J. Mark and . Mendell, Indoor residential chemical emissions as risk factors for respiratory and allergic effects in children: a review, Indoor air, vol.17, issue.4, pp.259-277, 2007.

F. Pacheco-torgal, S. Jalali, and A. Fucic, Toxicity of building materials, 2012.

C. Yu and D. Crump, A review of the emission of vocs from polymeric materials used in buildings, Building and Environment, vol.33, issue.6, pp.357-374, 1998.

. Hp-abeysinghe, G. Edwards, G. J. Pritchard, and . Swampillai, Degradation of crosslinked resins in water and electrolyte solutions, Polymer, vol.23, issue.12, pp.1785-1790, 1982.

A. Apicella, . Migliaresi, . Nicolais, S. Iaccarino, and . Roccotelli, The water ageing of unsaturated polyester-based composites: influence of resin chemical structure, Composites, vol.14, issue.4, pp.387-392, 1983.

M. Bakar and . Djaider, Effect of plasticizers content on the mechanical properties of unsaturated polyester resin, Journal of Thermoplastic Composite Materials, vol.20, issue.1, pp.53-64, 2007.

H. Tsuji, Hydrolytic degradation. Poly (Lactic Acid) Synthesis, Structures, Properties, Processing, and Applications, pp.343-381, 2010.

D. William and . Nix, Mechanical properties of thin films, Metallurgical transactions A, vol.20, issue.11, p.2217, 1989.

. Ma-haque and . Saif, A review of mems-based microscale and nanoscale tensile and bending testing, Experimental mechanics, vol.43, issue.3, pp.248-255, 2003.

. Vt-srikar and . Spearing, A critical review of microscale mechanical testing methods used in the design of microelectromechanical systems, Experimental mechanics, vol.43, issue.3, pp.238-247, 2003.

H. D. Maria-f-pantano, L. Espinosa, and . Pagnotta, Mechanical characterization of materials at small length scales, Journal of Mechanical Science and technology, vol.26, issue.2, pp.545-561, 2012.

X. Colin and . Verdu, Humid ageing of organic matrix composites, Durability of composites in a marine environment, pp.47-114, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02625990

J. Pascault, H. Sautereau, J. Verdu, and R. Williams, Thermosetting polymers, vol.477, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00870591

. Mj-mullins, H. Liu, and . Sue, Mechanical properties of thermosets, Thermosets, pp.28-61, 2012.

M. Biron, Thermosets and composites: material selection, applications, manufacturing and cost analysis, 2013.

H. Robert-nobbs, The physics of glassy polymers, 2012.

X. Morelle, Mechanical characterization and physics-based modeling of highly-crosslinked epoxy resin, 2015.

A. J. Kinloch, Fracture behaviour of polymers, 2013.

. Rd-maksimov, J. O. Ez-plume, and . Jansons, Comparative studies on the mechanical properties of a thermoset polymer in tension and compression, Mechanics of Composite Materials, vol.41, issue.5, pp.425-436, 2005.

S. Robert and . Hoy, Why is understanding glassy polymer mechanics so difficult, Journal of Polymer Science Part B: Polymer Physics, vol.49, issue.14, pp.979-984, 2011.

E. James and . Mark, Physical properties of polymers handbook, vol.1076, 2007.

D. Wayne, A. E. Cook, G. Mayr, and . Edward, Yielding behaviour in model epoxy thermosets-ii. temperature dependence, Polymer, vol.39, issue.16, pp.3725-3733, 1998.

J. Richeton, . Ahzi, . Vecchio, R. R. Jiang, and . Adharapurapu, Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: characterization and modeling of the compressive yield stress. International journal of solids and structures, vol.43, pp.2318-2335, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00096988

. Ad-mulliken and . Boyce, Mechanics of the rate-dependent elastic-plastic deformation of glassy polymers from low to high strain rates, International journal of solids and structures, vol.43, issue.5, pp.1331-1356, 2006.

P. Gac, M. Arhant, M. L. Gall, and P. Davies, Yield stress changes induced by water in polyamide 6: Characterization and modeling, Polymer Degradation and Stability, vol.137, pp.272-280, 2017.

H. Eyring, Viscosity, plasticity, and diffusion as examples of absolute reaction rates, The Journal of chemical physics, vol.4, issue.4, pp.283-291, 1936.

. Richard-e-robertson, Theory for the plasticity of glassy polymers, The Journal of Chemical Physics, vol.44, issue.10, pp.3950-3956, 1966.

. As-argon, A theory for the low-temperature plastic deformation of glassy polymers, Philosophical Magazine, vol.28, issue.4, pp.839-865, 1973.

L. E. Hgh-van-melick, H. Govaert, and . Meijer, On the origin of strain hardening in glassy polymers, Polymer, vol.44, issue.8, pp.2493-2502, 2003.

S. Robert, . Hoy, O. Mark, and . Robbins, Strain hardening of polymer glasses: effect of entanglement density, temperature, and rate, Journal of Polymer Science Part B: Polymer Physics, vol.44, issue.24, pp.3487-3500, 2006.

. Dja-senden, L. E. Van-dommelen, and . Govaert, Strain hardening and its relation to bauschinger effects in oriented polymers, Journal of Polymer Science Part B: Polymer Physics, vol.48, issue.13, pp.1483-1494, 2010.

S. Robert, . Hoy, O. Mark, and . Robbins, Strain hardening in polymer glasses: limitations of network models, Physical review letters, vol.99, issue.11, p.117801, 2007.

T. Hobbiebrunken, B. Fiedler, M. Hojo, and M. Tanaka, Experimental determination of the true epoxy resin strength using micro-scaled specimens, Composites Part A: Applied Science and Manufacturing, vol.38, issue.3, pp.814-818, 2007.

J. Louis-halary, F. Lauprêtre, and L. Monnerie, Polymer materials: macroscopic properties and molecular interpretations, 2011.

. Lawrence-e-nielsen, Cross-linking-effect on physical properties of polymers, Journal of Macromolecular Science, Part C, vol.3, issue.1, pp.69-103, 1969.

A. Bandyopadhyay, K. Pavan, . Valavala, C. Thomas, K. E. Clancy et al., Molecular modeling of crosslinked epoxy polymers: The effect of crosslink density on thermomechanical properties, Polymer, vol.52, issue.11, pp.2445-2452, 2011.

J. Paul, J. Flory, and . Rehner, Statistical mechanics of cross-linked polymer networks i. rubberlike elasticity. The journal of chemical physics, vol.11, pp.512-520, 1943.

M. Ogata, N. Kinjo, and T. Kawata, Effects of crosslinking on physical properties of phenol-formaldehyde novolac cured epoxy resins, Journal of applied polymer science, vol.48, issue.4, pp.583-601, 1993.

. Lce-struik, Physical aging in amorphous polymers and other materials, 1977.

M. John and . Hutchinson, Physical aging of polymers, Progress in Polymer Science, vol.20, issue.4, pp.703-760, 1995.

V. Angela, A. J. Cugini, and . Lesser, Aspects of physical aging, mechanical rejuvenation, and thermal annealing in a new copolyester, Polymer Engineering & Science, vol.55, issue.8, pp.1941-1950, 2015.

L. E. Hgh-van-melick, . Govaert, . Raas, H. Wj-nauta, and . Meijer, Kinetics of ageing and re-embrittlement of mechanically rejuvenated polystyrene, Polymer, vol.44, issue.4, pp.1171-1179, 2003.

G. Wypych, Handbook of plasticizers, 2004.

. E-lee-mckague, D. Jack, J. E. Reynolds, and . Halkias, Swelling and glass transition relations for epoxy matrix material in humid environments, Journal of Applied Polymer Science, vol.22, issue.6, pp.1643-1654, 1978.

S. Masoumi and H. Valipour, Effects of moisture exposure on the crosslinked epoxy system: an atomistic study. Modelling and Simulation in, Materials Science and Engineering, vol.24, issue.3, p.35011, 2016.

G. Bouvet, . Cohendoz, . Feaugas, S. Touzain, and . Mallarino, Microstructural reorganization in model epoxy network during cyclic hygrothermal ageing, Polymer, vol.122, pp.1-11, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02479648

J. Zhou and J. Lucas, Hygrothermal effects of epoxy resin. part i: the nature of water in epoxy, Polymer, vol.40, issue.20, pp.5505-5512, 1999.

M. Bocqué, C. Voirin, V. Lapinte, S. Caillol, and J. Robin, Petro-based and bio-based plasticizers: Chemical structures to plasticizing properties, Journal of Polymer Science Part A: Polymer Chemistry, vol.54, issue.1, pp.11-33, 2016.

T. Mekonnen, P. Mussone, H. Khalil, and D. Bressler, Progress in bio-based plastics and plasticizing modifications, Journal of Materials Chemistry A, vol.1, issue.43, pp.13379-13398, 2013.

G. Dlubek, R. Redmann, and . Krause-rehberg, Humidity-induced plasticization and antiplasticization of polyamide 6: A positron lifetime study of the local free volume, Journal of Applied Polymer Science, vol.84, issue.2, pp.244-255, 2002.

E. Parodi, W. M. Gerrit, L. E. Peters, and . Govaert, Prediction of plasticity-controlled failure in polyamide 6: Influence of temperature and relative humidity, Journal of Applied Polymer Science, vol.135, issue.11, p.45942, 2018.

. Rm-hodge, . Bastow, . Edward, A. J. Simon, and . Hill, Free volume and the mechanism of plasticization in water-swollen poly (vinyl alcohol). Macromolecules, vol.29, pp.8137-8143, 1996.

. Mv-konidari, M. Papadokostaki, and . Sanopoulou, Moisture-induced effects on the tensile mechanical properties and glass-transition temperature of poly (vinyl alcohol) films, Journal of applied polymer science, vol.120, issue.6, pp.3381-3386, 2011.

J. Zhou and J. Lucas, Hygrothermal effects of epoxy resin, Polymer, vol.40, issue.20, pp.5513-5522, 1999.

A. Apicella, C. Tessieri, and . Cataldis, Sorption modes of water in glassy epoxies, Journal of Membrane Science, vol.18, pp.211-225, 1984.

. Zh-ping, . Nguyen, . Chen, Y. D. Zhou, and . Ding, States of water in different hydrophilic polymers-dsc and ftir studies, Polymer, vol.42, issue.20, pp.8461-8467, 2001.

Y. Sekine and T. Ikeda-fukazawa, Structural changes of water in a hydrogel during dehydration, The Journal of chemical physics, vol.130, issue.3, p.34501, 2009.

S. Cotugno, G. Larobina, P. Mensitieri, G. Musto, and . Ragosta, A novel spectroscopic approach to investigate transport processes in polymers: the case of water-epoxy system, Polymer, vol.42, issue.15, pp.6431-6438, 2001.

S. Mali, S. Lyssasetsuko, F. Sakanaka, M. Yamashita, and . Grossmann, Water sorption and mechanical properties of cassava starch films and their relation to plasticizing effect, Carbohydrate Polymers, vol.60, issue.3, pp.283-289, 2005.

. Yp-chang, C. C. Cheah, and . Seow, Plasticizing-antiplasticizing effects of water on physical properties of tapioca starch films in the glassy state, Journal of Food Science, vol.65, issue.3, pp.445-451, 2000.

S. Ito, M. Hashimoto, B. Wadgaonkar, N. Svizero, R. M. Carvalho et al., Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity, Biomaterials, vol.26, issue.33, pp.6449-6459, 2005.

P. Nogueira, . Ramirez, . Torres, . Mj-abad, J. Cano et al., Effect of water sorption on the structure and mechanical properties of an epoxy resin system, Journal of Applied Polymer Science, vol.80, issue.1, pp.71-80, 2001.

H. Hu, X. Zhang, Y. He, J. Zhan-sheng-guo, Y. Zhang et al., Combined effect of relative humidity and temperature on dynamic viscoelastic properties and glass transition of poly (vinyl alcohol), Journal of Applied Polymer Science, vol.130, issue.5, pp.3161-3167, 2013.

M. Annaka, T. Matsuura, S. Maruoka, and N. Ogata, Dehydration and vitrification of corneal gel, Soft Matter, vol.8, issue.31, pp.8157-8163, 2012.

M. Ilyas, Y. Md-anamul-haque, T. Yue, and . Kurokawa, Tasuku Nakajima, Takayuki Nonoyama, and Jian Ping Gong. Water-triggered ductile-brittle transition of anisotropic lamellar hydrogels and effect of confinement on polymer dynamics, Macromolecules, vol.50, issue.20, pp.8169-8177, 2017.

L. Slade and H. Levine, Glass transitions and water-food structure interactions, Advances in food and nutrition research, vol.38, pp.103-269, 1995.

C. Bruno, G. Hancock, and . Zografi, The relationship between the glass transition temperature and the water content of amorphous pharmaceutical solids, Pharmaceutical research, vol.11, issue.4, pp.471-477, 1994.

Y. Liu, Y. Li, G. Yang, X. Zheng, and S. Zhou, Multistimulus-responsive shape-memory polymer nanocomposite network cross-linked by cellulose nanocrystals, ACS applied materials & interfaces, vol.7, issue.7, pp.4118-4126, 2015.

W. M. Huang, Y. Yang, Z. Zhao, and . Ding, Thermo-moisture responsive polyurethane shape-memory polymer and composites: a review, Journal of materials chemistry, vol.20, issue.17, pp.3367-3381, 2010.

L. Bao, A. F. Yee, and C. Lee, Moisture absorption and hygrothermal aging in a bismaleimide resin, polymer, vol.42, issue.17, pp.7327-7333, 2001.

D. Champion, C. Loupiac, D. Simatos, P. Lillford, and P. Cayot, Structural relaxation during drying and rehydration of food materials-the water effect and the origin of hysteresis, Food biophysics, vol.6, issue.1, pp.160-169, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02371287

T. C. Wong and . Broutman, Moisture diffusion in epoxy resins part i. non-fickian sorption processes, Polymer Engineering & Science, vol.25, issue.9, pp.521-528, 1985.

M. Eric, M. Davis, M. G. Minelli, Y. Baschetti, and . Elabd, Non-fickian diffusion of water in polylactide, Industrial & Engineering Chemistry Research, vol.52, issue.26, pp.8664-8673, 2012.

T. Cui, S. A. Verberne, and . Meguid, Characterization and atomistic modeling of the effect of water absorption on the mechanical properties of thermoset polymers, Acta Mechanica, vol.229, issue.2, pp.745-761, 2018.

A. Yp-chang, C. C. Karim, and . Seow, Interactive plasticizing-antiplasticizing effects of water and glycerol on the tensile properties of tapioca starch films, Food Hydrocolloids, vol.20, issue.1, pp.1-8, 2006.

. Cc-seow, Y. P. Cheah, and . Chang, Antiplasticization by water in reducedmoisture food systems, Journal of food science, vol.64, issue.4, pp.576-581, 1999.

P. Pittia and G. Sacchetti, Antiplasticization effect of water in amorphous foods. a review, Food Chemistry, vol.106, issue.4, pp.1417-1427, 2008.

J. Wj and J. R. Caldwell, Antiplasticization. ii. characteristics of antiplasticizers, Journal of Applied Polymer Science, vol.11, issue.2, pp.211-226, 1967.

. D-lourdin, P. Bizot, and . Colonna, antiplasticization" in starch-glycerol films, Journal of Applied Polymer Science, vol.63, issue.8, pp.1047-1053, 1997.

Y. Zhang and J. H. Han, Crystallization of high-amylose starch by the addition of plasticizers at low and intermediate concentrations, Journal of food science, vol.75, issue.1, pp.8-16, 2010.

J. Kevin, A. Calzia, A. J. Forcum, and . Lesser, Comparing reinforcement strategies for epoxy networks using reactive and non-reactive fortifiers, Journal of applied polymer science, vol.102, issue.5, pp.4606-4615, 2006.

. Js-vrentas, . Duda, and . Ling, Antiplasticization and volumetric behavior in glassy polymers, Macromolecules, vol.21, issue.5, pp.1470-1475, 1988.

M. Roussenova, M. Murith, A. Alam, and J. Ubbink, Plasticization, antiplasticization, and molecular packing in amorphous carbohydrateglycerol matrices, Biomacromolecules, vol.11, issue.12, pp.3237-3247, 2010.

I. Ghorbel and . Valentin, Hydrothermal effects on the physico-chemical properties of pure and glass fiber reinforced polyester and vinylester resins, Polymer Composites, vol.14, issue.4, pp.324-334, 1993.

M. Partini and R. Pantani, Ftir analysis of hydrolysis in aliphatic polyesters, Polymer degradation and stability, vol.92, issue.8, pp.1491-1497, 2007.

P. Gac and B. Fayolle, Impact of fillers (short glass fibers and rubber) on the hydrolysis-induced embrittlement of polyamide 6.6, Composites Part B: Engineering, vol.153, pp.256-263, 2018.

G. Z. Xiao and . Shanahan, Irreversible effects of hygrothermal aging on dgeba/dda epoxy resin, Journal of applied polymer science, vol.69, issue.2, pp.363-369, 1998.

D. Kockott, Natural and artificial weathering of polymers, vol.25, pp.181-208, 1989.

S. Zervos, ?. ????????, and . Z???ó?, Natural and accelerated ageing of cellulose and paper, 2015.

J. Verdu, Action de l'eau sur les plastiques, 2000.

H. Kim and H. Kim, Enhanced hydrolysis resistance of biodegradable polymers and bio-composites, Polymer Degradation and Stability, vol.93, issue.8, pp.1544-1553, 2008.

E. Kollia, T. Loutas, . Fiamegkou, V. Vavouliotis, and . Kostopoulos, Degradation behavior of glass fiber reinforced cyanate ester composites under hydrothermal ageing, Polymer Degradation and Stability, vol.121, pp.200-207, 2015.

P. Timothy, J. Ferguson, and . Qu, Elastic modulus variation due to moisture absorption and permanent changes upon redrying in an epoxy based underfill, IEEE Transactions on Components and Packaging Technologies, vol.29, issue.1, pp.105-111, 2006.

A. Boubakri, . Elleuch, and . Guermazi, Investigations on hygrothermal aging of thermoplastic polyurethane material, Materials & Design, vol.30, issue.10, pp.3958-3965, 2009.

F. C. Khg-ashbee, . Frank, and . Wyatt, Water damage in polyester resins, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, vol.300, pp.415-419, 1463.

L. Gautier, . Mortaigne, J. Bellenger, and . Verdu, Osmotic cracking nucleation in hydrothermal-aged polyester matrix, Polymer, vol.41, issue.7, pp.2481-2490, 2000.

M. H. Shirangi and . Michel, Mechanism of moisture diffusion, hygroscopic swelling, and adhesion degradation in epoxy molding compounds, Moisture sensitivity of plastic packages of IC Devices, pp.29-69, 2010.

L. Friederike-von-burkersroda, A. Schedl, and . Göpferich, Why degradable polymers undergo surface erosion or bulk erosion, Biomaterials, vol.23, issue.21, pp.4221-4231, 2002.

M. Anders, T. Lo, S. R. Centea, and . Nutt, Eliminating volatile-induced surface porosity during resin transfer molding of a benzoxazine/epoxy blend, Composites Part A: Applied Science and Manufacturing, vol.84, pp.442-454, 2016.

J. Lo, . Anders, S. R. Centea, and . Nutt, The effect of process parameters on volatile release for a benzoxazine-epoxy rtm resin, Composites Part A: Applied Science and Manufacturing, vol.84, pp.326-335, 2016.

C. Pupin, A. Ross, C. Dubois, J. Rietsch, N. Vernet et al., Formation and suppression of volatile-induced porosities in an rtm epoxy resin, Composites Part A: Applied Science and Manufacturing, vol.94, pp.146-157, 2017.

, Technical report sgr/pcrs -ms/sr -n°0239/13

M. Bo-mikkelsen, A. Alban, E. Letailleur, E. Søndergård, J. Barthel et al., All-silica nanofluidic devices for dna-analysis fabricated by imprint of sol-gel silica with silicon stamp, Lab on a Chip, vol.12, issue.2, pp.262-267, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00642053

Y. Xia, M. George, and . Whitesides, Soft lithography, Angewandte Chemie International Edition, vol.37, issue.5, pp.550-575, 1998.

C. Mcdonald, C. David, J. R. Duffy, . Anderson, T. Daniel et al., Fabrication of microfluidic systems in poly (dimethylsiloxane), ELECTROPHORESIS: An International Journal, vol.21, issue.1, pp.27-40, 2000.

. Tc-merkel, . Bondar, . Nagai, I. Bd-freeman, and . Pinnau, Gas sorption, diffusion, and permeation in poly (dimethylsiloxane), Journal of Polymer Science Part B: Polymer Physics, vol.38, issue.3, pp.415-434, 2000.

A. Del, C. , and C. Greiner, Su-8: a photoresist for high-aspectratio and 3d submicron lithography, Journal of micromechanics and microengineering, vol.17, issue.6, p.81, 2007.

P. Elzière, Laminated glass: dynamic rupture of adhesion, 2016.

H. Yoon, H. Lee, and W. Lee, Toward residual-layer-free nanoimprint lithography in large-area fabrication, Korea-Australia Rheology Journal, vol.26, issue.1, pp.39-48, 2014.

D. Michael, . Uchic, M. Dennis, and . Dimiduk, A methodology to investigate size scale effects in crystalline plasticity using uniaxial compression testing, Materials Science and Engineering: A, vol.400, pp.268-278, 2005.

H. Bei, S. Shim, P. Easo, . George, K. Michael et al., Compressive strengths of molybdenum alloy micropillars prepared using a new technique, Scripta Materialia, vol.57, issue.5, pp.397-400, 2007.

R. Lacroix, V. Chomienne, G. Kermouche, J. Teisseire, E. Barthel et al., Micropillar testing of amorphous silica, International Journal of Applied Glass Science, vol.3, issue.1, pp.36-43, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00677258

G. Kermouche, . Guillonneau, . Michler, E. Teisseire, and . Barthel, Perfectly plastic flow in silica glass, Acta Materialia, vol.114, pp.146-153, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01393682

S. Wang, . Yang, Y. Zhou, and . Mai, Size effect in microcompression of epoxy micropillars, Journal of materials science, vol.47, issue.16, pp.6047-6055, 2012.

S. Chattaraj, P. Pant, N. Dnyanesh, H. Pawaskar, and . Nanavati, How many network chains of a densely crosslinked glassy thermoset deform cooperatively at yield? Polymer, vol.82, pp.305-318, 2016.

T. Xu, S. Jun-hyeon-yoo, S. Babu, J. Roy, H. Lee et al., Characterization of the mechanical behavior of su-8 at microscale by viscoelastic analysis, Journal of Micromechanics and Microengineering, vol.26, issue.10, p.105001, 2016.

S. Thimmappa-shetty-guruprasad, S. Bhattacharya, and . Basu, Size effect in microcompression of polystyrene micropillars, Polymer, vol.98, pp.118-128, 2016.

E. Anthony, W. D. Mayr, G. Cook, and . Edward, Yielding behaviour in model epoxy thermosets-i. effect of strain rate and composition, Polymer, vol.39, issue.16, pp.3719-3724, 1998.

P. Colomban, R. Herrera-ramirez, A. Paquin, A. Marcellan, and . Bunsell, Micro-raman study of the fatigue and fracture behaviour of single pa66 fibres: Comparison with single pet and pp fibres, Engineering fracture mechanics, vol.73, issue.16, pp.2463-2475, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00120388

. Eps-tan, C. T. Sy-ng, and . Lim, Tensile testing of a single ultrafine polymeric fiber, Biomaterials, vol.26, issue.13, pp.1453-1456, 2005.

C. Malhaire, C. Seguineau, M. Ignat, C. Josserond, L. Debove et al., Experimental setup and realization of thin film specimens for microtensile tests, Review of Scientific Instruments, vol.80, issue.2, p.23901, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00437164

Y. Yang, . Ye, . Lu, P. K. Liu, and . Liaw, Effects of specimen geometry and base material on the mechanical behavior of focused-ion-beam-fabricated metallic-glass micropillars, Acta Materialia, vol.57, issue.5, pp.1613-1623, 2009.

F. Doumenc, B. Bodiguel, and . Guerrier, Physical aging of glassy pmma/toluene films: Influence of drying/swelling history, The European Physical Journal E, vol.27, issue.1, pp.3-11, 2008.

M. Chen, B. Coasne, R. Guyer, D. Derome, and J. Carmeliet, Role of hydrogen bonding in hysteresis observed in sorption-induced swelling of soft nanoporous polymers, Nature communications, vol.9, issue.1, p.3507, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01898347

B. Yang, W. M. Huang, C. Li, L. Lee, and . Li, On the effects of moisture in a polyurethane shape memory polymer. Smart materials and structures, vol.13, p.191, 2003.

C. Bauwens-crowet, J. Bauwens, and G. Homes, The temperature dependence of yield of polycarbonate in uniaxial compression and tensile tests, Journal of Materials Science, vol.7, issue.2, pp.176-183, 1972.

J. Paul and . Flory, Network structure and the elastic properties of vulcanized rubber, Chemical reviews, vol.35, issue.1, pp.51-75, 1944.

Y. Dan and . Perera, Physical ageing of organic coatings, Progress in organic coatings, vol.47, issue.1, pp.61-76, 2003.

Y. Dan, P. Perera, and . Schutyser, Effect of physical aging on thermal stress development in powder coatings, Progress in organic coatings, vol.24, issue.1-4, pp.299-307, 1994.

Y. Dan and . Perera, Effect of thermal and hygroscopic history on physical ageing of organic coatings, Progress in Organic Coatings, vol.44, issue.1, pp.55-62, 2002.

J. Thurn and T. Hermel-davidock, Thermal stress hysteresis and stress relaxation in an epoxy film, Journal of materials science, vol.42, issue.14, pp.5686-5691, 2007.

. Fa-kandil, . Lord, P. V. Fry, and . Grant, A review of residual stress measurement methods. A Guide to Technique Selection, NPL, p.4, 2001.

G. Abadias, E. Chason, J. Keckes, M. Sebastiani, B. Gregory et al., Stress in thin films and coatings: Current status, challenges, and prospects, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.36, issue.2, p.20801, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01942286

A. F. Abdelkader and . White, Curing characteristics and internal stresses in epoxy coatings: effect of crosslinking agent, Journal of materials science, vol.40, issue.8, pp.1843-1854, 2005.

S. Singamaneni, E. Michael, . Mcconney, C. Melburne, H. Lemieux et al., Polymer-silicon flexible structures for fast chemical vapor detection, Advanced materials, vol.19, issue.23, pp.4248-4255, 2007.

S. Brian, . Berry, C. Walter, and . Pritchet, Bending-cantilever method for the study of moisture swelling in polymers, IBM journal of research and development, vol.28, issue.6, pp.662-667, 1984.

. Eh-wong, . Rajoo, T. B. Sw-koh, and . Lim, The mechanics and impact of hygroscopic swelling of polymeric materials in electronic packaging, Journal of Electronic Packaging, vol.124, issue.2, pp.122-126, 2002.

L. James, J. Langer, D. Economy, and . Cahill, Absorption of water and mechanical stress in immobilized poly (vinylbenzyltrialkylammonium chloride) thin films, Macromolecules, vol.45, issue.7, pp.3205-3212, 2012.

H. Lei, . Payne, . Mccormick, . Francis, L. E. Gerberich et al., Stress development in drying coatings, Journal of Applied Polymer Science, vol.81, issue.4, pp.1000-1013, 2001.

. Lf-francis, . Mccormick, J. A. Vaessen, and . Payne, Development and measurement of stress in polymer coatings, Journal of Materials Science, vol.37, issue.22, pp.4717-4731, 2002.

H. M. Tong and . Saenger, Bending-beam study of water sorption by thin poly (methyl methacrylate) films, Journal of applied polymer science, vol.38, issue.5, pp.937-950, 1989.

G. G. Stoney, The tension of metallic films deposited by electrolysis, Proc. R. Soc. Lond. A, vol.82, pp.172-175, 1909.

. Jason-a-payne, V. Alon, L. F. Mccormick, and . Francis, In situ stress measurement apparatus for liquid applied coatings, Review of scientific instruments, vol.68, issue.12, pp.4564-4568, 1997.

R. Katherine, U. Thomas, and . Steiner, Direct stress measurements in thin polymer films, Soft Matter, vol.7, issue.17, pp.7839-7842, 2011.

J. J. Wortman and . Evans, Young's modulus, shear modulus, and poisson's ratio in silicon and germanium, Journal of applied physics, vol.36, issue.1, pp.153-156, 1965.

J. Clenet, , 2018.