Discrimination of dynamically and post-dynamically recrystallized grains based on EBSD data : application to Inconel 718, Journal of Microscopy, vol.273, pp.135-147, 2018. ,
Influence of strain rate on subsolvus dynamic and post-dynamic recrystallization kinetics of Inconel 718, Acta Materialia, vol.174, pp.406-417, 2019. ,
Metallurgical analysis of direct aging effect on tensile and creep properties in Inconel 718 forgings, Proceedings of Superalloys 2020 : 14th International Symposium on Superalloys ,
, -Les résultats concernant l'influence du chauffage par effet Joule sur les évolutions microstructurales présentés au chapitre 5 seront prochainement synthétisés sous la forme d'un article
Lissage de cartographies EBSD pour quantifier la densité de dislocations géométriquement nécessaires -Application à la différenciation de différents types de grains recristallisés dans l'Inconel R 718, La métallurgie, Metallurgical analysis of direct aging effect on tensile and creep properties in Inconel 718 forgings, Superalloys 2020 : 14th International Symposium on Superalloys, vol.718, pp.21-23, 2017. ,
Current and emerging opportunities in titanium's expanding market, JOM Journal of the Minerals, Metals and Materials Society, vol.59, issue.6, pp.27-27, 2007. ,
Application of alloy 718 in GE aircraft engines : past, present and next five years, pp.1-11, 2001. ,
On some advanced nickel-based superalloys for disk applications, AerospaceLab, issue.3, pp.1-9, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-01183624
Metallurgy of a columbium-hardened nickel-chromium-iron alloy, pp.28-39, 1965. ,
Evolution of ? phase microstructure in alloy 718, Proceedings of the 7 th International Symposium Superalloys 718 & Derivatives, pp.737-750, 2010. ,
Hot deformation and recrystallization of Inconel 718, Formability and Metallurgical Structure, pp.305-325, 1986. ,
Détermination des lois d'évolution microstructurale de l'alliage 718 lors du matriçage, 2003. ,
Microstructural characteristics of forged and heat treated Inconel-718 disks, Materials and Design, vol.52, pp.791-800, 2013. ,
Microstructure and mechanical properties evolutions of alloy 718 during isothermal and thermal cycling over-aging, Materials and Design, vol.102, pp.284-296, 2016. ,
Precipitation in nickel-base alloy 718, Transactions of the ASM, vol.62, pp.611-622, 1969. ,
Crack initiation sensitivity of wrought direct aged alloy 718 in the very high cycle fatigue regime : the role of non-metallic inclusions, Materials Science and Engineering : A, vol.678, pp.122-136, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01662609
Microstructural features controlling the variability in low-cycle fatigue properties of alloy Inconel 718DA at intermediate temperature, Metallurgical and Materials Transactions A, vol.47, issue.3, pp.1096-1109, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01644848
High temperature deformation behavior of solid and semi-solid alloy 718, Acta Materialia, vol.47, issue.18, pp.4695-4710, 1999. ,
Inconel 718 single and multipass modelling of hot forging, Superalloys 2012 : 12 th international symposium on superalloys, pp.663-672, 2012. ,
URL : https://hal.archives-ouvertes.fr/hal-01349293
TTT diagram of a newly developed nickel-base superalloy-Allvac R 718plus TM, TMS, pp.193-202, 2005. ,
Heat treatment : structure and properties of nonferrous alloys, 1982. ,
Microstructural evolutions during thermal aging of alloy 625 : impact of temperature and forming process, Metallurgical and materials transactions A, vol.45, issue.7, pp.2963-2982, 2014. ,
Some features of anisothermal solid-state transformations in alloy 718, Materials Characterization, vol.61, issue.5, pp.525-534, 2010. ,
Contribution à l'étude de la précipitation des phases intermétalliques dans l'alliage 718, 2010. ,
The deformation and ageing of mild steel : III discussion of results, Proceedings of the Physical Society. Section B, vol.64, issue.9, p.747, 1951. ,
The cleavage strength of polycrystals, Journal of the Iron and Steel Institute, vol.174, pp.22-28, 1953. ,
, , 1982.
Fatigue and creep properties in relation with alloy 718 microstructure, pp.1-11, 2001. ,
Progress in structural materials for aerospace systems, Acta Materialia, vol.51, issue.19, pp.5775-5799, 2003. ,
Microstructural characterization and elemental partitioning in a direct-aged superalloy (DA 718), Materials Science and Engineering, vol.92, pp.159-171, 1987. ,
Development of damage tolerant Inco 718 for high temperature usage, pp.509-522, 1994. ,
The effectiveness of direct aging on Inconel 718 forgings produced at high strain rates as obtained on a screw press, pp.223-228, 2001. ,
Integrated process modeling for the mechanical properties optimization of Direct Aged alloy 718 engine disks, Proceedings of 13 th International Symposium on Superalloys, pp.513-521, 2016. ,
On conventional versus direct ageing of alloy 718, Acta Materialia, vol.156, pp.116-124, 2018. ,
Recrystallization and Related Annealing Phenomena, 3 rd edition, 2017. ,
Current issues in recrystallization : a review, Materials Science and Engineering : A, vol.238, issue.2, pp.219-274, 1997. ,
A review of dynamic recrystallization phenomena in metallic materials, Materials and Design, vol.111, pp.548-574, 2016. ,
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions, Progress in Materials Science, vol.60, pp.130-207, 2014. ,
Effect of strain rate upon plastic flow of steel, Journal of Applied physics, vol.15, issue.1, pp.22-32, 1944. ,
, Physical Metallurgy, Fifth edition, ch. Recovery and Recrystallization : Phenomena, Physics, Models, Simulation, 2014.
Initiation of dynamic recrystallization under inhomogeneous stress states in pure copper, Acta Materialia, vol.47, issue.17, pp.4339-4354, 1999. ,
Dynamic recrystallization in AZ31 magnesium alloy, Materials Science and Engineering : A, vol.456, issue.1, pp.52-57, 2007. ,
Dynamic recrystallization of austenite in Ni-30 pct Fe model alloy : Microstructure and texture evolution, Metallurgical and Materials Transactions A, vol.40, issue.5, pp.1175-1189, 2009. ,
Dynamic recrystallization kinetics and microstructure evolution of an AZ91D magnesium alloy during hot compression, Materials Characterization, vol.145, pp.39-52, 2018. ,
Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 718, Materials Science and Engineering : A, vol.678, pp.137-152, 2016. ,
Microstructure evolution during dynamic recrystallization of hot deformed superalloy 718, Materials Science and Engineering : A, vol.486, issue.1-2, pp.321-332, 2008. ,
Effect of strain rate on microstructure evolution of a nickel-based superalloy during hot deformation, Materials and Design, vol.80, pp.51-62, 2015. ,
Mean field modelling of dynamic and post-dynamic recrystallization during hot deformation of Inconel 718 in the absence of ? phase particles, Materials Science and Engineering : A, vol.655, pp.408-424, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01297977
In situ characterization of Inconel 718 post-dynamic recrystallization within a scanning electron microscope, Metals, vol.7, issue.11, p.476, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01630159
The dynamic and metadynamic recrystallisation of IN718, Superalloys 718, 625, 706 and Derivatives, pp.373-383, 2005. ,
Simulation of microstructures for alloy 718 blade forging using 3D FEM simulator, Journal of Materials Processing Technology, vol.141, issue.3, pp.337-342, 2003. ,
Kinetics equations and microstructural evolution during metadynamic recrystallization in a nickel-based superalloy with ? phase, Journal of Alloys and Compounds, vol.690, pp.971-978, 2017. ,
A new method to predict the metadynamic recrystallization behavior in a typical nickel-based superalloy, Applied Physics A, vol.122, issue.6, p.601, 2016. ,
, Grain boundary migration in metals : thermodynamics, kinetics, applications, 2009.
On the zener drag, Acta Metallurgica, vol.33, issue.1, pp.11-22, 1985. ,
Microstructure and micro-texture evolution during large strain deformation of Inconel alloy IN718, Materials Characterization, vol.110, pp.236-241, 2015. ,
Flow behavior and microstructures of superalloy 718 during high temperature deformation, Materials Science and Engineering : A, vol.497, issue.1-2, pp.479-486, 2008. ,
EBSD analysis of evolution of dynamic recrystallization grains and ? phase in a nickel-based superalloy during hot compressive deformation, Materials and Design, vol.97, pp.13-24, 2016. ,
Microstructural modeling of metadynamic recrystallization in hot working of IN718 superalloy, Materials Science and Engineering : A, vol.293, issue.1-2, pp.198-207, 2000. ,
EBSD study of a hot deformed nickel-based superalloy, Journal of Alloys and Compounds, vol.640, pp.101-113, 2015. ,
Effect of starting grain size on as-deformed microstructure in high temperature deformation of alloy 718, pp.303-313, 1994. ,
Hot forging of a nickel-base superalloy, Journal of Materials Processing Technology, vol.111, pp.98-102, 2001. ,
Effects of strain rate and temperature on deformation behaviour of IN718 during high temperature deformation, Materials Science and Engineering, vol.177, issue.1-2, pp.1-9, 1994. ,
Abnormal dynamic recrystallization behavior of a nickel based superalloy during hot deformation, Journal of Alloys and Compounds, vol.787, pp.196-205, 2019. ,
Microstructural evolution and constitutive equations of Inconel 718 alloy under quasi-static and quasi-dynamic conditions, Materials and Design, vol.94, pp.28-38, 2016. ,
Correlating hot deformation parameters with microstructure evolution during thermomechanical processing of Inconel 718 alloy, Metallurgical and Materials Transactions A, vol.50, issue.10, pp.4714-4731, 2019. ,
Dynamic behavior and a modified Johnson -Cook constitutive model of Inconel 718 at high strain rate and elevated temperature, Materials Science and Engineering : A, vol.580, pp.385-390, 2013. ,
Microstructure and strength of nickel subjected to large plastic deformation at very high strain rate, Materials Science and Engineering : A, vol.662, pp.9-15, 2016. ,
Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy, Journal of Alloys and Compounds, pp.28-42, 2016. ,
A study on the effect of strain rate on the dynamic recrystallization mechanism of alloy 617B, Metallurgical and Materials Transactions A, vol.47, issue.10, pp.5071-5087, 2016. ,
Hot deformation characteristics and microstructure evolution of hastelloy C-276, Materials Science and Engineering : A, vol.712, pp.240-254, 2018. ,
Effect of strain rate on hot deformation characteristics of GH690 superalloy, Transactions of Nonferrous Metals Society of China, vol.27, issue.3, pp.538-550, 2017. ,
Effects of strain rate on the hot deformation behavior and dynamic recrystallization in china low activation martensitic steel, Fusion Engineering and Design, vol.103, pp.21-30, 2016. ,
Role of twinning on dynamic recrystallization and microstructure during moderate to high strain rate hot deformation of a Ti-modified austenitic stainless steel, Metallurgical and Materials Transactions A, vol.43, issue.6, pp.2056-2068, 2012. ,
An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel-chromium alloy (800H) during hot deformation, Materials Science and Engineering : A, vol.585, pp.71-85, 2013. ,
Effects of strain rates and twins evolution on dynamic recrystallization mechanisms of austenite stainless steel, Materials Science and Engineering : A, vol.761, p.138044, 2019. ,
Controlling grain size via dynamic recrystallization in an advanced polycrystalline nickel base superalloy, Journal of Alloys and Compounds, vol.701, pp.909-919, 2017. ,
,
Theory of electron backscattering from crystals, Physical Review B, vol.51, issue.6, p.3397, 1995. ,
Grain detection from 2D and 3D EBSD data-specification of the MTEX algorithm, Ultramicroscopy, vol.111, issue.12, pp.1720-1733, 2011. ,
Statistical analysis of dislocations and dislocation boundaries from EBSD data, Ultramicroscopy, vol.179, pp.63-72, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01509485
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD, Materials Science and Engineering : A, vol.527, issue.10, pp.2738-2746, 2010. ,
Estimation of geometrically necessary dislocation density from filtered EBSD data by a local linear adaptation of smoothing splines, Journal of Applied Crystallography, 2019. ,
URL : https://hal.archives-ouvertes.fr/hal-02126125
Differentiation of ? and ? precipitates in Inconel 718 by a complementary study with small-angle neutron scattering and analytical microscopy, Acta Materialia, vol.163, pp.28-39, 2019. ,
Electron channeling patterns in the scanning electron microscope, Journal of Applied Physics, vol.53, issue.8, pp.81-122, 1982. ,
Theory and application of electron channelling contrast imaging under controlled diffraction conditions, Acta Materialia, vol.75, pp.20-50, 2014. ,
, Heat treatment : structure and properties of nonferrous alloys. Butterworths, 1966.
Electron channelling patterns in scanning electron microscopy, Journal of Materials Science, vol.12, issue.6, pp.1071-1087, 1977. ,
Caractérisation des défauts cristallins au MEB par canalisation d'électrons assistée par diagrammes pseudo-Kikuchi haute résolution : Application à l'acier IF, UO 2 et TiAl, 2016. ,
Demonstration of the g· bxu= 0 edge dislocation invisibility criterion for electron channelling contrast imaging, Philosophical magazine letters, vol.81, issue.12, pp.833-837, 2001. ,
Scanning electron microscopy imaging of dislocations in bulk materials, using electron channeling contrast, Microscopy research and technique, vol.69, pp.374-381, 2006. ,
Accurate electron channeling contrast analysis of dislocations in fine grained bulk materials, Scripta Materialia, vol.84, pp.11-14, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01503460
Discrimination of dynamically and post-dynamically recrystallized grains based on ebsd data : application to Inconel 718, Journal of microscopy, vol.273, issue.2, pp.135-147, 2019. ,
Symmetry CMOS -New detector technology for EBSD, Journées Annuelles SF2M 2017, 2017. ,
A dictionary approach to electron backscatter diffraction indexing, Microscopy and Microanalysis, vol.21, issue.3, pp.739-752, 2015. ,
Dynamical electron backscatter diffraction patterns. Part I : Pattern simulations, Microscopy and Microanalysis, vol.19, issue.5, pp.1255-1265, 2013. ,
Orientation sampling for dictionary-based diffraction pattern indexing methods, Modelling and Simulation in Materials Science and Engineering, vol.24, issue.8, p.85013, 2016. ,
The BOBYQA algorithm for bound constrained optimization without derivatives, tech. rep., Department of Applied Mathematics and Theoretical Physics, 2009. ,
Effects of electric current on solid state phase transformations in metals, Materials Science and Engineering : A, vol.287, issue.2, pp.227-237, 2000. ,
Effect of electric current on the recrystallization behavior of cold worked ? ? T i, Scripta Metallurgica, vol.22, issue.2, pp.187-190, 1988. ,
Recrystallization and grain growth in nano-structured austenitic stainless steel under electric current heating, physica status solidi c, vol.7, issue.5, pp.1380-1383, 2010. ,
Enhanced recovery and recrystallization of metals due to an applied current, Scripta Materialia, vol.92, pp.3-6, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01558942
The surprising influence of continuous alternating electric current on recrystallization behaviour of a cold-rolled aluminium alloy, Materials Characterization, vol.129, pp.121-126, 2017. ,
A 3D numerical model of the temperaturetime characteristics of specimens tested on a Gleeble thermomechanical simulator, Modelling and Simulation in Materials Science and Engineering, vol.5, issue.6, pp.539-548, 1997. ,
Application of 3D numerical modelling for thermal profile optimization on the Gleeble thermomechanical simulator, Modelling and Simulation in Materials Science and Engineering, vol.7, issue.3, pp.297-309, 1999. ,
A coupled Electrical-Thermal-Mechanical modeling of Gleeble tensile tests for Ultra-High-Strength (UHS) steel at a high temperature, Metallurgical and Materials Transactions A, vol.41, issue.9, pp.2304-2317, 2010. ,
URL : https://hal.archives-ouvertes.fr/hal-00527828
A comparison of the plastic-flow response of a powder-metallurgy nickel-base superalloy under nominallyisothermal and transient-heating hot-working conditions, Metallurgical and Materials Transactions A, vol.48, issue.4, pp.1864-1879, 2017. ,
, Cold and hot forging : fundamentals and applications, vol.1, 2004.
The adiabatic correction factor for deformation heating during the uniaxial compression test, Journal of Materials Engineering and Performance, vol.10, issue.6, pp.710-717, 2001. ,
Effect of internal heating during hot compression on the stress-strain behavior of alloy 304L, Metallurgical and Materials Transactions A, vol.25, issue.12, pp.2737-2752, 1994. ,
Constitutive analysis of the hot deformation behavior of Fe-23Mn-2Al-0.2C twinning induced plasticity steel in consideration of strain, Materials and Design, vol.44, pp.354-364, 2013. ,
Flow softening of 253 MA austenitic stainless steel during hot compression at higher strain rates, Materials Science and Engineering : A, vol.650, pp.483-491, 2016. ,
Relationship between the austenite recrystallized fraction and the softening measured from the interrupted torsion test technique, Scripta Materialia, vol.40, issue.5, pp.543-549, 1999. ,
Prediction of metadynamic softening in a multi-pass hot deformed low alloy steel using artificial neural network, Journal of Materials Science, vol.43, issue.16, pp.5508-5515, 2008. ,
Study of metadynamic recrystallization behaviors in a low alloy steel, Journal of Materials Processing Technology, vol.209, issue.5, pp.2477-2482, 2009. ,
A new method to predict the metadynamic recrystallization behavior in 2124 aluminum alloy, Computational Materials Science, vol.50, issue.7, pp.2038-2043, 2011. ,
Characteristics of metadynamic recrystallization of Nimonic 80A superalloy, Journal of Materials Research, vol.30, issue.4, pp.538-546, 2015. ,
Physics and phenomenology of strain hardening : the fcc case, Progress in Materials Science, vol.48, issue.3, pp.171-273, 2003. ,
Characterization of the initial stages of dynamic recrystallization in ati 718plus R, Proceedings of the 9 th International Symposium on Superalloy 718 & Derivatives : Energy, Aerospace, and Industrial Applications, pp.405-420, 2018. ,
Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation, Acta Metallurgica, vol.17, issue.8, pp.1033-1043, 1969. ,
Microstructure modeling of the dynamic recrystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718 plus, Proceedings of the 11 th International Symposium on Superalloys, pp.855-861, 2008. ,
Short term precipitation kinetics of delta phase in strain free Inconel* 718 alloy, Materials Science and Technology, vol.20, issue.8, pp.1019-1026, 2004. ,
Hot deformation characteristics and dislocation substructure evolution of a nickel-base alloy considering effects of ? phase, Journal of Alloys and Compounds, vol.764, pp.1008-1020, 2018. ,
Hot working characteristics and dynamic recrystallization of delta-processed superalloy 718, Journal of Alloys and Compounds, vol.474, issue.1, pp.341-346, 2009. ,
Effects of initial ? phase (Ni 3 Nb) on hot tensile deformation behaviors and material constants of Ni-based superalloy, Transactions of Nonferrous Metals Society of China, vol.26, issue.1, pp.107-117, 2016. ,
Microstructure evolution of delta-processed IN718 during holding period after hot deformation, Journal of Materials Science, vol.47, issue.1, pp.251-256, 2012. ,
The influence of cold rolling on the precipitation of delta phase in Inconel 718 alloy, Scripta materialia, vol.37, issue.1, pp.53-57, 1997. ,
Relationship between the lattice constant of ? phase and the content of ? phase,? and ? phases in Inconel 718, Scripta materialia, vol.37, issue.1, pp.59-64, 1997. ,
Influence of cold rolling on the precipitation kinetics of ? and ? phases in Inconel 718 alloy, Journal of materials science letters, vol.17, issue.3, pp.245-247, 1998. ,
Effects of cold rolling on the precipitation kinetics and the morphology evolution of intermediate phases in Inconel 718 alloy, Journal of Alloys and Compounds, vol.649, pp.949-960, 2015. ,
Hot deformation behavior of delta-processed superalloy 718, Materials Science and Engineering : A, vol.528, issue.7, pp.3218-3227, 2011. ,
Dissolution mechanisms and kinetics of ? phase in an aged Ni-based superalloy in hot deformation process, Materials and Design, vol.156, pp.262-271, 2018. ,
Evolutions de microstructure au cours du forgeage de l'alliage René 65, 2016. ,
Grain boundary width, energy and self-diffusion in nickel : effect of material purity, Acta Materialia, vol.61, issue.14, pp.5188-5197, 2013. ,
Thermal and electromigration effects of electropulsing on dynamic recrystallization in Mg-3Al-1Zn alloy, Materials Science and Engineering : A, vol.528, pp.4431-4436, 2011. ,
Electro-plastic effect on tensile deformation behaviour and microstructural mechanism of AZ31B alloy, Materials Science and Technology, vol.33, issue.7, pp.836-845, 2017. ,
Effect of electric current heating on hot deformation resistance and microstructure of steels, Metals and Materials, vol.5, issue.6, pp.563-570, 1999. ,
Effect of electric current on aging of an Al-4 pct Cu alloy, Transactions of the Metallurgical Society of AIME, vol.227, issue.3, p.615, 1963. ,
Effect of direct current on precipitation in quenched Al+ 4% Cu thin films, Applied Physics Letters, vol.20, issue.6, pp.217-219, 1972. ,
The effect of direct electric current on precipitation in a bulk Al-4wt% Cu alloy, Journal of Materials Science, vol.11, issue.5, pp.809-816, 1976. ,
Retardation of the precipitation reaction by dc stress in an Al-12.5wt% Zn alloy, Journal of Materials Science, vol.12, issue.6, pp.1109-1114, 1977. ,
The effect of ac frequency on precipitation in Al-5.6at% Zn, Journal of materials science, vol.19, issue.12, pp.3935-3939, 1984. ,
The radial temperature gradient in the gleeble R hot-torsion test and its effect on the interpretation of plastic-flow behavior, Metallurgical and Materials Transactions A, vol.48, issue.11, pp.5357-5367, 2017. ,
, The superalloys : fundamentals and applications, 2008.
Essais de fluage, 1995. ,
The creep of Steel at high temperature, 1929. ,
Time-temperature relationship for rupture and creep stresses, Transactions of ASME, vol.74, pp.765-771, 1952. ,
An empirical relationship between rupture life and minimum creep rate in creep-rupture tests, ASTM 1956, vol.56, pp.593-620, 1956. ,
Modélisation du fluage par diffusion dans une céramique poreuse, 20 ème Congrès français de mécanique, 2011. ,
The temperature and orientation dependence of yielding in Mar-M200 single crystals, Materials Science and Engineering, vol.10, pp.87-92, 1972. ,
Physics of creep and creep-resistant alloys, 1995. ,
Steady state creep deformation of superalloy Inconel 718, Materials Science and Engineering, vol.89, pp.25-33, 1987. ,
Overaging, deformation and rupture micromechanisms of alloy 718 in relation to notch creep rupture strength, TMS, pp.589-602, 1991. ,
Etude de l'influence des traitements thermomécaniques et thermiques sur la microstructure et la tenue en fluage de l'alliage 718, 2007. ,
Etude de la déformation intergranulaire au cours du fluage à haute température d'un superalliage à base nickel polycristallin, 2010. ,
, Etude des relations entre microstructure et propriétés mécaniques du nouveau superalliage base nickel AD730, 2017.
Delta phase in Inconel 718 : mechanical properties and forging process requirements, pp.281-291, 1994. ,
The effect of ?-phase on crack propagation under creep and fatigue conditions in alloy 718, pp.545-555, 1994. ,
Effects of grain boundary precipitation on creep rupture properties of alloys 706 and 718 turbine disk forgings, pp.557-565, 1997. ,
The effect of ? phase on the mechanical properties of an Inconel 718 superalloy, Journal of Materials Engineering and Performance, vol.22, issue.5, pp.1512-1518, 2013. ,
? phase precipitation in Inconel 718 and associated mechanical properties, Materials Science and Engineering : A, vol.679, pp.48-55, 2017. ,
Hot tensile behavior of coldrolled Inconel 718 alloy at 650?C : The role of ? phase, Materials Science and Engineering : A, vol.722, pp.136-146, 2018. ,
The effect of grain boundary precipitates on the creep behavior of Inconel 718, Materials Science and Engineering : A, vol.183, issue.1-2, pp.81-89, 1994. ,
Dependence of creep fracture of Inconel 718 on grain boundary precipitates, Acta Materialia, vol.45, issue.7, pp.2735-2746, 1997. ,
, Mechanical metallurgy, vol.3, 1986.
Coherent precipitation and strengthening in compositionally complex alloys : A review, Entropy, vol.20, issue.11, pp.878-900, 2018. ,
Interaction of dislocations with coherent, stree-free ordered particles, Zeitschrift Fur Metallkunde, vol.69, issue.10, pp.628-634, 1978. ,
Inhomogeneous deformation in Inconel 718 during monotonic and cyclic loadings, Metallurgical Transactions A, vol.21, issue.12, pp.3215-3220, 1990. ,
Deformation and damage mechanisms in Inconel 718 superalloy, pp.593-606, 1994. ,
Coherency strengthening in Ni base alloys hardened by DO 22 ? precipitates, Metallurgical Transactions, vol.5, issue.1, pp.143-153, 1974. ,
Coarsening behaviour of ? and ? particles in Inconel alloy 718, Metal Science, vol.16, issue.12, pp.555-562, 1982. ,
Strengthening mechanisms in Inconel 718 superalloy, Metal Science, vol.17, issue.3, pp.145-149, 1983. ,
An estimate of the strengthening arising from coherent, tetragonally-distorted particles, Materials Science and Engineering, vol.13, issue.1, pp.51-56, 1974. ,
Aging of the Inconel 718 alloy between 500 and 750?C, Journal of materials research, vol.12, issue.9, pp.2298-2316, 1997. ,
Rôle de la taille de grains et de la précipitation sur le durabilité en fatigue de l'Inconel 718, 2018. ,
Effect of particle size on the creep rate of superalloy Inconel 718, Materials Science and Engineering, vol.89, pp.7-10, 1987. ,
Metallurgical stability of Inconel alloy 718, Proceedings of 6 th International Symposium on Superalloys, pp.33-42, 1988. ,
Deformation behaviour of ? strengthened Inconel 718, Acta Metallurgica, vol.36, issue.4, pp.847-864, 1988. ,
Precipitation of the ?-Ni 3 Nb phase in two nickel base superalloys, Metallurgical Transactions A, vol.19, issue.3, pp.453-465, 1988. ,
High temperature degradation of alloy 718 after longtime exposures, Proceedings of 7 th International Symposium on Superalloys, pp.497-506, 1992. ,
TEM study on microstructure behavior of alloy 718 after long time exposure at high temperatures, pp.649-658, 1994. ,
Effect of long-time exposure on the evolution of minor phases in alloy 718, Materials Science and Engineering : A, vol.364, issue.1-2, pp.27-34, 2004. ,
High temperature low cycle fatigue properties of alloy 625, Materials Science and Engineering : A, vol.650, pp.161-170, 2016. ,
Structural characterization of the aged Inconel 718, Journal of Alloys and Compounds, vol.306, issue.1-2, pp.277-284, 2000. ,
Delta phase precipitation in Inconel 718, Materials characterization, vol.53, issue.1, pp.7-16, 2004. ,
Effects of cold rolling on precipitates in Inconel 718 alloy, Journal of Materials Engineering and Performance, vol.11, issue.5, pp.504-508, 2002. ,
Nucleation on dislocations, Acta Metallurgica, vol.18, issue.11, pp.1209-1215, 1970. ,
Some aspects of the heterogeneous precipitation of the metastable ? phase in alloy 625, pp.407-417, 1994. ,
A comparison of the precipitation kinetics of ? particles in virgin and re-solutioned alloy 625, pp.487-495, 2005. ,
Influence de la mise en forme sur les cinétiques de précipitation durcissante dans les superalliages base nickel Inconel 625 et AD730, 2019. ,
Plastic zone sizes in fatigued specimens of Inco 718, Metallurgical and Materials Transactions A, vol.6, issue.12, pp.2305-2307, 1975. ,
Low cycle fatigue behavior of Inconel 718 at 298K and 823K, Metallurgical Transactions A, vol.8, issue.7, pp.1095-1105, 1977. ,