R. Agrawal, N. S. Saxena, K. B. Sharma, S. Thomas, and M. S. Sreekala, Activation energy and crystallization kinetics of untreated and treated oil palm fibre reinforced phenol formaldehyde composites, Materials Science and Engineering A, issue.99, pp.556-556, 2000.

Y. Amintowlieh, A. Sardashti, and L. C. Simon, Polyamide 6 -wheat straw composites: Effects of additives on physical and mechanical properties of the composite, Polymer Composites, pp.976-984

J. R. Araújo, C. B. Adamo, and M. De-paoli, Conductive composites of polyamide-6 with polyaniline coated vegetal fiber, Chemical Engineering Journal, pp.425-431, 2011.

P. A. Arcaya, A. Retegi, A. Arbelaiz, J. Kenny, and I. Mondragon, Mechanical properties of natural fibers/polyamides composites, pp.257-264, 2009.

A. D. , Competitive reactions in the thermal decomposition of cellulose, Canadian Journal of Chemistry, pp.632-638, 1971.

A. K. Bledzki and J. Gassan, Composites reinforced with cellulose based fibres, pp.221-274, 1999.

G. Bogoeva-gaceva, M. Avella, M. Malinconico, A. Buzarovska, A. Grozdanov et al., Natural fiber ecocomposites, Polymer Composites, pp.98-107, 2007.

H. Bos, The potential of flax fibres as reinforcement for composite materials, 2004.

D. Brosius, Available in <www.compositesworld.com/articles/naturalfiber-composites-slowly-take-root>, Access on, 2006.

R. Capart, L. Khezami, and A. K. Burnham, Assessment of various kinetic models for the pyrolysis of a microgranular cellulose, Thermochimica Acta, pp.79-89, 2004.

S. Chauhan, A. Karmarkar, and P. Aggarwal, Damping behavior of wood filled polypropylene composites, Journal of Applied Polymer Science, pp.2421-2426, 2009.

W. S. Chow and Z. A. Ishak, Mechanical, morphological and rheological properties of polyamide 6/ organo-montmorillonite nanocomposites, Express Polymer Letters, pp.77-83, 2006.

C. Clemons, Wood-plastic composites in the United States: the interfacing of two industries, Forest Products Journal, issue.6, pp.10-18, 2002.

F. M. Coutinho, T. H. Costa, and D. L. Carvalho, Polypropylene-wood fiber composites: Effect of treatment and mixing conditions on mechanical properties, Journal of Applied Polymer Science, vol.2, pp.1227-1235, 1997.

S. R. Culler, H. Ishida, and J. L. Koenig, The silane interphase of composites: effects of process conditions on ?-aminopropyltriethoxysilane, Polymer Composites, pp.231-238, 1986.

Y. Du and S. M. George, Molecular layer deposition of nylon 66 films examined using in situ FTIR spectroscopy, The Journal of Physical Chemistry C, pp.8509-8517, 2007.

S. J. Eichhorn, C. A. Baillie, N. Zafeiropoulos, L. Y. Mwaikambo, M. P. Ansell et al., Review: current international research into cellulose fibres and composites, Journal of Materials Science, pp.2107-2131, 2001.

T. Eklund, L. Brichter, J. Bächam, and J. Rosenholm, Thermogravimetric analysis of ?-aminopropyl-trimethoxysilane adsorbed on silica support, Journal of Thermal Analysis and Calorimetry, pp.67-76, 1999.

A. Etaati, S. Pather, Z. Fang, and H. Wang, The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis, Composites: Part B, pp.19-28, 2014.

H. Frisk and D. Schwendemann, Compounding wood fibers with plastics

C. Garcia-jaldon, D. Dupeyre, and M. R. Vignon, Fibres from semi-retted hemp bundles by steam explosion treatment, Biomass and Bioenergy, pp.251-260, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00302500

R. Gehm, Automotive Engineering International, p.46, 2006.

N. D. Ghatge and R. S. Khisti, Performance of new silane coupling agents along with phenolic no-bake binder for sand core, Journal of Polymer Materials, issue.6, pp.145-149, 1989.

L. Gonzalez, A. ;. Rodriguez, . De, J. L. Benito, and A. Marcos-fernandez, Applications of an azide sulfonyl silane as elastomer crosslinking and coupling agent, Journal of Applied Polymer Science, vol.63, pp.1353-1359, 1997.

T. M. Gowda, Some mechanical properties of untreated jute fabric-reinforced polyester composites, Composites Part A: Applied Science and Manufacturing, issue.98, pp.157-159, 1999.

I. Grafova, M. Kemell, J. N. Lunz, M. F. Marques, A. Grafov et al., Curauá fibre microimaging, atomic layer deposition of metal oxide films, and obtaining of thin wall nanotubes, pp.16-20, 2011.

M. C. Gutiérrez, M. A. De-paoli, and M. I. Felisberti, Biocomposites based in cellulose acetate and short curauá fibres: Effect of plasticizers and chemical treatments of the fibers, Composites: Part A, pp.1338-1346, 2012.

D. He and B. Jiang, The elastic modulus of filled polymer composites, Journal of Applied Polymer Science, pp.617-621, 1993.

A. S. Hill, H. P. Khalil, and M. D. Hale, A study of the potential of acetylation to improve the properties of plant fibers, Industrial Crops and Products, issue.97, pp.10012-10019, 1998.

J. Houbery and D. Houston, Natural-fiber-reinforced composites in automotive applications, Journal of the Minerals, Metals and Materials Society, pp.80-86, 2006.

K. Huang, K. Zhang, G. Zhang, X. Jiang, and D. Huang, Acetylation modification of rice straw fiber and its thermal properties. Cellulose Chemistry and Technology, pp.199-207, 2011.

U. Hujuri, S. K. Chattopadhay, R. Uppaluri, and A. K. Ghoshal, Effect of maleic anhydride grafted polypropylene on the mechanical and morphological properties of chemically modified short-pineapple-leaf-fiber-reinforced polypropylene composites, Journal of Applied Polymer Science, pp.1507-1516, 2008.

M. Jacob, S. Thomas, and K. T. Varughese, Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites, Composites Science and Technology, pp.955-965, 2004.

A. Jähn, M. W. Schröder, M. Füting, K. Schenzel, and W. Diepenbrock, Characterization of alkali treated flax fibres by means of FT Raman spectroscopy and environmental scanning electron microscopy

, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, pp.697-704, 2002.

M. Jawaid, H. P. Abdul-khalil, A. Hassan, R. Dungani, and A. Hadiyane, Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites, Composites: Part B, pp.619-624, 2013.

M. J. John and R. D. Anandjiwala, Chemical modification of flax reinforced polypropylene composites, Composites Part A: Applied Science and Manufacturing, pp.442-448, 2009.

M. J. John and R. D. Anandjiwala, Recent developments in chemical modification and characterization of natural-fiber reinforced composites, Polymer Composites, pp.187-207, 2008.

S. Kalia, B. S. Kaith, and I. Kaur, Pretreatments of natural fibers and their application as reforcing material in polymer composites: a review, Polymer Engineering & Science, pp.1253-1272, 2009.

F. J. Kilzer, Thermal degradation of cellulose, High polymers, pp.1015-1031, 1971.

S. H. Kim, S. Kim, J. H. Kim, and S. H. Yang, Thermal properties of bio-flour-filled polyolefin composites with different compatibilizing agent type and content

, Thermochimica Acta, vol.451, pp.181-188, 2006.

U. J. Kim, S. H. Eom, and M. Wada, Thermal decomposition of native cellulose: influence of crystallite size, pp.778-781, 2010.

E. Klata, S. Borysiak, . Van-der, K. Velde, J. Garbarczyk et al., Crystallinity of polyamide-6 matrix in glass fibre/polyamide-6 composites manufactured from hybrid yarns. Fibriles & Textiles in Eastern Europe, pp.64-68, 2004.

A. L. Leão, Fibra de curauá: uma alternativa na produção de termoplásticos reforçados, pp.214-229, 2001.

M. L. Le-moigne, Mecanismes de gonflement et de dissolution des fibres de cellulose, pp.10-14, 2009.
URL : https://hal.archives-ouvertes.fr/tel-00353429

O. Lerouxel, D. M. Cavalier, A. H. Liepman, and K. Keegstra, Biosynthesis of plant cell wall polysaccharides -a complex process, Current Opinion in Plant Biology, pp.621-625, 2006.

G. Marsh, Next step for the automotive materials. Materials Today, pp.36-43, 2003.

S. Mishra, M. Misra, S. S. Tripathy, S. K. Nayak, and A. K. Mohanty, Graft copolymerization of acrylonitrile on chemically modified sisal fibers, Macromolecular Materials and Engineering, pp.107-113, 2001.

S. Mishra, M. Misra, S. S. Tripathy, S. K. Nayak, and A. K. Mohanty, The influence of chemical surface modification on the performance of sisal-polyester biocomposites, Polymer Composites, pp.164-170, 2002.

S. Mishra, A. K. Mohanty, L. T. Drzal, M. Misra, and G. Hinrichsen, A review of pineapple leaf fibers, sisal fibers and their biocomposites

, Macromolecular Materials and Engineering, pp.955-974, 2004.

S. Mishra, A. K. Mohanty, L. T. Drzal, M. Misra, S. Parija et al., Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites. Composites Science and Technology, pp.84-92, 2003.

A. K. Mohanty, Biofibres biodegradable polymers and biocomposites: an overview. Macromolecular Materials and Engineering, vol.2, pp.1-24, 2000.

A. K. Mohanty, S. Misra, and L. T. Drzal, Surface modifications of natural fibers and performance of the resulting biocomposites: an overview. Composites Interface, pp.313-343, 2001.

J. I. Morán, V. A. Alvarez, V. P. Cyras, and A. Vázquez, Extraction of cellulose and preparation of nanocelulose from sisal fibers. Cellulose, pp.149-159, 2008.

W. H. Morrison-iii, D. D. Archibald, H. S. Sharma, and D. E. Akin, Chemical and physical characterization of water and dew-retted flax fibers, Industrial Crops and Products, pp.39-46, 2000.

C. G. Mothé and C. R. Araújo, Caracterização térmica e mecânica de compósitos de poliuretano com fibras de curauá, Polímeros: Ciência e Tecnologia, vol.4, pp.274-278, 2004.

L. Y. Mwaikambo and M. P. Ansell, The effect of chemical treatment on the properties of hemp, sisal, jute and kapok fibres for composite reinforcement, Macromolecular Materials and Engineering, vol.2, issue.9, pp.108-116

K. C. Nair, S. ;. Thomas, and . Groeninckx, Thermal and dynamic mechanical analysis of polystyrene composites reinforced with short sisal fibres, Composites Science and Technology, pp.2519-2529, 2001.

A. N. Netravali and S. Chabba, Composites get greener. Materials Today, pp.22-29, 2003.

J. Nickel and U. Riedel, Activities in biocomposites. Materials Today, pp.44-48, 2003.

N. Olaru, L. Olaru, V. Vasile, and P. Ander, Surface modified cellulose obtained by acetylation without solvents of bleached and unbleached kraft pulps, Available in < www.ichp.pl/attach.php?id=1201 >. Access on, vol.56, pp.834-840, 2011.

J. M. Park, P. G. Kim, J. H. Jang, Z. Wang, B. S. Hwang et al., Interfacial evaluation and durability of modified jute fibers/polypropylene composites using micromechanical test and acoustic emission, Composites Part B: Engineering, pp.1042-1061, 2008.

A. Paul, K. Joseph, and S. Thomas, Effect of surface treatments on the electrical properties of low-density polyethylene composites reinforced with short sisal fibers, Composites Science and Technology, pp.67-79, 1997.

T. Peijs, Composites for recyclability. Materials Today, pp.30-35, 2003.

M. Poletto, A. J. Zattera, M. M. Forte, and R. M. Santana, Thermal decomposition of wood: influence of wood components and cellulose crystallite size, Bioresource Technology, pp.148-153, 2011.

A. Rajesh and R. Kozlowski, Proceedings of international conference on textiles for sustainable developments, pp.23-27, 2005.

A. K. Rana, R. K. Basak, B. C. Mitra, M. Lawther, and A. N. Banerjee, Studies of acetylation of jute using simplified procedure and its characterization, Journal of Applied Polymer Science, pp.1517-1523, 1997.

D. Ray, B. K. Sarkar, A. K. Rana, and N. R. Bose, Effect of alkali treated jute fibres on composites properties, Bulletin of Materials Science, pp.129-135, 2001.

P. Rippert, J. Puyaubert, D. Grisollet, L. Derrier, and M. Matringe, Tyrosine and phenylalanine are synthesized within the plastids in Arabidopsis, Plant Physiology, pp.1251-1260, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00370374

D. ;. Romanzini, L. Ornaghi-h, S. C. Alico, and A. J. Zattera, Influence of fiber hybridization on the dynamic mechanical properties of glass/ramie fiberreinforced polyester composites, Journal of Reinforced Plastic Composites, pp.1652-1661, 2012.

M. Z. Rong, M. Q. Zhang, Y. Liu, G. C. Yang, and H. M. Zeng, The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites, Composites Science and Technology, pp.1437-1447, 2001.

M. F. Rosa, E. S. Medeiros, J. A. Malmonge, K. S. Gregorski, D. F. Wood et al., Cellulose nanowhiskers from coconut husk fibers: Effect of preparation conditions on their thermal and morphological behaviour. Carbohydrate Polymers, pp.83-92, 2010.

M. Y. Samir, F. Aloin, and A. Dufresne, Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field, Biomacromolecules, pp.612-626, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00014354

P. A. Santos, M. A. Spinacé, K. K. Fermoselli, and M. A. De-paoli, Polyamide-6/vegetal fiber composite prepared by extrusion and injection molding, Composites Part A: Applied Science and Manufacturing, pp.2404-2411, 2007.

T. G. Schuh, Available in <www.ienica.net/fibresseminar/schuh, 2010.

F. Shafizadeh, Introduction to pyrolysis of biomass, Journal of Analytical and Applied Pyrolysis, issue.82, p.80017, 1982.

F. Shafizadeh and A. G. Bradbury, Thermal degradation of cellulose in air and nitrogen at low temperatures, Journal of Applied Polymer Science, pp.1431-1442, 1979.

A. Shams-nateri and M. Mohajerani, Evaluation of cotton fibers stickness by colorimetric method. Progress in Color, Colorants and Coatings, ?ID=300806 >. Access on 10 Jul, pp.9-15, 2013.

D. K. Shen and S. Gu, The mechanism of thermal decomposition of cellulose and its main products, Bioresource Technology, p.6496, 2009.

H. S. Silva, Development of polymeric composites with curauá fibers and hybrids with glass fibers. 2010. 72 p. Master"s Dissertation -University of, 2010.

R. V. Silva, E. M. Aquino, and . Curauá, Fiber: A New Alternative to Polymeric Composites, Journal of Reinforced Plastics and Composites, pp.1-10, 2007.

S. Soares, G. Camino, and S. Levchik, Comparative study of the thermal decomposition of pure cellulose and pulp paper, pp.275-283, 1995.

M. A. Spinacé, K. K. Fermoselli, and M. A. De-paoli, Effect of coupling agent in composites of post-consumed PP reinforced with curauá fiber, Proceedings of the polymer processing symposium -Americas Regional Meeting. Florianopolis, pp.48-57, 2004.

. M. Sreekala, M. G. Kumaran, S. Joseph, M. Jacob, and S. Thomas, Oil palm fiber reinforced phenol formaldehyde composites: influence of fiber surface modifications on the mechanical performance, pp.295-329, 2000.

. M. Sreekala and S. Thomas, Effect of fibre surface modification on watersorption characteristics of oil palm fibres, Composites Science and Technology, pp.270-271, 2003.

S. Taj, M. A. Munawar, and S. Khan, Natural fiber-reinforced polymer composites, The Proceedings of the Pakistan Academy of Sciences, vol.44, pp.129-144, 2007.

M. Tajvidi and M. Feizmand, Effect of cellulose fiber reinforcement on the temperature dependent mechanical performance of nylon 6, Journal of Reinforced Plastics and Composites, pp.2781-2790, 2009.

W. G. Trindade, W. Hoareau, J. D. Megiatto, I. A. Razera, A. Castellan et al., Thermoset phenolic matrices reinforced with unmodified and modified surface-grafted furfuryl alcohol sugar cane bagasse and curauá fibers: properties of fibers and composites, Biomacromolecules, issue.6, pp.2485-2496, 2005.

V. Tserki, N. E. Zafeiropoulos, F. Simon, and C. Panayiotou, A study of the effect of acetylation and propionylation surface treatments on natural fibres, Composites: Part A, pp.1110-1118, 2005.

H. Unal, Morphology and mechanical properties of composites based on polyamide 6 and mineral additives, Materials & Design, pp.483-487, 2004.

A. Valadez-gonzalez, J. M. Cervantes-uc, R. Olayo, and P. J. Herrera-franco, Effect of fiber surface treatment on the fiber-matrix bond strength of natural fiber reinforced composites, Composites Part B: Engineering, pp.309-320, 1999.

I. Van-der-weyenberg, J. ;. Ivens, A. De-coster, B. Kino, E. Baetens et al., Influence of processing and chemical treatment of flax fibres on their composites, Composites Science and Technology, pp.1241-1246, 2003.

R. Vanholme, B. Demedts, K. Morreel, J. Ralph, and W. Boerjan, Lignin biosynthesis and structure, Plant Physiology, p.895, 2010.

M. Wada, R. Hori, U. J. Kim, and S. Sasaki, X-ray diffraction study on the thermal expansion behavior of cellulose I? and its high-temperature phase, pp.1330-1334, 2010.

I. V. Weyenberg, B. Truong, B. Vangrimde, and I. Verpoest, Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment, Composites Part A: Applied Science and Manufacturing, pp.1368-1376, 2006.

Y. Xie, C. A. Hill, Z. Xiao, H. Militz, and C. Mai, Silane coupling agents used for natural fiber/polymer composites: A review, Composites: Part A, pp.806-819, 2010.

X. Xu, Cellulose fiber reinforced nylon 6 or nylon 66 composites, pp.72-74, 2008.

, % of NBBSA DMA curves of PA 66 + 2.5 wt. % of LiCl + 2.5 wt. % of NBBSA -1 st replication DMA curves of PA 66 + 2.5 wt. % of LiCl + 2.5 wt. % of NBBSA -2 nd replication DMA curves of PA 66 + 2.5 wt. % of LiCl + 2.5 wt. % of NBBSA -3 rd replication APPENDIX C -DSC CURVES PA 66 WITH DIFFERENT FORMULATIONS DSC curves of PA 66 + 5.0 wt. % of LiCl + 5.0 wt. % of NBBSA DSC curves of PA 66 + 2, DMA curves of PA 66 + 5.0 wt. % of LiCl + 5.0 wt

M. F. Marques, R. P. Melo, R. S. Araujo, J. N. Lunz, and V. O. Aguiar, Improvement of mechanical properties of natural fiber-polypropylene composites using successive alkaline treatments, Journal of Applied Polymer Science, vol.132, 2015.

, International Conference

R. P. Melo, M. F. Marques, P. Navard, and D. Fromonteil, Thermal behavior and degradation studies of treated natural fibers and microcrystalline cellulose in composites with polyamide 6". The 3rd International Polysaccharide Conference EPNOE 2013 "Polysaccharides and polysaccharide-derived products, from basic science to applications, pp.22-26, 2013.

R. Melo, M. Marques, P. Navard, N. Penedo, D. Fromonteil-&quot;procédé et al., , 2013.