A. Abou-chakra-guéry, Contributionsà la modélisation micromécanique du comportement non linéaire de l'argilite du callovo-oxfordien, 2007.

A. Abou-chakra-guéry, F. Cormery, J. Shao, and D. Kondo, A multiscale modeling of damage and time-dependent behavior of cohesive rocks, International journal for numerical and analytical methods in geomechanics, vol.33, issue.5, pp.567-589, 2009.

T. L. Anderson, Fracture mechanics : fundamentals and applications, 2017.

A. , Referentiel geologique du site de meuse/haute-marne, 1999.

L. Banks-sills and D. Ashkenazi, A note on fracture criteria for interface fracture, International Journal of Fracture, vol.103, issue.2, pp.177-188, 2000.

J. Barthélémy, Compliance and hill polarization tensor of a crack in an anisotropic matrix, International Journal of Solids and Structures, vol.46, pp.4064-4072, 2009.

Y. Benveniste, The effective mechanical behaviour of composite materials with imperfect contact between the constituents, Mechanics of Materials, vol.4, issue.2, pp.197-208, 1985.

Y. Benveniste, A new approach to the application of mori-tanaka's theory in composite materials, Mechanics of materials, vol.6, issue.2, pp.147-157, 1987.

Y. Benveniste, G. Dvorak, and T. Chen, On diagonal and elastic symmetry of the approximate effective stiffness tensor of heterogeneous media, Journal of the Mechanics and Physics of Solids, vol.39, issue.7, pp.927-946, 1991.

M. Bornert, T. Bretheau, and P. Gilormini, Homogénéisation en mécanique des matériaux, Matériaux aléatoiresélastiques et milieux périodiques, vol.1, 2001.

M. Bornert, F. Vales, H. Gharbi, and D. Nguyen-minh, Multiscale full-field strain measurements for micromechanical investigations of the hydromechanical behaviour of clayey rocks, Strain, vol.46, issue.1, pp.33-46, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00535703

W. Brace, An extension of the griffith theory of fracture to rocks, Journal of Geophysical Research, vol.65, issue.10, pp.3477-3480, 1960.

J. Brommundt, T. U. Kaempfer, C. Enssle, G. Mayer, and J. Wendling, Full-scale 3d modelling of a nuclear waste repository in the callovo-oxfordian clay. part 1 : thermo-hydraulic two-phase transport of water and hydrogen, Special Publications, vol.400, issue.1, pp.443-467, 2014.

B. Budiansky and R. J. O'connell, Elastic moduli of a cracked solid, International journal of Solids and structures, vol.12, issue.2, pp.81-97, 1976.

H. Cao and A. Evans, An experimental study of the fracture resistance of bimaterial interfaces, Mechanics of materials, vol.7, issue.4, pp.295-304, 1989.

P. P. Castañeda and J. R. Willis, The effect of spatial distribution on the effective behavior of composite materials and cracked media, Journal of the Mechanics and Physics of Solids, vol.43, issue.12, pp.1919-1951, 1995.

M. Castelli and C. Scavia, Fracture mechanics approach to the study of failure in rock, Revue française de génie civil, vol.8, issue.5-6, pp.653-682, 2004.

M. Charalambides, A. Kinloch, Y. Wang, and J. Williams, On the analysis of mixed-mode failure, International Journal of Fracture, vol.54, issue.3, pp.269-291, 1992.

X. Chateau and L. Dormieux, Approche micromécanique du comportement d'un milieu poreux non saturé, Comptes Rendus de l'Académie des Sciences-Series IIB-Mechanics-Physics-Astronomy, vol.326, issue.9, pp.533-538, 1998.

A. Chiarelli, J. Shao, and N. Hoteit, Modeling of elastoplastic damage behavior of a claystone, International Journal of plasticity, vol.19, issue.1, pp.23-45, 2003.

M. Comninou, The interface crack, Journal of Applied Mechanics, vol.44, issue.4, pp.631-636, 1977.

M. Comninou, The interface crack in a shear field, Transactions, Journal of Applied Mechanics, vol.45, pp.287-290, 1978.

M. Comninou and D. Schmueser, The interface crack in a combined tensioncompression and shear field, Transactions, Journal of Applied Mechanics, vol.46, pp.345-348, 1979.

C. Coulomb, Remarque sur la rupture des corps, Mémoire présenté par divers savantsà l'Académie, vol.7, 1776.

V. Deude, L. Dormieux, D. Kondo, and S. Maghous, Micromechanical approach to nonlinear poroelasticity : application to cracked rocks, Journal of engineering mechanics, vol.128, issue.8, pp.848-855, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00140488

V. Deudé, L. Dormieux, D. Kondo, and V. Pensée, Propriétésélastiques non linéaires d'un milieu mésofissuré, Comptes Rendus Mécanique, vol.330, issue.8, pp.587-592, 2002.

L. Dormieux and D. Kondo, Micromechanics of damage propagation in fluidsaturated cracked media, Revue Européenne de Génie Civil, vol.11, issue.7-8, pp.945-962, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00190866

L. Dormieux, D. Kondo, and F. Ulm, A micromechanical analysis of damage propagation in fluid-saturated cracked media, Comptes Rendus Mecanique, vol.334, issue.7, pp.440-446, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00090596

L. Dormieux, D. Kondo, and F. Ulm, , 2006.

L. Dormieux, A. Molinari, and D. Kondo, Micromechanical approach to the behavior of poroelastic materials, Journal of the Mechanics and Physics of Solids, vol.50, issue.10, pp.2203-2231, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00140491

J. Dundurs, The interface crack under combined loading, Journal of Applied Mechanics, vol.55, p.581, 1988.

A. England, A crack between dissimilar media, J. appl. Mech, vol.32, issue.2, pp.400-402, 1965.

F. Erdogan, Stress distribution in bonded dissimilar materials with cracks, Journal of Applied Mechanics, vol.32, issue.2, pp.403-410, 1965.

F. Erdogan and G. Sih, On the crack extension in plates under plane loading and transverse shear, Journal of basic engineering, vol.85, issue.4, pp.519-525, 1963.

J. D. Eshelby, The determination of the elastic field of an ellipsoidal inclusion, and related problems, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, vol.241, pp.376-396, 1226.

I. García, V. Manti?, and E. Graciani, Debonding at the fibre-matrix interface under remote transverse tension. one debond or two symmetric debonds ?, European Journal of Mechanics-A/Solids, vol.53, pp.75-88, 2015.

A. Gautesen and J. Dundurs, The interface crack in a tension field, Journal of Applied Mechanics, vol.54, issue.1, pp.93-98, 1987.

A. Giraud, Q. V. Huynh, D. Hoxha, and D. Kondo, Effective poroelastic properties of transversely isotropic rock-like composites with arbitrarily oriented ellipsoidal inclusions, Mechanics of Materials, vol.39, issue.11, pp.1006-1024, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00169477

A. Giraud and I. Sevostianov, Micromechanical modeling of the effective elastic properties of oolitic limestone, International Journal of Rock Mechanics and Mining Sciences, vol.62, pp.23-27, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01301481

A. A. Griffith, The phenomena of rupture and flow in solids. Philosophical transactions of the royal society of london. Series A, containing papers of a mathematical or physical character 221, pp.163-198, 1921.

Z. Hashin, Analysis of composite materials-a survey, Journal of Applied Mechanics, vol.50, issue.3, pp.481-505, 1983.

Z. Hashin, The differential scheme and its application to cracked materials, Journal of the Mechanics and Physics of Solids, vol.36, issue.6, pp.719-734, 1988.

C. Hellmich, J. Barthélémy, and L. Dormieux, Mineral-collagen interactions in elasticity of bone ultrastructure-a continuum micromechanics approach, European Journal of Mechanics-A/Solids, vol.23, issue.5, pp.783-810, 2004.
URL : https://hal.archives-ouvertes.fr/hal-01977090

R. Hill, Elastic properties of reinforced solids : some theoretical principles, Journal of the Mechanics and Physics of Solids, vol.11, issue.5, pp.357-372, 1963.

R. Hill, A self-consistent mechanics of composite materials, Journal of the Mechanics and Physics of Solids, vol.13, issue.4, pp.213-222, 1965.

A. Hoenig, Elastic moduli of a non-randomly cracked body, International Journal of Solids and Structures, vol.15, issue.2, pp.137-154, 1979.

H. Horii and S. Nemat-nasser, Overall moduli of solids with microcracks : loadinduced anisotropy, Journal of the Mechanics and Physics of Solids, vol.31, issue.2, pp.155-171, 1983.

J. W. Hutchinson and Z. Suo, Mixed mode cracking in layered materials, Advances in applied mechanics, vol.29, pp.63-191, 1991.

Q. V. Huynh, Estimation des propriétés poromécaniques effectives des argilites : apport des méthodes d'homogénéisation, 2006.

G. R. Irwin, Analysis of stresses and strains near the end of a crack traversing a plate, Journal of applied mechanics, vol.24, issue.3, pp.361-364, 1957.

M. Janssen, J. Zuidema, and R. Wanhill, Fracture mechanics : Fundamentals and applications, 2004.

L. Kachanov, Introduction to continuum damage mechanics, vol.10, 2013.

M. Kachanov, Effective elastic properties of cracked solids : critical review of some basic concepts, Applied Mechanics Reviews, vol.45, issue.8, pp.304-335, 1992.

M. Kachanov, Elastic solids with many cracks and related problems, Advances in applied mechanics, vol.30, pp.259-445, 1993.

N. Laws, On interfacial discontinuities in elastic composites, Journal of Elasticity, vol.5, issue.3-4, pp.227-235, 1975.

N. Laws, A note on penny-shaped cracks in transversely isotropic materials, Mechanics of Materials, vol.4, issue.2, pp.209-212, 1985.

J. Leblond and P. Germain, Mécanique de la rupture fragile et ductile, 2003.

K. Liechti and Y. Chai, Asymmetric shielding in interfacial fracture under in-plane shear, Journal of applied mechanics, vol.59, issue.2, pp.295-304, 1992.

B. Malyshev and R. Salganik, The strength of adhesive joints using the theory of cracks, International Journal of Fracture, vol.1, issue.2, pp.114-128, 1965.

V. Manti, A. Blázquez, E. Correa, and F. París, Analysis of interface cracks with contact in composites by 2d bem. WIT Transactions on State-of-the, 2005.

V. Manti?, Interface crack onset at a circular cylindrical inclusion under a remote transverse tension. application of a coupled stress and energy criterion, International journal of Solids and Structures, vol.46, issue.6, pp.1287-1304, 2009.

X. Markenscoff and C. Dascalu, Asymptotic homogenization analysis for damage amplification due to singular interaction of micro-cracks, Journal of the Mechanics and Physics of Solids, vol.60, issue.8, pp.1478-1485, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01666680

P. Martin, The spherical-cap crack revisited, International journal of solids and structures, vol.38, pp.4759-4776, 2001.

M. Martynenko, The axisymmetric problem for an elastic medium with a spherical inclusion, Dokl. Akad. Nauk USSR, Ser. A, vol.7, pp.39-44, 1983.

M. Martynenko and I. Lebedyeva, Axisymmetric problem for a spherical crack on the interface of elastic media, Journal of engineering mathematics, vol.56, issue.4, pp.371-384, 2006.

M. Martynenko and A. Ulitko, Stress state near the vertex of a spherical notch in an unbounded elastic medium, International Applied Mechanics, vol.14, issue.9, pp.911-918, 1978.

L. M. Milne-thomson, Plane elastic systems, vol.6, 1968.

M. Mohajerani, Etude expérimentale du comportement thermo-hydromécanique de l'argilite du callovo-oxfordien, 2011.

T. Mori and K. Tanaka, Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta metallurgica, vol.21, issue.5, pp.571-574, 1973.

T. Mura, Micromechanics of defects in solids, 2013.

N. I. Muskhelishvili, Some basic problems of the mathematical theory of elasticity, 1953.

V. Pensée, Contribution de la micromécaniqueà la modélisation tridimensionnelle de l'endommagement par mésofissuration, 2002.

V. Pensée, D. Kondo, and L. Dormieux, Micromechanical analysis of anisotropic damage in brittle materials, Journal of Engineering Mechanics, vol.128, issue.8, pp.889-897, 2002.

A. Perlman and G. Sih, Elastostatic problems of curvilinear cracks in bonded dissimilar materials, International Journal of Engineering Science, vol.5, issue.11, pp.845-867, 1967.

A. Pouya, A finite element method for modeling coupled flow and deformation in porous fractured media, International Journal for Numerical and Analytical Methods in Geomechanics, vol.39, issue.16, pp.1836-1852, 2015.

P. Prasad and K. Simha, Interactions of interfacial arc cracks, International Journal of Fracture, vol.117, issue.1, pp.39-62, 2002.

P. Prasad and K. Simha, Interface crack around circular inclusion : Sif, kinking, debonding energetics, Engineering Fracture Mechanics, vol.70, issue.2, pp.285-307, 2003.

N. Prokhorova and I. I. Solov'ev, Axisymmetric problem for an elastic space with a spherical cut : Pmm, Journal of Applied Mathematics and Mechanics, vol.40, issue.4, pp.640-646, 1976.

I. Raju, J. Crews, and M. Aminpour, Convergence of strain energy release rate components for edge-delaminated composite laminates, Engineering fracture mechanics, vol.30, issue.3, pp.383-396, 1988.

J. Rice, Elastic fracture mechanics concepts for interfacial cracks, J. Appl. Mech.(Trans. ASME), vol.55, issue.1, pp.98-103, 1988.

J. Rice and G. C. Sih, Plane problems of cracks in dissimilar media, Journal of Applied Mechanics, vol.32, issue.2, pp.418-423, 1965.

J. Robinet, P. Sardini, D. Coelho, J. Parneix, D. Prêt et al., Effects of mineral distribution at mesoscopic scale on solute diffusion in a clay-rich rock : Example of the callovo-oxfordian mudstone (bure, france), Water Resources Research, vol.48, issue.5, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00827642

J. Schjødt-thomsen and R. Pyrz, The mori-tanaka stiffness tensor : diagonal symmetry, complex fibre orientations and non-dilute volume fractions, Mechanics of Materials, vol.33, issue.10, pp.531-544, 2001.

C. Shih, Cracks on bimaterial interfaces : elasticity and plasticity aspects, Materials Science and Engineering : A, vol.143, issue.1-2, pp.77-90, 1991.

C. Sun and Z. Jin, Fracture mechanics, 2012.

C. Sun and W. Qian, The use of finite extension strain energy release rates in fracture of interfacial cracks, International Journal of Solids and Structures, vol.34, issue.20, pp.2595-2609, 1997.

C. T. Sun and C. Jih, On strain energy release rates for interfacial cracks in bi-material media, Engineering Fracture Mechanics, vol.28, issue.1, pp.13-20, 1987.

R. ;. Talreja, Y. Huang, C. Liu, and P. H. Geubelle, The mori-tanaka method for composite materials with nonlinear interface debonding, Philosophical Transactions of the Royal Society A : Mathematical, Physical and Engineering Sciences Tan, vol.21, issue.10, pp.1890-1918, 2005.

M. Thompson and J. Willis, A reformation of the equations of anisotropic poroelasticity, Journal of Applied Mechanics, vol.58, issue.3, pp.612-616, 1991.

M. Toya, A crack along the interface of a circular inclusion embedded in an infinite solid, Journal of the Mechanics and Physics of Solids, vol.22, issue.5, pp.325-348, 1974.

M. Toya, On mode i and mode ii energy release rates of an interface crack, International journal of fracture, vol.56, issue.4, pp.345-352, 1992.

J. Walsh, The effect of cracks on the compressibility of rock, Journal of Geophysical Research, vol.70, issue.2, pp.381-389, 1965.

J. Walsh, The effect of cracks on the uniaxial elastic compression of rocks, Journal of Geophysical Research, vol.70, issue.2, pp.399-411, 1965.

P. Weißgraeber, D. Leguillon, and W. Becker, A review of finite fracture mechanics : crack initiation at singular and non-singular stress raisers, Archive of Applied Mechanics, vol.86, issue.1-2, pp.375-401, 2016.

M. Williams, The stresses around a fault or crack in dissimilar media, Bulletin of the seismological society of America, vol.49, issue.2, pp.199-204, 1959.

A. Zaoui, Matériaux hétérogènes et composites : majeure de mécanique, option matériaux et structures : promotion 1998, majeure 1, 2e année, 2000.

A. Zaoui, Continuum micromechanics : survey, Journal of Engineering Mechanics, vol.128, issue.8, pp.808-816, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00111366

Q. Zheng and D. Du, An explicit and universally applicable estimate for the effective properties of multiphase composites which accounts for inclusion distribution, Journal of the Mechanics and Physics of Solids, vol.49, issue.11, pp.2765-2788, 2001.

Q. Zhu, D. Kondo, and J. Shao, Homogenization-based analysis of anisotropic damage in brittle materials with unilateral effect and interactions between microcracks, International Journal for Numerical and Analytical Methods in Geomechanics, vol.33, issue.6, pp.749-772, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00381088

R. W. Zimmerman, The effect of microcracks on the elastic moduli of brittle materials, Journal of Materials Science Letters, vol.4, issue.12, pp.1457-1460, 1985.

V. Ziuzin and V. Mossakovskii, Axisymmetric loading of a space with a spherical cut : Pmm, Journal of Applied Mathematics and Mechanics, vol.34, issue.1, pp.172-177, 1970.