;. L. Références-[abrantes, L. V. Abrantes, M. D. Araújo, and . Levi, Voltammetric studies on copper deposition/dissolution reactions in aqueous chloride solutions, Minerals Engineering, vol.8, pp.1467-1475, 1995.

A. M. Alfantazi, T. M. Ahmed, and D. Tromans, Corrosion behavior of copper alloys in chloride media, Materials & Design, vol.30, pp.2425-2430, 2009.

;. M. Alvarez-lopez, M. D. Alvarez-lopez, J. A. Ereda, M. Valle, M. C. Fernandez-lorenzo et al., Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids, pp.1763-1771, 2009.

;. J. Appelbaum, W. F. Appelbaum, and . Brinkman, Theory of many-body effects in tunnelling, Physical Review, vol.186, p.2, 1969.

L. Bacarella and J. C. , Griess, the anodic dissolution of copper in following sodium chloride solution between 25 and 175°C, Journal of Electrochemical Society, vol.120, pp.459-465, 1973.

D. V. Bachurin, D. Weygand, and P. Gumbsch, Dislocation-grain boundary interaction in h111i textured thin metal films, acta materialia, vol.58, pp.5232-5241, 2010.

;. Bari, R. H. Bari, S. B. Patil, and A. R. Bari, Spray-pyrolized nanostructured CuO thin films for H2S gas sensor, International Nano Letters, vol.3, pp.1-5, 2013.

A. R. Bausch, M. J. Bowick, A. Cacciuto, A. D. Dinsmore, M. F. Hsu et al., Grain Boundary Scars and Spherical Crystallography, vol.299, p.1716, 2003.

L. Beaunier and M. , FROMENT, les mécanismes de corrosion intergranulaire des matériaux métalliques, C.R. Hebd. Séan. Acad. Sci, vol.278, p.667, 1974.

;. R. Behm, N. Behm, H. Garcia, and . Rohrer, Scanning tunneling microscopy and related methods Technology & Engineering, vol.78, p.525, 1990.

G. D. Bengough, R. M. Jones, and R. Pirret, Journal of the Institute of Metals, vol.23, p.65, 1920.

C. H. Bonfiglio, H. C. Albaya, and O. A. Cobo, The kinetics of the anodic dissolution of copper in acid chloride solutions, Corrosion Science, pp.717-724, 1973.

G. D. Bengough, R. M. Jones, and R. Pirret, Diagnosis od brass condenser tube corrosion, Journal of the Institute of Metals, vol.23, pp.65-158, 1920.

;. G. Bianchi, P. Bianchi, and . Longhi, Copper in see-water, potential-pH diagrams, Corrosion Science, pp.853-864, 1973.

;. G. Binnig, H. Binnig, C. Rohrer, and W. Gerber, Scanning tunneling microscopy, E. App. Phys. Lett, vol.40, pp.178-180, 1980.

G. Binnig, H. Rohrer, C. Gerber, and E. Weibel, Scanning tunneling microscopy, Phys. Rev. Lett, vol.49, pp.57-61, 1982.

;. G. Binnig, H. Binnig, and . Rohrer, Scanning tunneling microscopy, from birth to adolescence, Nobel lecture, Rev. Mod. Phys, vol.71, pp.324-330, 1987.

D. G. Brandon, The structure of high-angle grain boundaries, Acta Metall, vol.14, pp.1476-1482, 1966.

;. G. Bianchi, G. Bianchi, P. Fiori, F. Longhi, and . Mazza, Localized corrosion, vol.34, p.396, 1978.

;. L. Brossard and . Brossard, anodic dissolution of copper in concentrated LiCl solution at pH between 3and 7Journal of, vol.130, pp.403-405, 1983.

R. G. Blundy and M. J. Pryor, the potential dependence of reaction product composition on copper-nickel alloys, Corrosion Science, vol.12, pp.1880-1886, 1972.

H. Chen, L. H. Maurice, . Klein, . Lapeire, H. Verbeken et al., Grain boundary passivation studied by in situ scanning tunneling microscopy on microcrystalline copper, Journal of Solid State Electrochemistry, vol.19, pp.3501-3509, 2014.

;. Chen, M. Chen, . Bettayeb, L. Maurice, L. Klein et al., Local passivation of metals at grain boundaries: In situ scanning tunneling microscopy study on copper, corrosion science, vol.111, pp.659-666, 2016.

S. G. Choudhary, Emerging microbial control issues in cooling water systems, Hydrocarbon processing, vol.77, pp.91-102, 1998.

J. M. Cieslewicz and P. A. Schweitzer, Copper and Copper Alloys, Corrosion and Corrosion Protection Handbook, pp.125-152, 1989.

;. B. Craig and . Craig, Fundamental Aspects of Corrosion Films in Corrosion Science, 1991.

;. J. Crousier, L. Crousier, J. Pardessus, and . Crousier, voltamétrie study of copper in chloride solution, Electrochimica Acta, vol.33, pp.1039-1042, 1988.

F. Dabosi, G. Beranger, and B. Baroux, The passivation of iron in ammoniacal solutions containing copper (II) ions, hydrometallurgy, Aloya, pp.58-64, 1994.

[. E. De-jongh, D. Vanmaekelbergh, and J. J. Kelly, Cu2O: Electrodeposition and Characterization, chemistry of materials, vol.11, pp.3512-3517, 1999.

M. C. Barrio, D. R. Salinas, and S. G. Garcia, Electrochemical and in-situ stm study of the surface alloy formation in the system Au(100)/Cd, Electrochemica Acta, vol.130, pp.164-169, 2014.

C. Deslouis, B. Tribollet, G. Mengoli, and M. Musiani, electrochemical behaviour of copper in neutral aerated chloride solution, Journal of Applied Electrochemistry, vol.18, pp.374-383, 1988.

A. Desestret, M. Froment, and P. Guiraldenq, Intergranular corrosion in iron and nickel base alloy, Proceedings of the fourth International Congress on Metallic Corrosion, p.448, 1969.

;. C. Deslouis, O. R. Deslouis, M. M. Mattos, and B. Musiani, Tribollet, comments on mechanisims of copper electrodissolution in chloride media, Electrochimica Acta, vol.38, pp.2781-2783, 1993.

;. H. Dhar, R. E. Dhar, G. White, L. R. Burnell, R. B. Cornwell et al., corrosion of Cu and Cu-Ni alloys in 0.5 M NaCl and in synthetic seawater, vol.4, pp.317-323, 1985.

;. T. Dickinson, A. F. Dickinson, P. M. Povey, and J. Sherwood, Dissiolution and passivation of nickel, an X-ray photoelectron spctroscopie study, Chem. Soc. Faraday Trans.I, vol.73, pp.327-343, 1977.

L. E. Eiselstein, B. C. Syrett, S. S. Wing, and R. D. Caligiuri, The accelerated corrosion of Cu-Ni alloys in sulphide-polluted seawater, Corrosion Science, vol.23, pp.223-239, 1983.

;. A. El-warraky, H. A. El-warraky, E. M. El-shayeb, and . Sherif, pitting corrosion of copper in chloride solutions, Anti-Corrosion Methods Materials, vol.51, p.52, 2004.

;. U. Evans and . Evans, Oxygen distribution ad a factor in the corrosion of metals, Journal of the Chemical Society, vol.642, issue.127, pp.2484-2491, 1925.

G. Faita, G. Fiori, and D. Salvadore, Copper behaviour in acidic and alkaline brines, vol.15, pp.383-392, 1975.

Y. Feng, K. Siow, W. Teo, K. Tan, and A. Hsieh, Corrosion Mechanisms and Products of Copper in Aqueous Solutions at Various pH Values, corrosion science, vol.53, pp.389-398, 1997.

J. Flis, Stresse-Corrosion Cracking Of High Purity Iron in Ammonium Nitrate Solution, British corrosion journal, vol.3, pp.182-186, 1968.

K. P. Fitzgerald, J. Nairn, G. Skennerton, and A. Et-atrens, Atmospheric corrosion of copper and the colour, structure and composition of natural patinas on copper, Corrosion Science, vol.48, pp.2480-509, 2006.

;. M. Frary, C. A. Frary, and . Schuh, Combination rule for deviant CSL grain boundaries at triple junctions, Acta Materialia, pp.3731-3743, 2003.

R. L. Fullman, Crystallography and interfacial free energy of non-coherent twin boundaries in copper, Journal of Applied Physics, vol.22, p.456, 1951.

G. Gamow, Zur Quantentheorie des Atomkernes, vol.51, pp.204-212, 1928.

J. C. Hamilton, J. C. Farmer, and R. J. Et-anderson, In-situ Raman spectroscopy of anodic films formed on copper and silver in sodium hydroxide solution, Journal of the Electrochemical Society, vol.133, pp.739-784, 1986.

O. and H. Duparc, A review of some elements in the history of grain boundaries, centered on Georges Friedel, the coincident site lattice and the twin index, Journal of Materials Science, vol.46, pp.4116-4134, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01014024

;. G. Hasson, C. Hasson, and . Goux, Interfacial energies of tilt boundaries in aluminum, Scripta Metallurgica, vol.5, pp.889-894, 1971.

M. Heinemann, B. Eifert, and C. Heiliger, Band structure and phase stability of the copper oxides Cu 2 O, CuO, and Cu 4 O 3, Physical Review B, vol.87, pp.115-111, 2013.

F. J. Humphreys and M. Hatherly, Recrystallization and related annealing phenomena, 2004.

A. H. Jayatissa-;-jayatissa, K. Guo, and A. C. Jayasuriya, Potential dependence of cuprous/cupric duplex film growth on copper electrode in alkaline media, applied surface science, Applied Surface Science, vol.255, pp.689-297, 2006.

J. Jorgensen, L. Madsen, J. Garnaes, K. Carneiro, and K. Schaumburg, The scanning tunneling microscope and surface characterization, Vac. Sci. Technol., B, vol.12, pp.1698-1701, 1994.

G. Kear, B. D. Barker, and F. C. Walsh, Electrochemical Corrosion of Unalloyed Copper in Chloride Media-A Critical Review, Corrosion Science, vol.46, pp.109-135, 2004.

G. Killinççeker and H. Galip, The effects of acetate ions (CH3COO ? ) on electrochemical behavior of copper in chloride solutions, Material chemistry and physics, vol.15, pp.380-386, 2008.

;. J. Kruger and . Kruger, The oxide films formed on copper single crystal surfaces in pure water I: Nature of the films formed at room temperature, Journal of electrochemical society, vol.106, p.503, 1959.

;. J. Kunze, V. Kunze, L. H. Maurice, H. H. Klein, P. Syrehblow et al., situ STM study of the duplex passive films formed on Cu(1 1 1) and Cu(0 0 1) in 0.1 M NaOH, vol.46, pp.245-264, 2004.

;. N. Lang and . Lang, spectroscopy of single atoms in the scanning tunnelling microscope, Phys. Rev. B, vol.34, pp.5947-5950, 1986.

;. H. Lee, K. Lee, and A. J. Nobe, Pearlstein, film formation and current oscillation in the electro dissolution of cu in acidic chloride media, Journal of the Electrochemical Society, vol.132, pp.1031-1037, 1985.

H. P. Lee and K. Nobe, Kinetics and mechanisms of Cu electro dissolution in chloride media, Journal of Electrochemical Society, vol.133, pp.2035-2043, 1986.

R. D. Leggeti and W. H. Paxton, The corrosion of single crystals, bicrystals and polycrystals of an austenitic stainless steel in boiling nitric acid, Corrosion Science, vol.2, pp.211-218, 1962.

B. W. Lifka, D. D. Sprowls, and A. S. , M. Spec. Tech. Publ. U.S.A, vol.516, p.120, 1972.

;. G. Licina and . Licina, MIC in the Power Industry, 1993.

;. D. Macdonald and . Macdonald, Cyclic voltammetry of copper metal in lithium hydroxide solution at elevated temperature, Journal of the Electrochemical Society, vol.121, pp.651-656, 1974.

;. J. Mackenzie, M. J. Mackenzie, and . Thompson, some statistics associated with the random disorientation of cube, Biometrika, vol.44, pp.205-210, 1957.

F. B. Mansfeld, G. Liu, H. Xiao, C. H. Tsai, B. J. Little et al., The corrosion behavior of copper alloys, stainless steel and titanium in seewater, situ scanning tunneling microscopy study of the intergranular corrosion of copper, vol.36, pp.1-4, 1994.

;. V. Maurice, H. Maurice, P. Strehblow, and . Marcus, Situ STM Study of the Passivation of Cu, vol.146, pp.524-540, 1999.

;. V. Maurice, V. Maurice, P. Inard, and . Marcus, Critical factors in localized corrosion III, The Electrochemical Society Proceedings Series, PV 98-17, p.552, 1999.

;. V. Maurice, L. H. Maurice, P. Klein, and . Marcus, Atomic Structure of Metastable Pits Formed on Nickel, vol.4, pp.1-3, 2001.

;. P. Marcus, J. Marcus, I. Oudar, J. Olefjord, and . Microsc, XPS-Study of The Passive Film on Nickel, Spectrosc. Electron, vol.4, p.63, 1979.

;. P. Marcus and . Marcus, Analytical Methods in Corrosion Science and Engineering, p.760, 2006.

;. J. Mathiyarasu, N. Mathiyarasu, V. S. Palaniswamy, and . Muralidharan, Proceedings of the Indian Academy of Sciences--Chemical Sciences, vol.111, pp.377-386, 1999.

M. A. Meyers and C. Mccowan, The formation of annealing twins: overview and new thoughts, International Symposium on Interface Migration and Control of Microstructure, 1984.

M. Michiuchi, H. Kokawa, Z. J. Wang, Y. S. Sato, and K. Sakai, Twin-induced grain boundary engineering for 316 austenitic stainless steel, Acta Materialia, vol.54, pp.5179-5184, 2006.

J. Mieluch, M. Smialowski-;-b, M. I. Miller, and . Bellavance, Rotating ring disk electrode studies of corrosion rates and partial currents: Cu and Cu30Zn in oxygenated chloride solution, Journal of Electrochemical Society, vol.4, pp.1510-1517, 1964.

B. Millet, Etude électrochimique et photoélectrochimique de couches d'oxydes de cuivre semi-conductrices. Rôle d'un inhibiteur de corrosion du cuivre, 1994.

;. B. Millet, C. Millet, C. Fiaud, E. M. Hinnen, and . Sutter, A correlation between electrochemical behavior, composition and semiconducting properties of naturally grown oxide films on copper, Corrosion Science, vol.37, 1993.

H. Miyamoto, K. Harada, T. Mimaki, A. Vinogradov, and S. Shimoto, Corrosion of ultra-fine grained copper fabricated by equal-channel angular pressing, corrosion science, vol.50, pp.1215-1220, 2008.

;. A. Moreau, I. P. Moreau, F. Frayret, and . Rey, Corrosion Science, vol.52, pp.431-438, 1977.

A. Moreau, electrochemical behaviour of copper in neutral aerated chloride solution, Journal of Applied Electrochemistry, vol.26, p.1609, 1981.

;. A. Moreau, J. P. Moreau, F. Frayet, . Del, R. Rey et al., étude des phénomènes électrochimique et des transports de matière d'un system métal électrolytique : cas d'un disque tournant en cuivre dans des solutions aqueuses d'acide, pp.1281-1291, 1982.

B. Narayanan, S. A. Deshmukh, K. R. Sankaranarayanan, and S. Ramanathan, Strong correlations between structural order and passive state at water-copper oxide interfaces, Electrochimica Acta, vol.179, pp.386-393, 2015.

R. F. North and M. J. Pryor, The influence of corrosion product structure on the corrosion rate of Cu-Ni alloys, Corrosion Science, vol.10, pp.297-311, 1970.

G. Palumbo and K. T. Aust, Structure-dependence of intergranular corrosion in high purity nickel, Acta Metallurgica Materiala, vol.38, p.2343, 1990.

T. V. Pham-;-pham, M. Rao, P. Andreasson, Y. Peng, J. Wang et al., Photocarrier generation in CuxO thin films deposited by radio frequency sputtering, Applied Physics Letters, vol.102, pp.32-101, 2013.

M. Pourbaix, Atlas d'équilibres électrochimiques, éditions Gauthiers-Villars, Phase transformations in metals and alloys, 1963.

G. D. Preston and L. L. Bircumshaw, studies on the oxidation of metals Part II. Copper, brass, aluminium-brass, aluminium-bronze, magnesium and magnesium alloys, vol.20, pp.706-720, 1935.

;. L. Priester and . Priester, Approche géométrique des joints de grains. Intérêt et limite. Revue de Physique Appliquee, vol.15, pp.789-830, 1980.

L. Priester, Geometrical speciality and special properties of grain boundaries, Revue Phys. Appl, vol.24, pp.419-438, 1989.
URL : https://hal.archives-ouvertes.fr/jpa-00246064

L. Priester, ;. S. Ohnishi, and M. Tsukada, Effect of the microscopic electronic states of the tip on the scanning tunneling microscopy image, Journal of Vacum Science & Technology A, vol.8, pp.174-176, 1989.

S. Ratanaphan, T. Boonkird, R. Sarochawikasit, H. Beladi, K. Barmak et al., Atomistic simulations of grain boundary energies in tungsten, vol.186, pp.116-118, 2017.

S. Ratanaphan, D. Raabe, R. Sarochawikasit, D. L. Olmsted, G. S. Rohrer et al., journal of materials science, vol.52, pp.4070-4085, 2017.

V. Randle, mechanisme of twinning-induced grain boundary engineering in low stacking-fault energy materials, Acta Mater, vol.47, pp.4187-4196, 1999.

;. W. Randle, W. Read, and . Shockley, Dislocation models of crystal grain boundaries, Physical Revue, vol.78, issue.3, pp.275-289, 1950.

;. A. Rollett, ;. S. Rollett, M. Sathiyanarayanan, and . Sahrewkautek, Lecture notes, Misorientation distributions, rodrigues space, symmetry (L18), texture, microstructure and anisotropy, Corrosion Science, pp.1899-1909, 1999.

, The potential engineering of grain boundaries through thermomechanical processing, JOM Journal of the Minerals, Metals and Materials Society, vol.50, pp.50-55, 1998.

R. A. Schwarzer and J. Sukkau, Automated Evaluation of Kikuchi Patterns by Means of Radon and Fast Fourier Transformation, and Verification by an Artificial Neural Network, advanced engineering materials, vol.5, pp.601-606, 2003.

N. Serin, T. Serin, ?. Horzum, and Y. Celik, Annealing effects on the properties of copper oxide thin films prepared by chemical deposition. Semiconductor Science and Technology, vol.20, pp.398-405, 2005.

A. M. Shams-el-din, F. M. Abd-el, and . Wahab, The behavior of the copper electrode in alkaline solutions upon alternate anodic and cathodic polarization, Electrochimica Acta, vol.9, pp.113-121, 1964.

D. W. Shoesmith, T. E. Rummery, D. Owen, and W. Lee, Anodic Oxidation of Copper in Alkaline Solutions, J. Electrochem. Soc, vol.123, p.790, 1976.

L. S. Shvindlerman and B. B. , Straumal, regions of existence of special and nonspecial grain boundary, Acta Metall, vol.33, pp.1735-1749, 1985.

K. K. Shih and J. C. Li, Energy of grain boundaries between cusp misorientations, Surface Science, vol.50, pp.109-124, 1975.

;. J. Simmons and . Simmons, Electric Tunnel Effect between Dissimilar Electrodes Separated by a Thin Insulating Film, Journal of Applied Physics, vol.34, pp.2581-2590, 1963.

;. J. Simmons and . Simmons, Generalized Formula for the Electric Tunnel Effect between Similar Electrodes Separated by a Thin Insulating Film, Journal of Applied Physics, vol.6, pp.1793-1803, 1964.

;. J. Simmons and . Simmons, Generalized Thermal J-V Characteristic for the Electric Tunnel Effect, Journal of Applied Physics, vol.35, pp.2655-2658, 1964.

T. Skipmore, R. G. Buxchheit, and M. Juhas, Grain boundary energy vs. misorientation in inconel 600 alloy as measured by thermal groove and OIM analysis correlation, Scripta Materialia, vol.50, pp.873-877, 2004.

H. H. Strehblow and B. Titze, The investigation of passive behavior of copper in weakly acid and alkaline solutions and the examination of the passive film by ESCA and ISS, Electrochimica Acta, vol.25, pp.839-850, 1980.

T. Y. Soror, Scale and Corrosion Prevention in Cooling Water Systems -Part I: Calcium Carbonate, The Open Corrosion Journal, vol.2, pp.45-50, 2009.

C. Sunseri, S. Piazza, A. D. Paola, and F. D. Quarto, A Photocurrent Spectroscopic Investigation of Passive Films on, Ferritic Stainless Steels Journal of The Electrochemical Society, vol.134, pp.2410-2416, 1987.

;. J. Tersoff, D. R. Tersoff, and . Hamann, Theory of the scanning tunneling microscope, Phys. Rev. B, vol.31, pp.805-813, 1985.

. Guedou, Ingénierie des joints de grains dans les alliages à base de Nickel, congrès français de mécanique, 2009.

;. K. Trethewey, J. Trethewey, ;. Chamberlain, J. Tribollet, and . Newman, impedance model for a concentrated solution application to the electro dissolution of copper in chloride solutions, Corrosion for Science and Engineering, vol.131, pp.2780-2785, 1984.

D. Tromans and R. Sun, Anodic Polarization Behavior of Copper in Aqueous Chloride/Benzotriazole Solutions, journal of the electochemestry society, vol.138, pp.3235-3244, 1991.

;. M. Vazquez, S. R. Vazquez, E. J. Sanchez, D. J. Calvo, and . Schiffrin, The electrochemical reduction of hydrogen peroxide on polycristalline copper in borax buffer, Journal of Electroanalytical Chemistry, vol.374, pp.179-187, 1994.

Y. Van-ingelgem, E. Tourwé, J. Vereecken, and A. Et-hubin, Application of multisine impedance spectroscopy, FE-AES and FE-SEM to study the early stages of copper corrosion, Electrochimica Acta, vol.53, pp.7523-7553, 2008.

;. H. Videla, ;. Videla, H. Vinogradov, T. Miyamoto, S. Mimaki et al., corrosion cracking and fatigue of ultra-fine grain copper fabricated by severe plastic deformation, International Biodeterioration & Biodegradation, vol.49, pp.65-75, 2002.

;. C. Wagner and W. Traud, The interpretation of corrosion phenomena by superimposition of electrochemical partial reactions and the formation of potentials of mixed electrodes, Z. Electrochem, vol.44, pp.391-398, 1938.

;. M. Walton, P. A. Walton, and . Brook, the dissolution of Cu-Ni alloys in hydrochloric acid, Approach to grain boundary design for strong and ductile polycristals, vol.17, pp.47-84, 1977.

J. H. Weiner and Y. Partom, Quantum Rate Theory for Solids. II. One-Dimensional Tunneling Effects, Physical Review, vol.187, pp.1134-1146, 1969.

B. Wohlmann, Z. Park, M. Kruft, C. Stuhlmann, and K. Wandelt, An in-situ and exsitu study of chloide adsorption on Cu(111 ) electrodes in dilute HC1 solutions, Colloids and Surfaces, vol.134, pp.15-19, 1998.

, Structure-energy correlation for grain boundaries in f.c.c. metals of asymmetrical twist (general) boundaries, Acta Metallurgica et Materialia, vol.38, pp.791-798, 1990.

R. J. Wood, S. P. Hutton, D. J. Schiffain-;-xingai, . Yunbai, . Jili et al., Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting, corrosion science, Materials Characterization, vol.30, pp.961-967, 1990.

Q. Xu, K. Gao, Y. Wang, and X. Pang, Characterization of corrosion products formed on different surfaces of steel exposed to simulated groundwater solution, Applied Surface Science, vol.345, pp.10-17, 2015.

M. Yamashita, K. Omura, D. Hirayama, ;. Yamasaki, H. Miyamoto et al., Stress corrosion cracking susceptibility of ultra-fine grain copper produced by equal-channel angular, pressing, Material Science and Engineering, vol.96, pp.122-128, 1980.

;. B. Yuan, C. Yuan, L. Wang, S. Li, and . Chen, real time observation of the anodic dissolution of copper in NaCl solution with the digital holography, Electrochemistry communications, vol.11, pp.1373-1376, 2009.

F. P. Zamborini and R. M. Crooks, Situ Electrochemical Scanning Tunneling Microscopy (ECSTM) Study of Cyanide-Induced Corrosion of Naked and Hexadecyl Mercaptan-Passivated Au, vol.13, pp.122-126, 1979.

J. A. Zelinski, ;. Zhao, H. Song, J. Li, G. He et al., Origin of the Zn-induced Al intergranular corrosion of the outermost surface layer of the aluminium grain boundary: An ab initio study, Computational Materials Science, vol.102, pp.78-84, 2005.

H. Zhu, J. Zhang, C. Li, F. Pan, T. Wang et al., Cu 2 O thin films deposited by reactive direct current magnetron sputtering, Thin Solid Films, vol.517, pp.5700-5704, 2009.