W. Z. Abuzaid, M. D. Sangid, J. D. Carroll, H. Sehitoglu, and J. Lambros, Slip transfer and plastic strain accumulation across grain boundaries in Hastelloy X, Journal of the Mechanics and Physics of Solids, vol.60, issue.6, pp.1201-1220, 2012.

N. Akkari, A. Hamdouni, E. Liberge, and M. Jazar, On the sensitivity of the POD technique for a parameterized quasi-nonlinear parabolic equation, Advanced Modeling and Simulation in Engineering Sciences, vol.1, issue.1, p.14, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01939676

B. Almroth, P. Stehling, and F. Brogan, Global function approach in structural analysis: Basic approach, 1981.

B. Almroth, P. Stern, and F. A. Brogan, Automatic choice of global shape functions in structural analysis, Aiaa Journal, vol.16, issue.5, pp.525-528, 1978.

B. O. Almroth, P. Stern, and F. A. Brogan, Automatic choice of global shape functions in structural analysis, AIAA Journal, vol.16, issue.5, pp.525-528, 1978.

A. Arcari, R. D. Vita, and N. E. Dowling, Mean stress relaxation during cyclic straining of high strength aluminum alloys, International Journal of Fatigue, vol.31, issue.11, pp.1742-1750, 2009.

A. Arsenlis and D. Parks, Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density, Acta materialia, vol.47, issue.5, pp.1597-1611, 1999.

A. Arsenlis, D. M. Parks, R. Becker, and V. V. Bulatov, On the evolution of crystallographic dislocation density in non-homogeneously deforming crystals, Journal of the Mechanics and Physics of Solids, vol.52, issue.6, pp.1213-1246, 2004.

R. Asaro and J. Rice, Strain localization in ductile single crystals, Journal of the Mechanics and Physics of Solids, vol.25, issue.5, pp.309-338, 1977.

N. Aubry, P. Holmes, J. L. Lumley, and E. Stone, The dynamics of coherent structures in the wall region of a turbulent boundary layer, Journal of Fluid Mechanics, vol.192, pp.115-173, 1988.

F. Azzouz, G. Cailletaud, J. L. Chaboche, E. Ostoja-kuczynski, and S. Quilici, Cyclic calculations and life estimation in thermomechanical fatigue, 9th International conference on multiaxial fatigue and fracture, pp.785-793, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00905549

J. Baiges, R. Codina, and S. Idelsohn, A domain decomposition strategy for reduced order models. application to the incompressible Navier-Stokes equations, Computer Methods in Applied Mechanics and Engineering, vol.267, pp.23-42, 2013.

F. Barbe, S. Forest, and G. Cailletaud, Intergranular and intragranular behavior of polycrystalline aggregates. Part 2: Results, International Journal of Plasticity, vol.17, issue.4, pp.537-563, 2001.
URL : https://hal.archives-ouvertes.fr/hal-02327393

M. Barrault, Y. Maday, N. C. Nguyen, and A. T. Patera, An 'empirical interpolation' method: application to efficient reduced-basis discretization of partial differential equations, Comptes Rendus Mathematique, vol.339, issue.9, pp.667-672, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00021702

R. Becker, J. Butler, H. Hu, and L. Lalli, Analysis of an aluminum single crystal with unstable initial orientation (001)[110] in channel die compression, Metallurgical Transactions A, vol.22, issue.1, pp.45-58, 1991.

V. Bennett and D. Mcdowell, Polycrystal orientation distribution effects on microslip in high cycle fatigue, International Journal of Fatigue, vol.25, issue.1, pp.27-39, 2003.

J. Besson, G. Cailletaud, J. Chaboche, and S. Forest, Non-linear mechanics of materials, vol.167, 2009.

T. Bieler, P. Eisenlohr, F. Roters, D. Kumar, D. Mason et al., The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals, International Journal of Plasticity, vol.25, issue.9, pp.1655-1683, 2009.

M. Brand, Incremental singular value decomposition of uncertain data with missing values, European Conference on Computer Vision, pp.707-720, 2002.

V. Buljak, Proper Orthogonal Decomposition and Radial Basis Functions for Fast Simulations, pp.85-139, 2012.

J. W. Bull, Numerical analysis and modelling of composite materials, 2012.

E. P. Busso and G. Cailletaud, On the selection of active slip systems in crystal plasticity, International Journal of Plasticity, vol.21, issue.11, pp.2212-2231, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00154559

G. Cailletaud, Single crystal modeling for structural calculations: Part 2 -finite element implementation, Journal of Engineering Materials and Technology, vol.113, issue.1, pp.171-182, 1991.

G. M. Castelluccio, W. D. Musinski, and D. L. Mcdowell, Computational micromechanics of fatigue of microstructures in the hcf-vhcf regimes, gigacycle Fatigue-Theory and Applications Dedicated to the Memory of Professor Claude Bathias, vol.93, pp.387-396, 2016.

J. Chaboche, Time-independent constitutive theories for cyclic plasticity, International Journal of Plasticity, vol.2, issue.2, pp.149-188, 1986.

J. Chaboche, Constitutive equations for cyclic plasticity and cyclic viscoplasticity, International Journal of Plasticity, vol.5, issue.3, pp.247-302, 1989.

J. Chaboche, P. Kanouté, and F. Azzouz, Cyclic inelastic constitutive equations and their impact on the fatigue life predictions, International Journal of Plasticity, vol.35, pp.44-66, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00714264

S. Chaturantabut and D. Sorensen, Nonlinear model reduction via Discrete Empirical Interpolation, SIAM Journal on Scientific Computing, vol.32, issue.5, pp.2737-2764, 2010.

Y. Choi, M. Groeber, T. Turner, D. Dimiduk, C. Woodward et al., A crystal-plasticity FEM study on effects of simplified grain representation and mesh types on mesoscopic plasticity heterogeneities, Materials Science and Engineering: A, vol.553, pp.37-44, 2012.

H. Christ, C. Wamukwamba, and H. Mughrabi, The effect of mean stress on the high-temperature fatigue behaviour of SAE 1045 steel, Materials Science and Engineering, pp.382-385, 1997.

W. Clark, R. Wagoner, Z. Shen, T. Lee, I. Robertson et al., On the criteria for slip transmission across interfaces in polycrystals, Scripta Metallurgica et Materialia, vol.26, issue.2, pp.203-206, 1992.

D. Colas, E. Finot, S. Flouriot, S. Forest, M. Mazière et al., Local ratcheting phenomena in the cyclic behavior of polycrystalline tantalum, JOM, vol.71, issue.8, pp.2586-2599, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02266594

A. Cruzado, J. Llorca, and J. Segurado, Modeling cyclic deformation of Inconel 718 superalloy by means of crystal plasticity and computational homogenization, International Journal of Solids and Structures, vol.122, issue.123, pp.148-161, 2017.

A. Cruzado, M. Urchegui, and X. Gómez, Finite element modeling and experimental validation of fretting wear scars in thin steel wires, Wear, vol.289, pp.26-38, 2012.

D. Das and P. Chakraborti, Effect of stress parameters on ratcheting deformation stages of polycrystalline OFHC copper, Fatigue & Fracture of Engineering Materials & Structures, vol.34, issue.9, pp.734-742, 2011.

F. Di-gioacchino and J. Quinta-da-fonseca, Plastic strain mapping with sub-micron resolution using digital image correlation, Experimental Mechanics, vol.53, issue.5, pp.743-754, 2013.

R. Dingreville, C. C. Battaile, L. N. Brewer, E. A. Holm, and B. L. Boyce, The effect of microstructural representation on simulations of microplastic ratcheting, International Journal of Plasticity, vol.26, issue.5, pp.617-633, 2010.

F. Dunne, D. Rugg, and A. Walker, Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: application to cold-dwell fatigue in ti alloys, International Journal of Plasticity, vol.23, issue.6, pp.1061-1083, 2007.

F. Dunne, A. Wilkinson, and R. Allen, Experimental and computational studies of low cycle fatigue crack nucleation in a polycrystal, International Journal of Plasticity, vol.23, issue.2, pp.273-295, 2007.

J. Edmonds, Matroids and the greedy algorithm, Mathematical programming, vol.1, issue.1, pp.127-136, 1971.

R. Everson and L. Sirovich, Karhunen-loeve procedure for gappy data, JOSA A, vol.12, issue.8, pp.1657-1664, 1995.

B. Flipon, C. Keller, R. Quey, and F. Barbe, A full-field crystal-plasticity analysis of bimodal polycrystals, International Journal of Solids and Structures, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02184404

S. Forest and M. Rubin, A rate-independent crystal plasticity model with a smooth elastic-plastic transition and no slip indeterminacy, European Journal of Mechanics -A/Solids, vol.55, pp.278-288, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01251477

D. Fournier and A. Pineau, Low cycle fatigue behavior of Inconel 718 at 298 K and 823 K, Metallurgical Transactions A, vol.8, issue.7, pp.1095-1105, 1977.

C. Frederick and P. Armstrong, A mathematical representation of the multiaxial Bauschinger effect, Materials at High Temperatures, vol.24, issue.1, pp.1-26, 2007.

F. Fritzen and M. Hassani, Space-time model order reduction for nonlinear viscoelastic systems subjected to long-term loading, Meccanica, vol.53, issue.6, pp.1333-1355, 2018.

C. Gérard, G. Cailletaud, and B. Bacroix, Modeling of latent hardening produced by complex loading paths in FCC alloys, International Journal of Plasticity, vol.42, pp.194-212, 2013.

S. Ghorbanpour, M. Zecevic, A. Kumar, M. Jahedi, J. Bicknell et al., A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718, International Journal of Plasticity, vol.99, pp.162-185, 2017.

C. Goh, D. Mcdowell, and R. Neu, Plasticity in polycrystalline fretting fatigue contacts, Journal of the Mechanics and Physics of Solids, vol.54, issue.2, pp.340-367, 2006.

C. Goh, J. Wallace, R. Neu, and D. Mcdowell, Polycrystal plasticity simulations of fretting fatigue, International Journal of Fatigue, vol.23, pp.423-435, 2001.

A. Goodman, Development of constitutive equations for computer analysis of stainless steel components, Nuclear engineering and design, vol.83, issue.3, pp.349-354, 1984.

S. Gribbin, J. Bicknell, L. Jorgensen, I. Tsukrov, and M. Knezevic, Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718, International Journal of Fatigue, vol.93, pp.156-167, 2016.

T. Gu, J. Medy, V. Klosek, O. Castelnau, S. Forest et al., Multiscale modeling of the elasto-plastic behavior of architectured and nanostructured Cu-Nb composite wires and comparison with neutron diffraction experiments, International Journal of Plasticity, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02266595

Y. Guilhem, S. Basseville, F. Curtit, J. Stéphan, and G. Cailletaud, Numerical analysis of the effect of surface roughness on mechanical fields in polycrystalline aggregates, Modelling and Simulation in Materials Science and Engineering, vol.26, issue.4, p.45004, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01719022

H. Hao, D. Ye, Y. Chen, M. Feng, and J. Liu, A study on the mean stress relaxation behavior of 2124-T851 aluminum alloy during low-cycle fatigue at different strain ratios, Materials & Design, vol.67, pp.272-279, 2015.

S. Harren, H. Deve, and R. Asaro, Shear band formation in plane strain compression, Acta Metallurgica, vol.36, issue.9, pp.2435-2480, 1988.

T. Hassan and S. Kyriakides, Ratcheting of cyclically hardening and softening materials: I. Uniaxial behavior, International Journal of Plasticity, vol.10, issue.2, pp.149-184, 1994.

T. Hassan and S. Kyriakides, Ratcheting of cyclically hardening and softening materials: II. Multiaxial behavior, International Journal of Plasticity, vol.10, issue.2, pp.185-212, 1994.

C. Hennessey, G. M. Castelluccio, and D. L. Mcdowell, Sensitivity of polycrystal plasticity to slip system kinematic hardening laws for Al 7075-T6, Materials Science and Engineering: A, vol.687, pp.241-248, 2017.

J. Hernàndez, J. Oliver, A. Huespe, M. Caicedo, and J. Cante, Highperformance model reduction techniques in computational multiscale homogenization, Computer Methods in Applied Mechanics and Engineering, vol.276, pp.149-189, 2014.

Y. Jiang and H. Sehitoglu, Multiaxial cyclic ratcheting under multiple step loading, International Journal of Plasticity, vol.10, issue.8, pp.849-870, 1994.

D. S. Joseph, P. Chakraborty, and S. Ghosh, Wavelet transformation based multi-time scaling method for crystal plasticity FE simulations under cyclic loading, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.33, pp.2177-2194, 2010.

K. Karhunen and K. , Über lineare Methoden in der Wahrscheinlichkeitsrechnung, Ann. Acad. Sci. Fennicae. Ser. A. I. Math.-Phys, issue.37, pp.1-79, 1947.

A. D. Kammers and S. Daly, Digital image correlation under scanning electron microscopy: Methodology and validation, Experimental Mechanics, vol.53, issue.9, pp.1743-1761, 2013.

G. Kang, Y. Dong, H. Wang, Y. Liu, and X. Cheng, Dislocation evolution in 316L stainless steel subjected to uniaxial ratchetting deformation, Materials Science and Engineering: A, vol.527, issue.21, pp.5952-5961, 2010.

T. Kanit, S. Forest, I. Galliet, V. Mounoury, and D. Jeulin, Determination of the size of the representative volume element for random composites: statistical and numerical approach, International Journal of Solids and Structures, vol.40, issue.13, pp.3647-3679, 2003.

T. Kanit, F. Nguyen, S. Forest, D. Jeulin, M. Reed et al., Apparent and effective physical properties of heterogeneous materials: representativity of samples of two materials from food industry, Computer Methods in Applied Mechanics and Engineering, vol.195, pp.3960-3982, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00139164

K. Karhunen, Zur spektraltheorie stochastischer prozesse, Ann. Acad. Sci. Finnicae, Ser. A, vol.1, p.34, 1946.

S. Kotha, D. Ozturk, and S. Ghosh, Parametrically homogenized constitutive models (phcms) from micromechanical crystal plasticity fe simulations, part I: Sensitivity analysis and parameter identification for titanium alloys, International Journal of Plasticity, vol.120, pp.296-319, 2019.

M. Kraska, M. Doig, D. Tikhomirov, D. Raabe, and F. Roters, Virtual material testing for stamping simulations based on polycrystal plasticity, Computational Materials Science, vol.46, issue.2, pp.383-392, 2009.

S. Krishna, T. Hassan, I. B. Naceur, K. Sai, and G. Cailletaud, Macro versus micro-scale constitutive models in simulating proportional and nonproportional cyclic and ratcheting responses of stainless steel 304, International Journal of Plasticity, vol.25, issue.10, pp.1910-1949, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00424035

S. Kwofie and H. Chandler, Low cycle fatigue under tensile mean stresses where cyclic life extension occurs, International Journal of Fatigue, vol.23, issue.4, pp.341-345, 2001.

S. Lee, R. Lebensohn, and A. Rollett, Modeling the viscoplastic micromechanical response of two-phase materials using, Fast Fourier Transforms. International Journal of Plasticity, vol.27, issue.5, pp.707-727, 2011.

J. Lemaitre and J. Chaboche, Mechanics of solid materials, 1994.

L. Li, L. Shen, and G. Proust, Fatigue crack initiation life prediction for aluminium alloy 7075 using crystal plasticity finite element simulations, Mechanics of Materials, vol.81, pp.84-93, 2015.

E. Liberge and A. Hamdouni, Reduced order modelling method via proper orthogonal decomposition (POD) for flow around an oscillating cylinder, Journal of Fluids and Structures, vol.26, issue.2, pp.292-311, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00533622

C. Lim, K. Kim, and J. Seong, Ratcheting and fatigue behavior of a copper alloy under uniaxial cyclic loading with mean stress, International Journal of Fatigue, vol.31, issue.3, pp.501-507, 2009.

M. Loève, Probability Theory. The university series in higher mathematics, NJ, 1963.

A. Ma, F. Roters, and D. Raabe, On the consideration of interactions between dislocations and grain boundaries in crystal plasticity finite element modelingtheory, experiments, and simulations, Acta Materialia, vol.54, issue.8, pp.2181-2194, 2006.

Y. Maday, N. C. Nguyen, A. T. Patera, and G. S. Pau, A general, multipurpose interpolation procedure: the magic points, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00174797

Y. Maday, A. T. Patera, and G. Turinici, Global a priori convergence theory for reduced-basis approximations of single-parameter symmetric coercive elliptic partial differential equations, Comptes Rendus Mathematique, vol.335, issue.3, pp.289-294, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00798389

Y. Maday and E. M. Rønquist, A reduced-basis element method, Journal of scientific computing, vol.17, issue.1-4, pp.447-459, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00112608

C. Mary and S. Fouvry, Numerical prediction of fretting contact durability using energy wear approach: Optimisation of finite-element model, Wear, vol.263, issue.1-6, pp.444-450, 2007.

K. Matou?, M. G. Geers, V. G. Kouznetsova, and A. Gillman, A review of predictive nonlinear theories for multiscale modeling of heterogeneous materials, Journal of Computational Physics, vol.330, pp.192-220, 2017.

D. Mcdowell and F. Dunne, Microstructure-sensitive computational modeling of fatigue crack formation, International journal of fatigue, vol.32, issue.9, pp.1521-1542, 2010.

L. Méric, G. Cailletaud, and M. Gaspérini, Fe calculations of copper bicrystal specimens submitted to tension-compression tests. Acta metallurgica et materialia, vol.42, pp.921-935, 1994.

L. Méric, P. Poubanne, and G. Cailletaud, Single crystal modeling for structural calculations: part 1 -model presentation, Journal of Engineering Materials and Technology, vol.113, issue.1, pp.162-170, 1991.

J. Michel and P. Suquet, Nonuniform transformation field analysis, International Journal of Solids and Structures, vol.40, issue.25, pp.6937-6955, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00088331

T. F. Morgeneyer, J. Besson, H. Proudhon, M. J. Starink, and I. Sinclair, Experimental and numerical analysis of toughness anisotropy in AA2139 Alalloy sheet, Acta Materialia, vol.57, issue.13, pp.3902-3915, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00413654

R. Morrissey, C. Goh, and D. L. Mcdowell, Microstructure-scale modeling of hcf deformation, Mechanics of Materials, vol.35, issue.3, pp.295-311, 2003.

J. Morrow, J. Martin, and N. E. Dowling, Local stress-strain approach to cumulative fatigue damage analysis, ILLINOIS UNIV AT URBANA DEPT OF THEORETICAL AND APPLIED MECHANICS, 1974.

N. Lorenz and E. , Empirical Orthogonal Functions and Statistical Weather Prediction, 1956.

I. Nikulin, F. Yoshinaka, and T. Sawaguchi, Superior fatigue life of Fe-15Mn-10Cr-8Ni-4Si seismic damping alloy under asymmetric cyclic loading with tensile mean strain, Materials Science and Engineering: A, vol.748, pp.371-378, 2019.

A. K. Noor, On making large nonlinear problems small, Computer methods in applied mechanics and engineering, vol.34, issue.1-3, pp.955-985, 1982.

N. Ohno, M. Abdel-karim, M. Kobayashi, and T. Igari, Rattcheting characteristics of 316FR steel at high temperature, part I: Strain-controlled ratchetting experiments and simulations, International Journal of Plasticity, vol.14, issue.4, pp.355-372, 1998.

N. Ohno and J. Wang, Kinematic hardening rules with critical state of dynamic recovery, part II: application to experiments of ratcheting behavior, International Journal of Plasticity, vol.9, pp.391-403, 1993.

N. Osipov, A. Gourgues-lorenzon, B. Marini, V. Mounoury, F. Nguyen et al., FE modelling of bainitic steels using crystal plasticity, Philosophical magazine, vol.88, pp.3757-3777, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00513993

D. Ozturk, A. Shahba, and S. Ghosh, Crystal plasticity fe study of the effect of thermo-mechanical loading on fatigue crack nucleation in titanium alloys, 2016.

, Fatigue & Fracture of Engineering Materials & Structures, vol.39, issue.6, pp.752-769

S. J. Pan and Q. Yang, A survey on transfer learning, IEEE Transactions on Knowledge and Data Engineering, vol.22, issue.10, pp.1345-1359, 2010.

S. Park, K. Kim, and H. Kim, Ratcheting behaviour and mean stress considerations in uniaxial low-cycle fatigue of inconel 718 at 649°C. Fatigue & Fracture of Engineering Materials & Structures, vol.30, pp.1076-1083, 2007.

K. Pearson, LIII. on lines and planes of closest fit to systems of points in space, The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, vol.2, issue.11, pp.559-572, 1901.

D. Peirce, R. Asaro, and A. Needleman, An analysis of nonuniform and localized deformation in ductile single crystals, Acta metallurgica, vol.30, issue.6, pp.1087-1119, 1982.

J. Pelle and D. Ryckelynck, An efficient adaptive strategy to master the global quality of viscoplastic analysis, Computers & Structures, vol.78, issue.1, pp.169-183, 2000.

A. Pellissier-tanon, J. Bernard, C. Amzallag, and P. Rabbe, Evaluation of the resistance of type 316 stainless steel against progressive deformation. In: Low-Cycle Fatigue and Life Prediction, 1982.

L. Portier, S. Calloch, D. Marquis, and P. Geyer, Ratchetting under tensiontorsion loadings: experiments and modelling, International Journal of Plasticity, vol.16, issue.3, pp.303-335, 2000.

V. Prithivirajan and M. D. Sangid, The role of defects and critical pore size analysis in the fatigue response of additively manufactured IN718 via crystal plasticity, Materials & Design, vol.150, pp.139-153, 2018.

H. Proudhon, J. Li, F. Wang, A. Roos, V. Chiaruttini et al., 3d simulation of short fatigue crack propagation by finite element crystal plasticity and remeshing, International Journal of Fatigue, vol.82, pp.238-246, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01237651

C. Prud'homme, D. V. Rovas, K. Veroy, L. Machiels, Y. Maday et al., Reliable real-time solution of parametrized partial differential equations: Reduced-basis output bound methods, Journal of Fluids Engineering, vol.124, issue.1, pp.70-80, 2002.

D. Raabe, Computational Materials Science -The Simulation of Materials Microstructures and Properties, 2004.

D. Raabe, P. Klose, B. Engl, K. Imlau, F. Friedel et al., Concepts for integrating plastic anisotropy into metal forming simulations, Advanced Engineering Materials, vol.4, issue.4, pp.169-180, 2002.

C. Rao and A. Deshpande, Modelling of Engineering Materials, 2014.

J. R. Rice, Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity, Journal of the Mechanics and Physics of Solids, vol.19, issue.6, pp.433-455, 1971.

J. L. Rodgers and W. A. Nicewander, Thirteen ways to look at the correlation coefficient, The American Statistician, vol.42, issue.1, pp.59-66, 1988.

F. Roters, P. Eisenlohr, T. R. Bieler, and D. Raabe, Crystal plasticity finite element methods: in materials science and engineering, 2011.

F. Roters, P. Eisenlohr, L. Hantcherli, D. D. Tjahjanto, T. R. Bieler et al., Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications, Acta Materialia, vol.58, issue.4, pp.1152-1211, 2010.

A. Rovinelli, M. D. Sangid, H. Proudhon, and W. Ludwig, Using machine learning and a data-driven approach to identify the small fatigue crack driving force in polycrystalline materials, npj Computational Materials, vol.4, issue.1, p.35, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01869114

D. Ryckelynck, Hyper-reduction of mechanical models involving internal variables, International Journal for Numerical Methods in Engineering, vol.77, issue.1, pp.75-89, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00732247

D. Ryckelynck, D. M. Benziane, A. Musienko, and G. Cailletaud, Toward "green" mechanical simulations in materials science: hyper-reduction of a polycrystal plasticity model, European Journal of Computational Mechanics/Revue Européenne de Mécanique Numérique, vol.19, issue.4, pp.365-388, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00523243

D. Ryckelynck, F. Chinesta, E. Cueto, and A. Ammar, On the a priori model reduction: Overview and recent developments, Archives of Computational methods in Engineering, vol.13, issue.1, pp.91-128, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01633395

C. Rycroft, Voro++: a three-dimensional voronoi cell library in C++, 2009.

M. Sachtleber, Z. Zhao, and D. Raabe, Experimental investigation of plastic grain interaction, Materials Science and Engineering: A, vol.336, issue.1-2, pp.81-87, 2002.

K. Sai and G. Cailletaud, Multi-mechanism models for the description of ratchetting: Effect of the scale transition rule and of the coupling between hardening variables, International Journal of Plasticity, vol.23, issue.9, pp.1589-1617, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00158941

J. Schwartz, O. Fandeur, and C. Rey, Numerical approach of cyclic behaviour of 316LN stainless steel based on a polycrystal modelling including strain gradients, International Journal of Fatigue, vol.55, pp.202-212, 2013.

D. V. Shantsev, P. Jaysaval, S. De-la-kethulle-de-ryhove, P. R. Amestoy, A. Buttari et al., Large-scale 3-D EM modelling with a Block Low-Rank multifrontal direct solver, Geophysical Journal International, vol.209, issue.3, pp.1558-1571, 2017.

M. Shenoy, Y. Tjiptowidjojo, and D. Mcdowell, Microstructure-sensitive modeling of polycrystalline IN 100, International Journal of Plasticity, vol.24, issue.10, pp.1694-1730, 2008.

M. Shenoy, J. Zhang, and D. Mcdowell, Estimating fatigue sensitivity to polycrystalline Ni-base superalloy microstructures using a computational approach, Fatigue & Fracture of Engineering Materials & Structures, vol.30, issue.10, pp.889-904, 2007.

S. Sinha and S. Ghosh, Modeling cyclic ratcheting based fatigue life of HSLA steels using crystal plasticity FEM simulations and experiments, International Journal of Fatigue, vol.28, issue.12, pp.1690-1704, 2006.

L. Sirovich, Turbulence and the dynamics of coherent structures part III: Dynamics and scaling, Quarterly of Applied Mathematics, vol.45, issue.3, pp.583-590, 1987.

F. Siska, S. Forest, and P. Gumbsch, Simulations of stress-strain heterogeneities in copper thin films: Texture and substrate effects, Computational Materials Science, vol.39, issue.1, pp.137-141, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00148588

W. S. Slaughter, The linearized theory of elasticity, 2002.

B. Smith, D. Shih, and D. Mcdowell, Cyclic plasticity experiments and polycrystal plasticity modeling of three distinct Ti alloy microstructures, International Journal of Plasticity, vol.101, pp.1-23, 2018.

C. Soutis and P. W. Beaumont, Multi-scale modelling of composite material systems: the art of predictive damage modelling, 2005.

C. A. Stein, A. Cerrone, T. Ozturk, S. Lee, P. Kenesei et al., Fatigue crack initiation, slip localization and twin boundaries in a nickel-based superalloy, Current Opinion in Solid State and Materials Science, vol.18, issue.4, pp.244-252, 2014.

J. Stinville, M. Echlin, D. Texier, F. Bridier, P. Bocher et al., Subgrain scale digital image correlation by electron microscopy for polycrystalline materials during elastic and plastic deformation, Experimental Mechanics, vol.56, issue.2, pp.197-216, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01644841

F. Sun, E. D. Meade, and N. P. O'dowd, Microscale modelling of the deformation of a martensitic steel using the Voronoi tessellation method, Journal of the Mechanics and Physics of Solids, vol.113, pp.35-55, 2018.

L. Taleb and C. Keller, Experimental contribution for better understanding of ratcheting in 304l ss, International Journal of Mechanical Sciences, p.527, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01766036

H. E. Tresca, Sur l'écoulement des corps solides soumis à de fortes pressions, 1864.

A. Vince, A framework for the greedy algorithm, Discrete Applied Mathematics, vol.121, issue.1-3, pp.247-260, 2002.

J. L. Walley, R. Wheeler, M. D. Uchic, and M. J. Mills, In-Situ mechanical testing for characterizing strain localization during deformation at elevated temperatures, Experimental Mechanics, vol.52, issue.4, pp.405-416, 2012.

Y. Wang, D. Raabe, C. Klüber, and F. Roters, Orientation dependence of nanoindentation pile-up patterns and of nanoindentation microtextures in copper single crystals, Acta materialia, vol.52, issue.8, pp.2229-2238, 2004.

T. Wehner and A. Fatemi, Effects of mean stress on fatigue behaviour of a hardened carbon steel, International Journal of Fatigue, vol.13, issue.3, pp.241-248, 1991.

Z. Xia, D. Kujawski, and F. Ellyin, Effect of mean stress and ratcheting strain on fatigue life of steel, International Journal of Fatigue, vol.18, issue.5, pp.335-341, 1996.

C. L. Xie, S. Ghosh, and M. Groeber, Modeling cyclic deformation of HSLA steels using crystal plasticity, Journal of Engineering Materials and Technology, vol.126, p.4, 2004.

G. Yagawa and R. Shioya, Parallel finite elements on a massively parallel computer with domain decomposition, parallel Computational Methods for Large-Scale Structural Analysis and Design, vol.4, pp.495-503, 1993.

C. Yu, G. Kang, Q. Kan, and D. Song, A micromechanical constitutive model based on crystal plasticity for thermo-mechanical cyclic deformation of NiTi shape memory alloys, International Journal of Plasticity, vol.44, pp.161-191, 2013.

X. Yuan, W. Yu, S. Fu, D. Yu, and X. Chen, Effect of mean stress and ratcheting strain on the low cycle fatigue behavior of a wrought 316LN stainless steel, Materials Science and Engineering: A, vol.677, pp.193-202, 2016.

J. Yvonnet and Q. He, The reduced model multiscale method (R3M) for the non-linear homogenization of hyperelastic media at finite strains, Journal of Computational Physics, vol.223, issue.1, pp.341-368, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00693621

Z. Package, Non-linear material & structure analysis suite, 2013.

N. Zaafarani, D. Raabe, R. Singh, F. Roters, and S. Zaefferer, Threedimensional investigation of the texture and microstructure below a nanoindent in a Cu single crystal using 3D EBSD and crystal plasticity finite element simulations, Acta Materialia, vol.54, issue.7, pp.1863-1876, 2006.

M. Zecevic and M. Knezevic, Latent hardening within the elasto-plastic selfconsistent polycrystal homogenization to enable the prediction of anisotropy of AA6022-T4 sheets, International Journal of Plasticity, vol.105, pp.141-163, 2018.

M. Zecevic, Y. P. Korkolis, T. Kuwabara, and M. Knezevic, Dual-phase steel sheets under cyclic tension-compression to large strains: Experiments and crystal plasticity modeling, Journal of the Mechanics and Physics of Solids, vol.96, pp.65-87, 2016.

H. Zhang, M. Diehl, F. Roters, and D. Raabe, A virtual laboratory using high resolution crystal plasticity simulations to determine the initial yield surface for sheet metal forming operations, International Journal of Plasticity, vol.80, pp.111-138, 2016.

K. Zhang, J. W. Ju, Z. Li, Y. Bai, and W. Brocks, Micromechanics based fatigue life prediction of a polycrystalline metal applying crystal plasticity, Mechanics of Materials, vol.85, pp.16-37, 2015.

M. Zhang, R. Neu, and D. Mcdowell, Microstructure-sensitive modeling: Application to fretting contacts, International Journal of Fatigue, vol.31, issue.8, pp.1397-1406, 2009.

M. Zhang, J. Zhang, and D. Mcdowell, Microstructure-based crystal plasticity modeling of cyclic deformation of Ti-6Al-4V, International Journal of Plasticity, vol.23, issue.8, pp.1328-1348, 2007.

Z. Zhang, C. Thaulow, and J. Ødegård, A complete Gurson model approach for ductile fracture, Engineering Fracture Mechanics, vol.67, issue.2, pp.155-168, 2000.

Z. Zhao, M. Ramesh, D. Raabe, A. Cuitiño, and R. Radovitzky, Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal, International Journal of Plasticity, vol.24, issue.12, pp.2278-2297, 2008.