Manuscrit de thèse : Conséquences des interactions physico-chimiques résultantes de l'utilisation d'un matériau composite SiC/SiC dans un environnement caractéristique des réacteurs nucléaires du futur, 2014. ,
Sodium fast reactor evaluation: Core materials, Journal of Nuclear Materials, vol.392, issue.2, pp.324-330, 2009. ,
Stability of SiC and its Composites at High Neutron Fluence, Journal of Nuclear Materials, vol.417, pp.400-405, 2011. ,
Corps d'assemblage de combustible nucléaire et un assemblage de combustible nucléaire comportant un tel corps, Brevet FR, vol.2951312, 2011. ,
Matériaux semi-conducteurs à grand gap: SiC, 1998. ,
Polytype distribution of circumstellar silicon carbide, Geochimica et Cosmochimica Acta, vol.67, issue.24, pp.4743-4767, 2003. ,
Handbook of SiC properties for fuel performance modeling, Journal of Nuclear Materials, vol.371, issue.1, pp.329-377, 2007. ,
, Applied Science ; Sole distributor in the USA and Canada, 1991.
Properties and Characteristics of SiC and SiC/SiC composites, Comprehensive Nuclear Materials, vol.2, pp.323-338, 2012. ,
URL : https://hal.archives-ouvertes.fr/hal-01695780
Mechanical properties of advanced SiC fiber composites irradiated at very high temperatures, Journal of Nuclear Materials, vol.417, issue.1, pp.416-420, 2011. ,
Matériaux composites à matrice céramique et à renfort par fibres longues, 2014. ,
Stability of SiC and its composites at high neutron fluence, Journal of Nuclear Materials, vol.417, issue.1, pp.400-405, 2011. ,
Critical issues and current status of SiC/SiC composites for fusion, Journal of Nuclear Materials, vol.283, pp.128-137, 2000. ,
Plan de développement de la gaine combustible SiC/SiC et programme de recherche pour l'amélioration de l'interphase, 2006. ,
Tensile Creep Behavior of SiC-Based Fibers with a Low Oxygen Content, Journal of The American Ceramic Society, vol.90, issue.4, pp.1146-1156, 2007. ,
Influence of Interface Characteristics on the Mechanical Properties of Hi-Nicalon type-S or Tyranno-SA3 Fiber-Reinforced SiC/SiC Minicomposites: Influence of Interface Characteristics on the Mechanical Properties, International Journal Of Applied Ceramic Technology, vol.7, issue.3, pp.291-303, 2010. ,
Effect of heat treatment on the tensile strength and creep resistance of advanced SiC fibers, Journal of Nuclear Materials, vol.329, pp.592-596, 2004. ,
The effect of high dose/high temperature irradiation on high purity fibers and their silicon carbide composites, Journal of Nuclear Materials, vol.307, pp.1157-1162, 2002. ,
, Data sheet Nippon Carbone HNS Fibers
, Data sheet UBE TSA3 Fibers
Synthesis of continuous silicon carbide fibre. Part 4. The structure of polycarbosilane as the precursor, Journal of Materials Science, vol.21, pp.321-328, 1986. ,
, Handbook of ceramic composites, vol.200, 2006.
Study of Nicalon-based ceramic fibres and powders by EXAFS spectrometry, X-ray diffractometry and some additional methods, Journal of Materials Science, vol.24, issue.4, pp.1503-1512, 1989. ,
, Fundamentals of fibre reinforced composite materials, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00160373
Chapitre VI: Properties and Microstructures of Small-Diameter SiC-Based Fibers, pp.207-290, 1999. ,
Fine diameter ceramic fibres, Journal of The American Ceramic Society, vol.20, pp.2249-2260, 2000. ,
Development of high performance SiC fibers derived from polycarbosilane using electron beam irradiation curing -A review, Journal of the Ceramic Society of Japan, vol.114, issue.6, pp.455-460, 2006. ,
New tyranno-SA fiber reinforced CVI-SiC/SiC composite, Journal of Materials Science Letters, vol.21, issue.18, pp.1411-1413, 2002. ,
Conversion mechanisms of aaapolycarbosilane precursor into a SiC-based ceramic material, Journal of Materials Science, vol.26, issue.5, pp.1333-1345, 1991. ,
Advances in Inorganic Fibers, Polymeric and Inorganic Fibers, vol.178, pp.109-144, 2005. ,
Manuscrit de thèse : Elaboration et caractérisation de fils composites C/Al: infiltration spontanée et continue par activation chimique du mouillage, 2002. ,
Manuscrit de thèse : Procédés alternatifs pour l'élaboration de matériaux composites à matrice céramique, 2014. ,
, , vol.28
Manuscrit de thèse : Endommagement et microfissuration d'un composite à matrice céramique tissé 3D: approchemulti-échelle et évaluation ultrasonore, Université Sciences et Technologies-Bordeaux I, 2013. ,
The design of the fibre-matrix interfacial zone in ceramic matrix composites, Composites Part A : Applied Science and Manufacturing, vol.29, issue.9, pp.1145-1155, 1998. ,
Manuscrit de thèse : Etude du comportement des interfaces et des interphases dans les composites à fibres et à matrices céramiques, 2006. ,
Caractérisation de l'endommagement de composites tissés à matrice SiC, vol.23, pp.193-200, 1988. ,
, , 2010.
Current status and recent research achievements in SiC/SiC composites, Journal of Nuclear Materials, vol.455, issue.1-3, pp.387-397, 2014. ,
La croissance des pyrocarbones, L'Actualité Chimique, vol.295, pp.1-5, 2006. ,
URL : https://hal.archives-ouvertes.fr/hal-00092033
Carbonization and graphitization, Carbon, vol.22, issue.6, pp.521-541, 1984. ,
Manuscrit de thèse : Amélioration de la durée de vie de composites SiC/SiC à interphases nanoséquencées (PyC/SiC)n et (BN/SiC)n, 1998. ,
Manuscrit de thèse : Etude par microscopie à champ proche de la surface des fibres de carbone et de leur interface avec des matrices de pyrocarbone, 1999. ,
Carbones pyrolytiques ou pyrocarbones : des matériaux multiéchelles et multiperformances, 2015. ,
Manuscrit de thèse : Mécanismes chimiques de CVD/CVI de pyrocarbones aaaluminaires issus du propane : cinétique, texture et composition gazeuse, 2003. ,
Handbook of chemical vapor deposition, 1999. ,
The CVI-processing of ceramic matrix composites, Le Journal de Physique Colloques, vol.50, issue.5, pp.191-207, 1989. ,
URL : https://hal.archives-ouvertes.fr/jpa-00229549
Interfacial characterization of CVI-SiC/SiC composites, Journal of Nuclear Materials, vol.307, pp.1088-1092, 2002. ,
Manuscrit de thèse : Conséquences des interactions physico-chimiques résultantes aaade l'utilisation d'un matériau composite SiC/SiC dans un environnement caractéristique des aaaréacteurs nucléaires du futur, 2014. ,
Influence of chemical and physical properties of the last generation of silicon carbide fibres on the CHAPITRE 1 -SYNTHÈSE BIBLIOGRAPHIQUE ,
REPRODUCTION INTERDITE 29 mechanical behaviour of SiC/SiC composite, Journal of The American Ceramic Society, vol.32, issue.3, pp.547-557, 2012. ,
Crack deflection at an interface between aaaadissimilar elastic materials: role of residual stresses, International Journal of Solids and Structures, aaaavol, vol.31, issue.24, pp.3443-3455, 1994. ,
Procédé pour réduire la rugosité de surface de fibres en carbure de silicium destinées à être utilisées pour la réalisation d'un composite à matrice céramique, 2016. ,
Manuscrite de thèse : Influence des caractéristiques de surface des fibres de type aaaaHi-Nicalon S et Tyranno SA3 sur le comportement mécanique des composites SiC/SiC, 2012. ,
Characterization of nearly stoichiometric SiC ceramic fibres, Journal of Materials Science, vol.36, issue.10, pp.2371-2381, 2001. ,
The aaaainvestigation of crack mechanism for Tyranno-SA SiC/SiC composites with ESI method, pp.513-517, 2004. ,
Ceramic Matrix Composites: Nuclear Applications, Ceramic Matrix Composites: aaaaMaterials, Modeling, Technology and Applications, 2014. ,
Manuscrit de thèse : Etude du comportement mécanique des matériaux composites à matrice céramique de faible épaisseur, 2013. ,
Tensile creep behaviour of a silicon carbide-based fibre with a low oxygen content, Journal of Materials Science, vol.30, issue.3, pp.661-677, 1995. ,
Manuscrit de thèse : Augmentation de la durée de vie de composites à matrice céramique : rôle des fibres Si-C-O et des interphases B-C-N, 2012. ,
Mémoire d'Habilitation à Diriger la Recherche : A la recherche de la fibre céramique idéale -Evolution microstructurale et comportement local : l'indispensable lien entre Procédé de fabrication et Propriétés macroscopiques, 2011. ,
The use of XPS for characterisation of glass fibre coatings, Compos. Part Appl. Sci. Manuf, vol.30, issue.12, pp.1401-1413, 1999. ,
Coordination chemistry on carbon surfaces, Coordination Chemistry Reviews, vol.308, pp.236-345, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01927690
On the Chemical Nature of Graphene Edges:? Origin of Stability and Potential for Magnetism in Carbon Materials, Journal of the American Chemical Society, vol.127, issue.16, pp.5917-5927, 2005. ,
Manuscrit de thèse : Physico-chimie de l'interface fibres/matrice: applications aux composites Carbone/Carbone, 2013. ,
Air dielectric barrier discharges plasma surface treatment of three-dimensional braided carbon fiber reinforced epoxy composites, Surface and Coatings Technology, vol.203, issue.10, pp.1317-1321, 2009. ,
, Carbon Fibers, vol.210, 2015.
, Ceramic Matrix Composites: Materials, aaaaModeling, Technology and Applications, 2014.
Measurement and simulation of the aaaaoxidation of carbon fibers and C/SiC ceramic, Advances in Science and Technology, vol.45, pp.1489-1494, 2006. ,
Carbon fibers, Ceramic Matrix Composites: Materials, Modeling, Technology and aaaaApplications, 2014. ,
, Data sheet T300 Fibers
Fibres de carbone, 2008. ,
Deposition, Structure, and Properties of Pyrolytic Carbon, Chemistry of Carbon, pp.1-118, 1969. ,
Thermal behavior of (organosilicon) polymer-derived aaaaceramics. V: Main facts and trends, Journal of the European Ceramic Society, vol.16, issue.7, pp.721-737, 1996. ,
Graphitizability of carbonaceous materials as studied by TEM and X-ray diffraction, Journal of Microscopy, vol.132, issue.3, pp.353-363, 1983. ,
Manuscrit de thèse : Relation entre la microtexture et les propriétés mécaniques aaaaet électriques des fibres de carbone ex-polyacrylonitrile, 1985. ,
Manuscrit de thèse : Relation microstructure/propriétés à haute température dans les fibres et la matrice de carbone, 2001. ,
The tensile behavior of carbon fibers at high temperatures up to 2400°C, Carbon, vol.42, issue.4, pp.715-725, 2004. ,
Enhancing the fracture resistance of carbon fiber reinforced SiC matrix composites by interface modification through a simple fiber heat-treatment process, Carbon, vol.109, pp.435-443, 2016. ,
The structure of the interface in carbon fibre composites by scanning Auger microscopy, Journal of Materials Science, vol.25, issue.4, pp.1902-1908, 1990. ,
Nitrogen distribution in high tensile strength carbon fibres, Carbon, vol.28, issue.4, pp.573-578, 1990. ,
, Data sheet Nippon Carbone HNS fibers
, Data sheet UBE TSA3 fibers
, Data sheet T300 fibers
Manuscrit de thèse : Influence des caractéristiques de surface des fibres de type Hi-Nicalon S et Tyranno SA3 sur le comportement mécanique des composites SiC/SiC, 2012. ,
An introduction to thermogravimetry, 1975. ,
, Thermal analysis: fundamentals and applications to polymer science, 1999.
Mass spectrometry coupled to thermogravimetry (TG-MS) for evolved gas characterization: A review, Applied Spectroscopy Reviews, vol.33, issue.3, pp.189-218, 1998. ,
, , 2014.
Inverse gas chromatography applications: A review, Advances in Colloid and Interface Science, vol.212, pp.21-44, 2014. ,
, Surface Properties Characterization by Inverse Gas Chromatograph (IGC) Applications," Powders and Fibers: Interfacial Science and Applications, M. Nardin, pp.47-122, 2006.
Study by inverse gas chromatography of the surface properties of milled graphites, Journal of Chromatography A, pp.173-180, 2008. ,
Physicochemical Measurements (Inverse Gas Chromatography), pp.477-494, 2012. ,
Rapport d'Adscientis n°4000655362/P5B5, 2015. ,
Comparison of the surface properties of graphite, carbon black and fullerene samples, measured by inverse gas chromatography, Carbon, vol.37, issue.8, pp.1265-1274, 1999. ,
Modification of silica surfaces by grafting of alkyl chains. II-Characterization of silica surfaces by inverse gas-solid chromatography at finite concentration, Chromatographia, vol.23, issue.4, pp.279-285, 1987. ,
A new topological index for molecular probes used in inverse gas chromatography for the surface nanorugosity evaluation 1. Method of evaluation, Journal of Colloid and Interface Science, vol.194, issue.1, pp.207-216, 1997. ,
New approach to characterise physicochemical properties of solid substrates by inverse gas chromatography at infinite dilution -III. Determination of the acid-base properties of some solid substrates (polymers ,
X-ray-induced beam damage observed during x-ray photoelectron spectroscopy (XPS) studies of palladium electrode ink materials, Surface and Interface Analysis, vol.18, issue.3, pp.187-198, 1992. ,
, , 1976.
Guide de préparation des échantillons pour la microscopie électronique à transmission, 2007. ,
Thin foil preparation of small diameter ceramic or glass fibres for observation by transmission electron microscopy, Journal of Materials Science Letters, vol.12, issue.11, pp.825-828, 1993. ,
The sputtering of rough cylinders; applications to the thinning of fibres for transmission electron microscopy, Journal of Materials Science, vol.8, issue.4, pp.581-589, 1973. ,
Ion etching of amorphous and semicrystalline fibres, Journal of Materials Science, vol.10, issue.5, pp.758-764, 1975. ,
Focused ion beam sample preparation of continuous fibrereinforced ceramic composite specimens for transmission electron microscopy, Journal of Microscopy, vol.198, issue.2, pp.124-133, 2000. ,
Recent advances in FIB-TEM specimen preparation techniques, Materials Characterization, vol.57, issue.1, pp.64-70, 2006. ,
Introduction to focused ion beams: Instrumentation, theory, techniques and practice, 2005. ,
Thin-Film preparation of C/C composites and CMC using the broad argon ion beam method, Processing 17th International Conference on Composite Materials, 2007. ,
Transmission electron microscopy: a textbook for materials science, 2008. ,
High resolution electron microscopy of carbon structure, Journal of Microscopy, vol.109, issue.1, pp.145-152, 1977. ,
High-resolution imaging with an aberration-corrected transmission electron microscope, Ultramicroscopy, vol.92, issue.3, pp.233-242, 2002. ,
A sphericalaberration-corrected 200 kV transmission electron microscope, Ultramicroscopy, vol.75, issue.1, pp.53-60, 1998. ,
, Caractérisation microstructurale des matériaux: Analyse par les rayonnements X et électronique, METIS LyonTech, Presses polytechniques et universitaires romandes, 2011.
Pyrocarbon anisotropy as measured by electron diffraction and polarized light, Journal of Materials Research, vol.15, issue.1, pp.92-101, 2000. ,
On the terminology for pyrolytic carbon, Carbon, vol.40, issue.4, pp.621-624, 2002. ,
A methodology for analysis of 002 lattice fringe images and its application to combustion-derived carbons, Carbon, vol.38, issue.1, pp.29-45, 2000. ,
A new approach to characterize the nanostructure of activated carbons from mathematical morphology applied to high resolution transmission electron microscopy images, Carbon, vol.52, pp.239-258, 2013. ,
Analysis of HRTEM images for carbon nanostructure quantification, Journal of Nanoparticle Research, vol.6, issue.6, pp.555-568, 2004. ,
Structural features of pyrocarbon atomistic models constructed from transmission electron microscopy images, Carbon, vol.50, issue.12, pp.4388-4400, 2012. ,
URL : https://hal.archives-ouvertes.fr/hal-00773213
Nanoscale structure and texture of highly anisotropic pyrocarbons revisited with transmission electron microscopy, image processing, neutron diffraction and atomistic modeling, Carbon, vol.80, pp.472-489, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01717019
Investigating carbon materials nanostructure using image orientation statistics, Carbon, vol.84, pp.160-173, 2015. ,
URL : https://hal.archives-ouvertes.fr/hal-01120268
Morphological Characterization of Graphene Plans Stacking, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01482431
A Threshold Selection Method from Gray-Level Histograms, IEEE Transactions on Systems, Man, and Cybernetics, vol.9, issue.1, p.62, 1979. ,
, , 1989.
An interpretive model of line continuation in human visual perception, Pattern Recognition, vol.22, issue.5, pp.619-639, 1989. ,
Applications of image analysis in orientation space, Fourth Quinquennial Review 1996-2001 Dutch Society for Pattern Recognition and Image Processing, 2001. ,
, Spatially-variant structuring elements inspired by the neurogeometry of the visual cortex, Mathematical Morphology and Its Applications to Image and Signal Processing, 2011.
Connectivity on Complete Lattices, Journal of Mathematical Imaging and Vision, vol.9, issue.3, pp.231-251, 1998. ,
The thermal degradation of poly(vinyl alcohol), Polymer, vol.42, issue.16, pp.6775-6783, 2001. ,
The thermal degradation of poly(vinyl acetate) and poly(ethylene-co-vinyl acetate), Part I: Experimental study of the degradation mechanism, Polymer Degradation and Stability, vol.93, issue.4, pp.800-810, 2008. ,
Evaluation of high molecular weight species produced during thermal degradation of poly(vinyl alcohol), International Journal of Polymer Analysis Characterization, vol.3, issue.3, pp.193-202, 1997. ,
The Thermal Decomposition of Polyvinyl Alcohol Using Mass Spectrometer, Journal of the Physical Society of Japan, vol.12, issue.4, p.433, 1957. ,
Pyrolysis-gas chromatographic technique: Effect of temperature on thermal degradation of polymers, Analytical Chemistry, vol.35, issue.1, pp.69-73, 1963. ,
Carbonization of polymers I-Thermogravimetric analysis, Polymer, vol.3, issue.C, pp.1-10, 1962. ,
Nature of distribution of sulfur in slow coking of liquid products from thermal treatment of coal, Solid Fuel Chemistry, vol.17, issue.4, p.102, 1983. ,
Thermal Decomposition Products of Polyvinyl Chloride, Journal of Chemical Technology and Biotechnology, vol.17, issue.12, pp.364-366, 1967. ,
Quasiclassical trajectory calculations of acetaldehyde dissociation on a global potential energy surface indicate significant nontransition state dynamics, The Journal of Physical Chemistry A, vol.111, issue.34, pp.8282-8285, 2007. ,
Photodissociation of Acetaldehyde as a Second Example of the Roaming Mechanism, Proceedings of the National Academy of Sciences, vol.103, issue.44, pp.16079-16082, 2006. ,
FTIR study of the thermal degradation of poly(vinyl alcohol), Journal of Thermal Analysis and Calorimetry, vol.64, issue.2, pp.501-508, 2001. ,
Thermal-Decomposition Chemistry of Poly(vinyl alcohol) -Char Characterization and Reactions with Bismaleimides, Fire and Polymers, vol.II, issue.11, pp.161-185, 1995. ,
Calculations of electron inelastic mean free paths. VIII. Data for 15 elemental solids over the 50-2000 eV range, Surface and Interface Analysis, vol.37, issue.1, pp.1-14, 2005. ,
Measured electron IMFPs for SiC, Surface and Interface Analysis, vol.38, issue.4, pp.644-647, 2006. ,
Structural characterization of sol-gel derived oxycarbide glasses. 2. Study of the thermal stability of the silicon oxycarbide phase, Chemistry of materials, vol.7, issue.5, pp.975-981, 1995. ,
Understanding Nicalon® fibre, Journal of the European Ceramic Society, vol.11, issue.2, pp.95-103, 1993. ,
Thermal stability of a PCS-derived SiC fibre with a low oxygen content (Hi-Nicalon), Journal of materials science, vol.32, issue.2, pp.327-347, 1997. ,
Further studies of the stability of PCSbased ceramic fibres at high temperatures. I: Oxidation behaviour, British ceramic transactions, vol.94, issue.5, pp.177-184, 1995. ,
Thermodynamic Approach to the Oxidation of Hi-Nicalon Fiber, Journal of the American Ceramic Society, vol.82, issue.9, pp.2514-2516, 1999. ,
Composition-microstructure-property relationships in ceramic monofilaments resulting from the pyrolysis of a polycarbosilane precursor at 800 to 400° C, Journal of materials science, vol.26, issue.6, pp.1517-1530, 1991. ,
Nature of the use of adventitious carbon as a binding energy standard, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.13, issue.3, pp.1239-1246, 1995. ,
Vacuum Thermal Degradation of Poly(ethylene oxide), The Journal of Physical Chemistry B, vol.113, issue.10, pp.2984-2989, 2009. ,
Thermal degradation of poly(vinyl chloride)/poly(ethylene oxide) blends: Thermogravimetric analysis, Polymer degradation and stability, vol.98, issue.9, pp.1738-1743, 2013. ,
Characterization of degradation products of polyethylene oxide by pyrolysis mass spectrometry, European Polymer Journal, vol.30, issue.7, pp.845-850, 1994. ,
Thermal Degradation of Polyethylene Oxide and Polypropylene Oxide, Journal of Polymer Science Part A: Polymer Chemistry, vol.36, pp.183-194, 1959. ,
Degradation of PEO in the Solid State: A Theoretical Kinetic Model, Macromolecules, vol.42, issue.10, pp.3469-3482, 2009. ,
URL : https://hal.archives-ouvertes.fr/hal-00594584
Non-oxidative thermal degradation of poly(ethylene oxide): kinetic and thermoanalytical study, Journal of Analytical and Applied Pyrolysis, vol.73, issue.1, pp.131-138, 2005. ,
Mechanisms of Thermal Degradation of Phenolic Degradation Schemes of Epoxy Resins, Journal of Polymer Science Part A: Polymer Chemistry, vol.3, issue.3, pp.859-882, 1965. ,
The Thermal Degradation of Some Epoxy Resins, Journal of Polymer Science Part A: Polymer Chemistry, vol.56, issue.164, pp.383-389, 1962. ,
Thermal degradation of epoxy resin/carbon fiber composites: Influence of carbon fiber fraction on the fire reaction properties and on the gaseous species release, Fire and Materials, vol.40, issue.1, pp.27-47, 2016. ,
Manuscrit de thèse : Relation entre la microtexture et les propriétés mécaniques et électriques des fibres de carbone ex-polyacrylonitrile, 1985. ,
Effect of sizing on carbon fiber surface properties and fibers/epoxy interfacial adhesion, Applied Surface Science, vol.257, issue.15, pp.6980-6985, 2011. ,
Effect of heat treatment on carbon fiber surface properties and fibers/epoxy interfacial adhesion, Applied Surface Science, vol.257, issue.20, pp.8457-8461, 2011. ,
Influence of thermal treatment on thermo-mechanical stability and surface composition of carbon fiber, Applied Surface Science, vol.274, pp.89-94, 2013. ,
ESCA characterization of boron and silicon carbide mixed layers deposited on HR and HM carbon fibres by RCVD: Properties of the as-coated fibres, Composites Part A: Applied Science and Manufacturing, vol.27, issue.5, pp.365-377, 1996. ,
Manuscrit de thèse : Etude du résidu carboné et de la liaison fibre/matrice lors de la pyrolyse de composites carbone/phénolique, 2004. ,
Amorphous carbon, Advances in Physics, vol.35, issue.4, pp.317-374, 1986. ,
URL : https://hal.archives-ouvertes.fr/hal-01288828
Diamond-Like Carbon Films, Properties and Applications, Comprehensive Hard Mater, vol.3, pp.101-139, 2014. ,
Bonding and mechanical properties of ultrathin diamond-like carbon films, Applied Physics Letters, vol.81, issue.20, pp.3804-3806, 2002. ,
High-strength alkali-resistant sintered SiCfibre stable to 2,200°C, Nature, vol.391, pp.773-775, 1998. ,
New type of sintered SiC fiber and its composite material, Key Engineering Materials, pp.15-18, 1999. ,
,
,
,
,
,
,
,
112 4.1 Fibres T300 et T300THT revêtues de pyrocarbone ,
,
,
,
Morphological Characterization of Graphene Plans Stacking, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01482431
Microtexture and structure of semi-cokes and cokes, Fuel, vol.65, pp.1490-1500, 1986. ,
Manuscrit de thèse : Propriétés électroniques et structurales du graphène sur carbure de silicium, 2008. ,
Manuscrit de thèse : Relation entre la microtexture et les propriétés mécaniques et électriques des fibres de carbone ex-polyacrylonitrile, 1985. ,
Understanding Nicalon® fibre, Journal of the European Ceramic Society, vol.11, issue.2, pp.95-103, 1993. ,
Young's modulus, thermal expansion coefficient and fracture behavior of selected Si-B-C based carbides in the 20-1200°C temperature range as derived from the behavior of carbon fiber reinforced microcomposites, Journal of the European Ceramic Society, vol.27, issue.12, pp.3551-3560, 2007. ,
Imaging the interphase of carbon fiber composites using transmission electron microscopy: Preparations by focused ion beam, ion beam etching, and ultramicrotomy, Chinese Journal of Aeronautics, vol.28, issue.5, pp.1529-1538, 2015. ,
Résines époxy réticulées par des polyamines: structure et propriétés, vol.52, pp.317-335, 1997. ,
A Guide to Sample Preparation Methods for TEM in Materials Science and Biology, Microscopy and Analysis, vol.11, 2009. ,
Mémoire d'Habilitation à Diriger la Recherche : A la recherche de la fibre céramique idéale -Evolution microstructurale et comportement local : l'indispensable lien entre Procédé de fabrication et Propriétés macroscopiques, 2011. ,
The investigation of crack mechanism for Tyranno-SA SiC/SiC composites with ESI method, Journal of Nuclear Materials, vol.329, pp.513-517, 2004. ,
Tyranno (Si-Ti-CO) fibres, Journal of Materials Science, vol.28, issue.1, pp.121-128, 1993. ,
,
,
Influence of surface fibre properties and textural organization of a pyrocarbon interphase on the interfacial shear stress of SiC/SiC minicomposites reinforced with Hi-Nicalon S and Tyranno SA3 fibres, Journal of the European Ceramic Society, vol.34, pp.179-188, 2014. ,
Surface structures of PAN-based carbon fibers and their influences on the interface formation and mechanical properties of carbon-carbon composites, Composites Part A: Applied Science and Manufacturing, vol.90, pp.480-488, 2016. ,
Manuscrit de thèse : Relation microstructure/propriétés à haute température dans les fibres et la matrice de carbone, 2001. ,
Transverse and longitudinal coefficient of thermal expansion of carbon fibers at high temperatures (300-2500K), Carbon, vol.46, issue.14, pp.1874-1884, 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-02369732
Manuscrit de thèse : Caractérisation thermique et thermomécanique de fibres de carbone et céramique à très haute température, 2004. ,
Manuscrit de thèse : Comportement en milieu oxydant d'un composite carbone/carbone pour applications structurales entre 150 et 400°C dans l'aéronautique civile, 2013. ,
Manuscrit de thèse : Amélioration de la durée de vie de composites à matrice céramique à renforts carbone, 2003. ,
Influence of Interface Characteristics on the Mechanical Properties of Hi-Nicalon type-S or Tyranno-SA3 Fiber-Reinforced SiC/SiC Minicomposites, International Journal Of Applied Ceramic Technology, vol.7, issue.3, pp.291-303, 2010. ,
Influence of chemical and physical properties of the last generation of silicon carbide fibres on the mechanical behaviour of SiC/SiC composite, Journal of The American Ceramic Society, vol.32, issue.3, pp.547-557, 2012. ,
A methodology for analysis of 002 lattice fringe images and its application to combustion-derived carbons, Carbon, vol.38, issue.1, pp.29-45, 2000. ,
A new approach to characterize the nanostructure of activated carbons from mathematical morphology applied to high resolution transmission electron microscopy images, Carbon, vol.52, pp.239-258, 2013. ,
A new topological index for molecular probes used in inverse gas chromatography for the surface nanorugosity evaluation 1. Method of evaluation, Journal of Colloid and Interface Science, vol.194, issue.1, pp.207-216, 1997. ,
Manuscrit de thèse : Etude par microscopie champ proche de la surface des fibres de carbone et de leur interface avec des matrices de pyrocarbone, 1999. ,
Pyrocarbon deposits on a graphite surface observed by STM, Chemical Vapor Deposition, vol.7, issue.3, pp.125-130, 2001. ,
Manuscrit de thèse : CVD-CVI de pyrocarbones laminaires à partir du propane, Processus chimiques homogènes et hétérogènes, nanostructure, 2000. ,
Mechanical and microwave dielectric properties of KD-I SiC f/SiC composites fabricated through precursor infiltration and pyrolysis, Ceramics International, vol.40, issue.7, pp.9009-9016, 2014. ,
Influence of Strong Fiber/Coating Interfaces on the Mechanical Behavior and Lifetime of Hi-Nicalon/(PyC/SiC) n/SiC Minicomposites, Journal of the American Ceramic Society, vol.84, issue.4, pp.787-794, 2001. ,
Mechanical and Structural Analysis of Silicon Carbide Fiber Hi-Nicalon Type S, Proceedings of the 20th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures-B: Ceramic Engineering and Science Proceedings, vol.17, pp.35-42, 1996. ,
Mechanical properties of several advanced Tyranno-SA fiber-reinforced CVI-SiC matrix composites, Materials Science and Engineering: A, vol.345, issue.1, pp.28-35, 2003. ,
Preparation of SiC/SiC Composites by Hot Pressing, Using Tyranno-SA Fiber as Reinforcement, Journal of the American Ceramic Society, vol.86, issue.1, pp.26-32, 2003. ,
,
128 2.1 Comportement des composites renforcés par les fibres HNS ,
, 2.3 Mécanismes d'endommagement à l'interface fibre/matrice, Comportement des composites renforcés par les fibres TSA3
3.3 Mécanismes d'endommagement à l'interface fibre/matrice, Comportement des composites renforcés par les fibres ,
URL : https://hal.archives-ouvertes.fr/in2p3-00706656
145 3.1 Intensité du couplage fibre/matrice des minicomposites SiC/SiC ,
,
,
Manuscrit de thèse : Influence des caractéristiques de surface des fibres de type Hi-Nicalon S et Tyranno SA3 sur le comportement mécanique des composites SiC/SiC, 2012. ,
Manuscrit de thèse : Caractérisation des mécanismes d'endommagement et modélisation du comportement mecanique sous chargements multi-axiaux de tubes composites SiC/SiC, Ecole des Mines de, 2014. ,
Influence of Interface Characteristics on the Mechanical Properties of Hi-Nicalon type-S or Tyranno-SA3 Fiber-Reinforced SiC/SiC Minicomposites, International Journal Of Applied Ceramic Technology, vol.7, issue.3, pp.291-303, 2010. ,
Influence of surface fibre properties and textural organization of apyrocarbon interphase on the interfacial shear stress of SiC/SiCminicomposites reinforced with Hi-Nicalon S and Tyranno SA3 fibres, Journal of the European Ceramic Society, vol.34, issue.2, pp.179-188, 2014. ,
SiC/SiC minicomposites with nanoscale multilayered fibre coatings, Composites Science and Technology, vol.61, issue.3, pp.363-367, 2001. ,
Mechanical Properties of Hi-Nicalon S and SA3 Fiber Reinforced SiC/SiC Minicomposites, Mechanical Properties and Processing of Ceramic Binary, Ternary, and Composite Systems: Ceramic Engineering and Science Proceedings, vol.29, pp.89-99, 2009. ,
Microcomposite test procedure for evaluating the interface properties of ceramic matrix composites, Journal of the American Ceramic Society, vol.78, issue.2, pp.401-405, 1995. ,
Stochastic approach to multiple cracking in composite systems based on the extreme-values theory, Composites Science and Technology, vol.69, issue.10, pp.1607-1614, 2009. ,
Fiber Effects on Minicomposite Mechanical Properties for Several Silicon Carbide Fiber-Chemically Vapor-Infiltrated Silicon Carbide Matrix Systems, Journal of The American Ceramic Society, vol.82, issue.1, pp.145-155, 1999. ,
Strength improvement on an imaginary SiC fiber of ideal diameter and reduced internal defects estimated from the Weibull scaling of Tyranno ZMI fiber, JSME International Journal Series A Solid Mechanics and Material Engineering, vol.49, issue.1, pp.15-19, 2006. ,
A micromechanics-based approach to the mechanical behavior of brittle-matrix composites, Composites Science and Technology, vol.61, issue.15, pp.2259-2272, 2001. ,
Influence of Interface Characteristics on the Mechanical Properties of Hi-Nicalon type-S or Tyranno-SA3 Fiber-Reinforced SiC/SiC CHAPITRE 5 ,
, International Journal Of Applied Ceramic Technology, vol.7, issue.3, pp.291-303, 2010.
Stochastic approach to multiple cracking in composite systems based on the extreme-values theory, Composites Science and Technology, vol.69, issue.10, pp.1607-1614, 2009. ,
Development of damage in a 2D woven C/SiC composite under mechanical loading: I. Mechanical characterization, Composites Science and Technology, vol.56, issue.12, pp.1363-1372, 1996. ,
Elastic behavior analysis of 3D angle-interlock woven ceramic composites, Acta Mechanica Solida Sinica, vol.19, issue.2, pp.152-159, 2006. ,
Mechanical properties of 3D fiber reinforced C/SiC composites, Materials Science and Engineering: A, vol.300, issue.1, pp.196-202, 2001. ,
, Structure/oxidation behavior relationship in the carbonaceous constituents of 2D-C/PyC/SiC composites, vol.31, pp.1273-1288, 1993.
Influence des contraintes résiduelles sur le comportement mécanique des composites à matrice céramique, vol.94, pp.207-218, 1997. ,
Study of thermal residual stresses in ceramic matrix composites, Journal of alloys and compounds, vol.259, issue.1-2, pp.260-264, 1997. ,
The tensile behavior of carbon fibers at high temperatures up to 2400 °C, Carbon, vol.42, issue.4, pp.715-725, 2004. ,
Microstructural investigation of interfaces in CMCs, Composites Part A: Applied Science and Manufacturing, vol.33, issue.10, pp.1467-1470, 2002. ,
TEM observations of SiC-SiC materials with a carbon interphase after tests at high temperature, Microscopy Microanalysis Microstructures, vol.2, issue.1, pp.75-85, 1991. ,
Microstructural investigations of the pyrocarbon interphase in SiC fiber-reinforced SiC matrix composites, Materials Letters, vol.63, issue.23, pp.2029-2031, 2009. ,
Characterization of interfaces in C fiberreinforced laminated C-SiC matrix composites, Carbon, vol.38, issue.6, pp.831-838, 2000. ,
Mechanical and microwave dielectric properties of KD-I SiCf/SiC composites fabricated through precursor infiltration and pyrolysis, Ceramics International, vol.40, issue.7, pp.9009-9016, 2014. ,
,
,
3.2 Composition chimique de l'extrême surface des fibres TSA3 traitées, Analyse chimique des fibres TSA3-2% et TSA3 ,
174 3.1 Elaboration des composites TSA32%/PyC/SiC et TSA36%/PyC/SiC ,
, Caractérisation microstructurale des composites après essai mécanique
,
, , vol.180, p.170
, Data sheet Nippon Carbone HNS fibers
Manuscrit de thèse : Elaboration d'ensimages thermoplastiques thermostables : Influence sur le comportement mécanique des composites PEEK/Fibres de carbone, 2011. ,
Preparation of aqueous dispersion of thermoplastic sizing agent for carbon fiber by emulsion/solvent evaporation, Applied Surface Science, vol.266, pp.94-99, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-00835632
Sizing of carbon fibres with aqueous solutions of poly(vinyl pyrrolidone), Polymer, vol.39, issue.12, pp.2607-2613, 1998. ,
Glass fiber product for making perform products, Brevet WO, 2008. ,
Viscosity of dilute solutions of polyvinyl alcohol, Journal of Polymer Science Part A: Polymer Chemistry, vol.24, issue.105, pp.125-134, 1957. ,
Viscosity of moderately concentrated aqueous solutions of polyvinyl alcohol, Journal of Colloid Science, vol.17, issue.5, pp.426-438, 1962. ,
Polyvinyl alcohol. Properties and applications, 1973. ,
Pyrocarbon anisotropy as measured by electron diffraction and polarized light, Journal of Materials Research, vol.15, issue.1, pp.92-101, 2000. ,
Manuscrit de thèse : Influence des caractéristiques de surface des fibres de type Hi-Nicalon S et Tyranno SA3 sur le comportement mécanique des composites SiC/SiC, 2012. ,
Influence of surface fibre properties and textural organization of apyrocarbon interphase on the interfacial shear stress of SiC/SiCminicomposites reinforced with Hi-Nicalon S and Tyranno SA3 fibres, Journal of the European Ceramic Society, vol.34, pp.179-188, 2014. ,
Tube multicouche amélioré en matériau composite à matrice céramique, gaine de combustible nucléaire en résultat et procédés de fabrication associés, Brevet FR2978697, 2013. ,
The effect of fuel thermal conductivity on the behavior of LWR cores during loss-of-coolant accidents, Journal of Nuclear Materials, vol.448, issue.1, pp.512-519, 2014. ,
Cladding for high performance fuel, Progress in Nuclear Energy, vol.57, pp.71-76, 2012. ,