N. Rouet, Galvanized steel sheet in an automotive sector as a barometer of Zinc market growth, Presentation, Metal Bulletin -18th Zinc & its Markets Seminar, 2014.

A. Marcele-salgueiro, Mécanismes de corrosion de l'acier revêtu d'alliage à base de ZnMgAl en tests accélérés et en environnement naturel, PhD, Chimie inorganique, 2014.

, Metallic coated steel, ArcelorMittal Flat Carbon Europe 19, avenue de la Liberté L-2930 Luxembourg

S. Caporali, A. Fossati, A. Lavacchi, I. Perissi, A. Tolstogouzov et al., Aluminium Electroplated from Ionic Liquids as Protective Coating against Steel Corrosion, Corrosion Science, vol.50, pp.534-539, 2008.

O. A. Fasuba, A. Yerokhin, A. Matthews, and A. Leyland, Corrosion Behaviour and Galvanic Coupling with Steel of Al-Based Coating Alternatives to Electroplated Cadmium, Materials Chemistry and Physics, vol.141, pp.128-137, 2013.

S. Han, H. Li, S. Wang, L. Jiang, and X. Liu, Influence of Silicon on Hot-Dip Aluminizing Process and Subsequent Oxidation for Preparing Hydrogen/tritium Permeation Barrier, International Journal of Hydrogen Energy, vol.35, issue.7, pp.2689-2693, 2010.

Q. X. Liu, S. Z. Elabedin, and F. Endres, Electroplating of Mild Steel by Aluminium in a First Generation Ionic Liquid: A Green Alternative to Commercial Al-Plating in Organic Solvents, Surface and Coatings Technology, vol.201, pp.1352-1356, 2006.

Y. Du, J. Schuster, Z. Liu, R. Hu, P. Nash et al., A Thermodynamic Description of the Al-Fe-Si System over the Whole Composition and Temperature Ranges via a Hybrid Approach of CALPHAD and Key Experiments, Intermetallics, vol.16, pp.554-570, 2008.

N. Takata, M. Nishimoto, S. Kobayashi, and M. Takeyama, Morphology and Formation of Fe-Al Intermetallic Layers on Iron Hot-Dipped in Al-Mg-Si Alloy Melt, Intermetallics, vol.54, pp.136-142, 2014.

S. Milenkovic, V. Dalbert, R. Marinkovic, and A. W. Hassel, Selective matrix dissolution in an Al-Si eutectic, vol.51, pp.1490-1495, 2009.

H. Karbasian and A. Etekkaya, A Review on Hot Stamping, Journal of Materials Processing Technology, vol.210, pp.2103-2118, 2010.

C. Allely, L. Dosdat, O. Clauzeau, K. Ogle, and P. Volovitch, Anticorrosion Mechanisms of Aluminized Steel for Hot Stamping, Surface and Coatings Technology, vol.238, pp.188-196, 2014.

N. Birbilis and R. G. Buchheit, Electrochemical Characteristics of Intermetallic Phases in Aluminum Alloys, Journal of The Electrochemical Society, vol.152, pp.140-151, 2005.

F. Andreatta, Local Electrochemical Behaviour of 7xxx Aluminium Alloys, PhD, Applied Sciences, 2004.

X. Li, X. Nie, L. Wang, and D. O. Northwood, Corrosion protection properties of anodic oxide coatings on an Al-Si alloy, Surface & Coatings Technology, vol.200, pp.1994-2000, 2005.

. Wh, E. J. Hartt, K. E. Lemieux, and . Lucas, A Critical Review of Aluminum Anode Activation, Dissolution Mechanisms, and Performance, CORROSION, 2001.

. Dr, S. G. Salinas, J. B. Garcia, and . Bessone, Influence of Alloying Elements and Microstructure on Aluminium Sacrificial Anode Performance: Case of Al-Zn, Journal of Applied Electrochemistry, vol.29, pp.1063-1071, 1999.

N. Idusuyi, . Oo, and . Oluwole, Aluminum Anode Activation Reasearch -A review, International Journal of Science and Technology, pp.561-566, 2012.

S. Li, B. Gao, G. Tu, L. Hu, S. Sun et al., Effects of Magnesium on the Microstructure and Corrosion Resistance of Zn-55Al-1.6Si Coating, Construction and Building Materials, vol.71, pp.124-131, 2014.

W. Liu, M. Li, Q. Luo, H. Fan, J. Zhang et al., Influence of alloyed magnesium on the microstructure and long-term corrosion behavior of hot-dip Al-Zn-Si coating in NaCl solution, Corrosion Science, vol.104, pp.217-226, 2016.

Q. Li, Y. Z. Zhao, Q. Luo, S. L. Chen, J. Y. Zhang et al., Experimental study and phase diagram calculation in Al-Zn-Mg-Si quaternary system, Journal of Alloys and Compounds, vol.501, pp.282-290, 2010.

D. Pradhan, M. Manna, and M. Dutta, Al-Mg-Mn Alloy Coating on Steel with Superior Corrosion Behavior, Surface and Coatings Technology, vol.258, pp.405-414, 2014.

Y. Kyo, A. P. Yadav, A. Nishikata, and T. Tsuru, Hydrogen entry behaviour of newly developed Al-Mg-Si coating produced by physical vapour deposition, Corrosion Science, vol.53, pp.3043-3047, 2011.

A. Perez, A. Billard, C. Rébéré, C. Berziou, S. Touzain et al., Influence of metallurgical states on the corrosion behaviour of Al-Zn PVD coatings in saline solution, Corrosion Science, vol.74, pp.240-249, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02479608

Y. Prieto, Etude Comparative Du Comportement électrochimique Des Alliages D'aluminium 2024 T351 et 7075 T7351 En Milieu Neutre de Sulfate de Sodium, 2012.

D. Landolt, Corrosion et chimie de surfaces des métaux, PPUR presses polytechniques, vol.1, 1997.

. Aj, R. Bard, J. Parsons, and . Jordan, Standard Potentials in Aqueous Solution, 1985.

M. , Corrosion Des Alliages D'aluminium, Techniques de l'Ingénieur, p.325, 2005.

C. Vargel, Corrosion of Aluminium, pp.81-109, 2004.

M. , Corrosion mechanisms of AlSi(ZnMg) coated steel -40, 2014.

Z. Szklarska-smialowska, Pitting Corrosion of Aluminum, Corrosion Science, vol.41, pp.1743-1767, 1999.

A. Zazou and N. Azzouz, An Investigation on the Use of Indium to Increase Dissolution of AlZn Anodes in Sea Water, Materials & Design, vol.29, pp.806-810, 2008.

I. Gurrappa, Cathodic Protection of Cooling Water Systems and Selection of Appropriate Materials, Journal of Materials Processing Technology, vol.166, pp.256-267, 2005.

A. G. Muñoz, S. B. Saidman, and J. B. Bessone, Corrosion of an Al-Zn-In Alloy in Chloride Media, Corrosion Science, vol.44, pp.2171-2182, 2002.

. Jb and . Bessone, The Activation of Aluminium by Mercury Ions in Non-Aggressive Media, Corrosion Science, vol.48, pp.4243-4256, 2006.

. Sma, . Shibli, . Vs, and . Gireesh, Activation of Aluminium Alloy Sacrificial Anodes by Selenium, Corrosion Science, vol.47, pp.2091-2097, 2005.

. Do, S. B. Flamini, J. B. Saidman, and . Bessone, Aluminium Activation Produced by Gallium, vol.48, pp.1413-1425, 2006.

. Nl, A. E. Sukiman, G. E. Hughes, J. Thompson, and . Mol, Durability and Corrosion of Aluminium and Its Alloys: Overview, Property Space, Techniques and Developments, 2012.

H. Ezuber, A. El-houd, and F. El-shawesh, A Study on the Corrosion Behavior of Aluminum Alloys in Seawater, Materials & Design, vol.29, pp.801-805, 2008.

N. Birbilis and . Buchheit, Electrochemical characteristics of intermetallic phases in aluminum alloys an experimental survey and discussion, Journal of The Electrochemical Society, vol.152, issue.4, pp.140-151

N. Birbilis and . Buchheit, Investigation and discussion of characteristics for intermetallic phases common to aluminum alloys as a function of solution pH, Journal of The Electrochemical Society, vol.155, issue.3, pp.117-126

R. Ambat, A. J. Davenport, G. M. Scamans, and A. Afseth, Effect of Iron-Containing Intermetallic Particles on the Corrosion Behaviour of Aluminium, Corrosion Science, vol.48, issue.11, pp.3455-3471, 2006.

C. Allely, T. Machado, C. Klam, and S. Optigal, Maizières Les Metz, 2015.

J. Han and K. Ogle, Dealloying of MgZn2 Intermetallic in Slightly Alkaline Chloride Electrolyte and Its Significance in Corrosion Resistance, Journal of The Electrochemical Society, vol.164, issue.14, pp.952-961, 2017.

R. Hausbrand, M. Hausbrand, M. Rohwerder, C. Stratmann, B. Schwerdt et al., Model Study on the Corrosion of Magnesium-Containing Zinc Coatings on Steel Sheets, Galvatech, International Conference on zinc and zinc ally coated steel sheet, pp.161-167, 2001.

F. Zeng, Z. Wei, C. Li, X. Tan, and Z. Zhang, Corrosion Mechanism Associated with Mg2Si and Si Particles in Al-Mg-Si Alloys, vol.21, pp.2559-2567, 2011.

K. Ogle, J. Baeyens, J. Swiatowska, and P. Volovitch, Atomic emission spectroelectrochemistry applied to dealloying phenomena: I. The formation and dissolution of residual copper films on stainless steel, Electrochim. Acta, vol.54, pp.5163-5170, 2009.

M. Mokaddem, P. Volovitch, F. Rechou, R. Oltra, and K. Ogle, The anodic and cathodic dissolution of Al and Al-Cu-Mg alloy, Electrochim. Acta, vol.55, pp.3779-3786, 2010.

J. Swiatowska, P. Volovitch, and K. Ogle, The anodic dissolution of Mg in NaCl and Na2SO4 electrolytes by atomic emission spectroelectrochemistry, Corros. Sci, vol.52, pp.2372-2378, 2010.

K. Ogle, M. Mokaddem, and P. Volovitch, Atomic emission spectroelectrochemistry applied to dealloying phenomena II. Selective dissolution of iron and chromium during active -passive cycles of an austenitic stainless steel, Electrochimica Acta, vol.55, pp.913-921, 2010.

V. Shkirskiy, A. Maltseva, K. Ogle, and P. Volovitch, Environmental effects on selective dissolution from ZnAlMg alloy under low frequency alternating current perturbations, Electrochimica Acta, pp.238-397, 2017.

V. Shkirskiy, P. Volovitch, and V. Vivier, Development of quantitative Local Electrochemical Impedance Mapping: an efficient tool for the evaluation of delamination kinetics, Electrochimica Acta, pp.442-452, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01498668

A. C. Bastos, O. V. Karavai, M. L. Zheludkevich, K. A. Yasakau, and M. G. Ferreira, Localised Measurements of pH and Dissolved Oxygen as Complements to SVET in the Investigation of Corrosion at Defects in Coated Aluminum Alloy, Electroanalysis, 2010.

W. B. Nowak, Thin metallic films for corrosion control, Metallurgical Coatings and Thin Films, pp.71-77, 1991.

K. Ogle, S. Morel, and D. Jacquet, Observation of self-healing functions on the cut edge of galvanized steel using SVET and pH microscopy, Journal of The Electrochemical Society, vol.153, pp.1-5, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00109464

F. Thebault, B. Vuillemina, R. Oltra, K. Ogle, and C. Allely, Investigation of self-healing mechanism on galvanized steels cut edges by coupling SVET and numerical modeling, Electrochimica Acta, vol.53, pp.5226-5234, 2008.

F. Zeng, Z. Wei, C. Li, X. Tan, and Z. Zhang, Corrosion mechanism associated with Mg2Si and Si particles in Al-Mg-Si alloys, Transactions of Nonferrous Metals Society of China, vol.21, pp.2559-2567, 2011.

S. Han, H. Li, S. Wang, L. Jiang, and X. Liu, Influence of silicon on hot-dip aluminizing process and subsequent oxidation for preparing hydrogen/tritium permeation barrier, International Journal of Hydrogen Energy, vol.35, pp.2689-2693, 2010.

M. Azevedo, C. Allely, K. Ogle, and P. Volovitch, Corrosion mechanisms of Zn(Mg, Al) coated steel in accelerated tests and natural exposure: 1. The role of electrolyte composition in the nature of corrosion products and relative corrosion rate, Corrosion Science, vol.90, pp.472-481, 2015.

A. Bahadur, Aluminum coatings for steel, Materials and Manufacturing Processes, pp.225-232, 1996.

N. Takata, M. Nishimoto, S. Kobayashi, and M. Takeyama, Morphology and formation of Fe-Al intermetallic layers on iron hot-dipped in Al-Mg-Si alloy melt, Intermetallics, vol.54, pp.136-142, 2014.

C. Allely, L. Dosdat, O. Clauzeau, K. Ogle, and P. Volovitch, Anticorrosion mechanisms of aluminized steel for hot stamping, Surface and Coatings Technology, vol.238, pp.188-196, 2014.

Z. Szklarska-smialowska, Pitting corrosion of Al, Corrosion Science, vol.41, pp.1743-1767, 1999.

C. Vargel, Corrosion of Aluminium, pp.81-109, 2004.

I. Degraeve, I. Schoukens, A. Lanzutti, F. Andreatta, A. Alvarez-pampliega et al., Mechanism of corrosion protection of hot-dip aluminiumsilicon coatings on steel studied by electrochemical depth profiling, Corrosion Science, vol.76, pp.325-336, 2013.

A. Alvarez-pampliega, S. V. Lamaka, M. G. Taryba, M. Madani, J. De et al., Cut-edge corrosion study on painted aluminum rich metallic coated steel by scanning vibrating electrode and micro-potentiometric techniques, Electrochimica Acta, vol.61, pp.107-117, 2012.

S. Li, B. Gao, G. Tu, L. Hu, S. Sun et al., Effects of Mg on the Microstructure and Corrosion Resistance of Zn-55Al-1.6Si Coating, Construction and Building Materials, vol.71, pp.124-131, 2014.

W. Liu, M. Li, Q. Luo, H. Fan, J. Zhang et al., Influence of alloyed Mg on the microstructure and long-term corrosion behavior of hot-dip Al-Zn-Si coating in NaCl solution, Corrosion Science, vol.104, pp.217-226, 2016.

W. H. Hartt, E. J. Lemieux, and K. E. Lucas, A critical review of Al anode activation, dissolution mechanisms, and performance, CORROSION, 2001.

D. R. Salinas, S. G. Garcia, and J. B. Bessone, Influence of alloying elements and microstructure on aluminium sacrificial anode performance: case of Al-Zn, Journal of Applied Electrochemistry, vol.29, pp.1063-1071, 1999.

J. Macanás, L. Soler, A. Candela, M. Muñoz, and J. Casado, Hydrogen generation by aluminum corrosion in aqueous alkaline solutions of inorganic promoters: The AlHidrox process, Energy, vol.36, pp.2493-2501, 2011.

M. , Corrosion des alliages d'aluminium, Techniques de l'Ingénieur, p.325, 2005.

N. A. Belov, D. G. Eskin, and A. A. Aksenov, Multicomponent phase diagrams: applications for commercial Al alloys, pp.193-222, 2005.

J. Soto, G. Aramburo, C. Gonzalez, J. Genesca, R. Herrera et al., Juarez-Islas, Distribution and prediction of solute in Al-Zn-Mg alloys, Materials Science and Engineering, 2005.

A. Q. Vu, B. Vuillemin, R. Oltra, and C. Allély, In situ investigation of sacrificial behaviour of hot dipped AlSi coating in sulphate and chloride solutions, Corrosion Science, vol.70, pp.112-118, 2013.

N. Birbilis and R. G. Buchheit, Electrochemical characteristics of intermetallic phases in aluminum alloys, Journal of The Electrochemical Society, vol.152, pp.140-151, 2005.

F. Andreatta, Local electrochemical behaviour of 7xxx aluminium alloys, PhD, Applied Sciences, 2004.

Q. Li, Y. Z. Zhao, Q. Luo, S. L. Chen, J. Y. Zhang et al., Experimental study and phase diagram calculation in Al-Zn-Mg-Si quaternary system, Journal of Alloys and Compounds, vol.501, pp.282-290, 2010.

R. Valdes, A. Freulon, J. Deschamps, M. Qian, and J. Lacaze, Phase equilibria and solidification of Mg-rich Al-Mg-Si alloys, Materials Science Forum, vol.508, pp.621-628, 2006.

P. Volovitch, L. Barrallier, and W. Saikaly, Microstructure and corrosion resistance of Mg alloy ZE41 with laser surface cladding by Al-Si powder, Surface and Coatings Technology, vol.202, pp.4901-4914, 2008.

M. Azevedo, C. Allely, K. Ogle, and P. Volovitch, Corrosion mechanisms of Zn(Mg,Al) coated steel: 2. The effect of Mg and Al alloying on the formation and properties of corrosion products in different electrolytes, Corrosion Science, vol.90, pp.482-490, 2015.

M. Azevedo, C. Allely, K. Ogle, and P. Volovitch, Corrosion mechanisms of Zn(Mg,Al) coated steel: The effect of HCO3_ and NH4+ ions on the intrinsic reactivity of the coating, Electrochimica Acta, vol.153, pp.159-169, 2015.

T. Ishikawa, M. Ueda, K. Kandori, and T. Nakayama, Air permeability of the artificially synthesized Zn-Al-Mg alloy rusts, Corrosion Science, vol.49, pp.2547-2556, 2007.

P. S. Braterman, Layered Double Hydroxides: synthesis, characterization and interaction of Mg-Al systems with intercalated tetracyanonickelate (II), 2004.

X. Duan and G. Evans, Layered Double Hydroxides, book, 2006.

P. Visser, Y. Gonzalez-garcia, J. M. Mol, and H. Terryn, Mechanism of passive layer formation on AA2024-T3 from alkaline lithium carbonate solutions in the presence of sodium chloride, Journal of The Electrochemical Society, vol.165, issue.2, pp.60-70, 2018.

F. Beier, K. Dtellnberger, and S. Geisler, A new accelerated cyclic corrosion test for automotive substrates, Proceeding of the Eurocorr, 2009.

J. P. Laurent, J. P. Hennechart, D. Spehner, and J. Devroc, Coated hot-and cold-rolled steel sheet comprising a very high resistance after thermal treatment, Patent 6296805B1, issued October, 2001.

D. Landolt, Corrosion et chimie de surfaces des métaux, PPUR presses polytechniques, vol.1, 1997.

Y. Du, J. Schuster, Z. Liu, R. Hu, P. Nash et al., A Thermodynamic Description of the Al-Fe-Si System over the Whole Composition and Temperature Ranges via a Hybrid Approach of CALPHAD and Key Experiments, Intermetallics, vol.16, pp.554-570, 2008.

M. Serdechnova, P. Volovitch, and K. Ogle, Atomic emission spectroelectrochemistry study of the degradation mechanism of model high temperature paint containing sacrificial aluminum particles, Surf. Coat. Technol, vol.206, pp.2133-2139, 2012.

L. Wei, L. Qian, and L. Mou-cheng, Corrosion behaviour of hot-dip Al-Zn-Si and Al-Zn-Si-3Mg coatings in NaCl solution, Corrosion Science, vol.121, pp.72-83, 2017.

X. Zhang, T. Vu, P. Volovitch, C. Leygraf, K. Ogle et al., The initial release of Zn and Al from non-treated Galvalume and the formation of corrosion products in chloride containing media, Applied Surface Science, vol.258, pp.4351-4359, 2012.

X. G. Zhang, Corrosion and Electrochemistry of Zinc, pp.157-178, 1996.

J. P. Laurent, J. P. Hennechart, D. Spehner, and J. Devroc, Coated hot-and cold-rolled steel sheet comprising a very high resistance after thermal treatment

A. Bahadur, Aluminum coatings for steel, Materials and Manufacturing Processes, pp.225-232, 1996.

I. Degraeve, I. Schoukens, A. Lanzutti, F. Andreatta, A. Alvarez-pampliega et al., Mechanism of corrosion protection of hot-dip aluminium-silicon coatings on steel studied by electrochemical depth profiling, Corrosion Science, vol.76, pp.325-336, 2013.

J. Stoulil, Corrosion properties of model aluminium alloys for coating steel substrate, Materials and Corrosion, vol.68, issue.1, pp.77-81, 2017.

C. Kruehong, Influence of second phases on the electrochemical behavior of hot dipped Al-Mg-Si coated steel, Corrosion Science, vol.52, issue.7, pp.2379-2386, 2010.

Y. Kyo, Hydrogen entry behaviour of newly developed Al-Mg-Si coating produced by physical vapour deposition, Corrosion Science, vol.53, issue.9, pp.3043-3047, 2011.

S. Han, H. Li, S. Wang, L. Jiang, and X. Liu, Influence of Silicon on Hot-Dip Aluminizing Process and Subsequent Oxidation for Preparing Hydrogen/tritium Permeation Barrier, International Journal of Hydrogen Energy, vol.35, pp.2689-2693, 2010.

S. Li, B. Gao, G. Tu, L. Hu, S. Sun et al., Effects of Magnesium on the Microstructure and Corrosion Resistance of Zn-55Al-1.6Si Coating, Construction and Building Materials, vol.71, pp.124-131, 2014.

Y. Du, J. Schuster, Z. Liu, R. Hu, P. Nash et al., A Thermodynamic Description of the Al-Fe-Si System over the Whole Composition and Temperature Ranges via a Hybrid Approach of CALPHAD and Key Experiments, Intermetallics, vol.16, pp.554-570, 2008.

N. Birbilis and R. G. Buchheit, Electrochemical Characteristics of Intermetallic Phases in Aluminum Alloys, Journal of The Electrochemical Society, vol.152, pp.140-151, 2005.

C. Vargel, Corrosion of Aluminium, pp.81-109, 2004.

D. Landolt, Corrosion et chimie de surfaces des métaux, PPUR presses polytechniques, vol.1, 1997.

F. Andreatta, Local Electrochemical Behaviour of 7xxx Aluminium Alloys, PhD, Applied Sciences, 2004.

. Hd, A. K. Manesh, and . Taheri, Bond Strength and Formability of an Aluminum-Clad Steel Sheet, Journal of Alloys and Compounds, vol.361, issue.1-2, p.113, 2003.

P. Volovitch, L. Barrallier, and W. Saikaly, Microstructure and Corrosion Resistance of Magnesium Alloy ZE41 with Laser Surface Cladding by Al-Si Powder, Surface and Coatings Technology, vol.202, pp.4901-4914, 2008.

O. Gharbi and N. Birbilis, Clarifying the Dissolution Mechanisms and Electrochemistry of Mg2Si as a Function of Solution pH, Journal of The Electrochemical Society, vol.165, issue.9, pp.497-501, 2018.

M. Azevedo, C. Allely, K. Ogle, and P. Volovitch, Corrosion mechanisms of Zn(Mg, Al) coated steel in accelerated tests and natural exposure: 1. The role of electrolyte composition in the nature of corrosion products and relative corrosion rate, Corrosion Science, vol.90, pp.472-481, 2015.

F. Beier, K. Dtellnberger, and S. Geisler, A new accelerated cyclic corrosion test for automotive substrates, Proceeding of the Eurocorr, 2009.

M. Azevedo, C. Allely, K. Ogle, and P. Volovitch, Corrosion mechanisms of Zn(Mg,Al) coated steel: 2. The effect of Mg and Al alloying on the formation and properties of corrosion products in different electrolytes, Corrosion Science, vol.90, pp.482-490, 2015.

J. Han and K. Ogle, Cathodic Dealloying of ?-Phase Al-Zn in Slightly Alkaline Chloride Electrolyte and Its Consequence for Corrosion Resistance, Journal of The Electrochemical Society, vol.165, issue.7, pp.334-342, 2018.

D. R. Salinas, S. G. Garcia, and J. B. Bessone, Influence of alloying elements and microstructure on aluminium sacrificial anode performance: case of Al-Zn, Journal of Applied Electrochemistry, vol.29, pp.1063-1071, 1999.

C. Allely, L. Dosdat, O. Clauzeau, K. Ogle, and P. Volovitch, Anticorrosion mechanisms of aluminized steel for hot stamping, Surface and Coatings Technology, vol.238, pp.188-196, 2014.

C. Nicard, C. Allély, and P. Volovitch, Effect of Zn and Mg alloying on microstructure and anticorrosion mechanisms of AlSi based coatings for high strength steel, Corrosion Science, 2018.

I. Puigdomenech, Hydra/Medusa Chemical Equilibrium Database and Plotting Software KTH Royal Institute of Technology, 2004.

K. Ogle, J. Baeyens, J. Swiatowska, and P. Volovitch, Atomic emission spectroelectrochemistry applied to dealloying phenomena: I. The formation and dissolution of residual copper films on stainless steel, Electrochim. Acta, vol.54, pp.5163-5170, 2009.

K. Ogle, M. Mokaddem, and P. Volovitch, Atomic emission spectroelectrochemistry applied to dealloying phenomena II. Selective dissolution of iron and chromium during active -passive cycles of an austenitic stainless steel, Electrochim. Acta, vol.55, pp.913-921, 2010.

M. Mokaddem, P. Volovitch, and K. Ogle, The anodic dissolution of zinc and zinc alloys in alkaline solution. I. Oxide formation on electrogalvanized steel, Electrochim. Acta, vol.55, pp.7867-7875, 2010.

M. , Corrosion Des Alliages D'aluminium, Techniques de l'Ingénieur, p.325, 2005.

, Corrosion mechanisms of AlSi(ZnMg) coated steel -114

Y. Andreev and A. V. Goncharov, Thermodynamic calculation and experimental investigation of the surface enrichment of electrochemically activated Al-Me (Sn, In, Zn) alloys, Electrochimica Acta, vol.50, issue.13, pp.2629-2637, 2005.

T. Ishikawa, M. Ueda, K. Kandori, and T. Nakayama, Air Permeability of the Artificially Synthesized Zn-Al-Mg Alloy Rusts, Corrosion Science, vol.49, pp.2547-2556, 2007.

. Ps and . Braterman, Layered Double Hydroxides: Synthesis, Characterization and Interaction of Mg-Al Systems with Intercalated Tetracyanonickelate (II), 2004.

M. , Corrosion Des Alliages D'aluminium, Techniques de l'Ingénieur, p.325, 2005.

C. Vargel, Corrosion of Aluminium, pp.81-109, 2004.

C. Nicard, C. Allély, and P. Volovitch, Effect of Zn and Mg alloying on microstructure and anticorrosion mechanisms of AlSi based coatings for high strength steel, Corrosion science, 2018.

S. Han, H. Li, S. Wang, L. Jiang, and X. Liu, Influence of Silicon on Hot-Dip Aluminizing Process and Subsequent Oxidation for Preparing Hydrogen/tritium Permeation Barrier, International Journal of Hydrogen Energy, vol.35, pp.2689-2693, 2010.

C. Nicard, C. Allély, and P. Volovitch, Galvanic coupling and selective dissolution of pure phases in AlSi(ZnMg) anticorrosion coatings for high strength steel, Journal, 2018.

. Dr, S. G. Salinas, J. B. Garcia, and . Bessone, Influence of Alloying Elements and Microstructure on Aluminium Sacrificial Anode Performance: Case of Al-Zn, Journal of Applied Electrochemistry, vol.29, pp.1063-1071, 1999.

. Wh, E. J. Hartt, K. E. Lemieux, and . Lucas, A Critical Review of Aluminum Anode Activation, Dissolution Mechanisms, and Performance, CORROSION, 2001.

R. Hausbrand, M. Rohwerder, M. Stratmann, C. Schwerdt, B. Schuhmacher et al.,

, Grundmeier, Model Study on the Corrosion of Magnesium-Containing Zinc Coatings on Steel Sheets, pp.161-167, 2001.

F. Zeng, Z. Wei, C. Li, X. Tan, and Z. Zhang, Corrosion Mechanism Associated with Mg2Si and Si Particles in Al-Mg-Si Alloys, vol.21, pp.2559-2567, 2011.

X. Zhang, T. Vu, P. Volovitch, C. Leygraf, K. Ogle et al., The Initial Release of Zinc and Aluminum from Non-Treated Galvalume and the Formation of Corrosion Products in Chloride Containing Media, Applied Surface Science, vol.258, pp.4351-4359, 2012.

T. Ishikawa, M. Ueda, K. Kandori, and T. Nakayama, Air Permeability of the Artificially Synthesized Zn-Al-Mg Alloy Rusts, Corrosion Science, vol.49, pp.2547-2556, 2007.

. Ps and . Braterman, Layered Double Hydroxides: Synthesis, Characterization and Interaction of Mg-Al Systems with Intercalated Tetracyanonickelate (II), 2004.

P. Nalawade, B. Aware, V. J. Kadam, and R. S. Hirlekar, Layered Double Hydroxide: A review, pp.267-272, 2009.

X. Duan and G. Evans, Layered Double Hydroxides, book, p.139, 2006.

F. Zhang, L. Zhao, H. Chen, S. Xu, D. G. Evans et al., Corrosion Resistance of Superhydrophobic Layered Double Hydroxide Films on Aluminum, Angew. Chem. Int. Ed, vol.47, pp.2466-2469, 2008.

M. L. Zheludkevich, S. K. Poznyak, L. M. Rodrigues, D. Raps, T. Hack et al., Active protection coatings with layered double hydroxide nanocontainers of corrosion inhibitor, Corrosion Science, vol.52, pp.602-611, 2010.

V. Shkirskiy, A. Maltseva, K. Ogle, and P. Volovitch, Environmental effects on selective dissolution from ZnAlMg alloy under low frequency alternating current perturbations, Electrochimica Acta, pp.238-397, 2017.

V. Shkirskiy, P. Volovitch, and V. Vivier, Development of quantitative Local Electrochemical Impedance Mapping: an efficient tool for the evaluation of delamination kinetics, Electrochimica Acta, pp.442-452, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01498668

F. Thebault, B. Vuillemina, R. Oltraa, K. Ogle, and C. Allely, Investigation of self-healing mechanism on galvanized steels cut edges by coupling SVET and numerical modeling, Electrochimica Acta, vol.53, pp.5226-5234, 2008.

K. Ogle, S. Morel, and D. Jacquet, Observation of Self-Healing Functions on the Cut Edge of Galvanized Steel Using SVET and pH Microscopy, vol.153, pp.1-1, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00109464

J. P. Laurent, J. P. Hennechart, D. Spehner, and J. Devroc, Coated hot-and cold-rolled steel sheet comprising a very high resistance after thermal treatment, Patent 6296805B1, issued October, 2001.

Y. Liu and Z. Yang, Intercalation of Sulfate Anion into a Zn-Al Layered Double Hydroxide: Synthesis and Application in Zn-Ni Secondary Battery, p.73, 2016.

. Jb and . Bessone, The Activation of Aluminum by Mercury Ions in Non-Aggressive Media, Corrosion Science, vol.48, pp.4243-4256, 2006.