, C. Sauret, S. Hybois, and H. Pillet, Effet du carrossage en fauteuil roulant : une approche numérique, Science & Sports, vol.33, p.22, 2018.

J. Bascou, C. Sauret, F. Lavaste, and H. Pillet, Is bearing resistance negligible during wheelchair locomotion ? Design and validation of a testing device, Acta of bioengineering and biomechanics, vol.19, issue.3, pp.165-176, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02196782

Y. Blache and M. Begon, Influence of shoulder kinematic estimate on joint and muscle mechanics predicted by musculoskeletal model, IEEE Transactions on Biomedical Engineering, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02127341

M. L. Boninger, M. Baldwin, R. A. Cooper, A. Koontz, C. et al., Manual wheelchair pushrim biomechanics and axle position. Archives of physical medicine and rehabilitation, vol.81, pp.608-621, 2000.

M. L. Boninger, B. E. Dicianno, R. A. Cooper, J. D. Towers, A. M. Koontz et al., , 2003.

, Shoulder magnetic resonance imaging abnormalities, wheelchair propulsion, and gender, Archives of Physical Medicine and Rehabilitation, vol.84, issue.11, pp.1615-1620

M. L. Boninger, A. L. Souza, R. A. Cooper, S. G. Fitzgerald, A. M. Koontz et al., Propulsion patterns and pushrim biomechanics in manual wheelchair propulsion. Archives of physical medicine and rehabilitation, vol.83, pp.718-741, 2002.

M. Bourgain, S. Hybois, P. Thoreux, O. Rouillon, P. Rouch et al., Effect of shoulder model complexity in upper-body kinematics analysis of the golf swing, Journal of Biomechanics, vol.75, pp.154-158, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02185700

M. D. Breteler, C. W. Spoor, . Van-der, and F. C. Helm, Measuring muscle and joint geometry parameters of a shoulder for modeling purposes, Journal of biomechanics, vol.32, issue.11, pp.1191-1198, 1999.

S. Brochard, M. Lempereur, and O. Rémy-néris, Accuracy and reliability of three methods of recording scapular motion using reflective skin markers, Proceedings of the Institution of Mechanical Engineers. Part H, vol.225, pp.100-105, 2011.

C. Brown, Predictive Forward Dynamic Simulation of Manual Wheelchair Propulsion, 2018.

A. Cappozzo, U. Della-croce, A. Leardini, and L. Chiari, Human movement analysis using stereophotogrammetry, Gait & Posture, vol.21, issue.2, pp.186-196, 2005.

S. Cerquiglini, F. Figura, M. Marchetti, and B. Ricci, Biomechanics of wheelchair propulsion, Proceedings of the Seventh International Congress of Biomechanics, vol.3, pp.410-419, 1981.

I. W. Charlton and G. R. Johnson, A model for the prediction of the forces at the glenohumeral joint, Proceedings of the Institution of Mechanical Engineers, vol.220, pp.801-812, 2006.

Y. Chen, M. J. Devivo, J. , and A. B. , Pressure ulcer prevalence in people with spinal cord injury : age-period-duration effects. Archives of physical medicine and rehabilitation, vol.86, pp.1208-1221, 2005.

F. Chénier, P. Bigras, A. , and R. , A new dynamic model of the wheelchair propulsion on straight and curvilinear level-ground paths, Computer Methods in Biomechanics and Biomedical Engineering, vol.18, issue.10, pp.1031-1043, 2015.

C. E. Clauser, J. T. Mcconville, Y. , and J. W. , Weight, volume and center of mass of segments of the human body, 1969.

P. Coelho and U. Nunes, Path-following control of mobile robots in presence of uncertainties, IEEE Transactions on Robotics, vol.21, issue.2, pp.252-261, 2005.

J. L. Collinger, M. L. Boninger, A. M. Koontz, R. Price, S. A. Sisto et al., Shoulder biomechanics during the push phase of wheelchair propulsion : a multisite study of persons with paraplegia. Archives of physical medicine and rehabilitation, vol.89, pp.667-76, 2008.

R. A. Cooper, A systems approach to the modeling of racing wheelchair propulsion, Journal of rehabilitation research and development, vol.27, issue.2, pp.151-62, 1990.

R. A. Cooper, A perspective on the ultralight wheelchair revolution, Technology and Disability, vol.5, pp.383-92, 1996.

R. A. Cooper, SMARTWheel : From concept to clinical practice, Prosthetics and orthotics international, vol.33, issue.3, pp.198-209, 2009.

R. A. Cooper, M. L. Boninger, S. D. Shimada, and B. M. Lawrence, Glenohumeral joint kinematics and kinetics for three coordinate system representations during wheelchair propulsion. American journal of physical medicine & rehabilitation, vol.78, pp.435-481, 1999.

R. A. Cooper, R. N. Robertson, D. P. Vansickle, M. L. Boninger, and S. D. Shimada, , 1997.

, Methods for determining three-dimensional wheelchair pushrim forces and moments : a technical note, Journal of rehabilitation research and development, vol.34, issue.2, pp.162-70

C. A. Coulomb, Théorie des machines simples, Mémoires de Mathématique et de Physique de l'Académie des Sciences, t. 10, pp.161-331, 1785.

R. D. Crowninshield, Use of Optimization Techniques to Predict Muscle Forces, Journal of Biomechanical Engineering, vol.100, issue.2, p.88, 1978.

R. D. Crowninshield and R. A. Brand, A physiologically based criterion of muscle force prediction in locomotion, Journal of Biomechanics, vol.14, issue.11, pp.793-801, 1981.

R. D. Crowninshield and R. A. Brand, The prediction of forces in joint structures ; distribution of intersegmental resultants. Exercise and sport sciences reviews, vol.9, pp.159-81, 1981.

V. I. Cuerva, M. Ackermann, and F. Leonardi, The influence of speed and slope angle on wheelchair propulsion patterns : an optimal control study, Procceedings of the 24th ABCM International Congress of Mechanical Engineering, 2017.

K. A. Curtis, G. A. Drysdale, R. Lanza, M. Kolber, R. S. Vitolo et al., Shoulder pain in wheelchair users with tetraplegia and paraplegia, Archives of Physical Medicine and Rehabilitation, vol.80, issue.4, pp.453-457, 1999.

M. Dabonneville, P. Kauffmann, P. Vaslin, N. De-saint-rémy, Y. Couétard et al., A self-contained wireless wheelchair ergometer designed for biomechanical measures in real life conditions, Technology and Disability, vol.17, issue.2, pp.63-76, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00117441

A. J. Dallmeijer, L. H. Van-der-woude, H. E. Veeger, and A. P. Hollander, Effectiveness of force application in manual wheelchair propulsion in persons with spinal cord injuries, American journal of physical medicine & rehabilitation, vol.77, issue.3, pp.213-234, 1998.

J. H. De-groot and R. Brand, A three-dimensional regression model of the shoulder rhythm, Clinical Biomechanics, vol.16, issue.9, pp.735-778, 2001.

C. De-la-cruz, T. F. Bastos, and R. Carelli, Adaptive motion control law of a robotic wheelchair, Control Engineering Practice, vol.19, issue.2, pp.113-125, 2011.

P. De-leva, Adjustments to Zatsiorsky-Seluyanov's segment inertia parameters, Journal of biomechanics, vol.29, issue.9, pp.1223-1253, 1996.

W. De-vries, H. Veeger, A. Cutti, C. Baten, and F. Helm, Functionally interpretable local coordinate systems for the upper extremity using inertial & magnetic measurement systems, Journal of Biomechanics, vol.43, issue.10, pp.1983-1988, 2010.

S. L. Delp, F. C. Anderson, A. S. Arnold, P. Loan, A. Habib et al., OpenSim : open-source software to create and analyze dynamic simulations of movement, IEEE transactions on bio-medical engineering, vol.54, issue.11, pp.1940-50, 2007.

G. Desroches, R. Aissaoui, and D. Bourbonnais, Effect of system tilt and seat-to-backrest angles on load sustained by shoulder during wheelchair propulsion, The Journal of Rehabilitation Research and Development, vol.43, issue.7, p.871, 2006.

G. Desroches, R. Aissaoui, and D. Bourbonnais, Relationship Between Resultant Force at the Pushrim and the Net Shoulder Joint Moments During Manual Wheelchair Propulsion in Elderly Persons, Archives of Physical Medicine and Rehabilitation, vol.89, issue.6, pp.1155-1161, 2008.

G. Desroches, R. Aissaoui, and D. Bourbonnais, The Effect of Resultant Force at the Pushrim on Shoulder Kinetics During Manual Wheelchair Propulsion : A Simulation Study, IEEE Transactions on Biomedical Engineering, vol.55, issue.4, pp.1423-1431, 2008.

C. P. Digiovine, L. Rosen, T. Berner, K. Betz, T. Roesler et al., RESNA Position on the Application of Ultralight Manual Wheelchairs, 2012.

N. Doriot and L. Chèze, A three-dimensional kinematic and dynamic study of the lower limb during the stance phase of gait using an homogeneous matrix approach, IEEE transactions on bio-medical engineering, vol.51, issue.1, pp.21-28, 2004.

S. R. Dubowsky, J. Rasmussen, S. A. Sisto, and N. A. Langrana, Validation of a musculoskeletal model of wheelchair propulsion and its application to minimizing shoulder joint forces, Journal of Biomechanics, vol.41, issue.14, pp.2981-2988, 2008.

R. Dumas, R. Aissaoui, and J. A. De-guise, A 3D generic inverse dynamic method using wrench notation and quaternion algebra, Computer methods in biomechanics and biomedical engineering, vol.7, issue.3, pp.159-66, 2004.

R. Dumas, L. Chèze, and J. Verriest, Adjustments to McConville et al. and Young et al. body segment inertial parameters, Journal of biomechanics, vol.40, issue.3, pp.543-53, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01977176

S. Duprey, F. Billuart, S. Sah, X. Ohl, T. Robert et al., Three-Dimensional Rotations of the Scapula During Arm Abduction : Evaluation of the Acromion Marker Cluster Method in Comparison With a Model-Based Approach Using Biplanar Radiograph Images, Journal of Applied Biomechanics, vol.31, issue.5, pp.396-402, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01302587

S. Duprey, L. Cheze, and R. Dumas, Influence of joint constraints on lower limb kinematics estimation from skin markers using global optimization, Journal of biomechanics, vol.43, issue.14, pp.2858-62, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00990413

S. Duprey, A. Naaim, F. Moissenet, M. Begon, C. et al., Kinematic models of the upper limb joints for multibody kinematics optimisation : An overview, Journal of biomechanics, vol.62, pp.87-94, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01635103

M. R. Eicholtz, J. J. Caspall, P. V. Dao, S. Sprigle, and A. Ferri, Test method for empirically determining inertial properties of manual wheelchairs, Journal of rehabilitation research and development, vol.49, issue.1, pp.51-62, 2012.

A. El-habachi, S. Duprey, L. Chèze, and R. Dumas, Global sensitivity analysis of the kinematics obtained with a multi-body optimisation using a parallel mechanism of the shoulder, Computer methods in biomechanics and biomedical engineering, vol.16, issue.1, pp.61-63, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01134373

A. El-habachi, S. Duprey, L. Cheze, and R. Dumas, A parallel mechanism of the shoulder-application to multi-body optimisation, Multibody System Dynamics, vol.33, issue.4, pp.439-451, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01129014

J. J. Eng and D. A. Winter, Kinetic analysis of the lower limbs during walking : what information can be gained from a three-dimensional model, Journal of biomechanics, vol.28, issue.6, pp.753-761, 1995.

B. Engström, Un véritable défi pour les utilisateurs de fauteuil roulant manuel. Format Editions, 2009.

N. Eydieux, S. Hybois, A. Siegel, J. Bascou, P. Vaslin et al., , 2019.

, Changes in wheelchair biomechanics within the first 120 minutes of practice : spatiotemporal parameters, handrim forces, motor force, rolling resistance and fore-aft stability, Disability and rehabilitation. Assistive technology, pp.1-9

M. Ezati, B. Ghannadi, and J. Mcphee, A review of simulation methods for human movement dynamics with emphasis on gait, Multibody System Dynamics, 2019.

C. Fallot, Quantification of mechanical energy losses during wheelchair activity, 2016.

A. Faupin, P. Campillo, T. Weissland, P. Gorce, and A. Thevenon, The effects of rear-wheel camber on the mechanical parameters produced during the wheelchair sprinting of handibasketball athletes, Journal of rehabilitation research and development, vol.41, issue.3B, pp.421-429, 2004.

A. Faupin, B. Guillon, and F. Lepoutre, Contraintes et règles usuelles pour le choix et les réglages d'un FRM, pp.241-249, 2011.

M. Finlayson and T. Van-denend, Experiencing the loss of mobility : perspectives of older adults with MS, Disability and Rehabilitation, vol.25, issue.20, pp.1168-1180, 2003.

M. A. Finley, E. K. Rasch, R. E. Keyser, and M. M. Rodgers, The biomechanics of wheelchair propulsion in individuals with and without upper-limb impairment, Journal of rehabilitation research and development, vol.41, issue.3B, pp.385-95, 2004.

T. G. Frank and E. W. Abel, Measurement of the turning, rolling and obstacle resistance of wheelchair castor wheels, Journal of biomedical engineering, vol.11, issue.6, pp.462-468, 1989.

B. Gagnon, L. Noreau, and C. Vincent, Reliability of the seated postural control measure for adult wheelchair users, Disability and rehabilitation, vol.27, issue.24, pp.1479-91, 2005.

B. Gagnon, C. Vincent, and L. Noreau, Adaptation of a seated postural control measure for adult wheelchair users, Disability and rehabilitation, vol.27, issue.16, pp.951-960, 2005.

B. Garner and M. G. Pandy, The Obstacle-Set Method for Representing Muscle Paths in Musculoskeletal Models, Computer Methods in Biomechanics and Biomedical Engineering, vol.3, issue.1, pp.1-30, 2000.

B. A. Garner and M. G. Pandy, Musculoskeletal model of the upper limb based on the visible human male dataset, Computer methods in biomechanics and biomedical engineering, vol.4, issue.2, pp.93-126, 2001.

H. Gellman, I. Sie, and R. L. Waters, Late complications of the weight-bearing upper extremity in the paraplegic patient, Clinical orthopaedics and related research, issue.233, pp.132-137, 1988.

A. Gentile, A. Messina, and A. Trentadue, Dynamic Behaviour of a Mobile Robot Vehicle with a Two Caster and Two Driving Wheel Configuration, Vehicle System Dynamics, vol.25, issue.2, pp.89-112, 1996.

A. Gil-agudo, A. Del-ama-espinosa, E. Pérez-rizo, S. Pérez-nombela, and B. Crespo-ruiz, , 2010.

, Shoulder joint kinetics during wheelchair propulsion on a treadmill at two different speeds in spinal cord injury patients, Spinal cord, vol.48, issue.4, pp.290-296

A. Gil-agudo, A. Del-ama-espinosa, E. Pérez-rizo, S. Pérez-nombela, P. Rodríguez-rodríguez et al., Upper limb joint kinetics during manual wheelchair propulsion in patients with different levels of spinal cord injury, Journal of biomechanics, vol.43, issue.13, pp.2508-2523, 2010.

A. Gil-agudo, M. S. Mozos, B. C. Ruiz, A. J. Del-ama, E. Pérez-rizo et al., Shoulder kinetics and ultrasonography changes after performing a highintensity task in spinal cord injury subjects and healthy controls, Spinal Cord, vol.54, issue.4, pp.277-282, 2016.

A. Gil-agudo, M. Solas-mozos, B. Crespo-ruiz, A. J. Del-ama-eng, E. Parez-rizo et al., Echographic and Kinetic Changes in the Shoulder Joint after Manual Wheelchair Propulsion Under Two Different Workload Settings, Frontiers in Bioengineering and Biotechnology, vol.2, 2014.

M. Giner-pascual, M. Alcanyis-alberola, L. Millan-gonzález, M. Aguilar-rodríguez, and F. Querol, Shoulder pain in cases of spinal injury : influence of the position of the wheelchair seat, International Journal of Rehabilitation Research, vol.34, issue.4, pp.282-291, 2011.

P. Gorce and N. Louis, Wheelchair propulsion kinematics in beginners and expert users : influence of wheelchair settings, Clinical Biomechanics, vol.27, issue.1, pp.7-15, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01342184

N. Groce, From Charity to Disability Rights. Global Initiatives of Rehabilitation International, Rehabilitation International, 1922.

L. Guo, F. Su, A. , and K. , Optimum Propulsion Technique in Different Wheelchair Handrim Diameter, Journal of Medical and Biological Engineering, vol.22, issue.1, pp.1-10, 2002.

L. Guo, F. Su, A. , and K. , Effect of handrim diameter on manual wheelchair propulsion : Mechanical energy and power flow analysis, Clinical Biomechanics, vol.21, issue.2, pp.107-115, 2006.

L. Guo, F. Su, H. Wu, A. , and K. , Mechanical energy and power flow of the upper extremity in manual wheelchair propulsion, Clinical biomechanics, vol.18, issue.2, pp.106-120, 2003.

M. Hajizadeh, B. Michaud, and M. Begon, The effect of intracortical bone pin on shoulder kinematics during dynamic activities, International Biomechanics, vol.6, issue.1, pp.47-53, 2019.

A. V. Hill, The heat of shortening and the dynamic constants of muscle, Proceedings of the Royal Society of London. Series B -Biological Sciences, vol.126, pp.136-195, 1938.

R. N. Hinrichs, Regression equations to predict segmental moments of inertia from anthropometric measurements : An extension of the data of, Journal of Biomechanics, vol.18, issue.8, pp.621-624, 1975.

M. Hofstad and P. E. Patterson, Modelling the propulsion characteristics of a standard wheelchair, Journal of rehabilitation research and development, vol.31, issue.2, pp.129-166, 1994.

K. R. Holzbaur, W. M. Murray, and S. L. Delp, A model of the upper extremity for simulating musculoskeletal surgery and analyzing neuromuscular control, Annals of biomedical engineering, vol.33, issue.6, pp.829-869, 2005.

Y. Huang, L. Guo, C. Tsai, and F. Su, Mechanical energy and power flow analysis of wheelchair use with different camber settings, Computer Methods in Biomechanics and Biomedical Engineering, vol.16, issue.4, pp.403-412, 2013.

C. J. Hughes, W. H. Weimar, P. N. Sheth, and C. E. Brubaker, Biomechanics of wheelchair propulsion as a function of seat position and user-to-chair interface. Archives of physical medicine and rehabilitation, vol.73, pp.263-272, 1992.

S. Hybois, Effet d'un apprentissage autonome de la locomotion en FRM sur les efforts à l'épaule, 2016.

S. Hybois, J. Bascou, F. Lavaste, H. Pillet, and C. Sauret, Sternoclavicular joint unlocking significantly affects shoulder kinetics in manual wheelchair propulsion, 23rd Congress of the European Society of Biomechanics, 2017.

S. Hybois, A. Lombart, P. Puchaud, J. Bascou, F. Lavaste et al., Effects of ellipsoid parameters on scapula motion during manual wheelchair propulsion based on multibody kinematics optimization. A preliminary study, Computer methods in biomechanics and biomedical engineering, vol.20, issue.sup1, pp.107-108, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02184486

S. Hybois, P. Puchaud, M. Bourgain, A. Lombart, J. Bascou et al., Comparison of shoulder kinematic chain models and their influence on kinematics and kinetics in the study of manual wheelchair propulsion, Medical Engineering & Physics, vol.69, pp.153-160, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02186404

S. Hybois, A. Siegel, J. Bascou, N. Eydieux, P. Vaslin et al., , 2018.

, Shoulder kinetics during start-up and propulsion with a manual wheelchair within the initial phase of uninstructed training, Disability and rehabilitation. Assistive technology, vol.13, issue.1, pp.40-46

B. W. Johnson and J. H. Aylor, Dynamic Modeling of an Electric Wheelchair, IEEE Transactions on Industry Applications, IA, vol.21, issue.5, pp.1284-1293, 1985.

A. R. Karduna, P. W. Mcclure, L. A. Michener, and B. Sennett, Dynamic Measurements of Three-Dimensional Scapular Kinematics : A Validation Study, Journal of Biomechanical Engineering, vol.123, issue.2, p.184, 2001.

J. J. Kauzlarich, T. Bruning, and J. G. Thacker, Wheelchair caster shimmy and turning resistance, Journal of rehabilitation research and development, vol.21, issue.2, pp.15-29, 1984.

J. J. Kauzlarich and J. G. Thacker, Wheelchair tire rolling resistance and fatigue, Journal of rehabilitation research and development, vol.22, issue.3, pp.25-41, 1985.

M. Kelly, An Introduction to Trajectory Optimization : How to Do Your Own Direct Collocation, SIAM Review, vol.59, issue.4, pp.849-904, 2017.

A. M. Koontz, R. A. Cooper, M. L. Boninger, A. L. Souza, and B. T. Fay, Shoulder kinematics and kinetics during two speeds of wheelchair propulsion, Journal of rehabilitation research and development, vol.39, issue.6, pp.635-684, 2002.

A. M. Koontz, R. A. Cooper, M. L. Boninger, A. L. Souza, and B. T. Fay, Scapular range of motion in a quasi-wheelchair push, International Journal of Industrial Ergonomics, vol.33, issue.3, pp.237-248, 2004.

A. M. Koontz, R. A. Cooper, M. L. Boninger, Y. Yang, B. G. Impink et al., A kinetic analysis of manual wheelchair propulsion during start-up on select indoor and outdoor surfaces, The Journal of Rehabilitation Research and Development, vol.42, issue.4, p.447, 2005.

B. R. Kotajarvi, M. B. Sabick, K. An, K. D. Zhao, K. R. Kaufman et al., The effect of seat position on wheelchair propulsion biomechanics, Journal of rehabilitation research and development, vol.41, issue.3B, pp.403-417, 2004.

K. Kulig, S. S. Rao, S. J. Mulroy, C. J. Newsam, J. K. Gronley et al., Shoulder joint kinetics during the push phase of wheelchair propulsion, Clinical orthopaedics and related research, issue.354, pp.132-175, 1998.

M. Laitenberger, M. Raison, D. Périé, and M. Begon, Refinement of the upper limb joint kinematics and dynamics using a subject-specific closed-loop forearm model, Multibody System Dynamics, vol.33, issue.4, pp.413-438, 2015.

M. Leary, J. Gruijters, M. Mazur, A. Subic, M. Burton et al., A fundamental model of quasi-static wheelchair biomechanics, Medical Engineering & Physics, vol.34, issue.9, pp.1278-1286, 2012.

F. Lepoutre, Le fauteuil roulant manuel : approche pluridisciplinaire pour l'aide au choix et aux réglages, Le fauteuil roulant manuel : choix et réglages, pp.9-13, 2011.

A. Lombart, A. Siegel, C. Villa, J. Bascou, H. Pillet et al., Evaluation of a scapula spinal marker cluster to track the scapula kinematics during manual wheelchair propulsion, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02179145

, Computer Methods in Biomechanics and Biomedical Engineering, vol.20, issue.sup1, pp.121-122

N. Louis, Analyse biomécanique de la propulsion en fauteuil roulant à mains courante : indices d'évaluation ergonomique, 2010.

T. W. Lu and J. J. Connor, Bone position estimation from skin marker co-ordinates using global optimisation with joint constraints, Journal of biomechanics, vol.32, issue.2, pp.129-163, 1999.

M. A. Martins, M. Ackermann, and F. Leonardi, Effects of a closed-loop partial power assistance on manual wheelchair locomotion, IFAC-PapersOnLine, vol.51, issue.27, pp.350-354, 2018.

B. Mason, L. Van-der-woude, K. Tolfrey, and V. Goosey-tolfrey, The Effects of Rear-Wheel Camber on Maximal Effort Mobility Performance in Wheelchair Athletes, International Journal of Sports Medicine, vol.33, issue.03, pp.199-204, 2012.

L. C. Mâsse, M. Lamontagne, O. 'riain, and M. D. , Biomechanical analysis of wheelchair propulsion for various seating positions, Journal of rehabilitation research and development, vol.29, issue.3, pp.12-28, 1992.

G. Masson, M. Bégin, M. Lopez-poncelas, S. Pelletier, J. Lessard et al., Contribution of limb momentum to power transfer in athletic wheelchair pushing, Journal of Biomechanics, vol.49, issue.13, pp.2577-2583, 2016.

K. Matsui, K. Shimada, A. , and P. D. , Deviation of skin marker from bone target during movement of the scapula, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association, vol.11, issue.2, pp.180-184, 2006.

C. L. Maurer and S. Sprigle, Effect of seat inclination on seated pressures of individuals with spinal cord injury, Physical therapy, vol.84, issue.3, pp.255-61, 2004.

J. T. Mcconville, T. Churchill, I. Kaleps, C. Clauser, and J. Cuzzi, Anthropometric relationships of body and body segment moments of inertia, 1980.

R. Mcglinchey-berroth, L. Morrow, M. Ahlquist, M. Sarkarati, and K. L. Minaker, Late-life spinal cord injury and aging with a long term injury : characteristics of two emerging populations, The journal of spinal cord medicine, vol.18, issue.3, pp.183-93, 1995.

F. O. Medola, V. M. Elui, C. D. Santana, and C. A. Fortulan, Aspects of manual wheelchair configuration affecting mobility : a review, Journal of Physical Therapy Science, vol.26, issue.2, pp.313-321, 2014.

P. J. Mejis, C. A. Van-oers, and H. E. Veeger, The effect of seat height on the physiological response and propulsion technique in wheelchair propulsion, Journal of Rehabilitation Science, vol.2, pp.104-107, 1989.

J. L. Mercer, M. Boninger, A. Koontz, D. Ren, T. Dyson-hudson et al., Shoulder joint kinetics and pathology in manual wheelchair users, Clinical Biomechanics, vol.21, issue.8, pp.781-789, 2006.

Y. Moon, C. Jayaraman, I. Hsu, I. Rice, E. Hsiao-wecksler et al., Variability of peak shoulder force during wheelchair propulsion in manual wheelchair users with and without shoulder pain, Clinical Biomechanics, vol.28, issue.9, pp.967-972, 2013.

D. A. Morrow, L. Y. Guo, K. D. Zhao, F. C. Su, A. et al., A 2-D model of wheelchair propulsion, Disability & Rehabilitation, vol.25, issue.4-5, pp.192-196, 2003.

D. A. Morrow, L. Y. Guo, K. D. Zhao, F. C. Su, A. et al., A 2-D model of wheelchair propulsion, Disability and rehabilitation, vol.25, issue.4-5, pp.192-198, 2003.

M. M. Morrow, K. R. Kaufman, A. , and K. , Scapula kinematics and associated impingement risk in manual wheelchair users during propulsion and a weight relief lift, Clinical Biomechanics, vol.26, issue.4, pp.352-357, 2011.

M. M. Morrow, J. W. Rankin, R. R. Neptune, and K. R. Kaufman, A comparison of static and dynamic optimization muscle force predictions during wheelchair propulsion, Journal of Biomechanics, vol.47, issue.14, pp.3459-3465, 2014.

M. M. Morrow, K. R. Kaufman, A. , and K. , Shoulder model validation and joint contact forces during wheelchair activities, Journal of Biomechanics, vol.43, issue.13, pp.2487-2492, 2010.

S. J. Mulroy, C. J. Newsam, D. Gutierrez, P. Requejo, J. K. Gronley et al., Effect of Fore-Aft Seat Position on Shoulder Demands During Wheelchair Propulsion : Part 1. A Kinetic Analysis, The Journal of Spinal Cord Medicine, vol.28, issue.3, pp.214-221, 2005.

J. M. Munaretto, J. L. Mcnitt-gray, H. Flashner, and P. S. Requejo, Simulated effect of reaction force redirection on the upper extremity mechanical demand imposed during manual wheelchair propulsion, Clinical biomechanics, vol.27, issue.3, pp.255-62, 2012.

A. Naaim, F. Moissenet, S. Duprey, M. Begon, C. et al., Effect of various upper limb multibody models on soft tissue artefact correction : A case study, Journal of biomechanics, vol.62, pp.102-109, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01635819

F. Netter, Atlas d'anatomie humaine, 2011.

B. Odle, G. Forrest, J. Reinbolt, and T. Dyson-hudson, Development of an OpenSim Shoulder Model for Manual Wheelchair Users With Tetraplegia, Biomedical and Biotechnology Engineering, vol.2, pp.541-542, 2011.

B. Odle, J. Reinbolt, G. Forrest, and T. Dyson-hudson, Construction and evaluation of a model for wheelchair propulsion in an individual with tetraplegia, Medical & biological engineering & computing, vol.57, issue.2, pp.519-532, 2019.

O. M. O'reilly, M. P. Sena, B. T. Feeley, and J. C. Lotz, On representations for joint moments using a joint coordinate system, Journal of biomechanical engineering, vol.135, issue.11, p.114504, 2013.

R. Pallarès-lópez, F. Costa-alvim, M. Febrer-nafría, L. Luporini-menegaldo, and J. M. Font-llagunes, Assessment of residual reduction procedures for high-speed tasks, Gait & Posture, vol.73, pp.116-119, 2019.

, Preservation of Upper Limb Function Following Spinal Cord Injury -A Clinical Practice Guideline for Health-Care Professionals, The Journal of Spinal Cord Medicine, vol.28, issue.5, pp.434-470, 2005.

U. J. Park and S. H. Jang, The influence of backrest inclination on buttock pressure, Annals of rehabilitation medicine, vol.35, issue.6, pp.897-906, 2011.

D. Penrod, D. Davy, and D. Singh, An optimization approach to tendon force analysis, Journal of Biomechanics, vol.7, issue.2, pp.123-129, 1974.

A. Perdios, B. J. Sawatzky, and A. W. Sheel, Effects of camber on wheeling efficiency in the experienced and inexperienced wheelchair user, Journal of rehabilitation research and development, vol.44, issue.3, pp.459-66, 2007.

R. Price, Z. R. Ashwell, M. W. Chang, M. L. Boninger, A. M. Koontz et al., , 2007.

, Upper-Limb Joint Power and Its Distribution in Spinal Cord Injured Wheelchair Users : Steady-State Self-Selected Speed Versus Maximal Acceleration Trials, Archives of Physical Medicine and Rehabilitation, vol.88, issue.4, pp.456-463

J. A. Prinold, A. F. Shaheen, and A. M. Bull, Skin-fixed scapula trackers : a comparison of two dynamic methods across a range of calibration positions, Journal of biomechanics, vol.44, issue.10, pp.2004-2011, 2011.

P. Puchaud, Kinematic and muscular modeling of the upper limbs -application to the use of a manual wheelchair, 2017.

P. Puchaud, S. Hybois, A. Lombart, J. Bascou, H. Pillet et al., On the influence of the shoulder kinematic chain on joint kinematics and musculotendon lengths during wheelchair propulsion estimated from multibody kinematics optimization, Journal of Biomechanical Engineering, vol.141, issue.10, p.101005, 2019.

P. Puchaud, C. Sauret, A. Muller, N. Bideau, G. Dumont et al., Evaluation of geometrically calibrated segment lengths : preliminary results on inter-hip, femur and shank cases, 3DAHM 2018 -XV International Symposium on 3D Analysis of Human Movement, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01746054

P. Puchaud, C. Sauret, A. Muller, N. Bideau, G. Dumont et al., Preliminary comparison of EOS-derived and geometrically calibrated segment lengths : inter-hip and femur cases, WCB 2018 -8th World Congress of Biomechanics, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01734986

K. T. Ragnarsson, Medical rehabilitation of people with spinal cord injury during 40 years of academic physiatric practice, American journal of physical medicine & rehabilitation, vol.91, issue.3, pp.231-273, 2012.

A. Rajagopal, C. L. Dembia, M. S. Demers, D. D. Delp, J. L. Hicks et al., Full-Body Musculoskeletal Model for Muscle-Driven Simulation of Human Gait, IEEE Transactions on Biomedical Engineering, vol.63, issue.10, pp.2068-2079, 2016.

J. W. Rankin, A. M. Kwarciak, W. Mark-richter, and R. R. Neptune, The influence of altering push force effectiveness on upper extremity demand during wheelchair propulsion, Journal of Biomechanics, vol.43, issue.14, pp.2771-2779, 2010.

J. W. Rankin, W. M. Richter, and R. R. Neptune, Individual Muscle Contributions to Push and Recovery Subtasks during Wheelchair propulsion, Journal of Biomechanics, vol.44, issue.7, pp.1246-1252, 2011.

P. S. Requejo, J. Furumasu, and S. J. Mulroy, Evidence-Based Strategies for Preserving Mobility for Elderly and Aging Manual Wheelchair Users, Topics in Geriatric Rehabilitation, vol.31, issue.1, pp.26-41, 2015.

W. M. Richter, The effect of seat position on manual wheelchair propulsion biomechanics : a quasi-static model-based approach, Medical engineering & physics, vol.23, issue.10, pp.707-719, 2001.

M. M. Rodgers, G. W. Gayle, S. F. Figoni, M. Kobayashi, J. Lieh et al., Biomechanics of wheelchair propulsion during fatigue. Archives of physical medicine and rehabilitation, vol.75, pp.85-93, 1994.

M. M. Rodgers, R. E. Keyser, E. R. Gardner, P. J. Russell, and P. H. Gorman, Influence of trunk flexion on biomechanics of wheelchair propulsion, Journal of rehabilitation research and development, vol.37, issue.3, pp.283-95, 2000.

M. M. Rodgers, K. J. Mcquade, E. K. Rasch, R. E. Keyser, and M. A. Finley, Upper-limb fatigue-related joint power shifts in experienced wheelchair users and nonwheelchair users, Journal of rehabilitation research and development, vol.40, issue.1, pp.27-37, 2003.

M. M. Rodgers, S. Tummarakota, and J. Lieh, Three-Dimensional Dynamic Analysis of Wheelchair Propulsion, Journal of Applied Biomechanics, vol.14, issue.1, pp.80-92, 1998.

C. F. Roques, Histoire du fauteuil roulant, Le fauteuil roulant, pp.1-7, 1997.

L. A. Rozendaal and D. E. Veeger, Force direction in manual wheel chair propulsion : balance between effect and cost, Clinical biomechanics, issue.1, pp.39-41, 2000.

F. Saillant and P. Fougeyrollas, L'icône du handicap. Reliance, vol.25, p.81, 2007.

K. R. Saul, X. Hu, C. M. Goehler, M. E. Vidt, M. Daly et al., , 2015.

, Benchmarking of dynamic simulation predictions in two software platforms using an upper limb musculoskeletal model, Computer methods in biomechanics and biomedical engineering, vol.18, issue.13, pp.1445-58

C. Sauret, Cinétique et énergétique de la propulsion en fauteuil roulant manuel, 2010.

C. Sauret, J. Bascou, N. De-saint-rémy, H. Pillet, P. Vaslin et al., Assessment of field rolling resistance of manual wheelchairs, Journal of rehabilitation research and development, vol.49, issue.1, pp.63-74, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01086723

C. Sauret, Y. Couetard, and P. Vaslin, Dynamic calibration of a wheelchair six-component wheel dynamometer rolling on the floor, Computer Methods in Biomechanics and Biomedical Engineering, vol.14, issue.sup1, pp.67-69, 2011.

C. Sauret, M. Dabonneville, Y. Couétard, N. De-saint-rémy, P. Kauffmann et al., Dynamic calibration of six-component wheel dynamometers for biomechanical studies of manual wheelchair locomotion, Conference : ASSISTH'2011 : 2°Conférence Internationale sur l'Accessibilité et les Systèmes de Suppléance aux Personnes en Situations de Handicap, 2011.

C. Sauret, H. Pillet, W. Skalli, and M. Sangeux, On the use of knee functional calibration to determine the medio-lateral axis of the femur in gait analysis : Comparison with EOS biplanar radiographs as reference, Gait & posture, vol.50, pp.180-184, 2016.

C. Sauret, P. Vaslin, J. Bascou, H. Pillet, and F. Lavaste, Proposal of an index for evaluating pitch instability during actual locomotion with a manual wheelchair, Computer methods in biomechanics and biomedical engineering, vol.16, issue.1, pp.130-131, 2013.

C. Sauret, P. Vaslin, F. Lavaste, N. De-saint-remy, and M. Cid, Effects of user's actions on rolling resistance and wheelchair stability during handrim wheelchair propulsion in the field, Medical engineering & physics, vol.35, issue.3, pp.289-297, 2013.

G. Schultz and K. Mombaur, Modeling and Optimal Control of Human-Like Running, 2010.

, IEEE/ASME Transactions on Mechatronics, vol.15, issue.5, pp.783-792

M. Sedgwick, A. Frank, P. Kemp, and P. Gage, Improving Services for Wheelchair Users and Carers. Good Practice Guide : Learning from the Wheelchair Services Collaborative, 2005.

A. Seireg and R. Arvikar, The prediction of muscular load sharing and joint forces in the lower extremities during walking, Journal of Biomechanics, vol.8, issue.2, pp.89-102, 1975.

A. Seth, J. L. Hicks, T. K. Uchida, A. Habib, C. L. Dembia et al., OpenSim : Simulating musculoskeletal dynamics and neuromuscular control to study human and animal movement, PLOS Computational Biology, vol.14, issue.7, p.1006223, 2018.

A. Seth, R. Matias, A. P. Veloso, S. L. Delp, J. Harlaar et al., A Biomechanical Model of the Scapulothoracic Joint to Accurately Capture Scapular Kinematics during Shoulder Movements, PLOS ONE, vol.11, issue.1, p.141028, 2016.

A. Seth, M. Sherman, P. Eastman, and S. Delp, Minimal formulation of joint motion for biomechanisms, Nonlinear Dynamics, vol.62, issue.1-2, pp.291-303, 2010.

A. F. Shaheen, C. M. Alexander, and A. M. Bull, Effects of attachment position and shoulder orientation during calibration on the accuracy of the acromial tracker, Journal of biomechanics, vol.44, issue.7, pp.1410-1413, 2011.

A. F. Shaheen, C. M. Alexander, and A. M. Bull, Tracking the scapula using the scapula locator with and without feedback from pressure-sensors : A comparative study, Journal of biomechanics, vol.44, issue.8, pp.1633-1639, 2011.

M. Shields, Use of wheelchairs and other mobility support devices, Health reports, vol.15, issue.3, pp.37-41, 2004.

J. B. Shung, G. Stout, M. Tomizuka, and D. M. Auslander, Dynamic Modeling of a Wheelchair on a Slope, Journal of Dynamic Systems, Measurement, and Control, vol.105, issue.2, p.101, 1983.

I. H. Sie, R. L. Waters, R. H. Adkins, and H. Gellman, Upper extremity pain in the postrehabilitation spinal cord injured patient. Archives of physical medicine and rehabilitation, vol.73, pp.44-52, 1992.

L. C. Silva, F. G. Dedini, F. C. Corrêa, J. J. Eckert, and M. Becker, Measurement of wheelchair contact force with a low cost bench test, Medical engineering & physics, vol.38, issue.2, pp.163-70, 2016.

B. A. Slavens, A. Graf, J. Krzak, L. Vogel, and G. F. Harris, Upper extremity wheelchair kinematics in children with spinal cord injury, Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp.8158-61, 2011.

J. S. Slowik, J. L. Mcnitt-gray, P. S. Requejo, S. J. Mulroy, and R. R. Neptune, Compensatory strategies during manual wheelchair propulsion in response to weakness in individual muscle groups : A simulation study, Clinical Biomechanics, vol.33, pp.34-41, 2016.

J. S. Slowik and R. R. Neptune, A theoretical analysis of the influence of wheelchair seat position on upper extremity demand, Clinical Biomechanics, vol.28, issue.4, pp.378-385, 2013.

J. S. Slowik, P. S. Requejo, S. J. Mulroy, and R. R. Neptune, The influence of wheelchair propulsion hand pattern on upper extremity muscle power and stress, Journal of biomechanics, vol.49, issue.9, pp.1554-1561, 2016.

E. M. Smith, E. M. Giesbrecht, W. B. Mortenson, and W. C. Miller, Prevalence of Wheelchair and Scooter Use Among Community-Dwelling Canadians, Physical Therapy, vol.96, issue.8, pp.1135-1142, 2016.

I. Söderkvist and P. A. Wedin, Determining the movements of the skeleton using wellconfigured markers, Journal of Biomechanics, vol.26, issue.12, pp.1473-1480, 1993.

E. Steinmetz, Americans with Disabilities : 2002, US Census Bureau Current Population Report, pp.70-107, 2002.

E. Teran and J. Ueda, Influence of rolling resistance on manual wheelchair dynamics and mechanical efficiency, International Journal of Intelligent Robotics and Applications, vol.1, issue.1, pp.55-73, 2017.

G. Valente, L. Pitto, R. Stagni, and F. Taddei, Effect of lower-limb joint models on subjectspecific musculoskeletal models and simulations of daily motor activities, Journal of biomechanics, vol.48, issue.16, pp.4198-205, 2015.

C. Van-andel, K. Van-hutten, M. Eversdijk, D. Veeger, and J. Harlaar, Recording scapular motion using an acromion marker cluster, Gait & Posture, vol.29, issue.1, pp.123-131, 2009.

F. C. Van-der-helm, A finite element musculoskeletal model of the shoulder mechanism, Journal of Biomechanics, vol.27, issue.5, pp.551555-553569, 1994.

L. H. Van-der-woude, A. Bouw, J. Van-wegen, H. Van-as, D. Veeger et al., Seat height : effects on submaximal hand rim wheelchair performance during spinal cord injury rehabilitation, Journal of rehabilitation medicine, vol.41, issue.3, pp.143-152, 2009.

S. Van-drongelen, L. H. Van-der-woude, T. W. Janssen, E. L. Angenot, E. K. Chadwick et al., Glenohumeral Contact Forces and Muscle Forces Evaluated in Wheelchair-Related Activities of Daily Living in Able-Bodied Subjects Versus Subjects With Paraplegia and Tetraplegia, Archives of Physical Medicine and Rehabilitation, vol.86, issue.7, pp.1434-1440, 2005.

S. Van-drongelen, L. H. Van-der-woude, T. W. Janssen, E. L. Angenot, E. K. Chadwick et al., Mechanical Load on the Upper Extremity During Wheelchair Activities, Archives of Physical Medicine and Rehabilitation, vol.86, issue.6, pp.1214-1220, 2005.

S. Van-drongelen, L. H. Van-der-woude, and H. E. Veeger, Load on the shoulder complex during wheelchair propulsion and weight relief lifting, Clinical biomechanics, vol.26, issue.5, pp.452-459, 2011.

A. N. Vasavada, S. Li, and S. L. Delp, Influence of muscle morphometry and moment arms on the moment-generating capacity of human neck muscles, Spine, vol.23, issue.4, pp.412-434, 1998.

P. Vaslin, H. Ben-touhami, J. Zhao, C. Sauret, J. Bascou et al., 2-D geometric model of wheelchair adjustment, 5th International State-of-the-Art Congress on Rehabilitation : Mobility, Exercise & Sports, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02059624

D. Veeger, L. H. Van-der-woude, and R. H. Rozendal, The effect of rear wheel camber in manual wheelchair propulsion, Journal of rehabilitation research and development, vol.26, issue.2, pp.37-46, 1989.

H. Veeger, L. Rozendaal, and F. Helm, Load on the shoulder in low intensity wheelchair propulsion, Clinical Biomechanics, vol.17, issue.3, pp.211-218, 2002.

H. E. Veeger, F. C. Van-der-helm, L. H. Van-der-woude, G. M. Pronk, and R. H. Rozendal, Inertia and muscle contraction parameters for musculoskeletal modelling of the shoulder mechanism, Journal of biomechanics, vol.24, issue.7, pp.615-644, 1991.

H. E. Veeger, L. H. Van-der-woude, and R. H. Rozendal, Load on the upper extremity in manual wheelchair propulsion, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology, vol.1, issue.4, pp.270-80, 1991.

R. J. Vegter, J. Hartog, S. De-groot, C. J. Lamoth, M. J. Bekker et al., Early motor learning changes in upperlimb dynamics and shoulder complex loading during handrim wheelchair propulsion, Journal of neuroengineering and rehabilitation, vol.12, p.26, 2015.

N. Vignier, J. Ravaud, M. Winance, F. Lepoutre, and I. Ville, Demographics of wheelchair users in France : Results of national community-based handicaps-incapacités-dépendance surveys, Journal of Rehabilitation Medicine, vol.40, issue.3, pp.231-239, 2008.

I. Ville, J. Ravaud, and D. Mahut, Les utilisateurs du fauteuil roulant en France, Le fauteuil roulant manuel : choix et réglages, pp.59-68, 2011.

P. Westerhoff, F. Graichen, A. Bender, A. Halder, A. Beier et al., Measurement of shoulder joint loads during wheelchair propulsion measured in vivo, Clinical biomechanics, vol.26, issue.10, pp.982-991, 2011.

D. A. Winter, Biomechanics and motor control of human movement, 1990.

D. A. Winter, Biomechanics and motor control of human movement, 2005.

G. Wu, F. C. Van-der-helm, H. Veeger, M. Makhsous, P. Van-roy et al., ISB recommendation on definitions of joint coordinate systems of various joints for the reporting of human joint motion-Part II : shoulder, elbow, wrist and hand, Journal of Biomechanics, vol.38, issue.5, pp.981-992, 2005.

Y. Yang, A. M. Koontz, S. Yeh, C. , and J. , Effect of backrest height on wheelchair propulsion biomechanics for level and uphill conditions. Archives of physical medicine and rehabilitation, vol.93, pp.654-663, 2012.

F. E. Zajac, Muscle and tendon : properties, models, scaling, and application to biomechanics and motor control, Critical reviews in biomedical engineering, vol.17, issue.4, pp.359-411, 1989.

F. E. Zajac, Muscle coordination of movement : a perspective, Journal of biomechanics, p.26, 1993.

F. E. Zajac and M. E. Gordon, Determining muscle's force and action in multi-articular movement. Exercise and sport sciences reviews, vol.17, pp.187-230, 1989.

V. M. Zatsiorsky, V. N. Seluyanov, and L. G. Chugunova, Methods of determining massinertial characteristics of human body segments, Contemporary Problems of Biomechanics, pp.272-291, 1990.