K. Adachi, A. Yoshikawa, and K. Sakurai, A Study on Burr Low Frequency Vibratory Drilling, Materials Forum, vol.28, pp.178-183, 2004.

, Couple outil-matière. Norme NF E66-520-8, AFNOR, 2000.

G. Albert, Identification et modélisation du torseur des actions de coupe en fraisage, 2010.

B. Azarhoushang and J. Akbari, Ultrasonic-assisted drilling of Inconel 738-LC, International Journal of Machine Tools and Manufacture, vol.47, issue.7-8, pp.1027-1033, 2007.

F. Bagur, Matériaux pour outils de coupe. Les Techniques de l'Ingénieur, bm7080, pp.1-16, 2008.

S. A. Batzer, D. M. Haan, P. D. Rao, W. W. Olson, and J. W. Sutherland, Chip morphology and hole surface texture in the drilling of cast Aluminum alloys, Journal of Materials Processing Technology, vol.79, issue.1-3, pp.72-78, 1998.

S. A. Batzer, A. M. Gouskov, and S. A. Voronov, Modeling the Vibratory drilling process. ASME Design Engineering Technical Conferences, pp.1-14, 1999.

S. Bissey, Développement d'un modèle d'efforts de coupe applicable à des familles d'outils : cas du fraisage des aciers traités thermiquement, 2005.

C. F. Bisu, Etude des vibrations auto-entretenues en coupe tridimensionnelle : nouvelle modélisation appliquée au tournage, 2007.

D. Bondarenko, Etude mésoscopique de l'interaction mécanique outil/pièce et contribution sur le comportement dynamique du système usinant, 2010.

D. Bondarenko, H. Paris, and A. M. Gouskov, Influence du talonnage sur la stabilité du système usinant. 19ème Congrès Français de Mécanique, pp.24-28, 2009.

C. Bonnet, Compréhension des mécanismes de coupe lors du perçage à sec de l'empilage Ti6Al4V/Composite fibre de carbone, École Nationale Supérieure d'Arts et Métiers, 2010.

M. J. Bono and J. Ni, The Indentation Zone of a Twist Drill, North American Manufacturing Research Conference, 2001.

C. Brezinski, Méthodes numériques de base : Algèbre numérique. Les Techniques de l'Ingénieur, af1220, pp.1-22, 2006.

E. Brinksmeier and R. Janssen, Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), titanium and aluminum alloys, CIRP Annals-Manufacturing Technology, vol.51, issue.1, pp.87-90, 2002.

E. Brinksmeier, O. Pecat, and R. Rentsch, Quantitative analysis of chip extraction in drilling of Ti6Al4V, CIRP Annals -Manufacturing Technology, vol.64, issue.1, pp.93-96, 2015.

M. Calamaz, Approche expérimentale et numérique de l'usinage à sec de l'alliage aéronautique TA6V, 2008.

H. Chanal, E. Duc, and P. Ray, A study of the impact of machine tool structure on machining processes, International Journal of Machine Tools and Manufacture, vol.46, issue.2, pp.98-106, 2006.

S. S. Chang and G. M. Bone, Burr height model for vibration assisted drilling of aluminum 6061-T6. Precision Engineering, vol.34, pp.369-375, 2010.

S. S. Chang and G. M. Bone, Burr size reduction in drilling by ultrasonic assistance, Robotics and Computer-Integrated Manufacturing, vol.21, pp.442-450, 2005.

S. S. Chang and G. M. Bone, Thrust force model for vibration-assisted drilling of aluminum 6061-T6, International Journal of Machine Tools and Manufacture, vol.49, issue.14, pp.1070-1076, 2009.

J. Charron, Mesures sans contact -Généralités. Les Techniques de l'Ingénieur, r1330, pp.1-4, 2003.

K. Cheng, Machining Dynamics -Fundamentals Applications and Practices, 2009.

C. Claudin, Influence des conditions opératoires sur le procédé de perçage : Application aux structures mécano-soudées en acier bas carbone, Ecole Nationale Supérieur d'Arts et Métiers, 2006.

C. Claudin, G. Poulachon, and M. Lambertin, Correlation between drill geometry and mechanical forces in MQL conditions, Machining Science and Technology, vol.12, issue.1, pp.133-144, 2008.

A. Collignan, Méthode d'optimisation et d'aide à la decision en conception mécanique : application à une structure aéronautique, 2011.

F. Dargnat, Modélisation semi-analytique par approche énergétique du procédé de perçage de matériaux monolithiques, 2006.

B. Denkena, D. Boehnke, and J. H. Dege, Helical milling of CFRP-titanium layer compounds, CIRP Journal of Manufacturing Science and Technology, vol.1, issue.2, pp.64-69, 2008.

F. Ducobu, E. Filippi, and E. Rivière-lorphèvre, Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale. 19ème Congrès Français de Mécanique, pp.24-28, 2009.

C. Dumas, S. Caro, M. Chérif, S. Garnier, and B. Furet, A methodology for joint stiffness identification of serial robots, IEEE/RSJ International Conference on Intelligent Robots and Systems, Tapei, pp.464-469, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01693120

T. I. El-wardany, D. Gao, and M. A. Elbestawi, Tool condition monitoring in drilling using vibration signature analysis, International Journal of Machine Tools and Manufacture, vol.36, issue.6, pp.687-711, 1996.

M. Eynian and Y. Altintas, Chatter Stability of General Turning Operations With Process Damping, Journal of Manufacturing Science and Engineering, vol.131, issue.4, pp.41005-041005, 2009.

E. Felder, Modélisation de la coupe des métaux. Les Techniques de l'Ingénieur, vol.7041, p.33, 2006.

E. Felder, Procédés d'usinage -Présentation. Les Techniques de l'Ingénieur, bm7000, pp.1-14, 2008.

V. Gagnol, Modélisation du comportement dynamique des électrobroches UGV, 2006.

M. Geldart, P. Webb, H. Larsson, M. Backstrom, N. Gindy et al., A direct comparison of the machining performance of a variax 5 axis parallel kinetic machining centre with conventional 3 and 5 axis machine tools, International Journal of Machine Tools and Manufacture, vol.43, issue.11, pp.1107-1116, 2003.

D. Germain, Développement d'un modèle d'efforts de coupe intégrant le contact en dépouille: application au tournage de superfinition du cuivre Cu-c2, 2011.

A. Girard, Dynamique des structures -Techniques d'analyse et d'essai. Les Techniques de l'Ingénieur, b5150, pp.1-21, 1997.

A. M. Gouskov, S. A. Voronov, and S. A. Batzer, Chatter synchronization in vibratory drilling, Dynamics, Acoustics and Simulations/ASME, vol.68, pp.263-270, 2000.

N. Guibert, Etude et modélisation de l'influence des phénomènes de coupe sur les performances du forage vibratoire, Université Joseph Fourier -Grenoble, vol.1, 2008.

N. Guibert, H. Paris, J. Rech, and C. Claudin, Identification of thrust force models for vibratory drilling, International Journal of Machine Tools and Manufacture, vol.49, issue.9, pp.730-738, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00364673

N. Guibert, H. Paris, and J. Rech, A numerical simulator to predict the dynamical behavior of the self-vibratory drilling head, International Journal of Machine Tools and Manufacture, vol.48, issue.6, pp.644-655, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00186793

S. Hoppe, Experimental and numerical analysis of chip formation in metal cutting, 2003.

J. Jallageas, J. Y. Chérif, M. Cahuc, and C. , Modeling and optimization of vibration-assisted drilling on positive feed drilling unit, International Journal of Advanced Manufacturing Technology, vol.67, issue.5-8, pp.1205-1216, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02022506

J. Jallageas, M. Chérif, J. Y. Cahuc, and C. , Modélisation du perçage vibratoire sur UPA. 20ème Congrès Français de Mécanique, pp.1-6, 2011.

J. Jallageas, Optimisation du perçage de multi-matériaux sur unité de perçage automatique (UPA), 2013.

J. Jallageas, M. Chérif, C. Cahuc, and J. Y. , Système vibratoire. Demande de brevet : WO 2014125182 A1, 2014.

M. Jrad, Modélisation du perçage à grande vitesse: approches analytique, numérique et expérimentale, 2007.

F. Ke, J. Ni, and D. A. Stephenson, Chip thickening in deep-hole drilling, International Journal of Machine Tools and Manufacture, vol.46, pp.1500-1507, 2006.

F. Ke, J. Ni, and D. A. Stephenson, Continuous chip formation in drilling, International Journal of Machine Tools and Manufacture, vol.45, issue.15, pp.1652-1658, 2005.

S. Laporte, E. Gueydon, A. Auffret, and C. De-castelbajac, A New Robotic Vibration-Drilling Process, SAE International Journal of Materials and Manufacturing, vol.8, issue.1, pp.2014-2015, 2014.

S. Laporte, Comportement et endommagement de l'outil en perçage à sec : applications aux assemblages aéronautiques, 2005.

S. Laporte and C. De-castelbajac, Major Breakthrough in Multi Material Drilling, Using Low Frequency Axial Vibration Assistance, SAE International Journal of Materials and Manufacturing, vol.6, pp.1-12, 2013.

J. Ledref, Contribution à la modélisation du perçage assisté par vibration et à l'étude de son impact sur la qualité d'alésage. Application aux empilages mutli-matériaux, 2014.

J. Lonfier, Cartographie synthétique des connaissances en perçage vibratoires dans le but de proposer un modèle d'aide à la détermination des paramètres du procédé. Mémoire d'ingénieur. Conservation National des Arts et Métiers, 2013.

J. Lonfier and C. De-castelbajac, A Comparison between Regular and Vibration-Assisted Drilling in CFRP/Ti6Al4V Stack, SAE International Journal of Materials and Manufacturing, vol.8, issue.1, pp.2014-2015, 2014.

U. Masciantonio and G. F. Moraru, Dispositif d'usinage vibratoire, pp.2014195647-2014195648, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01488743

J. Mathew, N. Ramakrishnan, and N. K. Naik, Investigations into the effect of geometry of a trepanning tool on thrust and torque during drilling of GFRP composites, Journal of Materials Processing Technology, vol.91, issue.1, pp.1-11, 1999.

C. Mauch and L. Lauderbaugh, Modeling the Drilling Process-An Analytical Model to Predict Thrust Force and Torque. Computer Modeling and Simulation of Manufacturing Processes, ASME PED, vol.48, pp.59-65, 1990.

J. C. Mellinger, O. B. Ozdoganlar, R. E. Devor, and S. G. Kapoor, Modeling Chip-Evacuation Forces in Drilling for Various Flute Geometries, Journal of Manufacturing Science and Engineering, vol.125, issue.3, p.405, 2003.

M. E. Merchant, Mechanics of the Metal Cutting Process. I : Orthogonal Cutting and a Type 2 Chip, Journal of Applied Physics, vol.16, issue.5, p.267, 1945.

. Micro-epsilon, Capteurs de déplacement, de distance et de position, 2015.

L. Moal and G. , Multisensor monitoring of aeronautical drilling / countersinking operations, 2012.
URL : https://hal.archives-ouvertes.fr/pastel-00872459

G. F. Moraru, Usinage assisté par vibrations. Formation doctorale : Techniques d'usinage avancées. Arts et Métiers ParisTech, 2014.

G. F. Moraru, B. Picard, and D. , Dispositif de perçage à oscillations axiales, pp.2892959-2892960, 2005.

G. F. Moraru, P. Veron, and P. Rabate, Tête de perçage à vibrations axiales, pp.2944722-2944723, 2009.

M. R. Moreau, Force et Couple. Les Techniques de l'Ingénieur, r1820, pp.1-19, 1992.

P. Naisson, Développement de portes outils, d'outils et de modèles pour la maîtrise du perçage vibratoire, 2011.

R. Neugebauer and A. Stoll, Ultrasonic application in drilling, Journal of Materials Processing Technology, pp.633-639, 2004.

L. Noels, Contributions aux algorithmes d'intégration temporelle conservant l'énergie en dynamique non-linéaire des structures, 2004.

K. Okamura, H. Sasahara, T. Segawa, and M. Tsutsumi, Low-Frequency Vibration Drilling of Titanium Alloy, JSME International Journal Series C, vol.49, issue.1, pp.76-82, 2006.

P. L. Oxley and H. T. Young, The mechanics of machining: an analytical approach to assessing machinability, pp.136-182, 1989.

H. Paris, D. Brissaud, A. M. Gouskov, N. Guibert, and J. Rech, Influence of the ploughing effect on the dynamic behaviour of the self-vibratory drilling head, CIRP Annals-Manufacturing Technology, vol.57, issue.1, pp.385-388, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00275441

H. Paris and J. Rech, Perçage vibratoire autoentretenu. Les Techniques de l'Ingénieur, bm7089, pp.0-13, 2010.

O. Pecat and E. Brinksmeier, Low Damage Drilling of CFRP/Titanium Compound Materials for Fastening, Procedia CIRP, vol.13, pp.1-7, 2014.

O. Pecat and E. Brinksmeier, Tool wear analysis in low frequency vibration assisted drilling of CFRP/Ti6Al4V stack material, Procedia CIRP, vol.14, pp.142-147, 2014.

O. Pecat and I. Meyer, Low Frequency Vibration Assisted Drilling of Aluminium Alloys, WGP-Jahreskongress, pp.131-138, 2013.

G. Peigné, Etude et simulation des effets dynamiques de la coupe sur la stabilité de la coupe et la qualité géométrique de la surface usinée : application au fraisage de profil, 2003.

G. Peigné, Roulement à bague, à déplacement axial et outillage de façonnage équipé d'un tel roulement, pp.2902848-2902849, 2006.

A. Poutord, F. Rossi, G. Poulachon, R. Saoubi, and G. Abrivard, Study of the local forces along a drill edge -comparison of two methodologies. 21ème Congrès Français de la Mécanique, pp.1-6, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00866074

J. Pujana, A. Rivero, A. Celaya, and L. N. Lopez-de-lacalle, Analysis of ultrasonic-assisted drilling of Ti6Al4V, International Journal of Machine Tools and Manufacture, vol.49, issue.6, pp.500-508, 2009.

P. Rabate, G. F. Moraru, B. Picard, and D. , Dispositif de perçage à vibrations axiales autoentretenues, pp.2901163-2901164, 2006.

C. Rabreau, D. Tlalolini, M. Ritou, L. Loch, S. Furet et al., Experimental Investigation of the Dynamic Behavior of High Speed Machining Spindles with an Electromagnetic Excitation Device, 8th International Conference on Leading Edge Manufacturing in 21st Century. Kyoto, pp.18-22, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01819024

M. Roudgé, Modélisation expérimentale par les réseaux de neurones du perçage multimatériaux, 2011.

A. Sadek, M. H. Attia, M. Meshreki, and B. Shi, Characterization and optimization of vibrationassisted drilling of fibre reinforced epoxy laminates, CIRP Annals-Manufacturing Technology, vol.62, issue.1, pp.91-94, 2013.

. Sandvik-coromant, Perçage. Les Techniques de l'Ingénieur, bm7088, pp.0-20, 2001.

. Sandvik-coromant, Savoir-faire en perçage. Sandvik-Coromant Web site, 2014.

S. Schur, Mit axialem Pulsieren zu höherem Vorschub, WB Werkstatt + Betrieb, issue.0, pp.0-3, 2008.

. Seco-tools, Bienvenue dans la gamme Holemaking. Catalogue Produits SECO-Tools, pp.1-499, 2013.

S. Seguy, T. Insperger, L. Arnaud, G. Dessein, and G. Peigné, On the stability of high-speed milling with spindle speed variation, International Journal of Advanced Manufacturing Technology, vol.48, pp.883-895, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00750722

S. Tichkiewitch, G. F. Moraru, D. Brun-picard, and A. M. Gouskov, Self-Excited Vibration Drilling Models and Experiments, CIRP Annals -Manufacturing Technology, vol.51, issue.1, pp.311-314, 2002.

H. Toews, W. Compton, and S. Chandrasekar, A Study of the Influence of Superimposed Low-Frequency Modulation on the Drilling Process. Precision Engineering, vol.22, pp.1-9, 1998.

S. Wiriyacosol and E. J. Armarego, Thrust and Torque Prediction in Drilling From a Cutting Mechanics Approach, CIRP Annals-Manufacturing Technology, pp.87-91, 1979.

J. A. Yang, V. Jaganathan, and R. Du, A new dynamic model for drilling and reaming processes, International Journal of Machine Tools and Manufacture, vol.42, issue.2, pp.299-311, 2002.

S. Yaqub, Proposition d'une démarche pour identifier les efforts de coupe en présence de talonnage, Ecole Nationale Supérieure d'Arts et Métiers, 2011.

D. Zhang and L. Wang, Investigation of chip in vibration drilling, International Journal of Machine Tools and Manufacture, vol.38, issue.3, pp.165-176, 1998.

, Annexe 1 : Capabilité de la platine de mesure d'effort axial