A. Z. Abidin, T. Puspasari, and W. A. Nugroho, Polymers for enhanced oil recovery technology, Procedia Chem, vol.4, pp.11-16, 2012.

S. Abdali, E. Mitsoulis, and N. Markatos, Entry and exit flows of bingham fluids, Journal of Rheology, vol.36, issue.2, pp.389-407, 1992.

R. Aguilera, Incorporating Capillary Pressure, Pore Throat Aperture Radii, Height above Free Water Table, and Windland r35 Values on Pickett Plots, vol.86, pp.605-624

R. I. Al-raoush and I. T. Madhoun, Tort3d: A matlab code to compute geometric tortuosity from 3d imagesof unconsolidated porous media, Powder technology, vol.320, pp.99-107, 2017.

A. N. Alexandrou, E. Duc, and V. Entov, Inertial, viscous and yield stress effects in bingham fluid filling of a 2-d cavity, Journal of non-newtonian fluid mechanics, vol.96, issue.3, pp.383-403, 2001.

A. N. Alexandrou, T. M. Mcgilvreay, and G. Burgos, Steady herschel-bulkley fluid flow in threedimensional expansions, Journal of Non-Newtonian Fluid Mechanics, vol.100, issue.1-3, pp.77-96

K. Allen, T. Von-backström, and D. Kröger, Packed bed pressure drop dependence on particle shape, size distribution, packing arrangement and roughness, Powder Technology, vol.246, pp.590-600, 2013.

A. Ambari, M. Benhamou, S. Roux, and E. Guyon, Distribution des tailles des pores d'un milieu poreux déterminée par l'écoulement d'un fluide à seuil, C.R. Acad. Sci. Paris t, vol.311, pp.1291-1295, 1990.

L. M. Anovitz and D. R. Cole, Characterization and analysis of porosity and pore structures, Reviews in Mineralogy and geochemistry, vol.80, issue.1, pp.61-164, 2015.

N. Atallah and M. Abou-najm, Characterization of synthetic porous media using non-newtonian fluids: experimental evidence, European Journal of Soil Science, vol.70, issue.2, pp.257-267, 2019.

J. E. Atkins and E. F. Mcbride, Porosity and packing of holocene river, dune, and beach sands (1), AAPG Bulletin, vol.76, issue.3, pp.339-355, 1992.

P. Ballesta, G. Petekidis, L. Isa, W. C. Poon, and R. Besseling, Wall slip and flow of concentrated hard-sphere colloidal suspensions, J. Rheol, vol.56, p.1005, 2012.

M. T. Balhoff, L. W. Lake, P. M. Bommer, R. E. Lewis, M. J. Weber et al., Rheological and yield stress measurements of non-Newtonian fluids using a Marsh funnel, J. Petrol. Sci. Eng, vol.77, issue.3-4, pp.393-402, 2011.

M. Balhoff, D. Sanchez-rivera, A. Kwok, Y. Mehmani, and M. Prodanovi´c, Numerical algorithms for network modeling of yield stress and other non-newtonian fluids in porous media, Transport in porous media, vol.93, issue.3, pp.363-379, 2012.

M. T. Balhoff, D. Sanchez-rivera, A. Kwok, Y. Mehmani, and M. Prodanovic, Numerical algorithms for network modelling of yield stress and other non-Newtonian fluids in porous media, Transp. Porous Media, vol.93, issue.3, pp.363-379, 2012.

M. T. Balhoff and K. E. Thompson, Modelling the steady flow of yield-stress fluids in packed beds, AlChE J, vol.50, issue.12, pp.3034-3048, 2004.

M. T. Balhoff and K. E. Thompson, A macroscopic model for shear-thinning flow in packed beds based on network modelling, Chemical Engineering Science, vol.61, pp.698-719, 2006.

H. A. Barnes, J. F. Hutton, and K. Walters, An Introduction to Rheology, 1989.

H. Barnes and K. Walters, The yield stress myth?, Rheol.Acta, vol.24, pp.323-326, 1985.

H. A. Barnes, The yield stress -A review, J. Non-Newt. Fluid Mech, vol.81, pp.133-178, 1999.

H. A. Barnes, A review of the slip (wall depletion) of polymer solutions, emulsions and particle suspensions in viscometers: its cause, character, and cure, J. Non-Newtonian Fluid Mech, vol.56, p.221, 1995.

D. Bauer, L. Talon, Y. Peysson, H. Ly, G. Batôt et al., Experimental and numerical determination of darcy's law for yield stress fluids in porous media, Physical Review Fluids, vol.4, issue.6, p.63301, 2019.

J. Bear, Dynamics of Fluids in Porous Media, 1972.

M. Bercovier and M. Engelman, A finite-element method for incompressible non-newtonian flows, Journal of Computational Physics, vol.36, issue.3, pp.313-326, 1980.

C. R. Beverly and R. I. Tanner, Numerical analysis of extrudate swell in viscoelastic materials with yield stress, J. Rheol, vol.33, pp.989-1009, 1989.

P. Bhattad, C. S. Willson, and K. E. Thompson, Effect of network structure on characterization and flow modeling using x-ray micro-tomography images of granular and fibrous porous media, Transport in porous media, vol.90, p.363, 2011.

E. C. Bingham, «An investigation of the laws of plastic flow, » U. S. Bureau of Standards Bulletin, vol.13, pp.309-353, 1916.

E. C. Bingham, Fluidity and plasticity, 1922.

J. Bleyer and P. Coussot, Breakage of non-newtonian character in flow through a porous medium: evidence from numerical simulation, Physical Review E, vol.89, issue.6, p.63018, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01055574

M. J. Blunt, B. Bijeljic, H. Dong, O. Gharbi, S. Iglauer et al., Pore-scale imaging and modelling, Advances in Water Resources, vol.51, pp.197-216

F. Brochard-wyart and P. G. De-gennes, Shear-dependent slippage at a polymer/solid interface, J. Rheol, vol.8, p.67, 1985.

T. Bultreys, L. Van-hoorebeke, and V. Cnudde, Multi-scale, micro-computed tomography-based pore network models to simulate drainage in heterogeneous rocks, Advances in Water Resources, vol.78, pp.36-49, 2015.

G. R. Burgos and A. N. Alexandrou, Flow development of herschel-bulkley fluids in a sudden three dimensional square expansion, Journal of rheology, vol.43, issue.3, pp.485-498, 1999.

G. R. Burgos, A. N. Alexandrou, and V. Entov, On the determination of yield surfaces in herschelbulkley fluids, Journal of Rheology, vol.43, issue.3, pp.463-483, 1999.

P. C. Carman, «Determination of the specific surface of powders, J. Soc. Chem. Indus, vol.57, pp.225-234, 1938.

P. C. Carman, Flow of gases through porous media, 1956.

P. C. Carman, «Fluid flow through granular beds, » Trans. Inst. Chem. Engin, vol.15, pp.154-155, 1937.

N. Casson, «A flow equation for pigment-oil suspensions of the printing ink type, British Society of Rheology Proc., Rheology of Disperse Systems, pp.84-104, 1959.

G. Chang, J. Koo, and K. Song, Wall slip of vaseline in steady shear rheometry, Korea-Australia Rheology Journal, vol.15, issue.2, pp.55-61, 2003.

G. Chauveteau and N. Kohler, Influence of microgels in polysaccharide solutions on their flow behavior through porous media, Society of Petroleum Engineers Journal, vol.24, issue.03, pp.361-368

G. Chauveteau and . Rodlike, Polymer Solution Flow through Fine Pores: Influence of Pore Size on Rheological Behavior, Journal of Rheology, vol.26, issue.2, pp.111-142, 1982.

G. Chauveteau, M. Tirrell, and A. Omari, Concentration dependence of the effective viscosity of polymer solutions in small pores with repulsive or attractive walls, Journal of colloid and interface science, vol.100, issue.1, pp.41-54, 1984.

G. Chauveteau and A. Zaitoun, Basic rheological behavior of xanthan polysaccharide solutions in porous media: effects of pores size and polymer concentration, Proceedings of the First European Symposium on EOR, 1981.

R. P. Chhabra and J. F. Et-richardson, Non-Newtonian flow in the process industries : fundamentals and engineering applications, p.81, 1999.

M. Chen, W. Rossen, and Y. C. Yortsos, The flow and displacement in porous media of fluids with yield stress, Chemical engineering science, vol.60, issue.15, pp.4183-4202, 2005.

T. Chevalier, C. Chevalier, X. Clain, J. C. Dupla, J. Canou et al., Darcy's law foryield stress fluid flowing through a porous medium, Journal of Non-Newtonian Fluid Mechanics, vol.195, pp.57-66, 2013.

T. Chevalier and L. Talon, Moving line model and avalanche statistics of bingham fluid flow in porous media, The European Physical Journal E, vol.38, issue.7, p.76, 2015.

R. H. Christopher and S. Middleman, Power-law flow through a packed tube, Ind. Eng. Chem. Fundament, vol.4, issue.4, pp.422-426, 1965.

M. Cieszko, M. Kempi´nski, and T. Czerwi´nski, Limit models of pore space structure of porous materials for determination of limit pore size distributions based on mercury intrusion data, Transport in Porous Media, vol.127, issue.2, pp.433-458, 2019.

Y. Cohen and . A. Metzner, An analysis of apparent slip ow of polymer solutions, Rheologica Acta, vol.25, issue.1, pp.28-35, 1986.

P. Coussot, Yield stress fluid flows: A review of experimental data, J. Non-Newt. Fluid Mech, vol.211, pp.31-49, 2014.

V. S. Craig, C. Neto, and D. R. Williams, Shear-Dependent Boundary Slip in an Aqueous Newtonian Liquid, Physical Review Letters, vol.87, issue.5, p.54504, 2001.

H. J. Darcy, Les Fontaines Publiques de la Vue de Dijon. Libraire de Corps Impériaux des Ponts et Chausées et des Mines, pp.590-594, 1856.

Y. Damianou and G. C. Georgiou, Viscoplastic poiseuille flow in a rectangular duct with wall slip, Journal of Non-Newtonian Fluid Mechanics, vol.214, pp.88-105, 2014.

Y. Damianou, G. Kaoullas, and G. C. Georgiou, Cessation of viscoplastic poiseuille flow in a square duct with wall slip, Journal of Non-Newtonian Fluid Mechanics, vol.233, pp.13-26, 2016.

Y. Damianou, M. Philippou, G. Kaoullas, and G. C. Georgiou, Cessation of viscoplastic poiseuille flow with wall slip, Journal of Non-Newtonian Fluid Mechanics, vol.203, pp.24-37, 2014.

D. De-kee and G. Turcotte, Viscosity of biomaterials, vol.6, pp.273-282, 1980.

C. De-las-cuevas, Pore structure characterization in rock salt, Engineering geology, vol.47, issue.1-2, pp.17-30, 1997.

M. M. Denn and D. Bonn, Issues in the flow of yield-stress liquids, Rheologica acta, vol.50, issue.4, pp.307-315, 2011.

P. R. De-souza-mendes, M. F. Naccache, P. R. Varges, and F. H. Marchesini, Flow of viscoplastic liquids through axisymmetric expansions-contractions, Journal of Non-Newtonian Fluid Mechanics, vol.142, issue.1-3, pp.207-217, 2007.

D. Souza-mendes, P. R. Thompson, and R. L. , A unified approach to model elasto-viscoplastic thixotropic yield-stress materials and apparent-yield stress fluids, Rheol Acta, vol.52, p.200, 2013.

W. Dou, L. Liu, K. Wu, Z. Xu, X. Liu et al., Diagenetic heterogeneity, pore throats characteristic and their effects on reservoir quality of the upper triassic tight sandstones of yanchang formation in ordos basin, china. Marine and Petroleum Geology, vol.98, pp.243-257, 2018.

F. A. Dullien, Porous Media: Fluid Transport and Pore Structure, 1991.

F. A. Dullien, Characterization of porous media -pore level, Transport in Porous Media, vol.6, pp.581-606, 1991.

F. Dullien and G. Dhawan, Photomicrographic size distribution determination of non-spherical objects, Powder Technology, vol.7, issue.6, pp.305-313, 1973.

F. A. Dullien and V. Batra, Determination of the structure of porous media, Industrial & Engineering Chemistry, vol.62, issue.10, pp.25-53, 1970.

J. É. Dupuit, Études théoriques et pratiques sur le mouvement des eaux dans les canaux découverts et à travers les terrains perméables: avec des considérations relatives au régime des grandes eaux, au débouché à leur donner, et à la marche des alluvions dans les rivières à fond mobile. Dunod, 1863.

F. A. Dullien and K. Dhawan, Bivariate Pore-Size Distributions of Some Sandstones, Colloid Interface Sci, vol.52, issue.1, pp.129-135, 1975.

C. Du-toit and P. Rosslee, Analysis of the porous structure of packed beds of spheres using x-ray computed tomography, Eighth South African conference on computational and applied mechanics, 2012.

T. Engin, U. Dogruer, C. Evrensel, and F. Gordaninejad, Effect of wall roughness on laminar flow of bingham plastic fluids through microtubes, Journal of fluids engineering, vol.126, issue.5, pp.880-883, 2004.

S. Ergun, Fluid flow through packed columns, Chem. Eng. Prog, vol.48, pp.89-94, 1952.

A. European-chemicals, Committee for Risk Assessment (RAC) and Committee for Socio-economic Analysis (SEAC), Background document to the opinions on the Annex XV dossier proposing restrictions on Mercury in measuring devices, 2011.

J. H. Ferziger and M. Peric, Computational methods for fluid dynamics, 1997.

A. J. Fletcher, S. R. Flew, S. P. Lamb, T. Lund, E. Bjornestad et al., Measurements of Polysaccharide Polymer Properties in Porous Media. SPE International Symposium on Oilield Chemistry, vol.21018, pp.20-22, 1991.

P. Forchheimer, Wasserbewegung durch boden, Z. Ver. Deutsch, Ing, vol.45, pp.1782-1788, 1901.

A. Fortin, D. Côté, and P. A. Tanguy, On the imposition of friction boundary conditions for the numerical simulation of Bingham fluid flows, Comp. Methods Appl. Mech. Eng, vol.88, p.97, 1991.

J. Fredrich, K. Greaves, and J. Martin, Pore geometry and transport properties of fontainebleau sandstone, International journal of rock mechanics and mining sciences & geomechanics abstracts, vol.30, pp.691-697, 1993.

I. Frigaard and D. Ryan, Flow of a visco-plastic fluid in a channel of slowly varying width, Journal of Non-Newtonian fluid mechanics, vol.123, issue.1, pp.67-83, 2004.

A. Gaither, A study of porosity and grain relationships in experimental sands, Journal of Sedimentary Research, vol.23, issue.3, pp.180-195, 1953.

Z. Gao, X. Yang, C. Hu, L. Wei, Z. Jiang et al., Characterizing the pore structure of low permeability eocene liushagang formation reservoir rocks from beibuwan basin in northern south china sea, Marine and Petroleum Geology, vol.99, pp.107-121, 2019.

H. Giesche and . Mercury-porosimetry, General (Practical) Overview, Part. Part. Syst. Charact, vol.23, pp.1-11, 2006.

H. Green, Further development of the plastometer and its practical application to research and routine problems, Proceedings Am. Soc. Testing Materials, vol.II, p.20, 1920.

A. Gundogar, C. Ross, S. Akin, and A. Kovscek, Multiscale pore structure characterization of middle east carbonates, Journal of Petroleum Science and Engineering, vol.146, pp.570-583, 2016.

Z. Guo, Z. Sun, N. Zhang, M. Ding, and J. Wen, Experimental characterization of pressure drop in slender packed bed (1< d/d< 3), Chemical Engineering Science, vol.173, pp.578-587, 2017.

S. G. Hatzikiriakos and J. M. Dealy, Wall slip of molten high density polyethylene. I. Sliding plate rheometer studies, J. Rheol, vol.35, p.497, 1991.

S. G. Hatzikiriakos and J. M. Dealy, Wall slip of molten high density polyethylenes. II. Capillary rheometer studies, J. Rheol, vol.36, p.703, 1992.

S. G. Hatzikiriakos and I. G. Kazatchkov, Interfacial phenomena in the capillary extrusion of metallocene polyethylenes, J. Rheol, vol.41, p.1299, 1997.

S. G. Hatzikiriakos, Wall slip of molten polymers, Progr. Polym. Sci, vol.37, pp.624-643, 2012.

G. Hay, M. E. Mackay, S. A. Mcglashan, and Y. Park, Comparison of shear stress and wall slip measurement techniques on a linear low density polyethylene, J. Non-Newtonian Fluid Mech, vol.92, p.187, 2000.

J. He, S. S. Lee, and D. M. Kalyon, Shear viscosity and wall slip behavior of dense suspensions of polydisperse particles a, Journal of Rheology, vol.63, issue.1, pp.19-32, 2019.

L. Hermany, D. D. Santos, S. Frey, M. F. Naccache, and P. R. De-souza-mendes, Flow of yield-stress liquids through an axisymmetric abrupt expansion-contraction, Journal of Non-Newtonian Fluid Mechanics, vol.201, pp.1-9, 2013.

W. H. Herschel and R. Bulkley, Konsistenzmessungen von gummi-benzollösungen, Colloid & Polymer Science, vol.39, issue.4, pp.291-300, 1926.

S. Hess, Structure and nonlinear flow behavior of simple and complex fluids, International journal of thermophysics, vol.23, issue.4, pp.905-920, 2002.

D. A. Hill, T. Hasegawa, and M. M. Denn, On the apparent relation between the adhesive failure and melt fracture, J. Rheol, vol.34, p.891, 1990.

A. N. Houston, W. Otten, R. Falconer, O. Monga, P. C. Baveye et al., Quantification of the pore size distribution of soils: assessment of existing software using tomographic and synthetic 3D images, Geoderma, vol.299, pp.73-82, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01533844

Y. Huang and K. S. Sorbie, The Adsorption and In-Situ Rheological Behavior of Xanthan Solution Flowing Through Porous Media. SPE/DOE Enhanced Oil Recovery Symposium, pp.22-24, 1992.

C. C. Huet, J. A. Rushing, K. E. Newsham, and T. A. Blasingame, A Modified Purcell/Burdine Model for Estimating Absolute Permeability from Mercury Injection Capillary Pressure Data, Paper IPTC 10994 Presented at the 2005 International Technology Conference, pp.21-23, 2005.

R. R. Huilgol and Z. You, Application of the augmented lagrangian method to steady pipe flows of bingham, casson and herschel-bulkley fluids, Journal of non-newtonian fluid mechanics, vol.128, issue.2-3, pp.126-143, 2005.

M. Iijima, M. Shinozaki, T. Hatakeyama, M. Takahashi, and H. Hatakeyama, AFM studies on gelation mechanism of xanthan gum hydrogels, Carbohydr. Polym, vol.68, pp.701-707, 2007.

S. Jana, B. Kapoor, and A. Acrivos, Apparent wall-slip velocity coefficients in concentrated suspensions of noncolloidal particles, J. Rheol, vol.39, pp.1123-1132, 1995.

P. Jay, A. Magnin, and J. M. Piau, Numerical simulation of viscoplastic fluid flows through an axisymmetric contraction, Journal of fluids engineering, vol.124, issue.3, pp.700-705, 2002.

H. Jasak, Error Analysis and Estimation for the Finite Volume Method with Applications to Fluid Flows, 1996.

T. Q. Jiang, A. C. Young, and A. B. Metzner, The rheological characterization of HPG gels: measurement of slip velocities in capillary tubes, Rheol. Acta, vol.25, p.397, 1986.

D. M. Jones and K. Walters, The behavior of polymer solutions in extension-dominated flows with applications to enhanced oil recovery, Rheol. Acta, vol.28, pp.482-498, 1989.

D. S. Kalika and M. M. Denn, Wall slip and extrudate distortion in linear low-density polyethylene, J. Rheol, vol.31, p.815, 1987.

D. M. Kalyon, Apparent slip and viscoplasticity of concentrated suspensions, Journal of Rheology, vol.49, issue.3, pp.621-640, 2005.

D. M. Kalyon and H. Gevgilili, Wall slip and extrudate distortion of three polymer melts, J. Rheol, vol.47, p.683, 2003.

G. Kefayati and R. Huilgol, Lattice boltzmann method for the simulation of the steady flow of a bingham fluid in a pipe of square cross-section, European Journal of Mechanics-B/Fluids, vol.65, p.203, 2017.

J. W. Kim, W. Bryant, J. Watkins, and T. Tieh, Electron microscopic observations of shale diagenesis, offshore louisiana, usa, gulf of mexico, Geo-Marine Letters, vol.18, issue.3, pp.234-240, 1998.

Z. Kountouriotis, G. C. Georgiou, and E. Mitsoulis, Numerical study of the combined effects of inertia, slip, and compressibility in extrusion of yield stress fluids, Rheologica Acta, vol.53, pp.791-804, 2014.

Z. Kountouriotis, M. Philippou, and G. C. Georgiou, Development lengths in newtonian poiseuille flows with wall slip, Applied Mathematics and Computation, vol.291, pp.98-114, 2016.

S. Kolodzie, Analysis of Pore Throat Size and Used of the Waxman-Smits Equation to determine OOIP in Spindle Field, 1980.

J. Kozeny, Ueber kapillare Leitung des Wassers im Boden, Sitzungsber Akad.Wiss, vol.136, pp.271-306, 1927.

W. Kozicki, C. Chou, and C. Tiu, Non-newtonian flow in ducts of arbitrary cross-sectional shape, Chemical Engineering Science, vol.21, issue.8, pp.665-679, 1966.

W. Kozicki, C. J. Hsu, and C. Tiu, Non-Newtonian ow through packed beds and porous media, Chemical Engineering Science, vol.22, issue.4, pp.487-502, 1967.

A. Lachke, Xanthan-a versatile gum, Resonance, vol.9, issue.10, 2004.

J. Lai, G. Wang, Y. Chai, Y. Ran, and X. Zhang, Depositional and diagenetic controls on pore structure of tight gas sandstone reservoirs: Evidence from lower cretaceous b ashijiqike formation in k elasu thrust belts, k uqa depression in t arim b asin of west c hina, Resource Geology, vol.65, issue.2, pp.55-75, 2015.

J. Lai, G. Wang, S. Wang, J. Cao, M. Li et al., Review of diagenetic facies in tight sandstones: Diagenesis, diagenetic minerals, and prediction via well logs, Earth-Science Reviews, vol.185, pp.234-258, 2018.

R. Langsch, J. Zalucky, S. Haase, and R. Lange, Investigation of a packed bed in a mini channel with a low channel-to-particle diameter ratio: flow regimes and mass transfer in gas-liquid operation, Chemical Engineering and Processing: Process Intensification, vol.75, pp.8-18, 2014.

F. Larachi, R. Hannaoui, P. Horgue, F. Augier, Y. Haroun et al., X-ray micro-tomography and pore network modeling of single-phase fixedbed reactors, Chemical Engineering Journal, vol.240, pp.290-306, 2014.

C. Lassen, B. H. Andersen, J. Maag, and P. Maxson, Options for reducing mercury use in products and applications, and the fate of mercury already circulating in society, European Commission, Directorate-General Environment, 2008.

H. C. Lau and W. R. Schowalter, A model of adhesive failure of viscoelastic fluids during flow, J. Rheol, vol.30, p.193, 1996.

M. F. Letelier and D. A. Siginer, On the flow of a class of viscoinelastic-viscoplastic fluids in tubes of non-circular contour, International Journal of Engineering Science, vol.45, issue.11, pp.873-881, 2007.

M. F. Letelier, D. A. Siginer, and C. B. Hinojosa, On the physics of viscoplastic fluid flow in noncircular tubes, International Journal of Non-Linear Mechanics, vol.88, pp.1-10, 2017.

P. Li, M. Zheng, H. Bi, S. Wu, and X. Wang, Pore throat structure and fractal characteristics of tight oil sandstone: a case study in the ordos basin, china. Journal of Petroleum Science and Engineering, vol.149, pp.665-674, 2017.

X. Li and L. Zhang, Characterization of dual-structure pore-size distribution of soil, Canadian geotechnical journal, vol.46, issue.2, pp.129-141, 2009.

Z. Li, S. Wu, D. Xia, S. He, and X. Zhang, An investigation into pore structure and petrophysical property in tight sandstones: A case of the yanchang formation in the southern ordos basin, china. Marine and Petroleum Geology, vol.97, pp.390-406, 2018.

S. Liu and J. H. Masliyah, On non-newtonian fluid flow in ducts and porous media, Chemical Engineering Science, vol.53, issue.6, pp.1175-1201, 1998.

X. Liu, J. Wang, L. Ge, F. Hu, C. Li et al., Pore-scale characterization of tight sandstone in yanchang formation ordos basin china using micro-ct and sem imaging from nm-to cm-scale, Fuel, vol.209, pp.254-264, 2017.

A. Lønøy, J. Akselsen, and K. Rønning, Diagenesis of a deeply buried sandstone reservoir: Hild field, northern North Sea, Clay Minerals, vol.21, issue.4, pp.497-511, 1986.

T. K. Lowenstein and R. J. Spencer, Syndepositional origin of potash evaporites: petrographic and fluid inclusion evidence, Am. J. Sci, vol.290, pp.1-42, 1990.

S. Luk, R. Mutharasan, and D. Apelian, Experimental observations of wall slip: tube and packed bed ow, Industrial & Engineering Chemistry Research, vol.26, issue.8, pp.1609-1616, 1987.

A. Maciel, V. Salas, J. F. Soltero, J. Guzman, and O. Manero, On the wall slip of polymer blends, Journal of Polymer Science Part B, vol.40, issue.4, pp.303-316, 2002.

G. Malvault, A. Ahmadi, and A. Omari, Numerical simulation of yield stress fluid flow in capillary bundles: influence of the form and the axial variation in the cross section, Transport in porous media, vol.120, pp.255-270, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01650916

F. H. Marchesini, A. A. Alicke, P. R. De-souza-mendes, and C. M. Zíglio, Rheological characterization of waxy crude oils: Sample preparation, Energy Fuels, vol.26, pp.2566-2577, 2012.

F. H. Marchesini, M. F. Naccache, A. Abdu, A. A. Alicke, and P. R. De-souza-mendes, Rheological characterization of yield-stress materials: Flow pattern and apparent wall slip, Applied Rheology, vol.25, issue.5, pp.32-41, 2015.

A. Marly and P. Vigneaux, Augmented lagrangian simulations study of yield-stress fluid flows in expansion-contraction and comparisons with physical experiments, Journal of Non-Newtonian Fluid Mechanics, vol.239, pp.35-52, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01432028

R. J. Marshall and A. B. Metzner, Flow of viscoelastic uids through porous media, Industrial & Engineering Chemistry Fundamentals, vol.6, issue.3, pp.393-400, 1967.

. Meeker,

S. P. Bonnecaze, R. T. Cloitre, and M. , Slip and ow in pastes of soft particles: Direct observation and rheology, Journal of Rheology, vol.48, issue.6, pp.1295-1320, 2004.

P. R. Mendes and E. S. Dutra, Viscosity function for yield-stress liquids, Applied Rheology, vol.14, issue.6, pp.296-302, 2004.

E. Mitsoulis, Flows of viscoplastic materials: models and computations, Rheology reviews, pp.135-178, 2007.

E. Mitsoulis, S. Abdali, and N. Markatos, Flow simulation of herschel-bulkley fluids through extrusion dies, The Canadian Journal of Chemical Engineering, vol.71, issue.1, pp.147-160, 1993.

E. Mitsoulis and R. Huilgol, Entry flows of bingham plastics in expansions, Journal of nonnewtonian fluid mechanics, vol.122, issue.1-3, pp.45-54, 2004.

P. C. Moller, A. Fall, and D. Bonn, No steady state flows below the yield stress, 2009.

A. Mongruel and M. Cloitre, Axisymmetric orifice flow for measuring the elongational viscosity of semi-rigid polymer solutions, J. Non Newton Fluid Mech, vol.110, pp.27-43, 2003.

M. Mooney, Explicit formulas for slip and fluidity, J. Rheol, vol.2, pp.210-222, 1931.

P. P. Mosolov and V. P. Miasnikov, Variational methods in the theory of viscousplastic medium, J. Mech. Appl. Math, vol.29, pp.468-492, 1965.

P. P. Mosolov and V. P. Miasnikov, On stagnant flow regions of a viscous-plastic medium in pipes, J. Mech. Appl. Math, vol.30, pp.705-719, 1966.

P. P. Mosolov and V. P. Miasnikov, On qualitative singularities of the flow of a viscous-plastic medium in pipes, J. Mech. Appl. Math, vol.31, pp.581-585, 1967.

G. E. Mueller, Radial porosity in packed beds of spheres, Powder Technology, vol.203, issue.3, pp.626-633

B. P. Muljadi, M. J. Blunt, A. Q. Raeini, and B. Bijeljic, The impact of porous media heterogeneity on nondarcy flow behaviour from pore-scale simulation, Advances in Water Resources, vol.95, pp.329-340, 2016.

B. S. Nabawy, Estimating porosity and permeability using digital image analysis (dia) technique for highly porous sandstones, Arabian Journal of Geosciences, vol.7, issue.3, pp.889-898, 2014.

M. R. Najm and N. M. Atallah, Non-newtonian fluids in action: Revisiting hydraulic conductivity and pore size distribution of porous media, Vadose Zone Journal, vol.15, issue.9, 2016.

C. Neto, D. R. Evans, E. Bonaccurso, H. J. Butt, and V. S. Craig, Boundary slip in Newtonian liquids: a review of experimental studies, Rep. Prog. Phys, vol.68, pp.2859-2897, 2005.

Q. Nguyen and D. Boger, Direct yield stress measurement with the vane method, J. Rheol, vol.29, issue.3, pp.335-347, 1983.

Q. D. Nguyen and D. V. Boger, Measuring the Flow Properties of Yield Stress Fluids, Annual Review of Fluid Mechanics, vol.24, pp.47-88, 1992.

G. Nolan and P. Kavanagh, The size distribution of interstices in random packings of spheres, Powder technology, vol.78, issue.3, pp.231-238, 1994.

E. J. O&apos;donovan and R. I. Tanner, Numerical study of the Bingham squeeze film problem, J. Non-Newtonian Fluid Mech, vol.15, pp.75-83, 1984.

A. Omari, M. Moan, and G. Chauveteau, Hydrodynamic behavior of semirigid polymer at a solidliquid interface, Journal of Rheology, vol.33, issue.1, pp.1-13, 1989.

A. Oukhlef, A. Ambari, S. Champmartin, and A. Despeyroux, «Yield stress fluid method to mesure the pore size distribution of a porous medium, » chez Proceedings of ASME 2010, p.3

. Joint-us-european, Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, 2010.

G. Ovarlez, S. Cohen-addad, K. Krishan, J. Goyon, and P. Coussot, On the existence of a simple yield stress fluid behavior, Journal of Non-Newtonian Fluid Mechanics, vol.193, pp.68-79, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00716376

P. Panaseti and G. C. Georgiou, Viscoplastic flow development in a channel with slip along one wall, Journal of Non-Newtonian Fluid Mechanics, vol.248, pp.8-22, 2017.

T. C. Papanastasiou, Flows of materials with yield, Journal of Rheology, vol.31, issue.5, pp.385-404, 1987.

S. V. Patankar, Series in computational methods in mechanics and thermal sciences, 1980.

T. Patzek and D. Silin, Shape factor and hydraulic conductance in noncircular capillaries: I. onephase creeping flow, Journal of colloid and interface science, vol.236, issue.2, pp.295-304, 2001.

J. Pérez-gonzález, J. J. López-durán, B. M. Marín-santibáñez, and F. Rodriguez-gonzález, Rheo-PIV of a yield-stress fluid in a capillary with slip at the wall, Rheol. Acta, vol.51, p.937, 2012.

C. L. Perrin, P. M. Tardy, K. S. Sorbie, and J. C. Crawshaw, Experimental and modeling study of newtonian and non-newtonian fluid flow in pore network micromodels, Journal of Colloid and Interface Science, vol.295, issue.2, pp.542-550, 2006.

T. Pham and E. Mitsoulis, Entry and exit flows of casson fluids, The Canadian Journal of Chemical Engineering, vol.72, issue.6, pp.1080-1084, 1994.

J. M. Piau, Carbopol gels: elastoviscoplastic and slippery glasses made of individual swollen sponges: meso-and macroscopic properties, constitutive equations and scaling laws, J. Non-Newtonian Fluid Mech, vol.144, p.207, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00352873

L. Pistocchini, S. Garone, and M. Motta, Porosity and pressure drop in packed beds of spheres between narrow parallel walls, Chemical Engineering Journal, vol.284, pp.802-811, 2016.

J. Poiseuille, Recherches expérimentales sur le mouvement des liquides dans les tubes de très petits diamètres

, Comptes rendus hebdomadaires des séances de l'Académie des sciences 11, pp.1041-1048, 1840.

W. R. Purcell, «Capillary pressure -Their measurement using mercury and the calculation of Références bibliographiques, 120 permeability therefrom, J. Petr. Tech, vol.1, pp.39-48, 1949.

A. Putz, I. Frigaard, and D. Martinez, On the lubrication paradox and the use of regularisation methods for lubrication flows, Journal of Non-Newtonian fluid mechanics, vol.163, issue.1-3, pp.62-77

A. V. Ramamurthy, Wall slip in viscous fluids and influence of materials of construction, J. Rheol, vol.30, p.337, 1986.

F. Rene, J. C. Leuliet, and M. Lalande, Heat transfer to Newtonian and non Newtonian food fuids in plate heat exchangers: Experimental and numerical approaches, ¹rans. Inst. Chem. Engng 69 Part C), pp.115-126, 1991.

R. E. Robertson and H. A. Stiff, «An improved mathematical model for relating shear stress to shear rate in drilling fluids and cement slurries, » Soc. Petrol. Eng. J, pp.31-36, 1976.

A. Rodriguez-de-castro, Extending darcy's law to the flow of yield stress fluids in packed beds: Method and experiments, Advances in Water Resources, vol.126, pp.55-64, 2019.

A. Rodriguez-de-castro, A. Ahmadi-sénichault, and A. Omari, Using xanthan gum solutions to characterize porous media with the yield stress fluid porosimetry method: Robustness of the method and effects of polymer concentration, Transport in Porous Media, vol.122, issue.2, pp.357-374

A. Rodriguez-de-castro, A. Omari, A. Ahmadi-sénichault, and D. Bruneau, Toward a new method of porosimetry: principles and experiments, Transport in porous media, vol.101, issue.3, pp.349-364, 2014.

A. Rodriguez-de-castro, A. Omari, A. Ahmadi-sénichault, S. Savin, and L. F. Madariaga, Characterizing porous media with the yield stress fluids porosimetry method, Transport in Porous Media, vol.114, issue.1, pp.213-233, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01697385

S. Rodts, Etude du passage micro-macro pour le transport par diffusion en milieu poreux Application aux expériences de RMN-GCP, Thèse de doctorat de l'école Nationale Des Ponts et Chaussées, 2001.

J. Rouquerol, D. Avnir, C. W. Fairbridge, D. H. Everett, J. H. Haynes et al., Recommendations for the characterization of porous solids, Pure & Appl. Chem, vol.66, issue.8, pp.1739-1758, 1994.

M. Reiner, . Deformation, . Strain, H. K. Flows, and . Lewis, , 1960.

. P. Roache, Quantification of uncertainty in computational fluid dynamics, Annual review of fluid Mechanics, vol.29, issue.1, pp.123-160, 1997.

G. P. Roberts and H. A. Barnes, New measurements of the flowcurves for carbopol dispersions without slip artefacts, Rheol. Acta, vol.40, pp.499-503, 2001.

G. P. Roberts, H. A. Barnes, and P. Carew, Modelling the ow behaviour of very shear -thinning liquids, Chemical Engineering Science, vol.56, issue.19, pp.5617-5623, 2001.

N. Roquet and P. Saramito, An adaptive finite element method for viscoplastic flows in a square pipe with stick-slip at the wall, Journal of Non-Newtonian Fluid Mechanics, vol.155, issue.3, pp.101-115
URL : https://hal.archives-ouvertes.fr/hal-00133116

A. Roustaei, T. Chevalier, L. Talon, and I. Frigaard, Non-darcy effects in fracture flows of a yield stress fluid, Journal of Fluid Mechanics, vol.805, pp.222-261, 2016.

A. Roustaei and I. Frigaard, The occurrence of fouling layers in the flow of a yield stress fluid along a wavy-walled channel, Journal of Non-Newtonian fluid mechanics, vol.198, pp.109-124, 2013.

M. C. Sanchez, C. Valenci, J. M. Franco, and C. Gallegos, Wall Slip Phenomena in Oil-in-Water Emulsions: E_ect of Some Structural Parameters, Journal of Colloid and Interface Science, vol.241, issue.1, pp.226-232, 2001.

P. Saramito and N. Roquet, An adaptive finite element method for viscoplastic fluid flows in pipes, Computer methods in applied mechanics and engineering, vol.190, pp.5391-5412, 2001.

A. E. Scheidegger, The physics of flow through porous media, 3e éd, 1974.

M. Schmitt, M. Halisch, C. Müller, and C. P. Fernandes, Classification and quantification of pore shapes in sandstone reservoir rocks with 3-d x-ray micro-computed tomography, Solid Earth, vol.7, issue.1, pp.285-300, 2016.

P. Scott, F. Mirza, and J. Vlachopoulos, A finite element analysis of laminar flows through planar and axisymmetric abrupt expansions, Computers & fluids, vol.14, issue.4, pp.423-432, 1986.

F. Schüth, K. S. Sing, and J. Weitkamp, Handbook of Porous Solids, 2002.

S. Shahsavari and G. H. Mckinley, Mobility and pore-scale fluid dynamics of rate-dependent yield-stressn fluids flowing through fibrous porous media, Journal of Non-Newtonian Fluid Mechanics, vol.235, pp.76-82, 2016.

A. V. Shenoy, Non-Newtonian Fluid Heat transfer in porous media, Adv. Heat Trans-fer, vol.24, pp.70233-70241, 1994.

A. Sheppard, S. Latham, J. Middleton, A. Kingston, G. Myers et al., Techniques in helical scanning, dynamic imaging and image segmentation for improved quantitative analysis with x-ray micro-ct

, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol.324, pp.49-56, 2014.

A. H. Skelland, Non-Newtonian Flow and Heat Transfer, 1967.

T. Sochi, Modelling the flow of yield-stress fluids in porous media, Transport in Porous Media, vol.85, issue.2, pp.489-503, 2010.

T. Sochi, Non-newtonian flow in porous media, Polymer, vol.51, issue.22, pp.5007-5023, 2010.

T. Sochi, Slip at fluid-solid interface, Polymer Reviews, vol.51, issue.4, pp.309-340, 2011.

T. Sochi and M. J. Blunt, Pore-scale network modeling of ellis and herschel-bulkley fluids, Journal of Petroleum Science and Engineering, vol.60, issue.2, pp.105-124, 2008.

F. Soltani and U. Yilmazer, Slip velocity and slip layer thickness in flow of concentrated suspensions, J.Appl. Polym. Sci, vol.70, pp.515-522, 1998.

K. Song, Y. Kim, and G. S. Chang, Rheology of concentrated xanthan gum solutions: steady shear flow behavior, Fibers Polym, vol.7, issue.2, pp.129-138, 2006.

K. S. Sorbie, Polymer-Improved Oil Recovery, Blackie and Son Ltd, 1991.

K. S. Sorbie, Rheological and transport effects in the flow of low-concentration xanthan solution through porous media, J. Colloid lnterface Sci, vol.145, pp.74-89, 1991.

K. Sorbie and Y. Huang, Rheological and transport effects in the flow of low-concentration xanthan solution through porous media, J. Colloid Interface Sci, vol.145, issue.1, pp.74-89, 1991.

. K. Sorbie, Depleted layer effects in polymer ow through porous media: I. Single capillary calculations, Journal of Colloid and Interface Science, vol.139, issue.2, pp.299-314, 1990.

H. P. Soto, M. L. Martins-costa, C. Fonseca, and S. Frey, A numerical investigation of inertia flows of bingham-papanastasiou fluids by an extra stress-pressure-velocity galerkin leastsquares method, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.32, issue.SPE, pp.450-460, 2010.

H. Spikes and S. Granick, Equation for slip of simple liquids at smooth solid surfaces, Langmuir, vol.19, p.5065, 2003.

J. F. Steffe, Rheological Methods in Food Process Engineering, 1996.

G. Stegemeier, Improved oil recovery by surfactant and polymer flooding, vol.I, 1977.

J. R. Stokes and J. H. Telford, Measuring the yield behavior of structured fluids, J. Non-Newt. Fluid Mech, vol.124, pp.137-146, 2004.

L. Talon and D. Bauer, On the determination of a generalized darcy equation for yield-stress fluid in porous media using a lattice-boltzmann trt scheme, The European Physical Journal E, vol.36, issue.12, p.139, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00948893

G. Tang, S. Wang, P. Ye, and W. Tao, Bingham fluid simulation with the incompressible lattice boltzmann model, Journal of Non-Newtonian Fluid Mechanics, vol.166, issue.1-2, pp.145-151, 2011.

A. J. Taylor and S. D. Wilson, Conduit flow of an incompressible, yield-stress fluid, Journal of Rheology, vol.41, issue.1, pp.93-102, 1997.

T. Torskaya, S. Shabro, C. Torres-verdin, . Salazar-tio, and A. Revil, Grain Shape Effects on Permeability, Formation Factor, and Capillary Pressure from Pore-Scale Modelling, Transp Porous Med, vol.102, pp.71-90, 2014.

D. C. Tretheway and C. D. Meinhart, Apparent uid slip at hydrophobic microchannel walls, Physics of Fluids, vol.14, issue.3, pp.9-12, 2002.

D. C. Tretheway and C. D. Meinhart, A generating mechanism for apparent uid slip in hydrophobic microchannels, Physics of Fluids, vol.16, issue.5, pp.1509-1515, 2004.

P. Uhlherr, J. Guo, C. Tiu, X. M. Zhang, J. Zhou et al., The shear-induced solid-liquid transition in yield stress materials with chemically different structures, J. Non-Newt. FluidMech, vol.125, pp.101-119, 2005.

, United Nations Environment Programme (UNEP), Minamata convention on mercury, 2013.

M. A. Valdez, L. Yeomans, F. Montes, H. Acuña, and A. Ayala, Influence of temperature on the slip velocity of semidilute xanthan gum solutions, Rheologica acta, vol.34, issue.5, pp.474-482, 1995.

V. Vand, Viscosity of solutions and suspensions. I. Theory, J. Phys. Colloid Chem, vol.52, pp.277-314, 1948.

J. H. Van-der-linden, A. Sufian, G. A. Narsilio, A. R. Russell, and A. Tordesillas, A computational geometry approach to pore network construction for granular packings, Computers & geosciences, vol.112, pp.133-143, 2018.

H. J. Vogel and K. Roth, Quantitative morphology and network representation of soil pore structure, Advances in water resources, vol.24, issue.3-4, pp.233-242, 2001.

W. Wang, Y. Jiang, R. Swennen, J. Yuan, J. Liu et al., Pore-throat characteristics of tight sandstonereservoirs composed of gravity flow sediments: Yingcheng formation, longfengshan sag, china.Journal of Petroleum Science and Engineering, vol.171, pp.646-661, 2018.

D. Xiao, S. Jiang, D. Thul, W. Huang, Z. Lu et al., Combining rate-controlled porosimetry and nmr to probe full-range pore throat structures and their evolution features in tight sands: A case study in the songliao basin, china. Marine and Petroleum Geology, vol.83, pp.111-123, 2017.

D. Xiao, S. Jiang, D. Thul, S. Lu, L. Zhang et al., Impacts of clay on pore structure, storage and percolation of tight sandstones from the songliao basin, china: Implications for genetic classification of tight sandstone reservoirs, Fuel, vol.211, pp.390-404, 2018.

Q. Xiong, T. G. Baychev, and A. P. Jivkov, Review of pore network modelling of porous media: experimental characterisations, network constructions and applications to reactive transport, Journal of contaminant hydrology, vol.192, pp.101-117, 2016.

R. Yang, R. Zou, A. Yu, and S. Choi, Pore structure of the packing of fine particles, Journal of colloid and interface science, vol.299, issue.2, pp.719-725, 2006.

U. Yilmazer and D. M. Kalyon, Slip effects in capillary and parallel disk torsional flows of highly filled suspensions, J. Rheol, vol.33, p.1197, 1989.

A. Yoshimura and . Prud&apos;homme-r, Wall slip corrections for couette and parallel disk viscometers, J. Rheol, vol.32, pp.53-67, 1988.

A. Yoshimura and . Prud&apos;homme-r, Wall slip effects on dynamic oscillatory measurements, J. Rheol, vol.32, pp.575-584, 1988.

F. Zami-pierre, R. De-loubens, M. Quintard, and Y. Davit, Polymer flow through porous media: numerical prediction of the contribution of slip to the apparent viscosity, Transport in Porous Media, vol.119, issue.3, pp.521-538, 2017.

L. Zhang, S. Lu, D. Xiao, and B. Li, Pore structure characteristics of tight sandstones in the northern songliao basin, china. Marine and Petroleum Geology, vol.88, pp.170-180, 2017.

W. Zhang, K. E. Thompson, A. H. Reed, and L. Beenken, Relationship between packing structure and porosity in fixed beds of equilateral cylindrical particles, vol.61, pp.8060-8074, 2006.

F. Zhu, W. Hu, J. Cao, F. Sun, Y. Liu et al., Micro/nanoscale pore structure and fractal characteristics of tight gas sandstone: A case study from the yuanba area, northeast sichuan basin, china. Marine and Petroleum Geology, vol.98, pp.116-132, 2018.

H. Zhu, Y. Kim, and D. De-kee, Non-newtonian fluids with a yield stress, Journal of Non-Newtonian Fluid Mechanics, vol.129, issue.3, pp.177-181, 2005.

, Influence du maillage pour une section droite rectangulaire (? = 1/10), Tableau, vol.35